电子束蒸发镀膜速率控制

介绍了电子束蒸发镀膜速率控制的基本原理和方法,选取实际生产中大量使用且蒸发特性较难控制的SiO_2和HfO_2,对两者的电子束蒸发速率控制分别进行了实验研究。采用比例积分微分(PID)闭环反馈控制,通过Ziegler-Nichols工程经验公式进行原始参量整定,并在实验的基础上对控制器的原始参量进行调整以及对积分作用和微分作用进行分区处理,速率控制的实验结果表明,采用该参量整定方法并结合工艺流程的改进,能获得良好的速率控制。针对速率控制中存在的难点问题进行了分析,并提出改进措施:将速率控制和电子枪扫描控制相结合能进一步改善速率控制。

Skimmers: Their Development and Use in Coastal Louisiana

The origin, development, and utilization of the skimmer net is reviewed along with other historical shrimp gears used in coastal Louisiana. The skimmer was developed to catch white shrimp, Penaeus setiferus, observed jumping over the cork line (headrope) of trawls being worked in shallow waters. A description of the gear is presented including basic components and various frame designs used by fishermen during its development. The advantages of skimmers over bottom trawls include: multiple use as both trawl and butterfly net (wing net), ease of deployment, increased maneuverability, reduction and greater survivability of bycatch, and ability to cover more area due to increased speed and continuous fishing capability. Disadvantages may include compromising vessel stability when stored upright on the deck, possible damage to water bottoms when improperly rigged, and limitation to a 12-foot (3.6 m) maximum depth due to size restrictions. The growing popularity of the skimmer net is evident by its introduction into North Carolina and inquiries from other southeastern Atlantic and Gulf coast states.

Corra que a polícia vem aí!: a (des)construção da imagem da Polícia Militar em notícia jornalística

Este trabalho se propõe a analisar, qualitativamente, as escolhas léxico-gramaticais, em uma perspectiva semântico-discursiva, utilizadas pela imprensa escrita, a fim de identificar como o sujeito social Polícia Militar é apresentado à sociedade. Objetiva-se mostrar que, mesmo em um discurso jornalístico de cunho informativo, algumas marcas (extra)linguísticas determinam uma orientação argumentativa adotada (in)conscientemente pelo seu produtor. Para esse estudo, a linha teórica predominantemente adotada foi a Análise Semiolinguística do Discurso, a qual tem como referência as teorias propostas, sobretudo, por Patrick Charaudeau. Foram selecionadas 15 (quinze) matérias de cunho informativo veiculadas nos jornais Folha de São Paulo e O Globo, nos dias 14 e 20 de junho de 2013, referentes às principais manifestações populares ocorridas nas cidades de São Paulo e Rio de Janeiro. As conclusões apontam para o papel da imprensa na desconstrução da imagem da polícia, procurando construir, na sociedade civil, um senso comum desfavorável à ação desses militares

Avaliação volumétrica e funcional do músculo glúteo máximo submetido a gluteoplastia de aumento com implantes de silicone

A operação para aumento de glúteos com implantes teve início no fim da década de 1960, entretanto a técnica intramuscular, considerada padrão atualmente, foi descrita cerca de 30 anos depois. Cirurgiões e pacientes apresentam crescente interesse na realização do aumento de glúteos haja vista que sua frequência apresenta aumento nos últimos anos. A utilização de implantes intramusculares que superam o volume do músculo em mais de cinquenta por cento configura uma situação nova que deve ser estudada. O tecido muscular estriado esquelético apresenta grande suscetibilidade para atrofia secundariamente à compressão, e sendo o glúteo máximo um músculo importante na manutenção da postura ereta, deambulação, corrida e salto, é necessário pesquisar possíveis alterações musculares decorrentes da operação. O objetivo deste estudo é avaliar o volume e força do músculo glúteo máximo ao longo de 12 meses após a introdução de implantes intramusculares, o posicionamento destes implantes no interior da musculatura e mudanças antropométricas obtidas com a operação. Foram selecionadas 48 mulheres, 24 candidatas a gluteoplastia de aumento com implantes compuseram o grupo de estudo e 24 candidatas a mamoplastia de aumento compuseram o grupo controle de acordo com os critérios de inclusão e exclusão. As pacientes foram avaliadas em quatro momentos diferentes: pré-operatório e após três, seis e 12 meses da operação. Em todas as etapas foi realizada avaliação clínica nutricional, tomografia computadorizada com reconstrução 3D e teste isocinético. Todas as pacientes permaneceram afastadas de atividades físicas durante três meses após a operação. Foram utilizados implantes glúteos em gel coesivo de base oval e superfície lisa com volumes de 350 cm3 e 400 cm3. O nível de significância estatística foi mantido em 5%. As pacientes candidatas a gluteoplastia apresentaram valores da relação entre as medidas da cintura e do quadril maiores que aquelas do grupo controle. A operação de aumento glúteo com implantes demonstrou eficácia na melhora desta relação. Os implantes apresentaram posição obliqua com inclinação semelhante à das fibras musculares após três meses da operação, independente da posição em que foram inseridos. As pacientes do grupo de estudo apresentaram atrofia muscular após 12 meses em 6,14% à esquerda e 6,43% à direita, as pacientes do grupo controle não apresentaram atrofia. A força muscular apresentou redução do valor de torque máximo durante a flexão do quadril a 30 /s em ambos os grupos e aumento do torque máximo durante a adução a 60 /s apenas no grupo de estudo. Concluímos que a introdução de implante de silicone no interior do músculo glúteo máximo causa atrofia muscular após 12 meses. As variações na força deste músculo nesse período não podem ser atribuídas primariamente à operação ou à presença dos implantes em seu interior. Os implantes permaneceram em posição obliqua. O aumento de glúteos com implantes gera mudanças antropométricas nas mulheres submetidas a esta operação.

Characterisation of impact response of metallic foam/ceramic laminates

The impact response of laminated composites consisting of alternate layers of AI ahoy foam and Al2O3 was studied experimentally in low and intermediate velocity regimes. Low velocity impacts (1.2-2.8 m s(-1)) were conducted using an instrumented falling weight apparatus and were compared with static indentation tests (0.2 x 10(-4) m s(-1)). Intermediate velocity impacts were carried out by means of both Hopkinson bar (60 m s(-1)) and gas gun (200 m s(-1)) tests, Post-impact damage was assessed using X-ray radiography and microscopy, It was found that there is good correlation between low velocity impact and quasi-static responses. In both cases, penetration of the layered targets resulted in the formation of a distinctive plug. Increasing impact velocity (intermediate velocity range) snitched the penetration mode from plugging to fragmentation, giving rise to an increase in the absorbed energy. In this range, impacts led to localisation of damage in the region under the projectile, Furthermore, a comparison has been made between the penetration response of foam laminates and dense metal laminates of equivalent areal density. Preliminary results suggest that the dense metal laminates are superseded by the foam laminates on an energy absorption basis.

Acute toxicity of chlorpyrifos, cadusafos and diazinon to three Indian major carps (Catla catla, Labeo rohita and Cirrhinus mrigala) fingerlings

Fingerlings of three Indian major carps, viz. Catla catla (Hamilton-Buchanon), Labeo rohita (Hamilton-Buchanon) and Cirrhinus mrigala (Hamilton-Buchanon), were exposed to different concentrations of chlorpyrifos (lorsban 10 G), cadusafos (rugby 10 G) and diazinon (basudin 10 G) for a period of 96h with a view to determine the median lethal concentrations (LC sub50) values for each of chemicals. Of the tested concentrations, chlorpyrifos at a dose of 6.65 ppm, cadusafos at 2.0 ppm and diazinon at a dose of 8.40 ppm or above induced 100% mortalities within 96h of exposure. The 96h LC sub50 values of chlorpyrefos, cadusafos and diazinon were 1.66, 0.72 and 2.10 ppm for C. catla, 2.35, 0.72 and 2.97 for L. rohita and 2.35, 0.72 and 2.10 ppm for C. mrigala, respectively. Pesticide induced behavioral abnormalities observed in the present study included erratic movements, rapid operculum activities, jumping of fish out of the test media, violent spasm and convulsion.

PATTERNS OF SPATIAL-DISPERSION, LOCOMOTION AND FORAGING BEHAVIOR IN 3 GROUPS OF THE YUNNAN SNUB-NOSED LANGUR (RHINOPITHECUS-BIETI)

Aspects of the behaviour of three groups of Yunnan snub-nosed langurs, Rhinopithecus bieti, were observed over the course of three field seasons from 1986 to 1988. The major findings of the study were: (1) The habitats of R. bieti were mainly at heights of 3,600-4,150 m above sea level. (2) Groups were very large, with group sizes ranging from more than 100 to 269 individuals. (3) Spatial dispersion densities ranged from about 27 to 106 m2/individual during sleeping and resting, to feeding dispersions as large as 5,000-15,000 m2. (4) The locomotor repertoire of R. bieti consisted largely of walking, jumping and climbing. On very rare occasions, semibrachiation was observed, but true brachiation was never observed. The locomotor repertoires of juveniles were more diverse than those of subadults or adults. (5) Communication consisted mainly of eye-to-eye contact accompanied by murmurs; while loud calls were heard only rarely. (6) Groups moved between sleeping and feeding sites in single file. It is concluded that R. bieti is a mainly terrestrial species.

Moderate speed impact damage to 2D-braided glass-carbon composites

Hybrid glass-carbon 2D braided composites with varying carbon contents are impacted using a gas gun by impactors of masses 12.5 and 44.5. g, at impact energies up to 50. J. The damage area detected by ultrasound C-scan is found to increase roughly linearly with impact energy, and is larger for the lighter impactor at the same impact energy. The area of whitening of the glass tows on the distal side corresponds with the measured C-scan damage area. X-ray imaging shows more intense damage, at the same impact energy, for a higher-mass impactor. Braids with more glass content have a modest increase in density, decrease in modulus, and reduction in the C-scan area and dent depth at the impact site, particularly at the higher impact energies. Impact damage is found to reduce significantly the compressive strength, giving up to a 26% reduction at the maximum impact energy. © 2012 Elsevier Ltd.

Linear multimodal actuation through discrete coupling

Due to technological limitations, robot actuators are often designed for specific tasks with narrow performance goals, whereas a wide range of behaviors is necessary for autonomous robots in uncertain complex environments. In an effort to increase the versatility of actuators, we introduce a new concept of multimodal actuation (MMA) that employs dynamic coupling in the form of clutches and brakes to change its mode of operation. The dynamic coupling allows motors and passive elements such as springs to be engaged and disengaged within a single actuator. We apply the concept to a linear series elastic actuator which uses friction brakes controlled online for the dynamic coupling. With this prototype, we are able to demonstrate several modes of operation including stiff position control, series elastic actuation as well as the possibility to store and release energy in a controlled manner for explosive tasks such as jumping. In this paper, we model the proposed concept of actuation and show a systematic performance analysis of the physical prototype that we developed in our laboratory. © 1996-2012 IEEE.

Analysis of equilateral triangle semiconductor microlasers with rough sidewalls

The mode frequencies and quality factors are calculated for the equilateral triangle semiconductor microlasers with sinusoidal and random Gaussian sidewalls. The results show that the modes can still have high Q-factors.

A semiconductor laser suitably fabricated by planar technology

The semiconductor microlasers with an equilateral triangle resonator which can be fabricated by dry etching technique from the laser wafer of the edge emitting laser, are analyzed by FDTD technique and rate equations. The results show that ETR microlaser is suitable to realize single mode operation. By connecting an output waveguide to one of the vertices of the ETR, we still can get the confined modes with high quality factors. The EM microlasers are potential light sources for photonic integrated circuits.

鞑靼荞麦（Fagopyrum tataricum Gaertn.）离体再生与遗传转化研究

鞑靼荞麦是我国特有的农业产品，具有抗寒耐旱特性和较高的营养保健功能。荞麦的开花习性及遗传特点导致其人工杂交授粉难以成功，这成为荞麦杂交育种难以获得突破的重要原因。因此利用转基因技术导入有益基因有可能成为荞麦遗传改良的新途径，而再生及转化体系的建立是开展转基因研究的基础。 本文研究了苗龄、外植体、几种激素配比对鞑靼荞麦（Fagopyrum tataricum Gaertn.）离体培养的影响，初步建立了鞑靼荞麦离体再生体系。结果表明，鞑靼荞麦离体再生的最佳取材时间为苗龄6-8d；诱导愈伤组织的最适培养基为MS＋2.0 mg/L 2,4-D＋1.5 mg/L 6-BA，子叶诱愈率达75％左右，下胚轴的可高达86.62％；愈伤组织分化的最适培养基为MS 0.1mg/L IAA＋2.0mg/L 6-BA＋1.0 mg/L KT＋0.5mg/L TDZ，下胚轴的分化率可达9.52%。下胚轴的诱愈率与分化率均高于子叶，更适于离体再生培养。培养基中加入AgNO3后，能有效降低褐化率。生根最适培养基为含有0.5mg/L NAA的1/2MS培养基，生根率在50％左右。TDZ在诱导鞑靼荞麦的愈伤组织分化出芽的过程中起到明显的促进作用，可提高分化率约20%。 在上述研究基础上，本文还对鞑靼荞麦的遗传转化体系进行了探索性研究。分别利用根癌农杆菌（Agrobacterium tumefaciens）介导法和微粒轰击法（基因枪法）对黑水苦荞下胚轴进行遗传转化。 在农杆菌介导的方法中，携带有质粒pCAMBIA2301的农杆菌菌株EHA105用于转化。载体质粒pCAMBIA2301包含有gus和npt-II 基因, 并受35s启动子驱动。研究结果表明，在侵染方式选择上，浸泡方式比吸打方式更有效，根癌农杆菌侵染的较适浓度为OD600＝0.5，共培养3天，恢复培养7天，能检测到gus基因的表达。 基因枪法使用质粒pBI121，同样包含有gus和npt-II基因, 并受CaMV35s 启动子驱动。轰击距离为9cm较合适，甘露醇前处理在本研究中未表现出明显优势。 两种转化方法比较，基因枪法比农杆菌介导法更快速有效。 本研究为进一步的遗传操作研究打下基础。 Tartary buckwheat (Fagopyrum tataricum Gaertn.), the traditional and unique agricultural product of China, is a kind of crop with strong drought and cold tolerance, abundant nutrition and high medical value. Artificial hybridization is hard in buckwheat because of its flowering habits and genetic characteristics, which leads to no breakthrough in tartary buckwheat breeding. However, biotechnological approaches, especially genetic transformation for the direct introduction of good genes into tartary buckwheat for quality improvement, hold great promise. In this study, we established tartary buckwheat regeneration system in vitro. It is the foundation for genetic manipulation of this crop. The effects of seedling age, hypocotyl and cotyledon as explants, and proportions of several growth regulators were tested in tissue culture of tartary buckwheat for establishing its in vitro regeneration system. The results showed that the best seedling age for callus induction was 6 to 8 days. On the MS medium containing 2.0mg/L 2, 4-D and 1.5mg/L 6-BA, the induction rate of callus from hypocotyls was up to 86.62%, while from cotyledons was about 75％. The suitable shooting medium was the MS medium+0.1mg/L IAA+2.0mg/L 6-BA+1.0 mg/L KT+0.5mg/L TDZ, and the shooting rate from hypocotyls was 9.52%. The callus induction and shooting rates were higher from hypocotyls than from cotyledons. Browning reduced when the medium mixed with AgNO3. Half strength MS supplemented with 0.5mg/L NAA was the best for rooting, the rate was around 50% after 30 days culture. TDZ can accelerate the shoot differentiation distinctively, and it could improve the shooting rate nearly 20%. On the base of above, the explorative research of the genetic transformation in tartary buckwheat was done. In the study, hypocotyls from Heishui tartary buckwheat were transformed by Agrobacterium-mediated method and microprojectile bombardment method (gene-gun), comparatively. In Agrobacterium-mediated method, a disarmed Agrobacterium tumefaciens strain EHA105 harboring plasmid pCAMBIA2301 was used. The vector pCAMBIA2301 contains gus and npt-II genes, driven by CaMV35s promoter. The results showed that the appropriate concentration of Agrobacterium tumefaciens for infecting was OD600＝0.5, and co-culture time was 3d. Seven days later after coculture, GUS expression could be tested. In particle bombardment transformation, plasmid pBI121 was used. pBI121 also contains gus and npt-II genes, driven by 35s promoter. Hypocotyls pretreated with mannitol, no effect was observed, and the suitable distance of bombardment is 9cm. Comparing with Agrobacterium-mediated method, gene-gun method is more convenient and effective. All above results could be a basic work for further study in tartary buckwheat transformation.

并行设备总线嵌入式控制系统设计

为了对物理实验装置的远程监控和访问,将采用32位内核芯片技术结合CPLD逻辑时序编程来设计3U VME设备总线系统。S3C4510B是三星公司针对网络应用而设计的CPU,本身带有100Mbps网络控制器,而由于Clinux系统拥有完善的TCP/IP协议,因此二者的结合为用户提供了强大的网络服务功能。该系统利用嵌入式网络和并行总线技术可稳定可靠地实现数据的快速获取与给定。

Development of external electron-beam enhancement of the Penning ionization gauge ion source

To study the injection of additional electrons from an external electron gun into the plasma of a Penning ionization gauge (PIG) ion source, a test bench for the external electron-beam enhancement of the PIG (E-PIG) ion source was set up. A source magnet assembly was built to satisfy the request for magnetic field configuration of the E-PIG ion source. Numerical calculations have been done to optimize the magnetic field configuration so as to fit the primary electrons to be fed into the PIG discharge chamber along the spreading magnetic field lines. Many possible methods for improving the performance and stability of the PIG ion source have been used in the E-PIG ion source, including the use of multicrystal LaB6 cathode and optimized axial magnetic field. This article presents a detailed design of the E-PIG ion source. Substantial enhancement of ion charge state is expected to be observed which demonstrates that the E-PIG is a viable alternative to other much more costly and difficult to operate devices for the production of intense ion beams of higher charge state.