Queens Bet Din Gittin / Rabbi Faber Records. 1947-1994 (bulk 1974-1992)

This is a collection of the records of Rabbi Salamon Faber, Chair of the Queens Bet Din or Rabbinic Court, concerning the gittin (plural of get, Jewish religious divorces) that the Queens Bet Din granted between 1947 and 1992. These records include Rabbi’s Faber’s personal notes about the gittin, correspondence with the husband and wife and with any other concerned parties, copies of civil and religious marriage and divorce documents, divorce contracts signed by the husband, and copies of conversion certificates.

Oral medication delivery in impaired swallowing: Thickening liquid medications for safe swallowing alters dissolution characteristics

Acetaminophen (paracetamol) is available in a wide range of oral formulations designed to meet the needs of the population across the age-spectrum, but for people with impaired swallowing, i.e. dysphagia, both solid and liquid medications can be difficult to swallow without modification. The effect of a commercial polysaccharide thickener, designed to be added to fluids to promote safe swallowing by dysphagic patients, on rheology and acetaminophen dissolution was tested using crushed immediate-release tablets in water, effervescent tablets in water, elixir and suspension. The inclusion of the thickener, comprised of xanthan gum and maltodextrin, had a considerable impact on dissolution; acetaminophen release from modified medications reached 12-50% in 30 minutes, which did not reflect the pharmacopeia specification for immediate release preparations. Flow curves reflect the high zero-shear viscosity and the apparent yield stress of the thickened products. The weak gel nature, in combination with high G’ values compared to G” (viscoelasticity) and high apparent yield stress, impact drug release. The restriction on drug release from these formulations is not influenced by the theoretical state of the drug (dissolved or dispersed), and the approach typically used in clinical practice (mixing crushed tablets into pre-prepared thickened fluid) cannot be improved by altering the order of incorporation or mixing method.

Veneer Grade Analysis of Early to Mid-rotation Plantation Eucalyptus Species in Australia

Processing Australian hardwood plantations into rotary veneer can produce more acceptable marketable product recoveries compared to traditional processing techniques (e.g. sawmilling). Veneers resulting from processing trials from six commercially important Australian hardwood species were dominated by D-grade veneer. Defects such as encased knots, gum pockets, gum veins, surface roughness, splits, bark pockets, and decay impacted the final assigned grade. Four grading scenarios were adopted. The first included a change to the grade limitations for gum pockets and gum veins, while the second investigated the potential impact of effective pruning on grade recovery. Although both scenarios individually had a positive impact on achieving higher face grade veneer qualities, the third and fourth scenarios, which combined both, had a substantial impact, with relative veneer values increasing up to 18.2% using conservative calculations (scenario three) or up to 22.6% (scenario four) where some of the upgraded veneers were further upgraded to A-grade, which attracts superior value. The total change in veneer value was found to depend on the average billet diameter unless defects other than those relating to the scenarios (gum or knots) restricted the benefit of pruning and gum upgrading. This was the case for species prone to high levels of growth stress and related defects.

An Investigation of Environmental Conditions Experienced During the Life of High Value Wood Components and Products

Australian forest industries have a long history of export trade of a wide range of products from woodchips(for paper manufacturing), sandalwood (essential oils, carving and incense) to high value musical instruments, flooring and outdoor furniture. For the high value group, fluctuating environmental conditions brought on by changes in mperature and relative humidity, can lead to performance problems due to consequential swelling, shrinkage and/or distortion of the wood elements. A survey determined the types of value-added products exported, including species and dimensions packaging used and export markets. Data loggers were installed with shipments to monitor temperature and relative humidity conditions. These data were converted to timber equilibrium moisture content values to provide an indication of the environment that the wood elements would be acclimatising to. The results of the initial survey indicated that primary high value wood export products included guitars, flooring, decking and outdoor furniture. The destination markets were mainly located in the northern hemisphere, particularly the United States of America, China, Hong Kong, Europe including the United Kingdom), Japan, Korea and the Middle East. Other regions importing Australian-made wooden articles were south-east Asia, New Zealand and South Africa. Different timber species have differing rates of swelling and shrinkage, so the types of timber were also recorded during the survey. Results from this work determined that the major species were ash-type eucalypts from south-eastern Australia (commonly referred to in the market as Tasmanian oak), jarrah from Western Australia, spotted gum, hoop pine, white cypress, black butt, brush box and Sydney blue gum from Queensland and New South Wales. The environmental conditions data indicated that microclimates in shipping containers can fluctuate extensively during shipping. Conditions at the time of manufacturing were usually between 10 and 12% equilibrium moisture content, however conditions during shipping could range from 5 (very dry) to 20% (very humid). The packaging systems incorporated were reported to be efficient at protecting the wooden articles from damage during transit. The research highlighted the potential risk for wood components to ‘move’ in response to periods of drier or more humid conditions than those at the time of manufacturing, and the importance of engineering a packaging system that can account for the environmental conditions experienced in shipping containers. Examples of potential dimensional changes in wooden components were calculated based on published unit shrinkage data for key species and the climatic data returned from the logging equipment. The information highlighted the importance of good design to account for possible timber movement during shipping. A timber movement calculator was developed to allow designers to input component species, dimensions, site of manufacture and destination, to see validate their product design. This calculator forms part of the free interactive website www.timbers.com.au.

Christian-Muslim Dialogue : Perspectives of Four Lebanese Thinkers

This study describes and analyses two Lebanese Muslims and two Lebanese Christians ideas about Christian-Muslim dialogue, its nature, aims, and methods and its different dimensions, which include doctrinal, ethical, and social dimensions. On the basis of the analysis, the four thinkers contributions for promoting constructive dialogue are evaluated. The persons studied are two religious authorities, the Shiite Great Ayatollah Muhammad Husayn Fadlallah (b. 1935) and the Eastern Orthodox Metropolitan of Mount Lebanon, Georges Khodr (b. 1923), and two academic scholars, Doctor Mahmoud Ayoub (b. 1935) and Doctor, Father Mouchir Aoun (b. 1964), from the Shiite and Greek Catholic communities, respectively. The method of the study is systematic analysis. The sources consist of the four thinkers writings on Christian-Muslim relations, the most of which have been published in Lebanon in the 1990s and 2000s in the Arabic language. In their general guidelines for Christian-Muslim dialogue, the four authors do not offer any novel or unusual insights. However, their dialogue visions are multi-faceted, motivating interreligious encounter both on religious and practical grounds and clarifying the theological grounds and socio-political conditions of this endeavour. The major challenge appears to be the tension between loyalty to one s own convictions and taking into account the particular self-understanding of the other. While this tension may be ultimately unsolvable, it is obvious that linking dialogue tightly to missionary motivations or certain theological agenda imposed on the others is not conducive for better mutual understanding. As for how diverse theologies of religions affect interreligious dialogue, narrow exclusivism hardly promotes mutual knowledge and appreciation, but also inclusive and pluralistic positions have their particular dilemmas. In the end, dialogue is possible from diverse positions on theology of religions. All the authors discuss the theological themes of divine revelation, concept of God, and human condition and ultimate destiny. The two religions particular views on these issues cannot be reconciled, but the authors offer diverse means to facilitate mutual understanding on them, such as increasing mutual knowledge, questioning certain traditional condemnations, showing theological parallels between the two religions, and transcending doctrinal disagreements by stressing common religious experience or ethical concerns. Among the theological themes, especially the concept of God seems to offer possibilities for better understanding than has traditionally been the case. Significantly, all the four authors maintain that Christians and Muslims share the faith in the one God, irrespective of their disagreements about the nature of his oneness. Basic ethical principles are not discussed as widely by the four authors as might be expected, which may reflect the shared cultural background and common ethical values of the Lebanese Muslims and Christians. On this level, Christians alienation from the Islamic law appears as the most significant challenge to mutual understanding, while neighbourly love and the golden rule of ethics offer a fruitful basis for further dialogue. As for the issue of political power-sharing in Lebanon, it is clear that the proposal of an Islamic state is problematic in a country with a sizable Christian minority and a heterogeneous Muslim population. Some form of democracy seems more viable for a multireligious country, but the question remains how to retain religion as a vital force in society, which is felt to be important by all the four Lebanese authors.

Surface chemical studies on pyrite in the presence of polysaccharide-based flotation depressants

The interaction of dextrin and guar gum with pyrite has been investigated through adsorption, flotation, and electrokinetic measurements. The adsorption densities of the polysaccharides onto pyrite reveal a region of higher adsorption density in the pH range 7.5-11, with a maximum around pH 10 for both polymers. The isotherms exhibit Langmuirian behavior. The adsorption density of guar gum onto pyrite is higher than that of dextrin. Electrokinetic measurements indicate a decrease in the electrophoretic mobility values in proportion to the concentration of the polymer added. Co-precipitation tests confirm polymer-ferric species interaction in the bulk solution, especially in the pH range 5.5-8.5. The pH range for higher adsorption, significant co-precipitation, and appreciable depression of pyrite encompass each other. XPS and FTIR spectroscopic studies provide evidence in support of chemical interaction between hydroxylated pyrite and the hydroxyl groups of the polymeric depressants. (C) 2000 Academic Press.

Scalable weak aligning medium for enantiodiscrimination of water soluble chiral molecules

The study reports the first indication of a lyotropic liquid crystalline phase of an aqueous solution of polysaccharide xanthan gum, as a physical parameter dependent scalable and reversible weak alignment medium, for enantiodiscrimination of water soluble chiral molecules.

Creation of a Huge Annotated Database for Tamil and Kannada OHR

This paper describes the efforts at MILE lab, IISc, to create a 100,000-word database each in Kannada and Tamil for the design and development of Online Handwritten Recognition. It has been collected from over 600 users in order to capture the variations in writing style. We describe features of the scripts and how the number of symbols were reduced to be able to effectively train the data for recognition. The list of words include all the characters, Kannada and Indo-Arabic numerals, punctuations and other symbols. A semi-automated tool for the annotation of data from stroke to word level is used. It segments each word into stroke groups and also acts as a validation mechanism for segmentation. The tool displays the stroke, stroke groups and aksharas of a word and hence can be used to study the various styles of writing, delayed strokes and for assigning quality tags to the words. The tool is currently being used for annotating Tamil and Kannada data. The output is stored in a standard XML format.

Online Handwritten Kannada Word Recognizer with Unrestricted Vocabulary

In this paper, we propose a novel heuristic approach to segment recognizable symbols from online Kannada word data and perform recognition of the entire word. Two different estimates of first derivative are extracted from the preprocessed stroke groups and used as features for classification. Estimate 2 proved better resulting in 88% accuracy, which is 3% more than that achieved with estimate 1. Classification is performed by statistical dynamic space warping (SDSW) classifier which uses X, Y co-ordinates and their first derivatives as features. Classifier is trained with data from 40 writers. 295 classes are handled covering Kannada aksharas, with Kannada numerals, Indo-Arabic numerals, punctuations and other special symbols like $ and #. Classification accuracies obtained are 88% at the akshara level and 80% at the word level, which shows the scope for further improvement in segmentation algorithm

Unrestricted Kannada online handwritten akshara recognition using SDTW

In this paper, we present an unrestricted Kannada online handwritten character recognizer which is viable for real time applications. It handles Kannada and Indo-Arabic numerals, punctuation marks and special symbols like $, &, # etc, apart from all the aksharas of the Kannada script. The dataset used has handwriting of 69 people from four different locations, making the recognition writer independent. It was found that for the DTW classifier, using smoothed first derivatives as features, enhanced the performance to 89% as compared to preprocessed co-ordinates which gave 85%, but was too inefficient in terms of time. To overcome this, we used Statistical Dynamic Time Warping (SDTW) and achieved 46 times faster classification with comparable accuracy i.e. 88%, making it fast enough for practical applications. The accuracies reported are raw symbol recognition results from the classifier. Thus, there is good scope of improvement in actual applications. Where domain constraints such as fixed vocabulary, language models and post processing can be employed. A working demo is also available on tablet PC for recognition of Kannada words.

Green synthesis of biopolymer-silver nanoparticle nanocomposite: An optical sensor for ammonia detection

Biopolymer used for the production of nanoparticles (NPs) has attracted increasing attention. In the presence article we use aqueous solution of polysaccharide Cyamopsis tetragonaloba commonly known as guar gum (GG), from plants. GG acts as reductive preparation of silver nanoparticles which are found to be <10. nm in size. The uniformity of the NPs size was measured by the SEM and TEM, while a face centered cubic structure of crystalline silver nanoparticles was characterized using powder X-ray diffraction technique. Aqueous ammonia sensing study of polymer/silver nanoparticles nanocomposite (GG/AgNPs NC) was performed by optical method based on surface plasmon resonance (SPR). The performances of optical sensor were investigated which provide the excellent result. The response time of 2-3. s and the detection limit of ammonia solution, 1. ppm were found at room temperature. Thus, in future this room temperature optical ammonia sensor can be used for clinical and medical diagnosis for detecting low ammonia level in biological fluids, such as plasma, sweat, saliva, cerebrospinal liquid or biological samples in general for various biomedical applications in human. © 2012 Elsevier B.V.

Green synthesis of polysaccharide/gold nanoparticle nanocomposite: An efficient ammonia sensor

A low cost eco-friendly method for the synthesis of gold nanoparticles (AuNPs) using guar gum (GG) as a reducing agent is reported. The nanoparticles obtained are characterized by UV-vis spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). Based on these results, a potential mechanism for this method of AuNPs synthesis is discussed. GG/AuNPs nanocomposite (GG/AuNPs NC) was exploited for optical sensor for detection of aqueous ammonia based on surface plasmon resonance (SPR). It was found to have good reproducibility, response times of similar to 10 s and excellent sensitivity with a detection limit of 1 ppb (parts-per-billion). This system allows the rapid production of an ultra-low-cost GG/AuNPs NC-based aqueous ammonia sensor.

Dilemas del paraíso : viaje, utopía ymundanidad en la literatura árabe

Resumen: La utopía y el relato de viaje conforman dos narrativas complementarias que describen mundos desconocidos, pero largamente anhelados. No obstante, en el contexto medieval, no podemos interpretar el concepto de utopía en el sentido político propio de la Modernidad, moriano, del término, sino como un proceso de construcción de expectativas que, a partir de un mismo modelo formal que se mantendrá a lo largo del tiempo en todas las manifestaciones de un país o sociedad ideal, tiende a ubicar en una lejanía inaccesible pero narrable la satisfacción de las necesidades de un presente difícil. Este es el caso de la Abundantia, la más antigua forma de utopía, vinculada al reino de Saturno y a sus múltiples versiones medievales: la Cucaña, el país de Jauja, el Dorado. Presente bajo diferentes formas en prácticamente todas las literaturas europeas occidentales, también la literatura árabe medieval hará un uso particular de la utopía y del relato de viaje, en donde incorporará su propia y específica visión religiosa y cultural. Nos proponemos entonces describir el modelo formal propio de la literatura utópica y la modalidad que adquirió el relato utópico de la Abundantia en el Islam, en particular en la leyenda de la Ciudad de Cobre, del geógrafo andalusí Abu Hamid al-Garnati, y su posterior desarrollo en Las mil y una noches.

El cuento de la doncella sin manos : versiones hispánicas medievales y la tradición oral en América

Resumen: A partir de la primera versión literaria en lengua vernácula del “Cuento de la doncella sin manos”, escrita por Philippe de Remi en el siglo XIII, la literatura medieval no dejó de reelaborar el relato a lo largo y a lo ancho del Occidente europeo. Del periodo que abarca desde el siglo XIII hasta el XVII nos llegan, por lo menos, unas treinta y cuatro versiones escritas solo en los ámbitos románico y germánico. Existe asimismo una tradición arábiga del cuento, probablemente de origen semítico, que constituiría, según algunos autores, una rama narrativa independiente. En la tradición oral el relato ha pervivido hasta nuestros días, en diversos países del mundo, incluida América del Sur, particularmente Brasil, Chile y la Argentina. El legado folclórico en Europa, inicialmente recopilado y puesto por escrito por los hermanos Grimm en 1812, presenta, ciertamente, numerosos puntos de contacto con las versiones americanas. Sin embargo, se ha establecido un vínculo aún más estrecho entre estas y los Cuentos populares españoles recogidos por Aurelio Espinosa en 1923, por un lado, así como también con una de las tres versiones provenientes del ámbito árabe. Luego de trazar un panorama histórico del corpus y estudiar los puntos de contacto entre la tradición europea y la americana, nos centraremos en el análisis de las versiones sudamericanas, particularmente las recogidas en la Argentina

Adbi'ilu : an arab at Babylon (BM 78912)

An unpublished tablet from the archive of Šumā descendant of Nappāu contains a possible Arabic personal name. The treatment of non-Babylonian personal names in this tablet and CTMMA 3 6 from the same archive differs from the treatment of Babylonian names suggesting that the scribe distinguished between the kin-groupaffiliated Babylonians and the non-Babylonians who lacked such affiliations.