Dynamical behavior of damped driven coupled single electron simple harmonic oscillators

Coherent coupling between a large number of qubits is the goal for scalable approaches to solid state quantum information processing. Prototype systems can be characterized by spectroscopic techniques. Here, we use pulsed-continuous wave microwave spectroscopy to study the behavior of electrons trapped at defects within the gate dielectric of a sol-gel-based high-k silicon MOSFET. Disorder leads to a wide distribution in trap properties, allowing more than 1000 traps to be individually addressed in a single transistor within the accessible frequency domain. Their dynamical behavior is explored by pulsing the microwave excitation over a range of times comparable to the phase coherence time and the lifetime of the electron in the trap. Trap occupancy is limited to a single electron, which can be manipulated by resonant microwave excitation and the resulting change in trap occupancy is detected by the change in the channel current of the transistor. The trap behavior is described by a classical damped driven simple harmonic oscillator model, with the phase coherence, lifetime and coupling strength parameters derived from a continuous wave (CW) measurement only. For pulse times shorter than the phase coherence time, the energy exchange between traps, due to the coupling, strongly modulates the observed drain current change. This effect could be exploited for 2-qubit gate operation. The very large number of resonances observed in this system would allow a complex multi-qubit quantum mechanical circuit to be realized by this mechanism using only a single transistor.

Numerical analysis of the coupled circuit and cooling holes for an electromagnetic shaker

This paper presents a time-stepping shaker modeling scheme. The new method improves the accuracy of analysis of armature-position-dependent inductances and force factors, analysis of axial variation of current density in copper plates (short-circuited turns), and analysis of cooling holes in the magnetic circuit. Linear movement modeling allows armature position to be precisely included in the shaker analysis. A more accurate calculation of eddy currents in the coupled circuit is in particular crucial for the shaker analysis in a mid-or high-frequency operation range. Large currents in a shaker, including eddy currents, incur large Joule losses, which in turn require the use of a cooling system to keep temperature at bay. Sizable cooling holes have influence on the saturation state of iron poles, and hence have to be properly taken into account.

Poverty in the fisheries, inductors, causes and intervention

The study is prompted by the poverty that persisted among the fishing communities of lake victoria at time of considerable cash inflow into the fisheries development of fish processing industry. There has been need for understanding of the poverty and what strategies would be most appreciate for it's reduction.This study has attempted to respond to the needby identifying the nature and distribution of the poverty within the fisheries lake victoria,Uganda, the factor responsible for itand the options for poverty reduction intervention. The study examined the global and regional perspectives of poverty and wealth distribution, noting that wide disparities existed between the developed and the developing world and also between the developing countries themselves. A historical review of development policies and strategies revealed that while successive strategies were able to contribute to growth, their achievement towards poverty alleviation were less than satisfactory, hence the need for continually developing new strategies. A background to Uganda’s society and economy is provided, examining the demographic, political, environmental and economic conditions of the country. Uganda’s development strategies are reviewed, highlighting the role of the Poverty Eradication Action Plan, Uganda’s main strategy for implementing the policy of poverty reduction and wealth distribution. At the agricultural sector level, the Plan for the Modernisation of Agriculture has been formulated, followed by the National Fisheries Policy, aimed at providing a policy framework for the management and development of the fisheries. An appropriate definition of poverty was formulated, considered relevant to the situation of Lake Victoria. The dimensions of poverty included inadequate basic necessities, low education and health achievements, a sense of insecurity and exposure to risk. The research methodology was enhanced by the examination of the Lélé Model of the Poverty–Environmental Degradation problem, the World Bank Model of Poverty Causation and the subsequent Lake Victoria Model developed in this study. It has provided a plan for the research, the consideration of criteria and a data collection plan. The data collection instruments included secondary data search, key informant interviews and a sample survey based on a structured questionnaire. The study identified all the four dimensions of poverty in the fisheries, provided poverty profiles with respect to the different activities, groups of people and regions in the fisheries, based on consumption poverty. Among the people identified to be in poverty were the fishing labourers, fishers of Oreochromis niloticus and those operating with non-powered boats. In the post-harvest fisheries, large proportions of processors involved in salting and sun-drying, market stall and bicycle traders were in the poverty category. The ethnic groups most affected included the Samia, Basoga and Bakenye while the Districts of Jinja, Bugiri and Busia had the highest proportions of fishers in the poverty category. With respect to the other dimensions of poverty, the study showed that educational achievement was low within the fishing communities. The health status was poor, due mainly to the prevalence of malaria, diarrhoea, bilharzia and HIV/AIDS. There was a sense of insecurity within certain sections of the fishing community, due to leadership weaknesses within the local as well as the Government institutions. Some community members operated in a state of risk because they were vulnerable to episodes of income, health and education. The causes of poverty in fisheries included weaknesses within the institutional and social environment, limitations in the technology available to the poor, resource degradation and unfavourable economic factors. The recommendations of the study for poverty reduction included strengthening of policies, developing links, improving capacities and increasing resources, to be applied at the levels of Central Government, Local Government and of the community. In view of the achievements of the methodology used on this study, involving reference to the models, it is recommended that future research should build upon this model approach, as it will continue to produce results, especially when attempting to forecast changes relating to interventions.

A comparison of methods for the coupled analysis of floating structures

The dynamic analysis of a deepwater floating platform and the associated mooring/riser system should ideally be fully coupled to ensure a reliable response prediction. It is generally held that a time domain analysis is the only means of capturing the various coupling and nonlinear effects accurately. However, in recent work it has been found that for an ultra-deepwater floating system (2000m water depth), the highly efficient frequency domain approach can provide highly accurate response predictions. One reason for this is the accuracy of the drag linearization procedure over both first and second order motions, another reason is the minimal geometric nonlinearity displayed by the mooring lines in deepwater. In this paper, the aim is to develop an efficient analysis method for intermediate water depths, where both mooring/vessel coupling and geometric nonlinearity are of importance. It is found that the standard frequency domain approach is not so accurate for this case and two alternative methods are investigated. In the first, an enhanced frequency domain approach is adopted, in which line nonlinearities are linearized in a systematic way. In the second, a hybrid approach is adopted in which the low frequency motion is solved in the time domain while the high frequency motion is solved in the frequency domain; the two analyses are coupled by the fact that (i) the low frequency motion affects the mooring line geometry for the high frequency motion, and (ii) the high frequency motion affects the drag forces which damp the low frequency motion. The accuracy and efficiency of each of the methods are systematically compared. Copyright © 2007 by ASME.

Molecular evolution of CXCR1, a G protein-coupled receptor involved in signal transduction of neutrophils

Human neutrophils are a type of white blood cell, which forms an early line of defense against bacterial infections. Neutrophils are highly responsive to the chemokine, interleukin-8 (IL-8) due to the abundant distribution of CXCR1, one of the IL-8 receptors on the neutrophil cell surface. As a member of the GPCR family, CXCR1 plays a crucial role in the IL-8 signal transduction pathway in neutrophils. We sequenced the complete coding region of the CXCR1 gene in worldwide human populations and five representative nonhuman primate species. Our results indicate accelerated protein evolution in the human lineage, which was likely caused by Darwinian positive selection. The sliding window analysis and the codon-based neutrality test identified signatures of positive selection at the N-terminal ligand/receptor recognition domain of human CXCR1.

Coupled foundation-superstructure analysis and influence of building stiffness on foundation response

This paper proposes a simple method to include superstructure stiffness in foundation analyses. The method involves extracting a small "condensed structural matrix" from finite element models of the superstructure, which can then be incorporated into pile group or piled raft analyses using common approaches such as elastic continuum or load transfer methods. The matrix condensation method directly couples structural and geotechnical analyses, and eliminates the need for iterative analyses between structural and geotechnical engineers. Effectiveness of the approach is illustrated through analyses of several buildings designed with a typical floor plan but with varying heights. The parametric study illustrates that superstructure stiffness can have a significant influence on foundation settlement estimates, and the stiffening effects are dominated by the lower stories of the superstructure. The proposed method aims to bridge the gap between structural and geotechnical analyses. Also, being a computationally simple and accurate approach, it is applicable to parametric or optimization studies that would otherwise involve large amounts of analyses. © 2010 ASCE.

Generation of conjugate meshes for complex geometries for coupled multi-physics simulations

Over recent years we have developed and published research aimed at producing a meshing, geometry editing and simulation system capable of handling large scale, real world applications and implemented in an end-to-end parallel, scalable manner. The particular focus of this paper is the extension of this meshing system to include conjugate meshes for multi-physics simulations. Two contrasting applications are presented: export of a body-conformal mesh to drive a commercial, third-party simulation system; and direct use of the cut-Cartesian octree mesh with a single, integrated, close-coupled multi-physics simulation system. Copyright © 2010 by W.N.Dawes.

Shock transmission and eigenvalue veering within a coupled system.

The operation of dynamical systems in harsh environments requires continuous monitoring. Internal sensors may be used to monitor the conditions in real time. A typical example is the sensor and electronic components used in space structures which, especially during launch, are subject to huge g force. The paper will present an experimental and theoretical study on a simplified model used to analyze the possible cause of high acceleration on the enclosed sensors and equipments due to impulsive loading. The model system consists of two beams coupled using compliant connections. An impulse hammer excites one beam, and vibrations are transmitted to the indirectly driven beam. A theoretical model is developed using a Rayleigh-Ritz approach and validated using experimental results in both the frequency and time domains. Monto Carlo simulation was done with random masses positioned on the indirectly driven beam to determine the worst-case conditions for maximum peak acceleration. Highest acceleration levels were found when mode matching in the two beams led to veering behavior in the coupled modes. The results suggest guidelines for the detailed design of internal components of a structure exposed to shock loading from its environment. [The authors thank Schlumberger Cambridge Research for financial support.].

A hierarchical approach coupled with coarse DEM information for improving the efficiency and accuracy of forest mapping over very rugged terrains

Forest mapping over mountainous terrains is difficult because of high relief Although digital elevation models (DEMs) are often useful to improve mapping accuracy, high quality DEMs are seldom available over large areas, especially in developing countries

Synchronization in a pair of thermally coupled rotating baroclinic annuli: understanding atmospheric teleconnections in the laboratory.

Synchronization phenomena in a fluid dynamical analogue of atmospheric circulation is studied experimentally by investigating the dynamics of a pair of thermally coupled, rotating baroclinic annulus systems. The coupling between the systems is in the well-known master-slave configuration in both periodic and chaotic regimes. Synchronization tools such as phase dynamics analysis are used to study the dynamics of the coupled system and demonstrate phase synchronization and imperfect phase synchronization, depending upon the coupling strength and parameter mismatch.