The study and measurements of the behaviour and characteristics of electromagnetic relays

The thesis presents a theoretical and practical study of the dynamic behaviour of electromagnetic relays. After discussing the problem of solving the dynamicc equations analytically and presenting a historical survey of the earlier works in the relay and its dynamics, the simulation of a relay on the analogue computer is discussed. It is shown that the simulation may be used to obtain specific solutions to the dynamic equations. The computer analysis provides the dynamic characteristics for design purposes and may be used in the study of bouncing, rebound oscillations and stability of the armature motion. An approximate analytical solution to the two dynamic equations is given based on the assumption that the dynamic variation of the pull with the position of the armature is linear. The assumption is supported by the Computer-aided analysis and experimental results. The solution is intended to provide a basis for a rational design. A rigorous method of analysing the dynamic performance by using Ahlberg's theory is also presented. This method may be justified to be the extension of Ahlberg's theory by taking the mass and frictional damping forces into account. While calculating the armature motion mathematically, Ahlberg considers the equilibrium of two kinds of forces, namely pull and load, and disregards the mass and friction forces, whereas the present method deals with the equilibrium of all four kinds of forces. It is shown how this can be utilised to calculate the dynamic characteristics for a specific design. The utility of this method also extends to the study of stability, contact bounce and armature rebound. The magnetic circuit and other related topics which are essential to the study of relay dynamics are discussed and some necessary experimental results are given.

Ambient vibration tests and analysis of a multiple-span elevated bridge

Peer reviewed

Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition – Part I: Tests and finite element analysis

Web openings could be used in cold-formed steel beam members, such as wall studs or floor joints, to facilitate ease of services in buildings. In this paper, a combination of tests and non-linear finite element analyses is used to investigate the effect of such holes on web crippling under end-one-flange (EOF) loading condition; the cases of both flanges fastened and unfastened to the bearing plates are considered. The results of 74 web crippling tests are presented, with 22 tests conducted on channel sections without web openings and 52 tests conducted on channel sections with web openings. In the case of the tests with web openings, the hole was either located centred above the bearing plates or having a horizontal clear distance to the near edge of the bearing plates. A good agreement between the tests and finite element analyses was obtained in term of both strength and failure modes.

National incomes and economic growth in pre-industrial Europe: insights from recent research

Pessimistic Malthusian verdicts on the capacity of pre-industrial European economies to sustain a degree of real economic growth under conditions of population growth are challenged using current reconstructions of urbanisation ratios, the real wage rates of building and agricultural labourers, and GDP per capita estimated by a range of methods. Economic growth is shown to have outpaced population growth and raised GDP per capita to in excess of $1,500 (1990 $ international at PPP) in Italy during its twelfth- and thirteenth-century commercial revolution, Holland during its fifteenth- and sixteenth-century golden age, and England during the seventeenth- and eighteenth-century runup to its industrial revolution. During each of these Smithian growth episodes expanding trade and commerce sustained significant output and employment growth in the manufacturing and service sectors. These positive developments were not necessarily reflected by trends in real wage rates for the latter were powerfully influenced by associated changes in relative factor prices and the per capita supply of labour as workers varied the length of the working year in order to consume either more leisure or more goods. The scale of the divergence between trends in real wage rates and GDP per capita nevertheless varied a great deal between countries for reasons which have yet to be adequately explained.

Diagnostic Tests and their Application in the Management of Soil- and Water-borne Oomycete Pathogen Species

Oomycete diseases cause significant losses across a broad range of crop and aquaculture commodities worldwide. These losses can be greatly reduced by disease management practices steered by accurate and early diagnoses of pathogen presence. Determinations of disease potential can help guide optimal crop rotation regimes, varietal selections, targeted control measures, harvest timings and crop post-harvest handling. Pathogen detection prior to infection can also reduce the incidence of disease epidemics. Classical methods for the isolation of oomycete pathogens are normally deployed only after disease symptom appearance. These processes are often-time consuming, relying on culturing the putative pathogen(s) and the availability of expert taxonomic skills for accurate identification; a situation that frequently results in either delayed application, or routine ‘blanket’ over-application of control measures. Increasing concerns about pesticides in the environment and the food chain, removal or restriction of their usage combined with rising costs have focussed interest in the development and improvement of disease management systems. To be effective, these require timely, accurate and preferably quantitatve diagnoses. A wide range of rapid diagnostic tools, from point of care immunodiagnostic kits to next generation nucleotide sequencing have potential application in oomycete disease management. Here we review currently-available as well as promising new technologies in the context of commercial agricultural production systems, considering the impacts of specific biotic and abiotic and other important factors such as speed and ease of access to information and cost effectiveness

Bodies on the Line: Violence, Disposable Subjects, and the US-Mexico Border Industrial Complex

Bodies On the Line: Violence, Disposable Subjects, and the Border Industrial Complex explores the construction of identity and notions of belonging within an increasingly privatized and militarized Border Industrial Complex. Specifically, the project interrogates how discourses of Mexican migrants as racialized, gendered, and hypersexualized “deviants” normalize violence against border crossers. Starting at Juárez/El Paso border, I follow the expanding border, interrogating the ways that Mexican migrants, regardless of sexual orientation, have been constructed and disciplined according to racialized notions of “sexual deviance." I engage a queer of color critique to argue that sexual deviance becomes a justification for targeting and containing migrant subjects. By focusing on the economic and racially motivated violence that the Border Industrial Complex does to Mexican migrant communities, I expand the critiques that feminists of color have long leveraged against systemic violence done to communities of color through the prison industrial system. Importantly, this project contributes to transnational feminist scholarship by contextualizing border violence within the global circuits of labor, capital, and ideology that shape perceptions of border insecurity. The project contributes an interdisciplinary perspective that uses a multi-method approach to understand how border violence is exercised against Mexicans at the Mexico-US border. I use archival methods to ask how historical records housed at the National Border Patrol Museum and Memorial Library serve as political instruments that reinforce the contemporary use of violence against Mexican migrants. I also use semi-structured interviews with nine frequent border crossers to consider the various ways crossers defined and aligned themselves at the border. Finally, I analyze the master narratives that come to surround specific cases of border violence. To that end, I consider the mainstream media’s coverage, legal proceedings, and policy to better understand the racialized, gendered, and sexualized logics of the violence.

Kinetic and mechanistic studies on peroxidation and stabilization of lipids with industrial and biological relevance

Lipid peroxidation is a complex mechanism that causes the degradation of lipid material of both industrial and biological significance. During processing, it is known that thermal stress produces oxidation and polymerization of oils. Additionally, biological lipids with both structural and bioactive roles are prone to peroxidation, which can have pathogenic effects including cancer and long-term degenerative disorders. To create innovative strategies to slow down the deterioration of lipids, it is crucial to improve our understanding of oxidation reactions and kinetics. To this purpose, Chapter II of this thesis focuses on the kinetic study of the oxidation reactions that take place during the thermal processing of bio-oils for industrial application. Through a new method it was possible to evaluate the kinetic parameters of oxidation of various lipid materials. This allowed us to distinguish between the different lipid materials based on their intrinsic properties. The effect of 18 antioxidants from the major families of natural and synthetic phenols were studied using the same methodology in order to acquire crucial data for enhancing the antioxidant activity of phenols based on structure-activity at high temperatures. Finally, it has been described how the antioxidant activity of α-tocopherol, revealed to be scarce in our conditions, can be improved in the presence of gamma-terpinene, through a synergistic action. Chapter III describes the synthesis and study of the antioxidant activity of polydopamine nanoparticles, in order to clarify the unclear mechanism of action of this material. Finally, in Chapter IV it was reported how the gamma-terpinene strongly inhibits the peroxidation of unsaturated lipids in heterogeneous model systems (micelles and liposomes) by forming hydroperoxyl radicals which diffuse outside the lipid nucleus, blocking the propagation of the chain radical. Furthermore, gamma-terpinene shows a very potent protective activity against ferroptosis being effective in the nanomolar range in the human neuroblastoma cell model.

Analysis and improvements of an existing industrial hot stamping machine

The importance of product presentation in the marketing industry is well known. Labels are crucial for providing information to the buyer, but at a modest additional expense, a beautiful label with exquisite embellishments may also give the goods a sensation of high quality and elegance. Enhancing the capabilities of stamping machines is required to keep up with the increasing velocity of the production lines in the modern manufacturing industry and to offer new opportunities for customization. It’s in this context of improvements and refinements that this work takes place. The thesis was developed during an internship at Studio D, the firm that designs the mechanics of the machines produced by Cartes. The The aim of this work is to study possible upgrades for the existing hot stamping machines. The main focus of this work is centred on two objectives: first, evaluating the pressing forces generated by this machine and characterising how the mat used in the stamping process reacts to such forces. Second, propose a new conformation for the press mechanism in order to improve the rigidity and performance of the machines. The first objective is reached through a combined approach: the mat is crudely characterized with experimental data, while the frame of the machine is studied through FEM analysis. The results obtained are combined and used to upgrade a worksheet that allows to estimate the forces exerted by the machines. The second objective is reached with the proposal of new, improved designs for the main components of the machines.

Axis control optimization: autotuning techniques and frequency response analysis of industrial mechatronic systems

In the field of industrial automation, there is an increasing need to use optimal control systems that have low tracking errors and low power and energy consumption. The motors we are dealing with are mainly Permanent Magnet Synchronous Motors (PMSMs), controlled by 3 different types of controllers: a position controller, a speed controller, and a current controller. In this thesis, therefore, we are going to act on the gains of the first two controllers by going to find, through the TwinCAT 3 software, what might be the best set of parameters. To do this, starting with the default parameters recommended by TwinCAT, two main methods were used and then compared: the method of Ziegler and Nichols, which is a tabular method, and advanced tuning, an auto-tuning software method of TwinCAT. Therefore, in order to analyse which set of parameters was the best,several experiments were performed for each case, using the Motion Control Function Blocks. Moreover, some machines, such as large robotic arms, have vibration problems. To analyse them in detail, it was necessary to use the Bode Plot tool, which, through Bode plots, highlights in which frequencies there are resonance and anti-resonance peaks. This tool also makes it easier to figure out which and where to apply filters to improve control.

Relações entre aptidão fisica, sexo, idade, nivel de atividade fisica e supervisão dos exercicios em individuos fisicamente ativos de 50 a 79 anos de idade

Universidade Estadual de Campinas . Faculdade de Educação Física

Effect of a novel beta-adrenoceptor agonist (Ro 40-2148) on resting energy expenditure in obese women.

The aim of this single-blind, placebo-controlled study was to investigate the effects of the new beta-adrenergic compound Ro 40-2148 on resting energy expenditure (REE) at rest and after an oral glucose load in non-diabetic obese women before and after two weeks of treatment. After one week of placebo administration and after an overnight fast and one hour rest, REE and glucose and lipid oxidation rates were measured by indirect calorimetry (hood system) before and for 6 h after a single dose of placebo solution. A 75 g oral glucose tolerance test (OGTT) was performed during this period starting 90 min after the placebo administration. During the following two weeks, using a randomization design, six patients received Ro 40-2148 at a dose of 400 mg diluted in 100 ml water twice a day (i.e. 800 mg per day), while six others continued with the placebo administration. The same tests and measurements were repeated after two weeks, except for the treatment group which received the drug instead of the placebo. The 14-day period of drug administration did not increase REE measured in post-absorptive conditions. Similarly, there was no acute effect on REE of a 400 mg dose of Ro 40-2148. In contrast, glucose-induced thermogenesis was significantly increased after two weeks in the treatment group (means +/- s.e.m.: 3.7 +/- 1.3%, P = 0.047), while no change was observed in the placebo group (-0.8 +/- 0.7%, not significant). Since there was no significant change in the respiratory quotient, the increase in energy expenditure observed in the treatment group was due to stimulation of both lipid and glucose oxidation. The drug induced no variations in heart rate, blood pressure, axillary temperature or in plasma glucose, insulin and free fatty acid levels. In conclusion, this study shows that Ro 40-2148 activates glucose-induced thermogenesis in obese non-diabetic patients.

Polttoaineen reaktiivisuuden määrittäminen kiertoleijupoltossa

Kehitettäessä leijupolttotekniikkaa entistä ympäristöystävällisemmäksi ja tehokkaammaksi tarvitaan lisää tietoa polttoaineen käyttäytymisestä tulipesässä. Polttoaineen palamisprofiili ja reaktiivisuus vaikuttavat oleellisesti esimerkiksi voimalaitoskattilan lämmönsiirtopintojen sijoitteluun ja suunnitteluun sekä ohjausjärjestelmän toteutukseen. Varsinkin monipolttoainekattiloilla ohjausjärjestelmän toimivuus joutuu koetukselle esimerkiksi kuormanmuutostilanteissa ja äkillisissä polttoaineen syöttöhäiriöissä. Tässä työssä on aluksi tutustuttu kiertoleijupolton ilmiöihin ja niiden matemaattiseen mallintamiseen. Lisäksi esitetään katsaus eri prosessiolosuhteiden vaikutuksesta palamiseen kiertoleijuolosuhteissa. Työn tutkimusosassa kehitettiin menetelmä polttoaineen reaktiivisuuden määrittämiseksi kiertoleijupoltossa. Kehitetty menetelmä koostuu koesarjasta ja matemaattisesta simulointimallista. Koetoiminta suoritettiin VTT Energian laboratoriokokoluokan kiertoleijukoelaitteella. Koesarja polttoaineen reaktiivisuuden määrittämiseksi sisältää eri kaasukomponenttien profiilimittauksia ja dynaamisia muutoskokeita. Menetelmän avulla voidaan tutkia eri polttoaineiden reaktiivisuuksia sekä polttoaineen reaktiivisuuden ja tietyn prosessiolosuhteen välistä riippuvuutta. Suorittamalla koeajomatriisin mukaiset kokeet tietyissä prosessiolosuhteissa voidaan polttoaineen reaktiivisuus selvittää koetulosten ja simulointimallin perusteella.

La Prova d'avaluació escrita reflecteix els aprenentatges? La resposta dels estudiants

Les directrius de l’Espai Europeu d’Educació Superior proposen un nou model d’aprenentatge per competències que requereix una planificació de la docència centrada en l’estudiant. L’avaluació és un element clau a l’hora de dissenyar la guia docent de les assignatures. En aquesta comunicació es presenta una experiència d’avaluació de la percepció dels alumnes respecte a la prova en forma d’examen de dues assignatures dels estudis de Psicologia. Els estudiants van respondre la prova escrita i immediatament després en van fer una valoració mitjançant un autoinforme de preguntes obertes. Es descriu si els alumnes han considerat que la prova d’avaluació permetia reflectir els aprenentatges. S’exposen quines competències han quedat sense avaluar segons els estudiants i es recullen propostes de millora suggerides pels universitaris

Envelhecimento e doenças neurodegenerativas crônicas na Amazônia brasileira: implantação de novas metodologias de avaliação em pacientes com declínio cognitivo leve e doença de Alzheimer

Em 2025 o número de idosos no mundo irá dobrar e por volta de 2050 alcançará dois bilhões de indivíduos, estando a maioria em países desenvolvidos. A doença de Alzheimer (DA) é a quarta doença que mais compromete a qualidade de vida dos idosos. Este trabalho pretende sugerir novas metodologias de avaliação de pacientes com declínio cognitivo e doença de Alzheimer, apresentando uma versão brasileira a partir da versão original em língua inglesa intitulada “Test Your Memory” TYM (“teste sua memória- TSM), bem como mostrar os resultados do desempenho dos idosos na bateria de testes neuropsicológicos de Cambridge (CANTAB). Trata-se de estudo analítico, transversal retrospectivo do tipo caso-controle, realizado em pacientes do ambulatório de Geriatria do Hospital Universitário João de Barros Barreto, e em voluntários da comunidade no período de janeiro de 2009 a janeiro de 2011. Participaram 95 indivíduos com 65 ou mais anos de idade, divididos em 3 grupos: Alzheimer (DA, n=21), declínio cognitivo (DCL, n=31) e controle (n=43). Foram excluídos pacientes com história de acidente vascular encefálico (AVE), depressão primária, trauma cranioencefálico, outras demências, outras patologias neuropsiquiátricas e déficits visuo-auditivos limitantes. Os participantes foram submetidos à avaliação inicial, triagem com GDS-5 e DSM-IV, ao Questionário Internacional de Atividades Físicas (IPAQ), testes neuropsicológicos da bateria CERAD, teste do relógio, TSM (versão adaptada para o Português) e a bateria de Alzheimer do CANTAB. A análise estatística foi realizada empregando-se ANOVA, um critério, definindo-se o valor p<0,05 como significante. Houve predomínio em todos os grupos de indivíduos do gênero feminino, de cor parda, na faixa etária de 70 a 79 anos. A média de pontuação do MEEM entre os três grupos foi diferente (controle: 26,6±2,2; DCL: 25,1±2,6; DA: 17,3±4,9; p<0,05), entretanto o TSM mostrou ser uma ferramenta de triagem mais confiável para distinguir os pacientes DCL dos DA (controle: 42,4±5; DCL: 35,5±7,7; DA: 25,7±8; p<0,01). Na lista de palavras do CERAD, teste do relógio, TNBR e na fluência verbal fonológica os três grupos apresentaram diferenças significantes na média de pontos obtidos. A média da pontuação total no TSM foi significativamente menor nos grupos DCL e DA do que no grupo controle, e no grupo DA em relação ao DCL. Os testes e medidas do CANTAB que separam os três grupos pelo desempenho obtido são: RVP A‟, número de tentativas para o sucesso e total de erros na fase de 6 figuras do PAL. Foram encontradas boas correlações entre o TSM e outros testes, principalmente com o MEEM (Coeficiente de Pearson, r = 0,79; p<0,0001) e teste do relógio (r = 0,76; p<0,0001), bem como boa correlação entre as medidas do PAL e a pontuação do TSM e o MEEM. O nível de atividade física no grupo controle foi maior do que em todos os outros grupos. Ao ser correlacionado o nível de atividade física e o desempenho nos testes cognitivos, não foram observadas diferenças significativas nos diferentes grupos, exceto pela evocação de palavras no grupo DCL. Tomados em conjunto os resultados sugerem que a aplicação de testes neuropsicológicos automatizados associados aos testes da rotina clínica e ao TSM aumentam a resolução e a confiabilidade das análises particularmente no estágio inicial das síndromes demenciais onde a precocidade e a precisão diagnóstica são fundamentais para orientar as ações terapêuticas, sejam elas medicamentosas e/ou comportamentais.

Guide to Porteus maze test.

Mode of access: Internet.