Emergence of corn according to the sowing depth of the seed and loads on press wheels

The seeding process was the operation that suffered the most changes in no-tillage system due the cover crop soil and new particle soil arrangement. The objective of this study was to verify the effects of loads applied to the wheels and adjustments of sowing depth on seedling emergence of corn in no-tillage system. The experimental design was completely randomized with a factorial arrangement 5x4, with five loads applied to the wheels and four theoretical sowing depth adjustments. The real sowing depth increased in the lower theoretical depth and decreased in the higher theoretical depth, due to the compaction loads. Regarding the time of emergence, loads applied had not influence at the greater depths. Emergence time decreased with the load increase in the lower depths. Thus, the adjustment of the compactor wheels can influence in the corn seeding process.

Static tests of constructive tires using hydraulic press on the soil

ABSTRACT The power consumption and load capacity of agricultural machines have grown and the effects of pressure on the soil by tires have been still little investigated. In concern with sustainable development, the relationship machine-tire-soil must be in balance to give more consistency on the best use of tires for a given load. This study aimed to evaluate four tires of two constructive types, the bias belted tires and radial tires, both with respective rim diameters of 22.5 and 26.5 inches with variables measuring the footprint, elastic deformation, sinkage and resistance to penetration. A hydraulic press with an attachment shaft for tire mounting and a box of soil in which the tire has been imposed on a load of 53.00 kN using nominal pressures recommended by the tire manufacturer. The radial construction tire with rim diameter of 26.5 inches obtained less sinkage and resistance to penetration; however, greater elastic deformation and footprint compared to other tires. The bias-belted tire with 22.5-inch rim presented the highest resistance to penetration and the lowest elastic deformation.

Effectiveness of an illustrated home exercise guide on promoting urinary continence during pregnancy: a pragmatic randomized clinical trial

OBJETIVO: Avaliar a efetividade de um manual de orientação de exercícios domiciliares (MOED) para o assoalho pélvico (AP) na promoção da continência urinária em gestantes primigestas.MÉTODOS: Ensaio clínico com 87 participantes, avaliadas 6 vezes durante a gestação e divididas aleatoriamente em 3 grupos: Grupo supervisionado (Gsup), que praticou exercícios com supervisão; Grupo observado (Gobs), que praticou exercícios sem supervisão, e Grupo referência (Gref), que não praticou exercícios. Incontinência urinária (IU) (desfecho primário) e força muscular perineal (FMP) (desfecho secundário) foram avaliadas por intermédio de diário de perdas urinárias e perineometria, respectivamente. Foram utilizados o teste de Kruskal-Wallis, seguido do teste post hoc de Dunn, para variáveis contínuas, e o teste do χ2 e testes Z, com correções de Bonferroni, para proporções, com nível de significância de 5%.RESULTADOS: O Gsup e o Gobs apresentaram 6,9% de gestantes incontinentes, enquanto o Gref apresentou 96,6% de incontinentes. Quanto à FMP, o Gsup e o Gobs apresentaram valores médios de contração de 10 e 8,9 cmH2O, respectivamente, enquanto o Gref apresentou valor de 4,7 cmH2O. Ambos os resultados significantes.CONCLUSÃO: A utilização de um MOED é eficaz na promoção da continência urinária e no aumento da FMP em gestantes primigestas, independentemente de supervisão permanente.

Communicative Purposes of Press Releases Announcing Reduction in Workforce

Tämä tutkielma käsittelee kaupallisten yhtiöiden julkaisemia lehdistötiedotteita, joissa ilmoitetaan henkilöstövähennyksistä. Erityisenä tutkimuskohteena ovat lehdistötiedotteiden informatiiviset ja promotionaaliset päämäärät ja tarkoitukset sekä näiden päämäärien ja tarkoitusten ilmentyminen tekstin retorisen rakenteen, valittujen retoristen strategioiden sekä leksikaalisten ja kieliopillisten valintojen kautta. Tutkimuksen aineisto koostuu 50 englanninkielisestä lehdistötiedotteesta, jotka sisältävät ilmoituksen henkilöstövähennyksistä. Lehdistötiedotteet kerättiin yritysten verkkosivuilta. Tutkimuksen teoreettisena viitekehityksenä toimivat soveltavan kielentutkimuksen alalla erityisesti ammattikielentutkimuksessa (ESP, English for Specific Purposes) laajalti käytetty Swalesin (1990) tekstilajia (genre) koskeva määritelmää ja Bhatian (1993) kehittämä geneerisen analyysin malli. Ennen aineiston kielitieteellistä analysointia tutkimuksessa perehdyttiin Bhatian (1993) mallin mukaisesti lehdistötiedotteiden historiaan, kohdeyleisöihin, diskurssiyhteisöön ja sen tuottamiin muihin tekstilajeihin, aikaisempiin lehdistotiedotteita käsitteleviin kielitieteellisiin tutkimuksiin sekä erityisesti yritysten henkilövähennyksiin liittyvään tilannekontekstiin. Kielitieteellisessä analyysissä tutkittavista teksteistä tunnistettiin kahdeksan retorista vaihetta (move), jotka olivat tyypillisiä tutkituille teksteille. Kunkin retorisen vaiheen yksittäiset ilmentymät koottiin yhteen erillisiksi aineistoiksi, joista pyrittiin tunnistamaan kullekin vaiheelle tyypilliset retoriset strategiat sekä toistuvat leksikaaliset ja kieliopilliset valinnat. Tutkimuksessa todettiin, että vaikka tutkittujen lehdistötiedotteiden pääasiallinen tarkoitus oli yhtiön toiminnasta tiedottaminen, niillä oli myös promotionaalinen päämäärä, joka ilmeni mm. pyrkimyksenä välittää yhtiöstä mahdollisimman positiivinen kuva eri kohdeyleisöille, erityisesti sijoittajille. Tämän positiivisen kuvan välittämiseen käytettyjä keinoja olivat mm. odotettavissa olevien saavutusten korostaminen, ulkoisten tekijöiden nimeäminen nykyisen tilanteen aiheuttajaksi, passiivin käyttö sekä erilaiset yrityksen julkisen kuvan säilyttämiseen pyrkivät (face-saving) strategiat.

Quality enhancement in teacher education : Tanzanian teacher educators’ conceptions and experiences

The overall aim of this study was to investigate and examine teacher educators’ conceptions and experiences of quality of teacher education. The research interest therefore was two-fold: a) to deepen understanding of the concept quality and b) scrutinize experiences of teacher educators of quality enhancement. To achieve this ambition the study was conducted in the context of a newly established university college-based teacher education in Tanzania. Two research questions guided the study. The first focused on investigating how teacher educators conceived quality in the domain of teacher education and the second intended to explore teacher educators’ experiences of quality enhancement. The theoretical framework of the study centered on the concepts of teacher education, quality, and criteria for quality enhancement. Phenomenographic and phenomenological approaches under the main umbrella of qualitative research design were selected. Twenty five teacher educators participated in the study. Interviews were used for the collection of the data. The results of the first research question, in brief, indicate that teacher educators’ conceptions of quality are expressed in two main categories, namely, outstanding academic scholarship and adequate professional scholarship. Quality as outstanding academic scholarship was illustrated by two subcategories: excellence and positive transformation. While the former was composed of two aspects, the latter was demonstrated by three aspects. Quality as adequate professional scholarship was described in three sub-categories. The first was improved teaching competency, consisting of two aspects. The second was conscious research orientation, which is displayed by three aspects, and the last was enhancing the ability to reflect, represented by two aspects. The results of the second research question, which focused on exploring teacher educators’ experience of quality enhancement, were classified into two main categories of description: insufficient programs of teacher education and unsatisfactory professional development of teacher educators. From the two categories, the strengths, weaknesses, opportunities and challenges related to programs of educating teachers, particularly curriculum development and implementation, and the professional development of educators, were exposed. Since the ambition of conducting the study was to deepen the understanding by producing insight that would act as a platform for appraising and enhancing the quality of teacher education, the results hopefully can be used for the development of the quality of teacher education in Tanzania.

The revival of international solidarity : the Internationale Arbeiterhilfe, Willi Münzenberg and the Comintern in Weimar Germany, 1921-1933

The aim of the study is to write the first comprehensive history of the Internationale Arbeiterhilfe (International Workers’ Relief) and its message of international solidarity during the Weimar Republic, 1921–1933. The Arbeiterhilfe was the Communist International’s (Comintern) primary international solidarity organisation of the time. The work is identified as a contribution to the transnational history of the interwar period as its main focus is not on governmental politics or intra-state relations, but is focused on the transnational world of an international organisation. The history of the Arbeiterhilfe provides the main springboard from which to write a contextually-based analysis of international solidarity during the Weimar Republic. The study highlights for the first time the importance of the German communist Willi Münzenberg (1889–1940), as the leader of the Arbeiterhilfe, in the history of international solidarity. The main question of this study is how an explicit use of language coupled with the visualisation and practices of solidarity were created through the Arbeiterhilfe. How was solidarity actually envisaged, organised and brought to life by the Arbeiterhilfe in Weimar Germany? How did its expressions of solidarity change over time? Throughout the thesis, the changing and complex character of solidarity is analysed. How was the Arbeiterhilfe’s message of solidarity created and changed in relation to the Comintern and the Soviet Union’s policies? How did the Arbeiterhilfe create a new culture of international solidarity thought film, cinema, illustrated newspapers and the organising of mass spectacles of international solidarity? The Arbeiterhilfe had its international headquarters in Berlin which functioned as the base, one could argue, for some of the inter-war period’s most spectacular solidarity campaigns. The Arbeiterhilfe constitutes a significant case study of an early international organisation as it was one of the first international organisations for global (albeit not universal) international solidarity which had unparalleled prospects to develop new transnational identifications and social ties. It could consequently be suggested that the Arbeiterhilfe in several ways could be perceived as a predecessor to several post-1945 transnational solidarity organisations and International Non-Governmental Organisations (INGOs).

Possibility of press forming wood films into primary packaging

In recent times the packaging industry is finding means to maximize profit. Wood used to be the most advantageous and everyday material for packaging, worktables, counters, constructions, interiors, tools and as materials and utensils in the food companies in the world. The use of wood has declined vigorously, and other materials like plastic, ceramic, stainless steel, concrete, and aluminum have taken its place. One way that the industry could reduce its cost is by finding possibilities of using wood for primary packaging after which it can be safely recycled or burned as a carbon source for energy. Therefore, the main objective of this thesis is to investigate the possibility of press-forming a wood film into primary packaging. In order to achieve the stated objectives, discussion on major characteristics of wood in terms of structure, types and application were studied. Two different wood species, pine and birch were used for the experimental work. These were provided by a local carpentry workshop in Lappeenranta and a workshop in Ruokolahti supervised by Professor Timo Kärki. Laboratory tests were carried out at Lappeenranta University of Technology FMS workshop on Stenhøj EPS40 M hydraulic C-frame press coupled with National Instruments VI Logger and on the Adjustable packaging line machine at LUT Packaging laboratory. The tests succeeded better on the LUT packaging line than on the Stenhoj equipment due to the integrated heating system in the machine. However, there is much work to be done before the quality of a tray produced from the wood film is comparable to that of the wood plastic composite tray.

Representations of cultural encounters in the global business press – The importance of cross-cultural competence

This qualitative study has started from the interest to examine how the reality of crosscultural encounters is presented in the global business press. The research paper emphasizes different ways to classify culture and cross-cultural competency, both from the point of view of individuals and organizations. The analysis consists of public discourses, where cross-cultural realities are created through different persons, stories and contexts For data collection, a comprehensive database search was performed and 10 articles from the widely known worldwide business magazine The Financial Times were chosen as the data for the study paper. For the functions of addressing the research study questions, Thematic Content Analysis (TCA) and also Discourse Analysis (DA) are utilized, added with the continuous comparison method of grounded theory in the formation of the data.The academic references consist of literary works and articles presenting relevant concepts, creating a cross-cultural framework, and it is designed to assist the reader in the navigation through the topics of culture and cross-cultural competency. The repertoires were formed from the data and following, the first repertoire is contrast difference between home and target culture that the individual was able to discern. As a consequence of the first repertoire, the companies then offer cultural training to their employees to prepare them to situations of increasing levels of cultural variation. The third repertoire is increased awareness of other cultures, which is conveyed as a result of cultural training and contextual work experience. The fourth repertoire is globalization as an international business environment, where the people in the articles perform their job functions. It is stated in the conclusions that the representations emphasize Western values and personal traits in leadership.

Press forming of paperboard – advancement of converting tools and process control

Press forming is nowadays one of the most common industrial methods in use for producing deeper trays from paperboard. Demands for material properties like recyclability and sustainability have increased also in the packaging industry, but there are still limitations related to the formability of paperboard. A majority of recent studies have focused on material development, but the potential of the package manufacturing process can also be improved by the development of tooling and process control. In this study, advanced converting tools (die cutting tools and the press forming mould) are created for production scale paperboard tray manufacturing. Also monitoring methods that enable the production of paperboard trays with enhanced quality, and can be utilized in process control are developed. The principles for tray blank preparation, including creasing pattern and die cutting tool design are introduced. The mould heating arrangement and determination of mould clearance are investigated to improve the quality of the press formed trays. The effect of the spring back of the tray walls on the tray dimensions can be managed by adjusting the heat-related process parameters and estimating it at the mould design stage. This enables production speed optimization as the process parameters can be adjusted more freely. Real-time monitoring of pressing force by using multiple force sensors embedded in the mould structure can be utilized in the evaluation of material characteristics on a modified production machinery. Comprehensive process control can be achieved with a combination of measurement of the outer dimensions of the trays and pressing force monitoring. The control method enables detection of defects and tracking changes in the material properties. The optimized converting tools provide a basis for effective operation of the control system.

Factors Affecting Runnability of Press Forming Equipment

The growth of the food packaging industry has raised more interest in bio-based fibre packing. The use of petroleum based packages is unfriendly to the environment while bio-based is a sustainable option for food packing. In this Master Thesis the aim was to discover how the press forming machineries runnability is affected by parameters of the press and how it also affects formability of paperboard trays. Familiarisation of the working operation parameters was done with the KAMA ST 75 flat-bed die cutting machine and the VP3-70 mould press. Some small test runs of moulding trays where done to get acquainted to the adjustment parameters of the machines. Literature study was done on how paperboards physical properties react to the forces applied during press forming. The study of what kind of defects to the paperboard tray might occur during forming process and the causes for these defects. Also how the parameters of the press forming machine affects formability of the tray. Maintenance procedures was done to the press forming machine to enhance the reliably of production process. Tool alignment measurement was done to determine proper alignment. Laboratory test of the physical properties of the test material was done to find any connection to how the test material performs in press forming. An evaluation criterion was made to evaluate the dimensions and defects of the tray. From the test result a conclusion can be drawn on how the parameters of the press forming process affect the paperboard material. Based on the results the adjustment the parameters of moulding machines to the mechanical properties of paperboard it is possible to produce high quality fibre passed trays for the food packaging industry.

Leak-proof Heat Sealing of Press-Formed Paperboard Trays

Three-dimensional (3D) forming of paperboard and heat sealing of lidding films to trays manufactured by the press forming process are investigated in this thesis. The aim of the work was to investigate and recognize the factors affecting the quality of heat sealing and the leak resistance (tightness) of press-formed, polymer-coated paperboard trays heatsealed with a multi-layer polymer based lidding film. One target was to achieve a solution that can be used in food packaging using modified atmosphere packaging (MAP). The main challenge in acquiring adequate tightness properties for the use of MAP is creases in the sealing area of the paperboard trays which can act as capillary tubes and prevent leak-proof sealing. Several experiments were made to investigate the effect of different factors and process parameters in the forming and sealing processes. Also different methods of analysis, such as microscopic analysis and 3D-profilometry were used to investigate the structure of the creases in the sealing area, and to analyse the surface characteristics of the tray flange of the formed trays to define quality that can be sealed with satisfactory tightness for the use of MAP. The main factors and parameters that had an effect on the result of leak-proof sealing and must be adjusted accordingly were the tray geometry and dimensions, blank holding force in press forming, surface roughness of the sealing area, the geometry and depth of the creases, and the sealing pressure. The results show that the quality of press-formed, polymer-coated paperboard trays and multi-layer polymer lidding films can be satisfactory for the use of modified atmosphere packaging in food solutions. Suitable tools, materials, and process parameters have to be selected and used during the tray manufacturing process and lid sealing process, however. Utilizing these solutions and results makes it possible for a package that is made mostly from renewable and recyclable sources to be a considerable alternative for packages made completely from oil based polymers, and to achieve a greater market share for fibre-based solutions in food packaging using MAP.

Nylon zipper and permanent press fabrics

An ad extolling the benefits of the Lightning Zephyr nylon zipper. This ad was directed towards the garment industry.

Press Pass

He was with the Brock University Student News Paper, "The Badger"

Brock Press Newsroom

The Brock Press newsroom located in the Glenridge Campus.