The creativity imperative : implications for education research

Arguing for the importance of understanding the conditions under which certain forms of the social subject become visible and viable, this chapter conceptualises the current educational focus on ‘creativity’ as a technology of governmentality that has arisen from the perceived need for governing authorities to manage and responsibilise populations for the pervasive uncertainties of the global economy. With reference to the document, Tough Choices or Tough Times, a publication of the National Center on Education and the Economy in the United States, we show how creativity has been reframed as a programmable capacity of the modern student, citizen and worker primarily because it is considered an indispensible source of enterprise and innovation. Education and family life are an integral part of this bio-politics and the ongoing ‘economisation’ of social life. Our concern is that this reductionist understanding of creativity precludes other transgressive and culturally enriching creativities that represent the infinite range of subjectivities associated with imaginative human capacity and activity. It is vital therefore that educational research renders this historical process transparent and opens spaces for more socially inclusive, sustainable and productive ways of being such as those indicated by the three respondees.

Teaching Teachers for the Future (TTF) Project TPACK Survey : summary of the key findings

This paper presents a summary of the key findings of the TTF TPACK Survey developed and administered for the Teaching the Teachers for the Future (TTF) Project implemented in 2011. The TTF Project, funded by an Australian Government ICT Innovation Fund grant, involved all 39 Australian Higher Education Institutions which provide initial teacher education. TTF data collections were undertaken at the end of Semester 1 (T1) and at the end of Semester 2 (T2) in 2011. A total of 12881 participants completed the first survey (T1) and 5809 participants completed the second survey (T2). Groups of like-named items from the T1 survey were subject to a battery of complementary data analysis techniques. The psychometric properties of the four scales: Confidence - teacher items; Usefulness - teacher items; Confidence - student items; Usefulness- student items, were confirmed both at T1 and T2. Among the key findings summarised, at the national level, the scale: Confidence to use ICT as a teacher showed measurable growth across the whole scale from T1 to T2, and the scale: Confidence to facilitate student use of ICT also showed measurable growth across the whole scale from T1 to T2. Additional key TTF TPACK Survey findings are summarised.

Does improving school level attendance lead to improved school level achievement? An empirical study of indigenous educational policy in Australia

Current federal government policy initiatives in Aboriginal education and social welfare reform are based on assumptions about the relationship between increased attendance and increased student performance on standardized tests. There are empirical assumptions underlying these policy interventions and their accompanying public debates. Our aim here is to empirically explore the relationships between patterns of student attendance and patterns of student achievement in schools with significant cohorts of Aboriginal and/or Torres Strait Islander students at the school level. Based on an analysis of the publicly available data reported on the ‘MySchool’ website, we find that reforms and policies around attendance have not and are unlikely to generate patterns of improved achievement. Questions about the rationale and rhetoric of government policy focused at the school level as opposed to the need to focus on pedagogy and curriculum are discussed.

Recruiting career-change professionals as teachers: the challenge of socialization into teaching

In many countries there is a shortage of quality teachers in areas of science, technology, engineering and mathematics (STEM). One solution has been to encourage mid-career professionals in the area of STEM to become school teachers. The transition of mid-career professionals to science and mathematics teaching in schools is thus becoming a common phenomenon. The assumption exists that their experiences and enthusiasm for their subject matter will inspire more students to achieve greater outcomes in school and to pursue careers in the sciences. Although the experiences of beginning teachers have been extensively studied for over half a century, there has been little research on career-change teachers and the particular challenges that they face in becoming school teachers. These career-changers have constructed professional identities and are accustomed to working within a culture of collaboration and inquiry. In contrast school cultures are quite different and often teaching is a lonely solitary affair with little opportunity for collegial relationships aimed at knowledge building in the context of teaching. This research was a longitudinal study that followed 17 teachers from the commencement of teaching. Most of these teachers left professional careers to become teachers. Seven remained in teaching after three years.

Primary schools and the delivery of relationships and sexuality education : the experience of Queensland teachers

Primary school provides an appropriate opportunity for children to commence comprehensive relationships and sexuality education (RSE), yet many primary school teachers avoid teaching this subject area. In the absence of teacher confidence and competence, schools have often relied on health promotion professionals, external agencies and/or one-off issue related presentations rather than cohesive, systematic and meaningful health education. This study examines the implementation of a ten-lesson pilot RSE unit of work and accompanying assessment task in two primary schools in South-East Queensland, Australia. Drawing predominantly from qualitative data, this research explores the experiences of primary school teachers as they engage with RSE curriculum resources and content delivery. The results show that the provision of a high quality RSE curriculum resource grounded in contemporary educational principles and practices enables teachers to feel more confident to deliver RSE and minimises potential barriers such as parental objections and fear of mishandling sensitive content.

Why ADR must be a mandatory subject in the law degree : A cheat sheet for the willing and a primer for the non-believer

The profession of law is deeply steeped in tradition and conservatism, which influences the content and pedagogy employed in law faculties across Australia. Indeed, the practice of law and the institutions of legal education are in a relationship of mutual influence; a dénouement which preserves the best aspects of the common law legal system, but also leaves the way we educate, practice and think about the role of law resistant to change. In this article, the authors lay down a challenge to legal education orthodoxy and a call to arms for legal academic progressivists: that alternative dispute resolution (ADR) should be a compulsory, stand alone subject in the law degree. The authors put forward 10 simple arguments as to why every law student should be exposed to a semester-long course of ADR instruction.

Quantitative fit analysis of orthopedic bone plates : methods, criteria and approach

Studies on quantitative fit analysis of precontoured fracture fixation plates emerged within the last few years and therefore, there is a wide research gap in this area. Quantitative fit assessment facilitates the measure of the gap between a fracture fixation plate and the underlying bone, and specifies the required plate fit criteria. For clinically meaningful fit assessment outcome, it is necessary to establish the appropriate criteria and parameter. The present paper studies this subject and recommends using multiple fit criteria and the maximum distance between the plate and underlying bone as fit parameter for clinically relevant outcome. We also propose the development of a software tool for automatic plate positioning and fit assessment for the purpose of implant design validation and optimization in an effort to provide better fitting implant that can assist proper fracture healing. The fundamental specifications of the software are discussed.

Educational programmes for primary prevention of skin cancer (Protocol)

This is the protocol for a review and there is no abstract. The objectives are as follows: To assess the effects of education programmes for skin cancer prevention in the general population. Description of the condition Skin cancer is a term that includes both melanoma and keratinocyte cancer. Keratinocyte cancer (also known as nonmelanoma skin cancer) generally refers to basal cell carcinoma (BCC) and squamous cell carcinoma (SCC), although it also includes other rare cutaneous neoplasms (Madan 2010). Skin cancer is the most common cancer in populations of predominantly fair-skinned people (Donaldson 2011; Lomas 2012; Stern 2010), with incidence increasing (Garbe 2009; Leiter 2012). There are variations in annual incidence rates between these populations, with Australia reporting the highest rate of skin cancer in the world (Lomas 2012). In 2012, the estimated age-standardised incidence rate for melanoma was almost 63 per 100,000 people for Australian men, and 40 per 100,000 people for Australian women (AIHW 2012). In Europe, incidence rates range from 10 to 15 per 100,000 people (Garbe 2009; Lasithiotakis 2006), with rates highest amongst men (Stang 2006). In the United States, incidence rates are approximately 18 per 100,000 people (Garbe 2009),with the highest rates reported forwomen (Bradford 2010). Keratinocyte cancer is much more common than melanoma. In 2012, the estimated Australian age-standardised rates for BCCand SCC were 884 and 387 per 100,000 people, respectively (Staples 2006). The cumulative three-year risk of developing a subsequent keratinocyte cancer is 18% for SCC and 44% for BCC (Marcil 2000).

Critical care nurses' perceptions of their educational needs

A survey of nurses working in critical care units in 89 Queensland hospitals was conducted to investigate their perceptions of critical care nurses' educational needs. Two thirds of the 62 respondents were from rural units and one third were from metropolitan units. Most respondents, irrespective of geographic location, wanted critical care education to be located in hospitals and to be accredited as a graduate diploma course. Rural and metropolitan nurses had similar educational needs and many worked for hospitals that were not offering adequate orientation or inservice critical care education. The findings that nursing staff turnover was a problem in metropolitan units and that the rural workforce was more stable have implications for the development of educational programs.

Numerical modelling and design of lipped channel beams subject to shear

Cold-formed steel members are increasingly used as primary structural elements in buildings due to the availability of thin and high strength steels and advanced cold-forming technologies. Cold-formed lipped channel beams (LCB) are commonly used as flexural members such as floor joists and bearers. Many research studies have been carried out to evaluate the behaviour and design of LCBs subject to pure bending actions. However, limited research has been undertaken on the shear behaviour and strength of LCBs. Hence a numerical study was undertaken to investigate the shear behaviour and strength of LCBs. Finite element models of simply supported LCBs with aspect ratios of 1.0 and 1.5 were considered under a mid-span load. They were then validated by comparing their results with test results and used in a detailed parametric study based on the validated finite element models. Numerical studies were conducted to investigate the shear buckling and post-buckling behaviour of LCBs. Experimental and numerical results showed that the current design rules in cold-formed steel structures design codes are very conservative for the shear design of LCBs. Improved design equations were therefore proposed for the shear strength of LCBs. This paper presents the details of this numerical study of LCBs and the results.

Numerical studies and design of hollow flange channel beams subject to combined bending and shear actions

LiteSteel beam (LSB) is a cold-formed steel hollow flange channel section produced using a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. It is commonly used as floor joists and bearers in residential, industrial and commercial buildings. Design of the LSB is governed by the Australian cold-formed steel structures code, AS/NZS 4600. Due to the geometry of the LSB, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, currently available design equations for common cold-formed sections are not directly applicable to the LSB. Many research studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions and predominant shear actions. To date, however, no investigation has been conducted into the strength of LSB sections under combined bending and shear actions. Hence experimental and numerical studies were conducted to assess the combined bending and shear behaviour of LSBs. Finite element models of LSBs were developed to simulate their combined bending and shear behaviour and strength of LSBs. They were then validated by comparing the results with available experimental test results and used in a detailed parametric study. The results from experimental and finite element analyses were compared with current AS/NZS 4600 and AS 4100 design rules. Both experimental and numerical studies show that the AS/NZS 4600 design rule based on circular interaction equation is conservative in predicting the combined bending and shear capacities of LSBs. This paper presents the details of the numerical studies of LSBs and the results. In response to the inadequacies of current approaches to designing LSBs for combined bending and shear, two lower bound design equations are proposed in this paper.

Using visualization tool to help engineering students learning dynamics

Dynamics is an essential core engineering subject. It includes high level mathematical and theoretical contents, and basic concepts which are abstract in nature. Hence, Dynamics is considered as one of the hardest subjects in the engineering discipline. To assist our students in learning this subject, we have conducted a Teaching & Learning project to study ways and methods to effectively teach Dynamics based on visualization techniques. The research project adopts the five basic steps of Action Learning Cycle. It is found that visualization technique is a powerful tool for students learning Dynamics and helps to break the barrier of students who perceived Dynamics as a hard subject.

Retooling Chinese primary school teachers to use technology creatively to promote innovation and problem solving skills in science classrooms

This paper reports on the initial phase of a Professional Learning Program (PLP) undertaken by 100 primary school teachers in China that aimed to facilitate the development of adaptive expertise in using technology to facilitate innovative science teaching and learning such as that envisaged by the Chinese Ministry of Education’s (2010-2020) education reforms. Key principles derived from literature about professional learning and scaffolding of learning informed the design of the PLP. The analysis of data revealed that the participants had made substantial progress towards the development of adaptive expertise. This was manifested not only by advances in the participants’ repertoires of Subject Matter Knowledge and Pedagogical Content Knowledge but also in changes to their levels of confidence and identities as teachers. By the end of the initial phase of the PLP, the participants had coalesced into a professional learning community that readily engaged in the sharing, peer review, reuse and adaption, and collaborative design of innovative science learning and assessment activities. The findings from the study indicate that those engaged in the development of PLPs for teachers in China need to take cognizance of certain cultural factors and traditions idiosyncratic to the Chinese educational system. A set of revised principles is then presented to inform the future design and implementation of PLPs for teachers in China.

Design of light gauge steel roofing systems subject to high wind forces

Light gauge steel roofing systems made of thin profiled roof sheeting and battens are used commonly in residential, industrial and commercial buildings. Their critical design load combination is that due to wind uplift forces that occur during high wind events such as tropical cyclones and thunderstorms. However, premature local failures at their screw connections have been a concern for many decades since cyclone Tracy that devastated Darwin in 1974. Extensive research that followed cyclone Tracy on the pull-through and pull-out failures of roof sheeting to batten connections has significantly improved the safety of roof sheeting. However, this has made the batten to rafter/truss connection the weakest, and recent wind damage investigations have shown the failures of these connections and the resulting loss of entire roof structures. Therefore an experimental research program using both small scale and full scale air-box tests is currently under way to investigate the pull-through failures of thin-walled steel battens under high wind uplift forces. Tests have demonstrated that occurrence of pull-through failures in the bottom flanges of steel batttens and the need to develop simple test and design methods as a function of many critical parameters such as steel batten geometry, thickness and grade, screw fastener sizes and other fastening details. This paper presents the details of local failures that occur in light fauge roofing systems, a review of the current design and test methods for steel battens and associated short comings, and the test results obtained to date on pull-through failures of battens from small scale and full scale tests. Finally, it proposes the use of suitable small scale test methods that can be used by both researchers and manufacturers of such screw-fastened light gauge steel batten systems.