Entalpía de disolución de sulfacetamida sódica en agua: comparación entre la calorimetría isoperibólica de solución y el método de van't Hoff

The dissolution enthalpy (ΔH0soln) of sodium sulfacetamide in water was determined by means of isoperibolic solution calorimetry. It was found that ΔH0soln diminishes as the drug concentration increases. Otherwise, the calorimetric values obtained as a function of the drug concentration were significantly different than those predicted by the van't Hoff method. It was demonstrated that the later is not a fully reliable method for the determination of ΔH0soln values in the specific case of highly soluble sodium salts. The observed phenomenon could be explained by the presence of strong solute-solute interactions at high salt concentrations, in addition to solute-solvent and solvent-solvent interactions.

Tecnología para el desarrollo humano: agua e infraestructura

Peer Reviewed

Energia, meio ambiente e economia: o Brasil no contexto mundial

The cycle of fossil fuels as an energy source for mankind is approaching its end. Finite resources, coupled with greenhouse gas, have led to an increased effort in the search for alternative renewable energy sources. Brazil has a leading position, due to a 46% participation of renewable sources in its primary energy supply, compared to the global average of 12%. The expansion of the renewable sources in Brazil depends on medium and long term planning, and a large volume of investments. The present financial crisis will have major effects in the energy market. Despite a negative initial impact, it is expected that the rearrangement of the financial system will ultimately lead to an expansion in the use of renewable energy sources. Brazil is a tropical country, with the largest biodiversity in our planet and excellent conditions to expand the use of all forms of renewable sources.

Fotodegradación heterogénea de bisfenol A en agua con dióxido de titanio

Bisphenol A (BPA) is a monomer used in epoxy resin and polycarbonate manufacture. This molecule is considered as an endocrine disruptor that causes different diseases. The human exposition to this non biodegrable substance is increasing in the time; in particular, water is contaminated by industrial remainder flow. In this article heterogeneous photo degradation of a solution of BPA in water solution using a catalytic photo reactor with UV light and titanium dioxide (TiO2) was evaluated. High performance liquid chromatography (HPLC) was used to analyze the photo degradation of BPA solutions. The influence of titanium dioxide amount, BPA concentration, reaction temperature and the catalyst state like suspension and immobilized were also determinated. The highest elimination of BPA was 83.2%, in 240 min, beginning with 0.05 mM of BPA and 100 mg/L of TiO2 in suspension.

Método extendido de Hildebrand en la predicción de la solubilidad del ketoprofeno en mezclas cosolventes etanol + agua

Extended Hildebrand Solubility Approach (EHSA) developed by Martin et al. was applied to evaluate the solubility of ketoprofen (KTP) in ethanol + water cosolvent mixtures at 298.15 K. Calculated values of molar volume and solubility parameter for KTP were used. A good predictive capacity of EHSA was found by using a regular polynomial model in order five to correlate the W interaction parameter and the solubility parameters of cosolvent mixtures (δmix). Nevertheless, the deviations obtained in the estimated solubilities with respect to the experimental solubilities were on the same order like those obtained directly by means of an empiric regression of the logarithmic experimental solubilities as a function of δmix values.

Heteropentámeros (etanol)4-agua: estudio estructural y termodinámico

Stochastic exploration of the potential energy surface of (ethanol)4-water heteropentamers through simulated annealing calculations was used to find probable structures of these clusters. Subsequent geometry optimization with the B3LYP/6-31+G(d) approach of these initial structures led to 13 stable heteropentamers. The strength of the hydrogen bonds of the type O"H-O (primary) and their spatial arrangements seem to be responsible for the geometric preferences and the high stability of these heteropentamers. This result is a consequence of the presence of the cooperative effects among such interactions. There is no significant influence of the secondary hydrogen bonds (C"H-O) on the stability of the heteropentamers.

Preconcentración y atomización con tubo en la llama para la determinación de Cadmio en agua de mar

A flow injection on-line pre-concentration system coupled to thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS) for cadmium determination at sub μg L-1 levels in seawater samples was developed. The on-line system was evaluated by analysing cadmium containing in a synthetic seawater matrix (2.5% m/v NaCl, 0.5% m/v MgCl2 and 0.8% m/v CaCl2). A sample volume of 2 mL allows determining Cd with a detection limits of 30 ng L-1 (3* σblank/slope), pre-concentration factor of 34 and repeatability of 1,8% (calculated as RSD, N=8 and containing 200 ng L-1 of Cd ).

Estudio del coeficiente de reparto de ácidos carboxílicos grasos en sistemas modificados heptano/agua

The use of fatty acids (FAs) as amphiphiles is very important because they have a behaving similar to surfactants. The formulation for the preferential partition of these species was studied by varying the amount of salt at constant acid concentration. As the salt concentration increases, a Winsor I→III→II transition is observed for all the systems studied. Furthermore, the electrolyte concentration required to obtain the optimum formulation varies inversely with the chain length of the acid. The partition coefficient of the surfactant allows one to obtain thermodynamic information on the acid transfer process between the phases of the system.

Hidrogeles microestructurados de acrilamida y determinación de su capacidad de absorber agua y etanol

This paper reports the synthesis of nanostructured hydrogels of acrylamide by a two-step polymerisation process. The first step is performed by inverse microemulsion polymerization (water-in-oil) of N-isopropylacrylamide (NIPA), with these particles then added to aqueous solutions of acrylamide (AM), adding a crosslinking agent. The polymerization reaction is then initiated, thereby producing nanostructured hydrogels. We determined the capacity to absorb water, water and / or ethanol when nanostructured hydrogels were immersed in aqueous solutions with different concentrations of ethanol. It was found that the hydrogels were selective in absorbing water in all cases increasing with the ethanol concentration of the solutions.

Caracterización de cristales líquidos por microscopía óptica en sistemas surfactante polietoxilado-alcano-agua

The phase behavior of an alcohol polyethoxylated surfactant with decane and dodecane oil phase varying the water proportion from 5 to 90% to determine compositions in which the formation of liquid crystals and microemulsions ocurred was investigated. Pseudoternary phase diagrams were built to represent the regions of liquid crystals, biphases and microemulsions. Polarized light optical microscopy was used for the analysis and characterization of the separate phases. The micrographs obtained showed characteristics of hexagonal and lamellar phases of liquid crystal, isotropic phases, microemulsions and vesicles. This study is important to propose hypothesis regarding the factors determining the formation and stability of phases composed by surfactant/oil/water systems.

Influencia de variables de formulación en la viscosidad de emulsiones de surfactante aniónico-aceite-agua

Phase transition and viscosity behavior of emulsified systems were studied after modifying their physicochemical formulation. Effects of concentration and nature of salts and n-alcohols, and water/oil relation on the rheological properties of emulsions were also studied. Pre-equilibrated systems were emulsified according to an agitation procedure, and the viscosity (cP) was measured at different shear rates ranging from 1 to 300 s-1. The phase behavior, as well as the emulsion type based on electrolytic conductivity, was observed. Several interpretations of the flow and viscosity curves of emulsions were made through the estimation of rheological parameters such as consistency index "k" and behavior index "n".

Modos e formas: dimensões filosóficas da crítica marxiana da economia política

O presente artigo se refere a uma parte integrante do projeto de pesquisa intitulado "A Cientificidade na Obra Marxiana de Maturidade" e pretende explicitar o estatuto categorial, determinativo, de dois dos principais conceitos que integram a crítica marxiana da economia política em sua versão madura: formas de ser e modos de produção. Tomados na linguagem corrente como praticamente sinônimos, as duas noções ganham no corpus científico-filosófico construído pela reflexão marxiana, cada qual, uma significação bastante precisa. Propomo-nos a esclarecer o conteúdo e a função teóricos cumpridos pelas duas categorias em questão, chamando a atenção para o problema da articulação categorial pensada que, em Marx, deve reproduzir, ou seja, traduzir e transpor o real na cabeça do homem. Procurar-se-á assim delimitar o efetivo sentido dos modos, histórico-sociais concretos, como modalidades de articulação de formas de ser efetivas da sociabilidade. Modos e formas de ser de entes, relações e processos sociais são momentos da determinação categorial da realidade societária. De um lado, tem-se a multiplicidade das efetivas formas de ser de relações, atividades e produtos. De outro lado, é a articulação que preside a vigência das ditas formas como existentes atualmente e parâmetro da sociabilidade como um todo.

Efeitos multiplicadores da economia florestal brasileira

Este trabalho trata da importância do setor florestal para o desenvolvimento socioeconômico brasileiro por meio dos modelos econômicos de equilíbrio geral multissetoriais, através das análises das matrizes de insumo-produto (MIP) e de contabilidade social (MCS). As principais fontes dos dados foram as Tabelas de Insumo-Produto (TIP) do Instituto Brasileiro de Geografia e Estatística (IBGE), além de informações obtidas no Banco Nacional de Desenvolvimento Econômico e Social (BNDES), no Banco Central (BACEN) e na Secretaria da Receita Federal (SRF), referentes ao ano de 1995. Observou-se que tão importante quanto contribuir para a geração e formação do PIB, de emprego, impostos, salários e balança comercial é o poder que um setor produtivo tem a mais que o outro de multiplicar estes indicadores quando uma unidade monetária é gasta a mais pelos consumidores finais na demanda por produtos deste determinado setor. Os resultados indicaram que o setor florestal é um dos setores da economia brasileira que apresentou os maiores efeitos multiplicadores para os indicadores socioeconômicos, sendo superiores aos de outros como o da indústria automobilística, de equipamentos elétricos e eletrônicos, de máquinas e equipamentos e de produtos químicos e petróleo.

Efeitos multiplicadores do setor florestal na economia capixaba

Este estudo teve por objetivo avaliar a importância do setor florestal para o desenvolvimento social e econômico do Estado do Espírito Santo, por meio dos multiplicadores de impacto nos indicadores sociais e econômicos. Analisando dados do ano de 1999, observou-se que aumentos de 10% na produção florestal são suficientes para resultar na geração de mais 1.363 empregos formais no estado, de R$9,354 milhões nas remunerações salariais, de R$77,716 milhões no Produto Interno Bruto (PIB) e de R$2 milhões na arrecadação de ICMS do estado, sendo aproximadamente 90% desses valores gerados dentro do próprio setor.

Desempenho do setor florestal para a economia brasileira: uma abordagem da matriz insumo-produto

Este trabalho teve como objetivo analisar o desempenho do setor florestal na economia brasileira, tendo como referência o ano de 2005. Foi utilizado o modelo de insumo-produto para o cálculo de multiplicadores setoriais, índices de ligações de Rasmussen-Hirschman e índices puros de ligação. Os resultados indicaram que o setor florestal foi importante para o desenvolvimento socioeconômico do Brasil em 2005, já que contribuiu para o saldo positivo da balança comercial brasileira, dada a sua participação no valor das exportações por unidade de produção. Além disso, a relevância desse setor pode ser demonstrada pelos impactos de alteração na demanda final do setor florestal sobre a produção, a arrecadação de impostos, a renda e o emprego.