Design of advanced reverse osmosis and nanofiltration membranes for water purification

Most commercially available reverse osmosis (RO) and nanofiltration (NF) membranes are based on the thin film composite (TFC) aromatic polyamide membranes. However, they have several disadvantages including low resistance to fouling, low chemical and thermal stabilities and limited chlorine tolerance. To address these problems, advanced RO/NF membranes are being developed from polyimides for water and wastewater treatments. The following three projects have resulted from my research. (1) Positively charged and solvent resistant NF membranes. The use of solvent resistant membranes to facilitate small molecule separations has been a long standing industry goal of the chemical and pharmaceutical industries. We developed a solvent resistant membrane by chemically cross-linking of polyimide membrane using polyethylenimine. This membrane showed excellent stability in almost all organic solvents. In addition, this membrane was positively charged due to the amine groups remaining on the surface. As a result, high efficiency (> 95%) and selectivity for multivalent heavy metal removal was achieved. (2) Fouling resistant NF membranes. Antifouling membranes are highly desired for “all” applications because fouling will lead to higher energy demand, increase of cleaning and corresponding down time and reduced life-time of the membrane elements. For fouling prevention, we designed a new membrane system using a coating technique to modify membrane surface properties to avoid adsorption of foulants like humic acid. A layer of water-soluble polymer such as polyvinyl alcohol (PVA), polyacrylic acid (PAA), polyvinyl sulfate (PVS) or sulfonated poly(ether ether ketone) (SPEEK), was adsorbed onto the surface of a positively charged membrane. The resultant membranes have a smooth and almost neutrally charged surface which showed better fouling resistance than both the positively charged NF membranes and commercially available negatively charged NTR-7450 membrane. In addition, these membranes showed high efficiency for removal of multivalent ions (> 95% for both cations and anions). Therefore, these antifouling surfaces can be potentially used for water softening, water desalination and wastewater treatment in a membrane bioreactor (MBR) process. (3) Thermally stable RO membranes. Commercial RO membranes cannot be used at temperature higher than 45°C due to the use of polysulfone substrate, which often limits their applications in industries. We successfully developed polyimides as the membrane substrate for thermally stable RO membranes due to their high thermal resistance. The polyimide-based composite polyamide membranes showed desalination performance comparable to the commercial TFC membrane. However, the key advantage of the polyimide-based membrane is its high thermal stability. As the feed temperature increased from 25oC to 95oC, the water flux increased 5 - 6 times while the salt rejection almost kept constant. This membrane appears to provide a unique solution for hot water desalination and also a feasible way to improve the water productivity by increasing the operating temperature without any drop in salt rejection.

Estudo da secagem da flor de cardo e análise de polissacarídeos e composto fenólicos

A qualidade dos produtos alimentares e a sua influência sobre a nutrição e a saúde humana tem vindo a merecer um lugar de destaque na comunidade científica. O conceito de alimento funcional tem adquirido grande importância hoje em dia, em particular os alimentos com compostos bioactivos. O Cardo (Cynara cardunculus L.) é uma planta herbácea originária da região mediterrânea usada essencialmente na coagulação do leite, e por muitos considerada um medicamento popular, devido aos seus efeitos terapêuticos. Este trabalho teve como objectivo estudar o efeito de diferentes condições de secagem da flor de cardo, na composição em ácidos fenólicos, bem como em polissacarídeos. Era ainda objectivo tentar identificar possíveis compostos que pudessem ser utilizados como marcadores de autenticidade do queijo da serra. Neste trabalho foi usada uma amostra de flor de cardo liofilizado e três amostras secadas, a diferentes temperaturas (40, 50 e 60ºC). A análise do resíduo sólido da flor do cardo, por cromatografia gasosa, permitiu identificar a presença de açúcares constituintes de polissacarídeos pécticos. A análise por HPLC, dos extratos metanólicos e cetónicos, revelaram a presença de ácidos hidroxibenzóicos e hidroxicinâmicos na flor do cardo. A amostra mais rica nestes compostos foi a amostra secada a 50ºC. O aumento da temperatura de secagem originou uma diminuição de ácidos fenólicos.

In vitro studies of drug transformations: application to forensic toxicology

The forensic toxicologist faces challenges in the detection of drugs and poisons in biological samples due to transformations which occur both during life and after death. For example, changes can result from drug metabolism during life or from the use of formalin solution for post mortem embalming purposes. The former requires the identification of drug metabolites and the latter the identification of chemical reaction products in order to know which substances had been administered. The work described in this thesis was aimed at providing ways of tackling these challenges and was divided into two parts. Part 1 investigated the use of in vitro drug metabolism by human liver microsomes (HLM) to obtain information on drug metabolites and Part 2 investigated the chemical reactions of drugs and a carbamate pesticide with formalin solution and formalin-blood. The initial aim of part I was to develop an in vitro metabolism method using HLM, based on a literature review of previous studies of this type. MDMA was chosen as a model compound to develop the HLM method because its metabolism was known and standards of its metabolites were commercially available. In addition, a sensitive and selective method was developed for the identification and quantitation of hydrophilic phase I drug metabolites using LC/MS/MS with a conventional reverse-phase (C18) column. In order to obtain suitable retention factors for polar drug metabolites on this column, acetyl derivatives were evaluated for converting the metabolites to more lipophilic compounds and an optimal separation system was developed. Acetate derivatives were found to be stable in the HPLC mobile phase and to provide good chromatographic separation of the target analytes. In vitro metabolism of MDMA and, subsequently, of other drugs involved incubation of 4 µg drug substance in pH 7.4 buffer with an NADPH generating system (NGS) at 37oC for 90 min with addition of more NGS after 30 min. The reaction was stopped at 90 min by the addition of acetonitrile before extraction of the metabolites. Acetate derivatives of MDMA metabolites were identified by LC/MS/MS using multiple reaction monitoring (MRM). Three phase I metabolites (both major and minor metabolites) of MDMA were detected in HLM samples. 3,4-dihydroxy-methamphetamine and 4-hydroxy-3-methoxymethamphetamine were found to be major metabolites of MDMA whereas 3,4-methylenedioxyamphetamine was found to be a minor metabolite. Subsequently, ten MDMA positive urines were analysed to compare the metabolite patterns with those produced by HLM. An LC/MS method for MDMA and its metabolites in urine samples was developed and validated. The method demonstrated good linearity, accuracy and precision and insignificant matrix effects, with limits of quantitation of 0.025 µg/ml. Moreover, derivatives of MDMA and its metabolites were quantified in all 10 positive human urine samples. The urine metabolite pattern was found to be similar to that from HLM. The second aim of Part 1 was to use the HLM system to study the metabolism of some new psychoactive substances, whose misuse worldwide has necessitated the development of analytical methods for these drugs in biological specimens. Methylone and butylone were selected as representative cathinones and para-methoxyamphetamine (PMA) was chosen as a representative ring-substituted amphetamine, because of the involvement of these drugs in recent drug-related deaths, because of a relative lack of information on their metabolism, and because reference standards of their metabolites were not commercially available. An LC/MS/MS method for the analysis of methylone, butylone, PMA and their metabolites was developed. Three phase I metabolites of methylone and butylone were detected in HLM samples. Ketone reduction to β-OH metabolites and demethylenation to dihydroxy-metabolites were found to be major phase I metabolic pathways of butylone and methylone whereas N-demethylation to nor-methylone and nor-butylone were found to be minor pathways. Also, demethylation to para-hydroxyamphetamine was found to be a major phase I metabolic pathway of PMA whereas β-hydroxylation to β-OH-PMA was found to be a minor pathway. Formaldehyde is used for embalming, to reduce decomposition and preserve cadavers, especially in tropical countries such as Thailand. Drugs present in the body can be exposed to formaldehyde resulting in decreasing concentrations of the original compounds and production of new substances. The aim of part II of the study was to evaluate the in vitro reactions of formaldehyde with selected drug groups including amphetamines (amphetamine, methamphetamine and MDMA), benzodiazepines (alprazolam and diazepam), opiates (morphine, hydromorphone, codeine and hydrocodone) and with a carbamate insecticide (carbosulfan). The study would identify degradation products to serve as markers for the parent compounds when these were no longer detectable. Drugs standards were spiked in 10% formalin solution and 10% formalin blood. Water and whole blood without formalin were used for controls. Samples were analysed by LC/MS/MS at different times from the start, over periods of up to 30 days. Amphetamine, methamphetamine and MDMA were found to rapidly convert to methamphetamine, DMA and MDDMA respectively, in both formalin solution and formalin blood, confirming the Eschweiler-Clarke reaction between amine-containing compounds and formaldehyde. Alprazolam was found to be unstable whereas diazepam was found to be stable in both formalin solution and water. Both were found to hydrolyse in formalin solution and to give open-ring alprazolam and open-ring diazepam. Other alprazolam conversion products attached to paraformaldehyde were detected in both formalin solution and formalin blood. Morphine and codeine were found to be more stable than hydromorphone and hydrocodone in formalin solution. Conversion products of hydromorphone and hydrocodone attached to paraformaldehyde were tentatively identified in formalin solution. Moreover, hydrocodone and hydromorphone rapidly decreased within 24 h in formalin blood and could not be detected after 7 days. Carbosulfan was found to be unstable in formalin solution and was rapidly hydrolysed within 24 h, whereas in water it was stable up to 48 h. Carbofuran was the major degradation product, plus smaller amounts of other products, 3-ketocarbofuran and 3-hydrocarbofuran. By contrast, carbosulfan slowly hydrolysed in formalin-blood and was still detected after 15 days. It was concluded that HLM provide a useful tool for human drug metabolism studies when ethical considerations preclude their controlled administration to humans. The use of chemical derivatisation for hydrophilic compounds such as polar drug metabolites for analysis by LC/MS/MS with a conventional C18 column is effective and inexpensive, and suitable for routine use in the identification and quantitation of drugs and their metabolites. The detection of parent drugs and their metabolites or conversion and decomposition products is potentially very useful for the interpretation of cases in forensic toxicology, especially when the original compounds cannot be observed.

Towards the total synthesis of amphidinolides C and F

The amphidinolides are marine macrolides extracted from dinoflagellates of the genus Amphidinium. To date, 37 amphidinolides have been isolated and identified, most of them possessing cytotoxicity against human cancer cell lines. Among these, amphidinolides C, F, C2 and C3 represent synthetic targets of interest owing to their scarcity, structural complexity and promising biological activities. This thesis describes the work realised towards the total synthesis of amphidinolides C and F, with a focus on the different strategies investigated and the key fragments synthesised. In the first approach, the C18−C29 fragment of amphidinolide F was prepared using an intramolecular etherification of an epoxide under acidic catalysis to produce the 2,5-trans-disubstituted tetrahydrofuran ring featured in the natural product. Unfortunately, dithiane alkylation with the C1−C17 iodide counterpart generated the desired coupling product in low yield. A second approach proposing to build the C17−C18 bond by a silicon-tethered RCM proved unsuccessful, because the requisite diene could not be obtained. It was then envisioned to form the C18−C19 bond by displacement of a triflate with an alkyne and install the ketone at C18 by a protoborylation/oxidation sequence. To this end, the C19−C29 triflate precursor was synthesised. Displeasingly, the C1−C18 alkyne counterpart (work by Dr Filippo Romiti) could not be prepared and coupling of the two fragments was not attempted. In the latest approach, the C10−C29 fragment of amphidinolide F was obtained employing a boron-mediated aldol condensation and a dithiane alkylation to form the C13−C14 and C18−C19 bonds. Several endgame strategies were examined including the successful Yamaguchi esterification of the C13-epi C10−C29 fragment and the C1−C9 acid. A challenging Stille crosscoupling was then effected to close the macrocycle but only yielded the desired macrolactone in trace amounts after global desilylation.

Mesoporous mixed Nb2O5-ZrO2 catalysts for dehydration of glucose into 5-hydroxymethylfurfural

Biomass is the world’s most important renewable carbon source, whose major component, carbohydrates, can be valorized by transformation into biofuels and high value-added chemicals. Among the latter, 5-hydroxymethylfurfural (HMF), obtained by C6 carbohydrates dehydration, is a versatile and key intermediate for the production of a large spectrum of biobased chemicals. Different catalytic systems have been evaluated for HMF production, mostly based on heterogeneous catalysis as alternative to the use of conventional mineral acids [1]. Moreover, niobium oxide has shown interesting properties as acid catalyst for dehydration of sugars [2-3]. On the other hand, the high surface area and large pore size of mesoporous solids make them suitable for many catalytic processes. In the present work, the dehydration of glucose to HMF has been evaluated by using different mesoporous mixed Nb2O5-ZrO2 in a biphasic water–Methyl Isobutyl Ketone (MIBK) solvent system to avoid the HMF degradation. Different experimental parameters, such as reaction temperature and time, as well as the addition of CaCl2 have been studied in order to maximize the HMF yield.N2 adsorption-desorption isotherms have corroborated the mesostructured character of catalysts, being all isotherms of Type IV according to the IUPAC classification. BET surface area decreases for catalysts with higher Zr content (Table 1). Likewise, pore volume and average pore diameter values diminish after Zr incorporation. Concerning the acid properties, a clear correlation between Nb and acidity can be observed, in such a way that total acidity, as deduced from NH3-TPD, decreases when the Zr content rises, and consequently the amount of Nb is reduced.These mesoporous Nb-Zr catalysts have been tested in the dehydration of glucose to HMF at 175 ºC under batch operation in aqueous solution, using MIBK as co-solvent. It can be observed that both glucose conversion and HMF yield increase with the Nb content, being maximum (90% and 36%, respectively) after 90 minutes for Nb2O5. This trend changes when CaCl2 is added to the reaction medium, improving the catalytic performance of mixed oxides and ZrO2, but Nb2O5 maintains similar results than without salt addition. This could be justified by the interaction between CaCl2 and Lewis acid sites, since zirconium oxide possesses a higher amount of this acid sites type.

Exploring the scope of asymmetric synthesis of β-Hydroxy-γ-lactams via Noyori-type reductions

Enantio- and diastereoselective hydrogenation of β-keto-γ-lactams with a ruthenium–BINAP catalyst, involving dynamic kinetic resolution, has been employed to provide a general, asymmetric approach to β-hydroxy-γ-lactams, a structural motif common to several bioactive compounds. Full conversion to the desired β-hydroxy-γ-lactams was achieved with high diastereoselectivity (up to >98% de) by addition of catalytic HCl and LiCl, while β-branching of the ketone substituent demonstrated a pronounced effect on the modest to excellent enantioselectivity (up to 97% ee) obtained.

Controlled surface nanotopography and oxygen plasma treatment of PEEK to improve cellular response

Poly(aryl-ether-ether-ketone) (PEEK) is a semi crystalline polymer which exhibits properties that make it an attractive choice for use as an implant material. It displays natural radiolucency, and MRI compatibility, as well as good chemical and sterilization resistance, both of which make it of particular interest in orthopaedic implants. However, PEEK has demonstrated poor cellular adhesion both in vitro and in vivo. This is problematic as implant surfaces that do not develop a layer of adhesive cells are at risk of undergoing fibrous encapsulation, which in turn leads to lack of a strong interface between the implant device and the patient tissue, which can in turn lead to failure of the implant and revision surgery . As incorporating nanotopography into a polymer surface has been demonstrated to be able to direct the differentiation behaviour of stem cells, a possible solution to PEEKs underlying issues with poor cellular response would be to incorporate specific nanoscale topography into the material surface through injection moulding, and then analysing if this is a viable method for addressing PEEKs issues with cellular response. In addition to nanoscale topography, the experimental PEEK surfaces were treated with oxygen plasma to address the underlying cytophobicity of the material. As this type of treatment has been documented to be capable of etching the PEEK surface, experiments were carried out to quantify the effect of this treatment, both on the ability of cells to adhere to the PEEK surface, as well as the effect it has upon the nanotopography present at the PEEK surface. The results demonstrated that there were a range of plasma treatments which would significantly improve the ability of cells to adhere to the PEEK surface without causing unacceptable damage to the nanotopography. Three different types of cells with osteogenic capacity were tested with the PEEK surfaces to gauge the ability of the topography to alter their behaviour: SAOS-2, osteoprogenitors and 271+ MSCs. Due to PEEKs material properties (it is non transparent, exhibits birefringence and is strongly autofluorescent) a number of histological techniques were used to investigate a number of different stages that take place in osteogenesis. The different cell types did display slightly different responses to the topographies. The SAOS-2 cells cultured on surfaces that had been plasma treated for 2 minutes at 200W had statistically significantly higher levels of von Kossa staining on the NSQ surface compared to the planar surface, and the same experiment employing alizarin red staining, showed a statistically significantly lower level of staining on the SQ surface compared to the planar surface. Using primary osteoprogenitor cells designed to look into if whether or not the presence of nanotopography effected the osteogenic response of these cells, we saw a lack of statistically significant difference produced by the surfaces investigated. By utilising HRP based immunostaining, we were able to investigate, in a quantitative fashion, the production of the two osteogenic markers osteopontin and osteocalcin by cells. When stained for osteocalcin, the SQ nanotopography had total percentage of the surface with stained material, average area and average perimeter all statistically significantly lower than the planar surface. For the cells that were stained for osteopontin, the SQ nanotopgraphy had a total percentage of the surface with stained material, average area and average perimeter all highly statistically significantly lower than those of the planar surface. Additionally, for this marker the NSQ nanotopography had average areas and average perimeters that were highly significantly higher than those of the planar surface. There were no significant differences for any of the values investigated for the 271+ MSC’s When plasma treatment was varied, the SAOS-2 cells demonstrated an overall trend i.e. increasing the energy of plasma treatment in turn leads to an increase in the overall percentage of staining. A similar experiment employing stem cells isolated from human bone marrow instead of SAOS-2 cells showed that for polycarbonate surfaces , used as a control, mineralization is statistically significantly higher on the NSQ nanopattern compared to the planar surface, whereas on the PEEK surfaces we observe the opposite trend i.e. the NSQ nanotopography having a statistically significantly lower amount of mineralization compared to the planar surface at the 200W 2min and 30W 1min plasma treatments. The standout trend from the PEEK results in this experiment was that the statistically significant differences on the PEEK substrates were clustered around the lower energy plasma treatments, which could suggest that the plasma treatment disrupted a function of the nanotopograhy which is why, as the energy increases, there are less statistically significant differences between the NSQ nanotopography and the Planar surface This thesis documents the response of a number of different types of cells to specific nanoscale topographies incorporated into the PEEK surface which had been treated with oxygen plasma. It outlines the development of a number of histological methods which measure different aspects of osteogenesis, and were selected to both work with PEEK, and produce quantitative results through the use of Cell Profiler. The methods that have been employed in this body of work would be of interest to other researchers working with this material, as well as those working with similarly autofluorescent materials.

Clínica médica e cirúrgica em animais de companhia

O presente relatório foi realizado no âmbito do Mestrado Integrado de Medicina Veteri-nária, estando divido em duas partes. A primeira parte refere-se à casuística acompanhada ao longo do estágio curricular, realizado no Centro Hospitalar Veterinário do Porto, no período de-corrido entre 1 de setembro de 2015 e 29 de fevereiro de 2016. A segunda parte engloba uma monografia sobre o tema “Cetoacidose Diabética em canídeos”, incluindo ainda o relato de três casos clínicos acompanhados no decorrer do estágio. A cetoacidose diabética (CAD) é uma complicação urgente do diabetes mellitus, ocorrendo principalmente em animais nunca antes tratados com insulina de longa ação. O diagnóstico de CAD passa pela anamnese, sinais clínicos e deteção de hiperglicemia severa, glicosúria e cetonúria. O diagnóstico e tratamento de doenças concomitantes constituem o passo mais desafiante. O prognóstico depende da severidade da acidose, das doenças concomitantes e das limitações financeiras dos proprietários; Abstract: Small Animal Practice This report was carried out for the completion of the Master degree in veterinary medicine and is divided in two parts. The first part includes the accompanied cases throughout the train-eeship, which was held at the Centro Hospitalar Veterinário of Porto, between September 1st 2015 and February 29th 2016. The second part includes a monograph on "Diabetic Ketoacidosis in dogs ", including the report of three clinical cases followed during the internship. Diabetic ke-toacidosis (DKA) is an urgent complication of diabetes mellitus, occurring mainly in animals that were never treated with long-action insulin. The diagnosis of DKA involves the history, clinical signs and detection of severe hyperglycemia, glycosuria and ketonuria. The diagnosis and treat-ment of concomitant diseases are the most challenging steps. The prognosis depends on the severity of acidosis and concomitant diseases, as well as the financial restrictions of the owners.

Sugarcane herbicide leaching risk evaluation in Guarany Aquifer.

he region of Ribeirão Preto, São Paulo State, Brazil, is located over recharge area of the Guarany aquifer, the most important source of groundwater in the South Central region of the country. This region is also the most important sugarcane producing area of the country which produces a large amount of the ethanol. This study was conducted to determine the potential risk of herbicide groundwater contamination. The leaching risk potential of herbicides to groundwater was conducted using the weather simulator ?Weather Generator? (WGEN) coupled with the model ?Chemical Movement Trough Layered Soils? (CMLS94). The following herbicides were evaluated in clayey and sandy soils (Typic Haplorthox and Typic Quartzipsamment soils) found in the region: ametryn (N-ethyl-N\'-(1- methylethyl)-6-(methylthio)-1,3,5-triazine-2,4-diamine), atrazine (6-chloro-N-ethyl-N\'-(1-methylethyl)-1,3,5-triazine- 2,4-diamine), clomazone (2-[(2-chlorophenyl)methyl]-4,4-dimethyl-3-isoxazolidinone), diuron (3,4-dichlorophenyl)- N,N-dimethylurea), halosulfuron (3-chloro-5-[(4,6-dimethoxy-2-pyrimidinyl)amino]carbonyl], hexazinone (3- cyclohexyl-6-(dimethylamino)-1-methyl-1,3,5-triazine-2,4 (1H,3H)-dione), imazapic ((±)-2-[4,5-dihydro-4-methyl-4- (1-methylethyl)-5-oxo-1H-imidazol-2-yl]-5-methyl-3-pyridinecarboxylic acid), imazapyr ((±)-2-[4,5-dihydro-4-methyl- 4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl]-3-pyridinecarboxylic acid), MCPA (4-chloro-2-methylphenoxy)acetic acid), metribuzin (4-amino-6-(1,1-dimethylethyl)-3-(methylthio)-1,2,4-triazin-5(4H)-one), MSMA (Amonosodium salt of MAA), paraquat (1,1\'-dimethyl-4,4\'-bipyridinium ion), pendimethalin (N-(1-ethylpropyl)-3,4-dimethyl-2,6- dinitrobenzenamine), picloram (4-amino-3,5,6-trichloro-2-pyridinecarboxylic acid), simazine (6-chloro-N,N\'-diethyl- 1,3,5-triazine-2,4-diamine), sulfentrazone [N-[2,4-dichloro-5-[4-(difluoromethyl)-4,5-dihydro-3-methyl-5-oxo-1H- 1,2,4-triazol-1-yl]phenyl]methanesulfonamide], and tebuthiuron [N-[5-(1,1-dimethylethyl)-1,3,4-thiadiazol-2-yl]-N,N\'- dimethylurea]. Results obtained by our simulation study have shown that the herbicides picloram, tebuthiuron, and metribuzin have the highest leaching potential, in either sandy or clayey soils, with picloram reaching the root zone of sugarcane at 0.6m in less than 150 days.

Sintesi e caratterizzazione strutturale di derivati piperidinici e morfolinici chirali

The topic of this thesis concerns the study of catalytic processes for the synthesis of chiral 3,4,5-trisubstituted piperidine and 2,6-disubstituted morpholine. Substrates possessing an α,β-unsaturated ester and a ketone moiety, able to undergo addition/cyclization cascade reactions with different pro-nucleophiles (thiophenols, acetone cyanohydrin and malononitrile), have been evaluated. Chiral and achiral systems for phase-transfer catalysis have been applied as catalysts. Moderate enantiomeric excesses have been obtained for the morpholinic products and good to excellent values for the piperidinic products, by using cyclopeptoids and quaternary ammonium salts derived from Chincona alkaloids as catalysts respectively. Moreover, the absolute configuration of the 3,4,5-trisubstituted piperidines has been determined through quantomechanical simulations of their chirooptical spectra. Finally, the relative configuration of the 2,6-disubstituted morpholines has been assigned through NMR experiments.

A DFT study on chemodivergent preparation of piperidinic and morpholinic heterocycles

The topic of this thesis is the DFT computational study of the mechanisms for the synthesis of chiral 3,4,5-trisubstituted piperidines and 2,6-disubstituted morpholines. The goal of this synthesis is to use, the same substrate containing two electrophilic sites: an α,β-unsaturated ester and a ketone, which evolve according to the nucleophile used (cyanide, phenyl sulfide) through different addition and cyclization reactions. A quaternary ammonium salt is used as a catalyst for these reactions, which leads to a diastereoisomeric excess both for the reactions of morpholine and piperidine products. Studies in silico of the pathways of these reactions explain the chemoselection and diasteroselection deriving from the two nucleophiles used. In this case of piperidine products, it was also possible to validate the hypothesis of a concerted nucleophilic addition mechanism on the α,β-unsaturated site and cyclization due to an intramolecular Michael addition.

Study of the urinary biomarkers of synthetic cannabinoid receptor agonists (SCRAs) for the forensic unequivocal proof of consumption: medico-legal implications for drug abuse prevention

Introduction. Synthetic cannabinoid receptor agonists (SCRAs) represent the widest group of New Psychoactive Substances (NPS) and, around 2021-2022, new compounds emerged on the market. The aims of the present research were to identify suitable urinary markers of Cumyl-CB-MEGACLONE, Cumyl-NB-MEGACLONE, Cumyl-NB-MINACA, 5F-EDMB-PICA, EDMB-PINACA and ADB-HEXINACA, to present data on their prevalence and to adapt the methodology from the University of Freiburg to the University of Bologna. Materials and methods. Human phase-I metabolites detected in 46 authentic urine samples were confirmed in vitro with pooled human liver microsomes (pHLM) assays, analyzed by liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-qToF-MS). Prevalence data were obtained from urines collected for abstinence control programs. The method to study SCRAs metabolism in use at the University of Freiburg was adapted to the local facilities, tested in vitro with 5F-EDMB-PICA and applied to the study of ADB-HEXINACA metabolism. Results. Metabolites built by mono, di- and tri-hydroxylation were recommended as specific urinary biomarkers to monitor the consumption of SCRAs bearing a cumyl moiety. Monohydroxylated and defluorinated metabolites were suitable proof of 5F-EDMB-PICA consumption. Products of monohydroxylation and amide or ester hydrolysis, coupled to monohydroxylation or ketone formation, were recognized as specific markers for EDMB-PINACA and ADB-HEXINACA. The LC-qToF-MS method was successfully adapted to the University of Bologna, as tested with 5F-EDMB-PICA in vitro metabolites. Prevalence data showed that 5F-EDMB-PINACA and EDMB-PINACA were more prevalent than ADB-HEXINACA, but for a limited period. Conclusion. Due to undetectability of parent compounds in urines and to shared metabolites among structurally related compounds, the identification of specific urinary biomarkers as unequivocal proofs of SCRAs consumption remains challenging for forensic laboratories. Urinary biomarkers are necessary to monitor SCRAs abuse and prevalence data could help in establishing tailored strategies to prevent their spreading, highlighting the role for legal medicine as a service to public health.

Effetto della porosità sulle proprietà meccaniche e osteoinduttive di biomateriali utili per l’ingegneria del tessuto osseo

L'elaborato tratta dell'effetto della porosità sulle proprietà meccaniche e osteoinduttive di un biomateriale utilizzabile in ingegneria del tessuto osseo, per come questo è stato valutato nello studio "Surface porous poly-ether-ether-ketone based on three-dimensional printing for load-bearing orthopedic implant" condotto dai ricercatori Shuai Li, Tianyu Wang, Jiqiang Hu, Zhibin Li, Bing Wang, Lianchao Wang e Zhengong Zhou. In particolare, il biomateriale studiato è rappresentato dal “PEEK”, un polimero termoplastico che viene lavorato, tramite stampante 3D a filamento, in modo da presentare una struttura che include un corpo centrale solido ricoperto da strati porosi sia nello strato superiore sia in quello inferiore. Per la valutazione delle proprietà meccaniche sono state svolte una prova a trazione e una prova a flessione. I valori ottenuti sperimentalmente sono stati confrontati con quelli ottenuti da un’analisi numerica e da un modello teorico. Per la valutazione delle proprietà osteoinduttive sono stati condotti test di proliferazione cellulare e differenziamento osteogenico. I risultati ottenuti concludono che specifici valori della porosità superficiale del biomateriale presentano proprietà meccaniche e osteoinduttive che lo rendono idoneo all’utilizzo come impianto osteogenico in ingegneria tissutale.