The future of office property

The following paper considers the question, where to office property? In doing so, it focuses, in the first instance, on identifying and describing a selection of key forces for change present within the contemporary operating environment in which office property functions. Given the increasingly complex, dynamic and multi-faceted character of this environment, the paper seeks to identify only the primary forces for change, within the context of the future of office property. These core drivers of change have, for the purposes of this discussion, been characterised as including a range of economic, demographic and socio-cultural factors, together with developments in information and communication technology. Having established this foundation, the paper proceeds to consider the manner in which these forces may, in the future, be manifested within the office property market. Comment is offered regarding the potential future implications of these forces for change together with their likely influence on the nature and management of the physical asset itself. Whilst no explicit time horizon has been envisioned in the preparation of this paper particular attention has been accorded short to medium term trends, that is, those likely to emerge in the office property marketplace over the coming two decades. Further, the paper considers the question posed, in respect of the future of office property, in the context of developed western nations. The degree of commonality seen in these mature markets is such that generalisations may more appropriately and robustly be applied. Whilst some of the comments offered with respect to the target market may find application in other arenas, it is beyond the scope of this paper to explicitly consider highly heterogeneous markets. Given also the wide scope of this paper key drivers for change and their likely implications for the commercial office property market are identified at a global level (within the above established parameters). Accordingly, the focus is necessarily such that it serves to reflect overarching directions at a universal level (with the effect being that direct applicability to individual markets - when viewed in isolation on a geographic or property type specific basis – may not be fitting in all instances)

The Uses of Digital Literacy

Online social networks, user-created content and participatory media are often still ignored by professionals, denounced in the press and banned in schools. but the potential of digital literacy should not be underestimated. Hartley reassesses the historical and global context, commercial and cultural dynamics and the potential of popular productivity through analysis of the use of digital media in various domains, including creative industries, digital storytelling, YouTube, journalism and mediated fashion.

Developing a vision for an nD modelling tool

The design of a building is a complicated process, having to formulate diverse components through unique tasks involving different personalities and organisations in order to satisfy multi-faceted client requirements. To do this successfully, the project team must encapsulate an integrated design that accommodates various social, economic and legislative factors. Therefore, in this era of increasing global competition integrated design has been increasingly recognised as a solution to deliver value to clients.----- The ‘From 3D to nD modelling’ project at the University of Salford aims to support integrated design; to enable and equip the design and construction industry with a tool that allows users to create, share, contemplate and apply knowledge from multiple perspectives of user requirements (accessibility, maintainability, sustainability, acoustics, crime, energy simulation, scheduling, costing etc.). Thus taking the concept of 3-dimensional computer modelling of the built environment to an almost infinite number of dimensions, to cope with whole-life construction and asset management issues in the design of modern buildings. This paper reports on the development of a vision for how integrated environments that will allow nD-enabled construction and asset management to be undertaken. The project is funded by a four-year platform grant from the Engineering and Physical Sciences Research Council (EPSRC) in the UK; thus awarded to a multi-disciplinary research team, to enable flexibility in the research strategy and to produce leading innovation. This paper reports on the development of a business process and IT vision for how integrated environments will allow nD-enabled construction and asset management to be undertaken. It further develops many of the key issues of a future vision arising from previous CIB W78 conferences.

Creative Industries come to China (MATE)

This paper introduces the special issue “China: Internationalizing the Creative Industries”, describing the Australian Research Council funded “MATE” project which provides the conceptual background for the questions the issue explores. The MATE project began with the expectation that as China evolves from its status as a developing country with an emphasis on primary industries and manufacturing, to a mature, market-driven economy benefiting from high levels of international investment, it will become more actively engaged with the global “knowledge economy” and “information society”. In this context, developments in the “creative industries”, which are playing such an important role in developed economies, might reasonably be expected in China. Although China continues to be characterised by strong central-policy settings, as the domestic consumer market matures there is greater scope for consumer-led creative business development. The “MATE” project aimed to capture some of these changes as they began to gain momentum across a range of services: Media, Advertising, Tourism and Education. This special issue continues this theme with papers that explore the theoretical challenges, economic questions and implications, and practical instantiations of creative industries growth in China. All papers contained in this special issue have been peer-reviewed.

Creative urban regions : harnessing urban technologies to support knowledge city initiatives

In the rapidly growing knowledge economy, the talent and creativity of those around us will be increasingly decisive in shaping economic opportunity. Creativity can be described as the ability to produce new and original ideas and things. In other words, it is any act, idea, or product that changes an existing domain or transforms an existing domain into a new one. From an economic perspective, creativity can be considered as the generation of new ideas that is the major source of innovation and new economic activities. As urban regions have become the localities of key knowledge precincts and knowledge clusters across the globe, the link between a range of new technologies and the development of ‘creative urban regions’ (CURs) has come to the fore. In this sense, creativity has become a buzz concept in knowledge-economy research and policy circles. It has spawned ‘creative milieus,’ ‘creative industries,’ ‘creative cities,’ ‘creative class,’ and ‘creative capital.’ Hence, creativity has become a key concept on the agenda of city managers, development agents, and planners as they search for new forms of urban and economic development. CURs provide vast opportunities for knowledge production and spillover, which lead to the formation of knowledge cities. Urban information and communication technology (ICT) developments support the transformation of cities into knowledge cities. This book, which is a companion volume to Knowledge-Based Urban Development: Planning and Applications in the Information Era (also published by IGI Global) focuses on some of these developments. The Forward and Afterword are written by senior respected academic researchers Robert Stimson of the University of Queensland, Australia, and Zorica Nedovic-Budic of the University of Illinois at Urbana-Champaign, USA. The book is divided into four sections, each one dealing with selected aspects of information and communication technologies and creative urban regions.

The Figmentum Project: appropriating information and communication technologies to animate our urban fabric

This paper explores how we may design located information and communication technologies (ICTs) to foster community sentiment. It focuses explicitly on possibilities for ICTs to create new modalities of place through exploring key factors such as shared experiences, shared knowledge and shared authorship. To contextualise this discussion in a real world setting, this paper presents FIGMENTUM, a situated generative art application that was developed for and installed in a new urban development. FIGMENTUM is a non-authoritative, non-service based application that aims to trigger emotional and representational place-based communities. Out of this practice-led research comes a theory and a process for designing creative place-based ICT’s to animate our urban communities.

Technology strategy : findings from adoption and adaptation of Japanese manufacturing management (JMM) to ASEAN and Australasian automotive manufacturers

The purpose of this study is to demonstrate the appropriateness of “Japanese Manufacturing Management” (JMM) strategies in the Asian, ASEAN and Australasian automotive sectors. Secondly, the study assessed JMM as a prompt, effective and efficient global manufacturing management practice for automotive manufacturing companies to learn; benchmark for best practice; acquire product and process innovation, and enhance their capabilities and capacities. In this study, the philosophies, systems and tools that have been adopted in various automotive manufacturing assembly plants and their tier 1 suppliers in the three Regions were examined. A number of top to middle managers in these companies were located in Thailand, Indonesia, Malaysia, Singapore, Philippines, Viet Nam, and Australia and were interviewed by using a qualitative methodology. The results confirmed that the six pillars of JMM (culture change, quality at shop floor, consensus, incremental continual improvement, benchmarking, and backward-forward integration) are key enablers to success in adopting JMM in both automotive and other manufacturing sectors in the three Regions. The analysis and on-site interviews identified a number of recommendations that were validated by the automotive manufacturing company’s managers as the most functional JMM strategies.

Analyzing the prevalence of sports-related terms among the web sites of global corporations

This research investigates the prevalence of sports-related terms among the Web sites of the world’s leading companies, the Fortune Global 500. An automated process copied about four gigabytes of textual data, around 70 million words, from their sites. The subsequent analysis revealed regional and industry differences in the distribution of sports-related terms, the popularity of tennis stars and few references to sports stars, especially in Asia.

Research Monograph: The role of community and lifestyle in the making of a knowledge city

Our brief is to investigate the role of community and lifestyle in the making of a globally successful knowledge city region. Our approach is essentially pragmatic. We start by broadly examining knowledge-based urban development from a number of different perspectives. The first view is historical. In this context knowledge work and knowledge workers are seen as vital parts of a new emergent mode of production reliant on the continual production of abstract knowledge. We briefly develop this perspective to encompass the work of Richard Florida who has, notedly, claimed: “Wherever talent goes, innovation, creativity, and economic growth are sure to follow.” Our next perspective examines concepts of knowledge and modes of its production to discover knowledge is not an unchanging object but a human activity that changes in form and content through history. The suggestion emerges that not only is the production of contemporary ‘knowledge’ organised in a specific (and new) manner but also the output of this networked production is a particular type of knowledge (i.e. techné). The third perspective locates knowledge production and its workers in the contemporary urban context. As such, it co-ordinates the knowledge city in the increasingly global structure of cities and develops a typology of different groups of knowledge workers in their preferred urban environment(s). We see emerging here a distinctive geography of knowledge production. It is an urban phenomenon. There is, in short, something about the nature of cities that knowledge workers find particularly attractive. In the next, essentially anthropological, perspective we start to explore the needs and desires of the individual knowledge worker. Beyond the needs basic to any modern human household an attempt is made to deduce, from a base understanding of knowledge work as mental labour, the compensatory cultural needs of the knowledge worker when not at work - and the expression of these needs in the urban fabric. Our final perspective consists of two case studies. In a review of the experiences of Austin, Texas and Singapore’s one-north precinct we collect empirical data on, respectively, a knowledge city that has sustained itself for over 50 years and an urban precinct newly launched into the global market for knowledge work and knowledge workers. Interwoven The Role of Community and Lifestyle in the Making of a Knowledge City Urban Research Program 8 through all perspectives, in the form of apposite citation, is that of ‘expert opinion’ gathered in a rudimentary poll of academic and industry sources. This opinion appears in text boxes while details of the survey can be found in Appendix A. In the conclusion of the report we interpret the wide range of evidence gathered above in a policy frame. It is our hope this report will leave the reader with a clearer picture of the decisive organisational, infrastructural, aesthetic and social dimensions of a knowledge precinct.

Uncritical framing : lesson and knowledge structure in school science

There is clearly contention over the shape and formation of science curriculum and over, ultimately, what will count as scientific knowledge, skill, capacity and world view. The Cold War set the policy context for an ongoing focus on science education across Western nations. Sputnik-era US and UK educational policy offered a broad premise for the purpose of school science: in a risky geopolitical environment, high levels of advanced scientific expertise were central to the national interest and necessary for the maintenance of military/industrial and technological power. Half a century on, in the context of global economic and environmental crisis, as a justification for digital, industrial and biomedical innovation, the rationale for the production of scientific capital is central to curriculum settlements and educational policy in Europe, Asia and the Americas.