The legitimation of risk and democracy: A case study of Bt cotton in Andhra Pradesh, India

This thesis explores the inter-related attempts to secure the legitimation of risk and democracy with regard to Bt cotton, a genetically modified crop, in the state of Andhra Pradesh in India. The research included nine months of ethnographic fieldwork, extensive library and newspaper research, as well as university attendance in India, undertaken between June, 2010 and March, 2011. This comparative study (involving organic, NPM and Bt cotton cultivation) was conducted in three villages in Telangana, a region which was granted secession from Andhra Pradesh in July, 2013, and in Hyderabad, the state capital. Andhra Pradesh is renowned for its agrarian crisis and farmer suicides, as well as for the conflict which Bt cotton represents. This study adopts the categories of legitimation developed by Van Leeuwen (2007; 2008) in order to explore the theory of risk society (Beck, 1992; 1994; 1999; 2009), and the Habermasian (1996: 356-366) core-periphery model as means of theoretically analysing democratic legitimacy. The legitimation of risk and democracy in relation to Bt cotton refers to normative views on the way in which power should be exercised with regard to risk differentiation, construction and definition. The analysis finds that the more legitimate the exercise of power, the lower the exposure to risk as a concern for the collective. This also has consequences for the way in which resources are distributed, knowledge constructed, and democratic praxis institutionalised as a concern for social and epistemic justice. The thesis argues that the struggle to legitimate risk and democracy has implications not only for the constitution of the new state of Telangana and the region’s development, but also for the emergence of global society and the future development of humanity as a whole.

Synthesis and characterisation of novel superficially porous silica based stationary phases for use in liquid chromatography

The concept of pellicular particles was suggested by Horváth and Lipsky over fifty years ago. The reasoning behind the idea of these particles was to improve column efficiency by shortening the pathways analyte molecules can travel, therefore reducing the effect of the A and C terms. Several types of shell particles were successfully marketed around this time, however with the introduction of high quality fully porous silica under 10 μm, shell particles faded into the background. In recent years a new generation of core shell particles have become popular within the separation science community. These particles allow fast and efficient separations that can be carried out on conventional HPLC systems. Chapter 1 of this thesis introduces the chemistry of chromatographic stationary phases, with an emphasis on silica bonded phases, particularly focusing on the current state of technology in this area. The main focus is on superficially porous silica particles as a support material for liquid chromatography. A summary of the history and development of these particles over the past few decades is explored, along with current methods of synthesis of shell particles. While commercial shell particles have a rough outer surface, Chapter 2 focuses on the novel approach to growth of smooth surface superficially porous particles in a step-by-step manner. From the Stöber methodology to the seeded growth technique, and finally to the layer-bylayer growth of the porous shell. The superficially porous particles generated in this work have an overall diameter of 2.6 μm with a 350 nm porous shell; these silica particles were characterised using SEM, TEM and BET analysis. The uniform spherical nature of the particles along with their surface area, pore size and particle size distribution are examined in this chapter. I discovered that these smooth surface shell particles can be synthesised to give comparable surface area and pore size in comparison to commercial brands. Chapter 3 deals with the bonding of the particles prepared in Chapter 2 with C18 functionality; one with a narrow and one with a wide particle size distribution. This chapter examines the chromatographic and kinetic performance of these silica stationary phases, and compares them to a commercial superficially porous silica phase with a rough outer surface. I found that the particle size distribution does not seem to be the major contributor to the improvement in efficiency. The surface morphology of the particles appears to play an important role in the packing process of these particles and influences the Van Deemter effects. Chapter 4 focuses on the functionalisation of 2.6 μm smooth surface superficially porous particles with a variety of fluorinated and phenyl silanes. The same processes were carried out on 3.0 μm fully porous silica particles to provide a comparison. All phases were accessed using elemental analysis, thermogravimetric analysis, nitrogen sorption analysis and chromatographically evaluated using the Neue test. I observed comparable results for the 2.6 μm shell pentaflurophenyl propyl silica when compared to 3.0 μm fully porous silica. Chapter 5 moves towards nano-particles, with the synthesis of sub-1 μm superficially porous particles, their characterisation and use in chromatography. The particles prepared are 750 nm in total with a 100 nm shell. All reactions and testing carried out on these 750 nm core shell particles are also carried out on 1.5 μm fully porous particles in order to give a comparative result. The 750 nm core shell particles can be synthesised quickly and are very uniform. The main drawback in their use for HPLC is the system itself due to the backpressure experienced using sub – 1 μm particles. The synthesis of modified Stöber particles is also examined in this chapter with a range of non-porous silica and shell silica from 70 nm – 750 nm being tested for use on a Langmuir – Blodgett system. These smooth surface shell particles have only been in existence since 2009. The results displayed in this thesis demonstrate how much potential smooth surface shell particles have provided more in-depth optimisation is carried out. The results on packing studies reported in this thesis aims to be a starting point for a more sophisticated methodology, which in turn can lead to greater chromatographic improvements.

Investigations into the cellular and molecular changes in the amygdala in models of temporal lobe epilepsy and maternal immune activation

The amygdala is a limbic structure that is involved in many of our emotions and processing of these emotions such as fear, anger and pleasure. Conditions such as anxiety, autism, and also epilepsy, have been linked to abnormal functioning of the amygdala, owing to improper neurodevelopment or damage. This thesis investigated the cellular and molecular changes in the amygdala in models of temporal lobe epilepsy (TLE) and maternal immune activation (MIA). The kainic acid (KA) model of temporal lobe epilepsy (TLE) was used to induce Ammon’s-horn sclerosis (AHS) and to investigate behavioural and cytoarchitectural changes that occur in the amygdala related to Neuropeptide Y1 receptor expression. Results showed that KA-injected animals showed increased anxiety-like behaviours and displayed histopathological hallmarks of AHS including CA1 ablation, granule cell dispersion, volume reduction and astrogliosis. Amygdalar volume and neuronal loss was observed in the ipsilateral nuclei which was accompanied by astrogliosis. In addition, a decrease in Y1 receptor expressing cells in the ipsilateral CA1 and CA3 sectors of the hippocampus, ipsi- and contralateral granule cell layer of the dentate gyrus and ipsilateral central nucleus of the amygdala was found, consistent with a reduction in Y1 receptor protein levels. The results suggest that plastic changes in hippocampal and/or amygdalar Y1 receptor expression may negatively impact anxiety levels. Gamma-aminobutyric acid (GABA) is the main inhibitory neurotransmitter in the brain and tight regulation and appropriate control of GABA is vital for neurochemical homeostasis. GABA transporter-1 (GAT-1) is abundantly expressed by neurones and astrocytes and plays a key role in GABA reuptake and regulation. Imbalance in GABA homeostasis has been implicated in epilepsy with GAT-1 being an attractive pharmacological target. Electron microscopy was used to examine the distribution, expression and morphology of GAT-1 expressing structures in the amygdala of the TLE model. Results suggest that GAT-1 was preferentially expressed on putative axon terminals over astrocytic processes in this TLE model. Myelin integrity was examined and results suggested that in the TLE model myelinated fibres were damaged in comparison to controls. Synaptic morphology was studied and results suggested that asymmetric (excitatory) synapses occurred more frequently than symmetric (inhibitory) synapses in the TLE model in comparison to controls. This study illustrated that the amygdala undergoes ultrastructural alterations in this TLE model. Maternal immune activation (MIA) is a risk factor for neurodevelopmental disorders such as autism, schizophrenia and also epilepsy. MIA was induced at a critical window of amygdalar development at E12 using bacterial mimetic lipopolysaccharide (LPS). Results showed that MIA activates cytokine, toll-like receptor and chemokine expression in the fetal brain that is prolonged in the postnatal amygdala. Inflammation elicited by MIA may prime the fetal brain for alterations seen in the glial environment and this in turn have deleterious effects on neuronal populations as seen in the amygdala at P14. These findings may suggest that MIA induced during amygdalar development may predispose offspring to amygdalar related disorders such as heightened anxiety, fear impairment and also neurodevelopmental disorders.

EMG Biofeedback Videogame System for the Gait Rehabilitation of Hemiparetic Individuals

Gemstone Team CHIP

Archaeological Excavations at 18AP14: The Victualling Warehouse Site, 77 Main Street, Annapolis, Maryland, 1982 - 1984

The Victualling Warehouse Site, located at 77 Main Street in Annapolis, Maryland, was excavated by Archaeology in Annapolis during the summers of 1982 and 1983 and the fall of 1984. Funding was provided by Historic Annapolis, Incorporated (now Historic Annapolis Foundation), the University of Maryland, the Maryland Committee for the Humanities, and the Maryland Commission on the Capital City. This site has been used for commercial and residential purposes since the 1740's. During the Revolution the warehouses were used as a victualling office to supply American troops. A fire in 1970 destroyed these buildings and the present structure, also used as a store, was built about twenty years later. Over the three years of excavation, a total of 36 5 foot by 5 foot units were excavated revealing several features, including the foundations of one of the eighteenth century warehouses.

Podcasting - delivering learning to the iTunes generation

The Guardian newspaper (21st October 2005) informed its readers that: "Stanford University in California is to make its course content available on iTunes...The service, Stanford on iTunes, will provide…downloads of faculty lectures, campus events, performances, book readings, music recorded by Stanford students and even podcasts of Stanford football games". The emergence of Podcasting as means of sending audio data to users has clearly excited educational technologists around the world. This paper will explore the technologies behind Podcasting and how this could be used to develop and deliver new E-Learning material. The paper refers to the work done to create Podcasts of lectures for University of Greenwich students.

The use of fluorescence microscopy to define polymer localisation to the late endocytic compartments in cells that are targets for drug delivery

Macromolecular therapeutics and nano-sized drug delivery systems often require localisation to specific intracellular compartments. In particular, efficient endosomal escape, retrograde trafficking, or late endocytic/lysosomal activation are often prerequisites for pharmacological activity. The aim of this study was to define a fluorescence microscopy technique able to confirm the localisation of water-soluble polymeric carriers to late endocytic intracellular compartments. Three polymeric carriers of different molecular weight and character were studied: dextrin (Mw~50,000 g/mol), a N-(2-hydroxypropyl)methacrylamide (HPMA) copolymer (Mw approximately 35,000 g/mol) and polyethylene glycol (PEG) (Mw 5000 g/mol). They were labelled with Oregon Green (OG) (0.3-3 wt.%; <3% free OG in respect of total). A panel of relevant target cells were used: THP-1, ARPE-19, and MCF-7 cells, and primary bovine chondrocytes (currently being used to evaluate novel polymer therapeutics) as well as NRK and Vero cells as reference controls. Specific intracellular compartments were marked using either endocytosed physiological standards, Marine Blue (MB) or Texas-red (TxR)-Wheat germ agglutinin (WGA), TxR-Bovine Serum Albumin (BSA), TxR-dextran, ricin holotoxin, C6-7-nitro-2,1,3-benzoxadiazol-4-yl (NBD)-labelled ceramide and TxR-shiga toxin B chain, or post-fixation immuno-staining for early endosomal antigen 1 (EEA1), lysosomal-associated membrane proteins (LAMP-1, Lgp-120 or CD63) or the Golgi marker GM130. Co-localisation with polymer-OG conjugates confirmed transfer to discreet, late endocytic (including lysosomal) compartments in all cells types. The technique described here is a particularly powerful tool as it circumvents fixation artefacts ensuring the retention of water-soluble polymers within the vesicles they occupy.

Achiral, selective CCK2 receptor antagonists based on a 1,3,5-benzotriazepine-2,4-dione template

Novel, achiral 1H-1,3,5-benzotriazepine-2,4(3H,5H)-diones have been prepared and structurally characterized. These compounds are potent CCK2 receptor antagonists that display a high degree of selectivity over CCK1 receptors.

Contributions to the bryological flora of the tropical and subtropical forests from the Argentina (Bryophyta, Musci).

The authors present here a list of 32 mosses belonging to 15 families: Brachytheciaceae, Cryphaeaceae, Entodontaceae, Hedwigiaceae, Hypnaceae, Leptodontaceae, Meteoriaceae, Neckeraceae, Pilotrichaceae, Polytrichaceae, Pterobryaceae, Racopilaceae, Rigodiaceae, Stereophyllaceae, and Trachypodaceae, all collected in the mountainous forests of the Yungas of the NW of the Argentina (Jujuy, Salta, Catamarca and Tucumán provinces), and also in the rainforests from the NE of the country (Misiones province). Eight species: Atrichum polycarpum, Chrysohypnum elegantulum, Pilosium chlorophyllum, Pilotrichella flexilis, Porotrichodendron lindigii, Pseudotrachypus martinicensis, Steerecleus scariosus, and Thamnobryum fasciculatum are new records for the bryologic flora from Argentina. Braunia imberbis and Squamidium brasiliense are two new records for the bryophytic flora of the Catamarca province; Porotrichodendron superbum is new for the Salta province, while Forsstroemia coronata is the first record for the Catamarca and Jujuy provinces. Aerolindigia capillacea, Braunia reflexifolia, Chryso-hypnum diminutivum, Meteorium deppei and Meteoridium remotifolium are five new citations for the Jujuy province, and Schoenobryum concavifolium is new for the bryophytic flora of the Misiones province. Many studied species occur more frequently in the Yungas than in the NE rainforests; others show separated distribution but live in both areas, the Yungas and Paranaense area, and others are more or less restricted to the Paranaense rainforest of the NE of Argentina. The taxonomy of species is updated, and comments are included on bibliographical precedents, ecology and chorology of each taxon.

Integrating Aircraft Cost Modelling into Conceptual Design

The article presents cost modeling results from the application of the Genetic-Causal cost modeling principle. Industrial results from redesign are also presented to verify the opportunity for early concept cost optimization by using Genetic-Causal cost drivers to guide the conceptual design process for structural assemblies. The acquisition cost is considered through the modeling of the recurring unit cost and non-recurring design cost. The operational cost is modeled relative to acquisition cost and fuel burn for predominately metal or composites designs. The main contribution of this study is the application of the Genetic-Causal principle to the modeling of cost, helping to understand how conceptual design parameters impact on cost, and linking that to customer requirements and life cycle cost.

Modelling of aircraft manufacturing cost at the concept stage

The work presented is concerned with the estimation of manufacturing cost at the concept design stage, when little technical information is readily available. The work focuses on the nose cowl sections of a wide range of engine nacelles built at Bombardier Aerospace Shorts of Belfast. A core methodology is presented that: defines manufacturing cost elements that are prominent; utilises technical parameters that are highly influential in generating those costs; establishes the linkage between these two; and builds the associated cost estimating relations into models. The methodology is readily adapted to deal with both the early and more mature conceptual design phases, which thereby highlights the generic, flexible and fundamental nature of the method. The early concept cost model simplifies cost as a cumulative element that can be estimated using higher level complexity ratings, while the mature concept cost model breaks manufacturing cost down into a number of constituents that are each driven by their own specific drivers. Both methodologies have an average error of less that ten percent when correlated with actual findings, thus achieving an acceptable level of accuracy. By way of validity and application, the research is firmly based on industrial case studies and practice and addresses the integration of design and manufacture through cost. The main contribution of the paper is the cost modelling methodology. The elemental modelling of the cost breakdown structure through materials, part fabrication, assembly and their associated drivers is relevant to the analytical design procedure, as it utilises design definition and complexity that is understood by engineers.