Carbonation front progress in mortars containing fly ash considering the presence of chloride ions

The incorporation of fly ash (FA) in cementitious matrices have been frequently used in order to make the matrix more resistant to the action of chlorides. On the other hand, it is known that Ca (OH)2 existing in the matrix is partially consumed by the pozzolanic reactions, which facilitates the advancement of carbonation. Given that the combined action between carbonation and chloride penetration is a fact little known, we speculate about the behaviour of the matrix in this context. This study investigates the influence of the presence of chlorides on the carbonation in mortars with FA. Samples with 0% and 40% replacement of cement CEM I 42.5 R for FA were molded with water/binder 0.56 and 0.52 respectively. After 90 days of curing the specimens were subjected to cycles of immersion/drying for 56 days. Half of the samples was subjected to the following cycle: two days in a solution containing NaCl (concentration equal to 3.5 %); 12 days in the carbonation chamber (4% of CO2). The other half was: two days in water; 12 days in the carbonation chamber. Then, the development of carbonation was evaluated. The results indicate that the presence of chlorides influences the carbonation. The specimens submitted to the exclusive action of CO2 showed a greater depth of carbonation compared to that presented by the specimens subjected to combined action. This may be related to changes in properties of the matrix which may lead to further refinement of the pores and related to the presence of the salt that can lead to partial filling of the pores and the increase in moisture content.

In-line rheo-optical characterization during small-scale polymer processing and compounding

As increasingly more sophisticated materials and products are being developed and times-to-market need to be minimized, it is important to make available fast response characterization tools using small amounts of sample, capable of conveying data on the relationships between rheological response, process-induced material structure and product characteristics. For this purpose, a single / twin-screw mini-extrusion system of modular construction, with well-controlled outputs in the range 30-300 g/h, was coupled to a in- house developed rheo-optical slit die able to measure shear viscosity and normal-stress differences, as well as performing rheo-optical experiments, namely small angle light scattering (SALS) and polarized optical microscopy (POM). In addition, the mini-extruder is equipped with ports that allow sample collection, and the extrudate can be further processed into products to be tested later. Here, we present the concept and experimental set-up [1, 2]. As a typical application, we report on the characterization of the processing of a polymer blend and of the properties of extruded sheets. The morphological evolution of a PS/PMMA industrial blend along the extruder, the flow-induced structures developed and the corresponding rheological characteristics are presented, together with the mechanical and structural characteristics of produced sheets. The application of this experimental tool to other material systems will also be discussed.

Implementation of a lean six sigma project in a production line

Companies from the motorcycles components branch are dealing with a dynamic environment, resulting from the introduction of new products and the increase of market demand. This dynamic environment requires frequent changes in production lines and requires flexibility in the processes, which can cause reductions in the level of quality and productivity. This paper presents a Lean Six Sigma improvement project performed in a production line of the company's machining sector, in order to eliminate losses that cause low productivity, affecting the fulfillment of the production plan and customer satisfaction. The use of Lean methodology following the DMAIC stages allowed analyzing the factors that influence the line productivity loss. The major problems and causes that contribute to a reduction on productivity and that were identified in this study are the lack of standardization in the setup activities and the excessive stoppages for adjustment of the processes that caused an increase of defects. Control charts, Pareto analysis and cause-and-effect diagrams were used to analyze the problem. On the improvement stage, the changes were based on the reconfiguration of the line layout as well as the modernization of the process. Overall, the project justified an investment in new equipment, the defective product units were reduced by 84% and an increase of 29% of line capacity was noticed.

On line pre-concentration for simultaneous determination of low molecular weight organic acids and inorganic anions in Amazonian river water samples employing ion chromatography with conductivity detection

An ion chromatography procedure, employing an IonPac AC15 concentrator column was used to investigate on line preconcentration for the simultaneous determination of inorganic anions and organic acids in river water. Twelve organic acids and nine inorganic anions were separated without any interference from other compounds and carry-over problems between samples. The injection loop was replaced by a Dionex AC15 concentrator column. The proposed procedure employed an auto-sampler that injected 1.5 ml of sample into a KOH mobile phase, generated by an Eluent Generator, at 1.5 mL min-1, which carried the sample to the chromatographic columns (one guard column, model AG-15, and one analytical column, model AS15, with 250 x 4mm i.d.). The gradient elution concentrations consisted of a 10.0 mmol l-1 KOH solution from 0 to 6.5 min, gradually increased to 45.0 mmol l-1 KOH at 21 min., and immediatelly returned and maintained at the initial concentrations until 24 min. of total run. The compounds were eluted and transported to an electro-conductivity detection cell that was attached to an electrochemical detector. The advantage of using concentrator column was the capability of performing routine simultaneous determinations for ions from 0.01 to 1.0 mg l-1 organic acids (acetate, propionic acid, formic acid, butyric acid, glycolic acid, pyruvate, tartaric acid, phthalic acid, methanesulfonic acid, valeric acid, maleic acid, oxalic acid, chlorate and citric acid) and 0.01 to 5.0 mg l-1 inorganic anions (fluoride, chloride, nitrite, nitrate, bromide, sulfate and phosphate), without extensive sample pretreatment and with an analysis time of only 24 minutes.

Off-line simulation inspires insight: a neurodynamics approach to efficient robot task learning

There is currently an increasing demand for robots able to acquire the sequential organization of tasks from social learning interactions with ordinary people. Interactive learning-by-demonstration and communication is a promising research topic in current robotics research. However, the efficient acquisition of generalized task representations that allow the robot to adapt to different users and contexts is a major challenge. In this paper, we present a dynamic neural field (DNF) model that is inspired by the hypothesis that the nervous system uses the off-line re-activation of initial memory traces to incrementally incorporate new information into structured knowledge. To achieve this, the model combines fast activation-based learning to robustly represent sequential information from single task demonstrations with slower, weight-based learning during internal simulations to establish longer-term associations between neural populations representing individual subtasks. The efficiency of the learning process is tested in an assembly paradigm in which the humanoid robot ARoS learns to construct a toy vehicle from its parts. User demonstrations with different serial orders together with the correction of initial prediction errors allow the robot to acquire generalized task knowledge about possible serial orders and the longer term dependencies between subgoals in very few social learning interactions. This success is shown in a joint action scenario in which ARoS uses the newly acquired assembly plan to construct the toy together with a human partner.

Exploring the role of O-Mannosylation in the modulation of E-Cadherin function in Gastric Cancer cell line models

Dissertação de mestrado em Bioquímica Aplicada – Biomedicina

Estudo das tecnologias de interatividade no processo de compra em contexto das lojas de vestuário on-line

Dissertação de mestrado em Design de Comunicação de Moda

Single line for assembly just-in-sequence multiple models

Programa Doutoral em Líderes para as Indústrias Tecnológicas

In-line rheo-optical microstructural characterization of complex polymer systems

Tese de Doutoramento em Ciência e Engenharia de Polímeros e Compósitos.

A tradução de negócios e projetos on-line na empresa Bloomidea

Relatório de estágio de mestrado em Tradução e Comunicação Multilingue

Hipometilação do LINE-1 está Associada ao Risco de Doença Cardíaca Coronariana na População Chinesa

Fundamentos: O nível de metilação global do ADN de leucócitos no sangue tem sido associado ao risco de doença arterial coronariana (DAC), com resultados inconsistentes em diferentes populações. Faltam dados semelhantes da população chinesa, onde diferentes fatores genéticos, de estilo de vida e ambientais podem afetar a metilação do ADN e sua relação com o risco de DCC. Objetivos: Analisar se a metilação global está associada ao risco de doença coronariana na população chinesa. Métodos: Foram incluídos um total de 334 casos de DCC e 788 controles saudáveis. A metilação global do ADN de leucócitos de sangue foi estimada por meio da análise das repetições do LINE-1 usando pirosequenciamento de bissulfito. Resultados: Em uma análise inicial restrita aos controles o nível do LINE-1 diminui significativamente com a idade avançada, colesterol total elevado, e diagnóstico de diabetes. Na análise de caso-controle, a redução da metilação do LINE-1 foi associada ao aumento do risco de DCC, tendo a análise por quartil revelado uma odds ratio (IC 95%) de 0,9 (0,6-1,4), 1,9 (1,3-2,9) e 2,3 (1,6 3.5) para o terceiro, segundo e primeiro (o mais baixo) quartil (P da tendência < 0,001), respectivamente, em comparação com o quarto (o mais alto) quartil. A metilação inferior (< mediana) do LINE-1 esteve associada a 2,2 vezes (IC 95% = 1,7-3,0) o aumento de risco de doença coronariana. As estimativas de risco de DCC menores relacionadas com o LINE-1 tenderam a ser mais fortes entre os indivíduos com maior tercil de homocisteína (P interação = 0,042) e naqueles com diagnóstico de hipertensão arterial (P interação = 0,012). Conclusão: A hipometilação do LINE-1 está associada ao risco de doença coronariana na população chinesa. Fatores de risco de DCC potenciais tais como a idade avançada, colesterol total elevado, e diagnóstico de diabetes podem ter impacto na metilação global do ADN, exercendo, portanto, o seu efeito sobre o risco de doença coronariana.

Function and regulation of death-associated protein kinase1 (DAPK) in colon cancer cells and macrophage-like cell line : identifcation of p38 as a novel DAPK interacting partner during TNFα-mediated apoptosis in colon cancer

DAPK, Apoptosis, p38, macrophages, survival

Suche in on-line-erfassten digitalen Handschriftdokumenten

Magdeburg, Univ., Fak. für Informatik, Diss., 2008

Erweiterung der Transmission-Line-Methode auf die Biegewelle zur Simulation von Crashsensorsignalen

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2011