Aerosolization of protein solutions using thermal inkjet technology

Vapotronics Inc. is developing the thermal inkjet (TIJ) technology used extensively in the printer industry to create a digital aerosol inhaler for the inhalation of therapeutics for local and systemic delivery. The operation of thermal inkjet printers requires generation of high temperatures and vaporization of the liquid formulation to effect droplet ejection. A study was conducted to develop formulations that would permit the generation of aerosols of therapeutic proteins without damage to the inkjet system or degradation of the proteins. Two proteins, human growth hormone and insulin, were formulated and aerosolized. The aerosol was collected and subjected to assays to compare the physicochemical and biological activities of these proteins before and after aerosolization. In each case, there was no significant changes to the proteins as a result of the aerosolization, providing evidence that TIJ can be used for aerosolizing solutions of protein therapeutics.

Sequencing batch reactor technology: the key to a BP refinery (Bulwer Island) upgraded environmental protection system - a low cost lagoon based retro-fit

BP Refinery (Bulwer Island) Ltd (BP) located on the eastern Australian coast is currently undergoing a major expansion as a part of the Queensland Clean Fuels Project. The associated wastewater treatment plant upgrade will provide a better quality of treated effluent than is currently possible with the existing infrastructure, and which will be of a sufficiently high standard to meet not only the requirements of imposed environmental legislation but also BP's environmental objectives. A number of challenges were faced when considering the upgrade, particularly; cost constraints and limited plot space, highly variable wastewater, toxicity issues, and limited available hydraulic head. Sequencing Batch Reactor (SBR) Technology was chosen for the lagoon upgrade based on the following; SBR technology allowed a retro-fit of the existing earthen lagoon without the need for any additional substantial concrete structures, a dual lagoon system allowed partial treatment of wastewaters during construction, SBRs give substantial process flexibility, SBRs have the ability to easily modify process parameters without any physical modifications, and significant cost benefits. This paper presents the background to this application, an outline of laboratory studies carried out on the wastewater and details the full scale design issues and methods for providing a cost effective, efficient treatment system using the existing lagoon system.

Narrating the guillotine: Punishment technology as myth and symbol

The work of Michel Foucault sees modern penal technology its ann expression of power that operates through and is motivated by a dry instrumental reason. This article draws upon Durkheim and Bakhtin to advance a radically alternative approach. It is suggested that such technology is invested with sacred and profane symbolism and is understood via emotionally charged, dramatically compelling narrative frames. Tensions between official and unauthorized discourses can be understood through a center/periphery model of culture. In an extended case study of the guillotine, it is shown dial the apparatus was initially legitimated as an expression of a sacred revolutionary code. Such a discourse was subsequently destabilized by popular medical debates that raised the specter of pain after decapitation. While inconclusive, these new motifs mobilized Gothic and grotesque themes that confronted the rationalist aesthetics of the guillotine. A situation of Bakhtinian hetoroglossia eventuated. Uncertainty, the uncanny and fable entered a discursive field of increasing complexity.

Left ventricular dyssynchrony predicts benefit of cardiac resynchronization therapy in patients with end-stage heart failure before pacemaker implantation

We evaluated patients with end-stage heart failure who have a high likelihood of response to cardiac resynchronization therapy (biventricular pacing). It appears that 20% of patients do not respond to this expensive therapy despite the use of selection criteria (dilated cardiomyopathy, heart failure, New York Heart Association class II or IV, left ventricular election fraction 120 ms). The presence of left ventricular dys-synchrony is needed to result in improvement after cardiac resynchronization therapy. (C)2003 by Excerpta Medica, Inc.

In situ characterization of stickiness of sugar-rich foods using a linear actuator driven stickiness testing device

A stickiness testing device based on the probe tack test has been designed and tested. It was used to perform in situ characterization of drying hemispherical drops with an initial radius 3.5 mm. Tests were carried out in two drying temperatures, 63 and 95 degreesC. Moisture and temperature histories of the drying drops of fructose, honey, sucrose, maltodextrin and sucrose-maltodextrin mixtures were determined. The rates of moisture evaporation of the fructose solution was the fastest while those of the maltodextrin solution was the lowest. A profile reversal was observed when the temperature profiles of these materials were compared. Different modes of failure were observed during the stickiness tests. Pure fructose and honey solutions remained completely sticky and failed cohesively until the end of drying. Pure sucrose solution remained sticky and failed cohesively until complete crystallization occurred. The surface of the maltodextrin drops formed a skin shortly after the start of drying. It exhibited adhesive failure and reached a state of non-adhesion. Addition of maltodextrin significantly altered the stickiness of sucrose solution. (C) 2002 Elsevier Science Ltd. All rights reserved.

New structure formation on gamma-irradiation of poly(chlorotrifluoroethylene)

The radiation chemistry of PCTFE at different temperatures has been studied. The polymer was irradiated under vacuum to absorbed doses of up to 1500 kGy. Three irradiation temperatures were chosen. These included ambient temperature, a temperature well above the T, and a temperature above the crystalline melting temperature. These were 298, 423 and 493 K, respectively. The formation of new structures was identified by solid-state FTIR and F-19 NMR. No branching was observed below the melting temperature, but branches were observed above the melting temperature. G-values for chain-end formation were 1.5 and 2.4 at room temperature and 423 K, respectively and the G-value for the formation of double bonds was found to be < 0.1. For the irradiations at 493 K, the G-values for the formation of chain ends, double bonds and branching points were 3.6, 0.2 and 0.5, respectively. The presence of long-chain branches within the polymer structure could not be proven for radiolysis at 493 K, but scission predominates and network formation does not occur upon irradiation. DSC studies of the polymers irradiated at ambient temperature were consistent with chain scission leading to an increase in the percentage crystallinity, as observed for other fluoropolymers. (C) 2003 Elsevier Science Ltd. All rights reserved.

A study of the radiation chemistry of poly(chlorotrifluoroethylene) by ESR spectroscopy

The ESR spectra of poly(chlorotrifluoroethylene) were recorded following gamma-radiolysis under vacuum at room temperature and 77 K. The very broad spectrum at 77 K revealed little fine structure with which to identity the radicals formed upon irradiation, but subsequent photobleaching and annealing studies, together with radiolytic studies at higher temperatures, afforded scope for making radical assignments. Both main-chain radicals and a range of chain-end radicals have been identified. The G-values for radical formation were 1.55, 0.36 and 0.32 at 77 K, 273 K and room temperature, respectively. (C) 2003 Elsevier Science Ltd. All rights reserved.

Uso de tecnologias de informa????o e comunica????o na gest??o p??blica: exemplos no governo federal

A administra????o p??blica passou por diversas mudan??as nos ??ltimos 30 anos. Parte dessas altera????es tem origem nas oportunidades criadas pelas inova????es tecnol??gicas. O objetivo deste trabalho ?? apresentar como tem sido o uso de tecnologias da informa????o e comunica????o (TICs) nas inova????es promovidas na administra????o p??blica federal brasileira. Para tanto, tomamos como base a descri????o de cinco experi??ncias inovadoras em TIC premiadas nos concursos anuais Inova????o na Gest??o P??blica Federal, realizados pela Escola Nacional de Administra????o P??blica (ENAP): o Portal da Transpar??ncia da Controladoria-Geral da Uni??o (CGU); o Programa Nacional do Livro Did??tico; o uso dos computadores de m??o pelo Instituto Brasileiro de Geografia e Estat??stica (IBGE); a entrega da Declara????o do Imposto de Renda via internet; e a utiliza????o de urnas eletr??nicas nas elei????es brasileiras. A despeito da relev??ncia dos avan??os do governo eletr??nico brasileiro at?? aqui, medidas de aprimoramento da intera????o entre os diversos ??rg??os p??blicos e tamb??m das pol??ticas p??blicas de inclus??o digital ainda se fazem necess??rias.

O trabalho e a competência industriosa no beneficiamento de granitos : uma cartografia ergológica

O intuito inicial desta pesquisa foi acompanhar processos de trabalho à luz do referencial teórico da Ergologia e, portanto, concebendo o trabalho como relação dialética entre técnica e ação humana. O objetivo era cartografar o trabalho no processo de beneficiamento de granitos em uma organização de grande porte localizada no Espírito Santo e, após algum tempo em campo, o problema delineou- se do seguinte modo: como se constitui a competência industriosa no beneficiamento de granitos em uma organização de grande porte? A pesquisa justifica-se uma vez que, a despeito da relevância econômica, o cenário capixaba de rochas ornamentais apresenta problemas precários no que diz respeito à gestão. Para os Estudos Organizacionais, a relevância é reforçada pelo fato de aproximar desta área a abordagem ergológica e demarcar no debate sobre competência a noção de competência industriosa, ainda não explorada nesse campo de estudo. Para realização da pesquisa, foi praticada uma cartografia ergológica, a partir da articulação das pistas cartográficas com o referencial teórico-conceitual da Ergologia, sendo utilizadas como técnicas: observação participante durante 6 meses, com uma média de 3 visitas a campo por semana; 8 entrevistas semiestruturadas e em profundidade de cerca de 50 minutos cada com trabalhadores operacionais; uma entrevista com gerente de produção e outra com representante da área de Gestão de Pessoas; conversas com os demais trabalhadores, a fim de enriquecer o diário de campo; novas conversas e observações ao final da análise, para confrontação-validação com os trabalhadores. A sistematização dos procedimentos de análise pode ser assim descrita: a) leituras flutuantes com objetivo de fazer emergirem aspectos centrais relacionados às duas dimensões do trabalho, técnica e ação humana; b) leituras em profundidade com objetivo de fazer emergirem singularidades e especificidades relativas à dialética entre ambas; c) leituras em profundidade com objetivo de fazer emergirem aspectos relativos aos ingredientes da competência industriosa. A despeito da não delimitação de categorias analíticas e subcategorias, a partir da análise emergiram cinco eixos analíticos: 1) os procedimentos a serem empregados no processo de beneficiamento de granitos, englobando: as etapas do beneficiamento; as funções a serem desempenhadas e as tarefas a serem desenvolvidas; as normas regulamentadoras; os conhecimentos técnicos necessários para programação e operação de máquinas; a ordem de produção prescrita pelo setor comercial; 2) o trabalho real, diferenciado do trabalho como emprego de procedimentos pelo foco dado à ação humana no enfrentamento de situações reais, repletas de eventos e variabilidades, em todo o processo, englobando: preparo de carga; laminação; serrada; levigamento; resinagem; polimento-classificação; retoque; fechamento de pacote; ovada de contêiner; 3) diferentes modos de usos de si que, em tendência, são responsáveis pela constituição do agir em competência em cada etapa do processo, na dialética entre técnica e ação humana; 4) o modo como cada ingrediente da competência industriosa atua e se constitui, bem como sua concentração, em tendência, em cada etapa do processo, a partir dos tipos de usos de si que, também em tendência, são mais responsáveis pelo agir em competência, apresentando assim o perfil da competência industriosa no beneficiamento de granitos na empresa em análise; 5) dois possíveis fatores potencializadores dos ingredientes da competência industriosa, a saber, a transdução e os não-humanos. A partir de todo o exposto, as últimas considerações problematizam aspectos relativos ao debate sobre competências e práticas de gestão de pessoas a partir da competência compreendida da seguinte forma: mestria no ato de tirar partido do meio e de si para gerir situações de trabalho, em que a ação consiste na mobilização de recursos dificilmente perceptíveis e descritíveis, inerentes ao trabalhador, porém constituídos e manifestos por usos de si por si e pelos outros no e para o ato real de trabalho, marcadamente num nível infinitesimal, diante de situações que demandam aplicação de protocolos concomitante à gestão de variabilidades e eventos em parte inantecipáveis e inelimináveis.