Analysis of Body Composition and Food Habits of Spanish Celiac Women

The purpose of the present work was both to analyze composition of Spanish celiac women and to study the food habits and gluten-free diet of these celiac patients, in order to determine whether they achieve a balanced and healthy diet as well as to highlight nutritional qualitative and/or quantitative differences. 54 adult celiac women (34 +/- 13 years) took part in the six-month study. Height, weight and body composition were measured. An analysis of energy consumption and of the macronutrient distribution of their diet was carried out. Their fulfillment of micronutrient intake recommendations was verified. Participants showed a Body Mass Index of 21.6 +/- 2.4 kg/m(2). Energy Intake was slightly lower than the Dietary Reference Intakes. Excessive protein apart from over-consumption of fat was observed. More than three quarters of participants consumed meat in excess. Carbohydrate consumption along with that of fiber was below recommended levels. Vitamin D, iron, and iodine had a low percentage of recommendation compliance. In general, participants followed the recommendations of dairy products and fruit intake whereas vegetable consumption was not enough for the vast majority. We conclude that although the diet of celiac women does not differ much from the diet of general population, some considerations, such as reducing fat and protein consumption and increasing fiber intake, must be taken into account.

Preparação e avaliação de resinas biocidas impregnadas com iodo a partir de resinas comerciais de estireno e divinilbenzeno

Neste trabalho, foram empregadas duas resinas comerciais de caráter fortemente básico. Ambas tendo como base copolímeros de estireno e divinilbenzeno (DVB), sendo que a VPOC 1950 contém em sua composição grupos quaternários de amônio do tipo 1, que apresentam três grupos metila e a VPOC 1960 grupos quaternários de amônio do tipo 2, que apresentam um grupo etanoíla e dois grupos metila. As resinas comerciais citadas foram escolhidas por apresentarem grande capacidade de troca iônica, estabilidade e grupos funcionais de interesse para a impregnação com iodo. As resinas foram impregnadas com iodo por meio de três metodologias distintas, uma solução metanólica de iodo 0,08 mol/L com e sem iodeto de potássio 0,14 mol/L, e iodo 0,08 mol/L em heptano. As resinas foram caracterizadas por área específica, volume do poro, grau de inchamento, microscopia ótica, espectrometria de infravermelho por transformada de Fourier (FTIR), análise elementar, termogravimetria, microscopia eletrônica de varredura e determinação do iodo fixado por iodometria. A avaliação da atividade biocida foi realizada através do método da contagem em placas, utilizando-se uma cepa de Escherichia coli ATCC11775 em concentrações de 103 a 107 células/mL. Todas as resinas impregnadas mostraram atividade bactericida significante devido à presença de iodo correlacionada às características da resina, tais como: grupos funcionais, tamanho e formato dos poros. Para efeito de comparação, foram realizados ensaios bactericidas com as resinas de partida para comprovação ou não da ação bactericida ser atribuída somente ao iodo

氧碘激光器相位延迟片的制备与性能研究

多层介质反射镜在非正入射的时候，两个不同的偏振态之间会产生不同的相移。利用矩阵法，根据菲涅耳公式和电磁场边界条件，推导出p，s波的相移。通过优化设计．入射角为54°，在1285～1345nm之间p，s波获得了270°±1°的相移，同时也使反射率在99．5％以上。用离子束溅射技术制备相位延迟膜，用分光光度计测试了光谱特性和用椭偏仪测试了相位特性，在相应波段获得了262．4°±1．8°的相移，同时也使反射率在99．6％以上。误差的主要来源是离子源工作特性会产生不均匀的过渡层和最外层会吸收一些水气、灰尘等也产生

The role of small indigenous fish species in food and nutrition security in Bangladesh

In Bangladesh, only 6% of the daily food intake is animal food of which fish accounts for 50%. Rice is the mainstay, making up 60% of the daily food intake. However, many nutrients such as vitamins A and C, iron, calcium, zinc and iodine are not found in rice and have to be obtained from other sources. Small indigenous fish are a vital contribution to the diet of the rural poor in Bangladesh, where more than 30,000 children go blind every year from vitamin A deficiency and 70% of women and children are iron-deficient. Small fish, which are less than 10 cm in length and usually eaten whole with the organs and bones, contain large amount of calcium and possibly iron and zinc. The largest fish promoted in aquaculture do not contribute significantly to calcium intake. Some species also contain large amount of vitamin A. Much of the small indigenous fish (SIS) of Bangladesh are caught in floodplains and natural waterbodies. Small fish are eaten frequently in small amounts and are more equally distributed among family members than big fish of which men get the larger share. Unfortunately, overfishing and the deterioration of natural habitats have resulted in a decline in SIS. When measures are taken to improve food and nutrition security, there should be a focus on production of small fish so that greater quantities are accessible for consumption by the rural poor.

Lipid distribution in body and skin of four species of marine fish

The paper presents results of a study on the analytical characteristics of lipids from the skin and muscle of four important species of Gujarat coast fishes. Changes in characteristics like saponification value, iodine value and unsaponifiable matter of these lipids during different months of the year are also reported.

Influence of muscle fats on the quality of intermediate moisture fish

Chrysicthys nigrodigitatus with 12.95% fat having an iodine value of 74.8 and a saponification number of 198.48 and Citharinus citherus containing only 3.25% fat with iodine value of 67.8 and a saponification number of 145.86 were studied as examples of fatty and lean fishes respectively. The intermediate moisture (IM) products of both fish types compared with normal cooked samples, were evaluated as of acceptable colour, odour, texure and juiciness but of inferior taste due to the glycerol impact. However, during storage at 30°C the IM products became increasingly less acceptable with the deterioration being greater in the fatty fish than in the lean fish, although the fatty IM fish was superior to the IM lean fish with regard to water retention and juiciness. Overall quality differences were most apparent in colour and odour with the fatty IM fish being worse. The fatty fish had also greater evolution of TEA-reactive carbonyl breakdown products of lipid oxidation which were subsequently used up in non-enzymic browning producing the correspondingly darker fish colour and greater off odour.

Structural tunability and switchable exciton emission in inorganic-organic hybrids with mixed halides

Room-temperature tunable excitonic photoluminescence is demonstrated in alloy-tuned layered Inorganic-Organic (IO) hybrids, (C12H 25NH3)2PbI4(1-y)Br4y (y = 0 to 1). These perovskite IO hybrids adopt structures with alternating stacks of low-dimensional inorganic and organic layers, considered to be naturally self-assembled multiple quantum wells. These systems resemble stacked monolayer 2D semiconductors since no interlayer coupling exists. Thin films of IO hybrids exhibit sharp and strong photoluminescence (PL) at room-temperature due to stable excitons formed within the low-dimensional inorganic layers. Systematic variation in the observed exciton PL from 510 nm to 350 nm as the alloy composition is changed, is attributed to the structural readjustment of crystal packing upon increase of the Br content in the Pb-I inorganic network. The energy separation between exciton absorption and PL is attributed to the modified exciton density of states and diffusion of excitons from relatively higher energy states corresponding to bromine rich sites towards the lower energy iodine sites. Apart from compositional fluctuations, these excitons show remarkable reversible flips at temperature-induced phase transitions. All the results are successfully correlated with thermal and structural studies. Such structural engineering flexibility in these hybrids allows selective tuning of desirable exciton properties within suitable operating temperature ranges. Such wide-range PL tunability and reversible exciton switching in these novel IO hybrids paves the way to potential applications in new generation of optoelectronic devices. © 2013 AIP Publishing LLC.

主流无载气N_2-氧碘化学激光配气方式的数值优化

针对主流无载气、副流以氮气为载气的氧碘化学激光(COIL), 应用求解3维多组分化学反应流方程的数值方法, 对流场和物理化学的耦合过程进行细致研究, 对副流载气变化带来的问题及性能提升的手段、特别是合理的配气方式进行深入分析. 结果表明:传统的在亚声速段进行喷流的配气方式不适用于主流无载气N_2-COIL系统, 必须采用超声速段射流方式; 合理的流量配比条件下, 超声速段射流方式COIL光腔位置处增益可达1.5% cm~(-1); N_2-COIL流场边界层厚度明显减小, 拓宽了增益的有效分布区域

Study on conical columns with different conical angles for semi-preparative liquid chromatography

The dynamic flow profiles and separation performances in conically shaped preparative liquid chromatographic columns (inlet i.d. larger than outlet i.d.) with three different angles (7, 10 and 15degrees) were studied and compared with cylindrical column of the same length and internal volume. The shapes of dynamic flow profiles were studied by on-column visualization method. The transparent chromatographic columns made of polymethyl methacrylate (PMMA), packed with C-18 bonded silica, were immerged into a cubic pool filled with glycerol to eliminate the cylindrical and conical lens effect. The flow profiles of colored iodine solution in the columns were observed clearly using cyclohexane as mobile phase since the refractive indices of C-18, column wall and the mobile phase are very close. In the conical column of 15degrees (20-7 mm i.d.) the mobile phase in the central region migrated slower than in wall region as it moved toward the column outlet, while in the conical column of 7degrees (17-11 mm i.d.) the mobile phase in the central region migrated faster than in wall region just like in cylindrical column. We found that a plug-like flow profile was generated in the conical column of 10degrees (18-9 mm i.d.) during the whole migration process. A carmine and brilliant blue mixture was used as a probe to test the separation ability of the columns. The resolutions of the two compounds on the conical column of 7, 10, 15degrees and on the cylindrical column were 0.6, 1.57, 1.29 and 0.8, respectively. (C) 2003 Elsevier B.V. All rights reserved.

Activated carbons chemically modified by concentrated H2SO4 for the adsorption of the pollutants from wastewater and the dibenzothiophene from fuel oils

The surface properties, porosities, and adsorption capacities of activated carbons (AC) are modified by the oxidation treatment using concentrated H2SO4 at temperatures 150-270 degreesC. The modified AC was characterized by N-2 adsorption, base titration, FTIR, and the adsorption of iodine, chlorophenol, methylene blue, and dibenzothiophene. The treatment of AC with concentrated H2SO4 at 250 degreesC greatly increases the mesoporous volume from 0.243 mL/g to 0.452 mL/g, specific surface areas from 393 m(2)/g to 745 m(2)/g, and acidic surface oxygen complexes from 0.071 meq/g to 1.986 meq/g as compared with the unmodified AC. The base titration results indicate that the amount of acidic surface oxygen groups on the modified AC increases with increasing the treatment temperatures and carboxyls and phenols are the most abundant carbon-oxygen functional groups. The carboxyl groups, COO- species, and hydroxyl groups are detected mainly for the sample treated at 250 degreesC. The mesoporous properties of the AC modified by concentrated H2SO4 were further tested by the adsorption of methylene blue and dibenzothiophene. The AC modified by concentrated H2SO4 at 250 degreesC has much higher adsorption capacities for large molecules (e.g., methylene blue and dibenzothiophene) than the unmodified AC but less adsorption capacities for small molecules (e.g., iodine). The adsorption results from aqueous solutions have been interpreted using Freundlich adsorption models.

A 2-kW COIL with a square pipe-array JSOG and nitrogen buffer gas

A 2-kW-class chemical oxygen-iodine laser (COIL) using nitrogen buffer gas has been developed and tested since industrial applications of COIL devices will require the use of nitrogen as the buffer gas. The laser, with a gain length of 11.7 cm, is energized by a square pipe-array jet-type singlet oxygen generator (SPJSOG) and employs a nozzle bank with a designed Mach number of 2.5. The SPJSOG has advantages over the traditional plate-type JSOG in that it has less requirements on basic hydrogen peroxide (BHP) pump, and more important, it has much better operational stability. The SPJSOG without a cold trap and a gas-liquid separator could provide reliable operations for a total gas flow rate up to 450 mmol/s and with a low liquid driving pressure of around 0.7 atm or even lower. The nozzle bank was specially designed for a COIL using nitrogen as the buffer gas. The cavity was designed for a Mach number of 2.5, in order to provide a gas speed and static temperature in the cavity similar to that for a traditional COIL with helium buffer gas and a Mach 2 nozzle. An output power of 2.6 kW was obtained for a chlorine flow rate of 140 mmol/s, corresponding to a chemical efficiency of 20.4%. When the chlorine flow rate was reduced to 115 mmol/s, a higher chemical efficiency of 22.7% was attained. Measurements showed that the SPJSOG during normal operation could provide a singlet oxygen yield Y greater than or equal to 55%, a chlorine utilization U greater than or equal to 85%, and a relative water vapor concentration w = [H2O]/([O-2] + [Cl-2]) less than or equal to 0.1.

Application of a New Cyclic Guanidinium Ionic Liquid on Dye-Sensitized Solar Cells (DSCs)

A new cyclic guanidinium ionic liquid OGI (1,3-dimethyl-2-N ''-methyl-N ''-octylimidazoguanidinium iodide) has been used as a quasi-solid-state electrolyte for dye-sensitized solar cells (DSCs), and 6.38% conversion efficiency was achieved at AM 1.5 simulated sunlight (9.81 mW cm(-2)). Further gelation with SiO2 nanoparticles afforded the solid-state electrolyte, which presented overall conversion efficiency of 5.85%. The diffusion properties of these OGI-based electrolytes were investigated. In the meantime, the optimal structure and ion-pairing interaction in OGI have been proposed by density functional theoretical calculation (DFT) at the B3LYP/6-21G(d,p) level.

PIFA-Mediated Oxidative Cyclization of 1-Carbamoyl-1-oximylcycloalkanes: Synthesis of Spiro-Fused Pyrazolin-5-one N-Oxides

convenient and efficient synthesis of spiro-fused pyrazolin-5-one N-oxides starting from readily available 1-carbamoyl-1-oximylcycloalkanes is developed. This general protocol features a novel and facile way for access to the five-membered azaheterocycles by formation of a new N-N single bond. The key cyclization step utilizes the formation of an N-oxonitrenium intermediate, mediated by the hypervalent iodine reagent PIFA, and its subsequent intramolecular trapping by the amide moiety under rather mild experimental conditions.

Electrospinning of multicomponent ultrathin fibrous nonwovens for semi-occlusive wound dressings

This work describes the design and assembly of multifunctional and cost-efficient composite fiber nonwovens as semi-occlusive wound dressings using a simple electrospinning process to incorporate a variety Of functional components into an Ultrathin fiber. These components include non-hydrophilic poly(L-lactide) (PLLA) as fibrous backbone, hydrophilic poly(vinyl pyrrolidone)iodine (PVP-I), TiO2 nanoparticles, zinc chloride as antimicrobial, odor-controlling, and antiphlogistic agents, respectively. The process of synthesis starts with a multicomponent solution Of PLLA, PVP, TiO2 nanoparticles plus zinc chloride, in which TiO2 nanoparticles are synthesized by in situ hydrolysis of TiO2 precursors in a PVP Solution for the sake of obtaining the particle-uniformly dispersive solution. Subsequent electrospinning generates the corresponding composite fibers. A further iodine vapor treatment to the composite fibers combines iodine with PVP to produce the PVP-I complexes. Experiments indicate that the assembled composite fibers (300-400 nm) possess the ointment-releasing characteristic and the phase-separate, core-sheath structures in which PVP-I residing in fiber Surface layer becomes the sheath, and PLLA distributing inside the fiber acts as the core.

Efficient synthesis of highly substituted pyrrolin-4-ones via PIFA-mediated cyclization reactions of enaminones

A convenient and efficient synthesis of highly substituted pyrrolin-4-ones is developed via the PIFA-mediated cyclization reactions of readily available enaminones, and a mechanism involving sequential cleavage of N-C bond, formation of new N-C bond, intramolecular addition reaction, and benzilic acid type rearrangement is proposed.