Estudo dos solos da região metropolitana de Fortaleza para aplicação na engenharia rodoviária

O trabalho aqui apresentado é resultado de uma pesquisa onde se procurou caracterizar os solos da Região Metropolitana de Fortaleza (RMF). Inicialmente, o objetivo deixou de ser principal devido às limitações desse método quando aplicado aos solos da RMF. O objetivo principal do trabalho passou a ser estudar mais detalhadamente os solos que ocorrem na Região Metropolitana de Fortaleza à luz de métodos convencionais e não convencionais, para aplicação na engenharia rodoviária. Para tanto, foram estudados sessenta solos pertencentes às classes pedológicas que ocorrem na RMF. Esses solos foram submetidos a um programa experimental que envolveu a execução de ensaios \"convencionais\" e \"não convencionais\". A partir dos resultados experimentais foram estabelecidas correlações entre os valores de algumas propriedades de interesse à pavimentação realizadas em cilindro convencional e miniatura. Tentou-se determinar o valor de CBR de um solo, dispondo das cargas calculadas no ensaio mini-CBR, mas essa tarefa não logrou êxito. As amostras foram classificadas pelas classificações HBR e MCT para verificação da qualidade da previsão das propriedades dos solos obtidas por esses métodos e aqueles resultantes da execução dos ensaios de laboratório. Foi proposto, a partir da execução de ensaio de adsorção de azul de metileno, a inclusão no ábaco de três zonas para se caracterizar o comportamento dos solos da RMF. Os resultados experimentais permitiram, também, concluir que pode-se identificar os materiais com potencial de uso na pavimentação de sua classe pedológica.

Ocorrência e caracterização de Giardia e Cryptosporidium em águas captadas para abastecimento público no município de Cajamar-SP e avaliação do risco

Introdução: O risco à saúde humana ocasionado pela contaminação biológica de águas captadas para abastecimento público é realçado pela ocorrência de surtos de doenças associadas aos protozoários Giardia e Cryptosporidium, que possuem baixas doses infecciosas e alta capacidade de sobrevivência no ambiente, além de serem capazes de resistir ao processo tradicional de desinfecção da água (cloração). Partindo-se da hipótese de que há um risco elevado de infecção por estes protozoários pela ingestão de água tratada por métodos convencionais e que fazem uso de mananciais superficiais impactados por contaminação biológica, resultando num possível incremento da incidência de diarréias, este estudo se propôs a verificar a ocorrência destes protozoários em águas captadas para abastecimento público no município de Cajamar-SP, caracterizar sua patogenicidade e avaliar o risco associado ao seu consumo através da água tratada. Métodos: Foram coletadas 48 amostras do ribeirão dos Cristais no ponto de captação da estação de tratamento de água, semanalmente, durante 12 meses (de 16/05/2013 a 21/05/2014). A detecção e a análise da concentração dos protozoários foram realizadas de acordo com Método 1623.1 da United States Environmental Protection Agency e a extração e caracterização dos espécies/genótipos de Giardia e Cryptosporidium foi realizada através metodologias moleculares e seqüenciamento. O risco de infecção pela ingestão de cistos de Giardia e oocistos de Cryptosporidium presentes na água tratada foi calculado usando a ferramenta da Avaliação Quantitativa do Risco Microbiológico, a partir dos dados de concentração dos patógenos obtidos pelo Método 1623.1, eficiência de remoção dos (oo)cistos durante o processo convencional de tratamento da água, modelo dose-resposta e taxa de ingestão diária de água para indivíduos menores de 5 anos e maiores de 21 anos. Resultados: Cistos de Giardia foram detectados em 83,3% das amostras (40/48), com concentrações variando desde o limite de detecção (<0,1) até 8,6 cistos/L. Oocistos de Cryptosporidium foram etectados em 37,5% das amostras (18/48), com concentrações variando desde o limite de detecção (<0,1) até 2 oocistos/L. As espécies/genótipos encontrados (Giardia intestinalis A e B e Cryptosporidium parvum e hominis) são característicos de contaminação antrópica e são frequentemente identificados em estudos epidemiológicos como responsáveis por surtos. A estimativa do risco anual de infecção por Giardia foi de 3,3x10-3 (IC95% 4,6x10-3) para crianças e de 11,5x10-3 (IC95% 13,3x10-3) para adultos, enquanto o risco por Cryptosporidium foi de 1,1x10-3 (IC95% 1,7x10-3) para crianças e de 3,9x10-3 (IC95% 5,0x10-3) para adultos. O incremento da incidência de diarréias foi observado no cenário de estudo após um acidente que resultou em transbordamento de esgotos não tratados no manancial, coincidindo com o aumento na detecção de (oo)cistos. Conclusão: Os resultados evidenciaram que a vulnerabilidade do ribeirão dos Cristais a contaminações biológicas pode culminar em um risco elevado de infecção e adoecimento por Giardia e Cryptosporidium através da ingestão de água tratada. Portanto, o caso é preocupante, tanto do ponto de vista do tratamento e abastecimento de água potável, quanto da degradação e contaminação do manancial, evidenciando a necessidade de se estabelecer medidas de intervenção direcionadas a promover a qualidade da água e garantir sua segurança

Stabilisation of low softening point petroleum pitch fibres by HNO3

This paper deals with the stabilisation of low softening point pitch fibres obtained from petroleum pitches using HNO3 as oxidising agent. This method presents some advantages compared with conventional methods: pitches with low softening point (SP) can be used to prepare carbon fibres (CF), the stabilisation time has been reduced, the CF yields are similar to those obtained after general methods of stabilisation, and the initial treatments to increase SP when low SP pitches are used to prepare CF, are avoided. The parent pitches were characterised by different techniques such as diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), elemental analysis and solvent extraction with toluene and quinoline. The interaction between HNO3 and the pitch fibres, as well as the changes occurring during the heat treatment, have been followed by DRIFTS.

Stabilisation of low softening point petroleum pitch fibres by iodine treatment

A method using iodine has been developed for the stabilisation of low softening point (SP) pitch fibres that avoids air stabilisation in the production of carbon fibres (CF). The interaction between iodine and petroleum pitches has been studied by following the changes in the hydrogen content, aromatic or aliphatic, during the heat treatment of iodine-treated pitch fibres. Two low SP petroleum pitches were used and the iodine-treated pitch fibres were analysed by TGA, DSC, DRIFT, XPS and SEM. The results confirm that using this novel method pitches with low SP can be used to prepare CF with two advantages, compared with conventional methods. The stabilisation time is considerably reduced and treatments to increase the SP, usually required when low SP pitches are used to prepare CF, can be avoided.

Ion balance in waters through inductively coupled plasma optical emission spectrometry

Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) has been employed to carry out the determination of both major anions and cations in water samples. The anion quantification has been performed by means of a new automatic accessory. In this device chloride has been determined by continuously adding a silver nitrate solution. As a result solid silver chloride particles are formed and retained on a nylon filter inserted in the line. The emission intensity is read at a silver characteristic wavelength. By plotting the drop in silver signal versus the chloride concentration, a straight line is obtained. As regards bicarbonate, this anion has been on-line transformed into carbon dioxide with the help of a 2.0 mol L−1 nitric acid stream. Carbon signal is linearly related with bicarbonate concentration. Finally, information about sulfate concentration has been achieved by means of the measurement of sulfur emission intensity. All the steps have been simultaneously and automatically performed. With this setup detection limits have been 1.0, 0.4 and 0.09 mg L−1 for chloride, bicarbonate and sulfate, respectively. Furthermore, it affords good precision with RSD below 6 %. Cation (Ca, Mg, Na and K) concentration, in turn, has been obtained by simultaneously reading the emission intensity at characteristic wavelengths. The obtained limits of detection have been 8 × 10−3, 2 × 10−3, 8 × 10−4 and 10−2 mg L−1 for sodium, potassium, magnesium and calcium, respectively. As regards sample throughput, about 30 samples h−1 can be analysed. Validation results have revealed that the obtained concentrations for these anions are not significantly different as compared to the data provided by conventional methods. Finally, by considering the data for anions and cations, precise ion balances have been obtained for well and mineral water samples.

Towards Accurate and Efficient Description of Excited States

Thesis (Ph.D.)--University of Washington, 2016-06

A PCR method for the identification of methicillin-resistant Staphylococcus aureus (MRSA) from screening swabs

Aim: The aim of this study was to assess the discriminatory power and potential turn around time ( TAT) of a PCR-based method for the detection of methicillin-resistant Staphylococcus aureus (MRSA) from screening swabs. Methods: Screening swabs were examined using the current laboratory protocol of direct culture on mannitol salt agar supplemented with oxacillin (MSAO-direct). The PCR method involved pre-incubation in broth for 4 hours followed by a multiplex PCR with primers directed to mecA and nuc genes of MRSA. The reference standard was determined by pre-incubation in broth for 4 hours followed by culture on MSAO (MSAO-broth). Results: A total of 256 swabs was analysed. The rates of detection of MRSA using MSAO-direct, MSAO-broth and PCR were 10.2, 13.3 and 10.2%, respectively. For PCR, the sensitivity, specificity, positive predictive value and negative predictive values were 66.7% (95% CI 51.9 - 83.3%), 98.6% ( 95% CI 97.1 - 100%), 84.6% ( 95% CI 76.2 - 100%) and 95.2% ( 95% CI 92.4 - 98.0%), respectively, and these results were almost identical to those obtained from MSAO-direct. The agreement between MSAO-direct and PCR was 61.5% ( 95% CI 42.8 - 80.2%) for positive results, 95.6% ( 95% CI 93.0 - 98.2%) for negative results and overall was 92.2% ( 95% CI 88.9 - 95.5%). Conclusions: ( 1) The discriminatory power of PCR and MSAO-direct is similar but the level of agreement, especially for true positive results, is low. ( 2) The potential TAT for the PCR method provides a marked advantage over conventional methods. ( 3) Further modifications to the PCR method such as increased broth incubation time, use of selective broth and adaptation to real-time PCR may lead to improvement in sensitivity and TAT.

Stickiness measurement techniques for food powders: a review

The importance of sticky behaviour of amorphous food powders has been recognized over many decades in the food industry due to its influence on process and handling abilities and quality of the powders. This paper emphasizes the role of stickiness in the food powder industry as well as reviews the stickiness characterization techniques developed to date. This paper also attempts to correlate the stickiness behaviour of food powders to the instrumental analysis such as glass transition temperature. (C) 2004 Elsevier B.V All rights reserved.

Local liquid holdups and hysteresis in a 2-D packed bed using X-ray radiography

An X-ray visualization technique has been used for the quantitative determination of local liquid holdups distribution and liquid holdup hysteresis in a nonwetting two-dimensional (2-D) packed bed. A medical diagnostic X-ray unit has been used to image the local holdups in a 2-D cold model having a random packing of expanded polystyrene beads. An aqueous barium chloride solution was used as a fluid to achieve good contrast on X-ray images. To quantify the local liquid holdup, a simple calibration technique has been developed that can be used for most of the radiological methods such as gamma ray and neutron radiography. The global value of total liquid holdup, obtained by X-ray method, has been compared with two conventional methods: drainage and tracer response. The X-ray technique, after validation, has been used to visualize and quantify, the liquid hysteresis phenomena in a packed bed. The liquid flows in preferred paths or channels that carry droplets/rivulets of increasing size and number as the liquid flow rate is increased. When the flow is reduced, these paths are retained and the higher liquid holdup that persists in these regions leads to the holdup hysteresis effect. Holdup in some regions of the packed bed may be an order of magnitude higher than average at a particular flow rate. (c) 2005 American Institute of Chemical Engineers

Use of the Vector (TM) scaling unit in supportive periodontal therapy: a subjective patient evaluation

Background: Patient discomfort is one reason for poor compliance with supportive periodontal therapy (SPT). The aim of this study was to compare the levels of discomfort during SPT, using the Vector (TM) system and treatment with a conventional ultrasonic scaler. Methods: Forty-six patients with an SPT programme were debrided using both the Vector (TM) system and a conventional piezo-electric scaler (Sirona (TM)) in a split mouth design. A visual analogue scale was used to evaluate of pain scores upon completion of treatment. A verbal response scale(VRS) was used to assess discomfort, vibration and noise associated with the scaling system, as well as the volume and taste of the coolant used by these systems. Results: Patients instrumented with the Vector (TM) system experienced approximately half the amount of pain compared with the conventional ultrasonic scaling system. The VRS showed that the Vector (TM) system caused less discomfort than the conventional ultrasonic scaling system when assessed for pain, vibration, noise and volume of coolant. These findings were all statistically significant. There was, however, no statistically significant difference between the two systems when assessed for taste. Conclusion: During SPT the Vector (TM) system caused reduced discomforting sensations compared with conventional methods and may be useful in improving compliance with SPT programmes.

The combined SPE : ToxY-PAM phytotoxicity assay; application and appraisal of a novel biomonitoring tool for the aquatic environment

Mounting concerns regarding the environmental impact of herbicides has meant a growing requirement for accurate, timely information regarding herbicide residue contamination of, in particular, aquatic systems. Conventional methods of detection remain limited in terms of practicality due to high costs of operation and the specialised information that analysis provides. A new phytotoxicity bioassay was trialled for the detection of herbicide residues in filter-purified (Milli-Q) as well as natural waters. The performance of the system, which combines solid-phase extraction (SPE) with the ToxY-PAM dual-channel yield analyser (Heinz Walz GmbH), was tested alongside the traditional method of liquid chromatography-mass spectrometry (LC-MS). The assay methodology was found to be highly sensitive (LOD 0.1 ng L-1 diuron) with good reproducibility. The study showed that the assay protocol is time effective and can be employed for the aquatic screening of herbicide residues in purified as well as natural waters.

Application of nox-restriction fragment length polymorphism for the differentiation of Brachyspira intestinal spirochetes isolated from pigs and poultry in Australia

Sixty-nine intestinal spirochetes isolated from pigs and poultry in eastern Australia were selected to evaluate the effectiveness of a species-specific PCR-based restriction fragment length polymorphism (RFLP) analysis of the Brachyspira nox gene. For comparative purposes, all isolates were subjected to species-specific PCRs for the pathogenic species Brachyspira hyodysenteriae and Brachyspira pilosicoli, and selected isolates were examined further by sequence analysis of the nox and 16S ribosomal RNA genes. Modifications to the original nox-RFLP method included direct inoculation of bacterial cells into the amplification mixture and purification of the PCR product, which further optimized the nox-RFLP for use in a veterinary diagnostic laboratory, producing sufficient product for both species identification and future comparisons. Although some novel profiles that prevented definitive identification were observed, the nox-RFLP method successfully classified 45 of 51 (88%) porcine and 15 of 18 (83%) avian isolates into 5 of the 6 recognized species of Brachyspira. This protocol represents a significant improvement over conventional methods currently used in veterinary diagnostic laboratories for rapid specific identification of Brachyspira spp. isolated from both pigs and poultry.

New concepts for distinguishing the hidden patterns of linkage disequilibrium which underlie association between genotypes and complex phenotypes

A disappointing feature of conventional methods for detecting association between DNA variation and a phenotype of interest is that they tell us little about the hidden pattern of linkage disequilibrium (LD) with the functional variant that is actually responsible for the association. This limitation applies to case-control studies and also to the transmission/disequilibrium test (TDT) and other family-based association methods. Here we present a fresh perspective on genetic association based on two novel concepts called 'LD squares' and 'equi-risk alleles'. These describe and characterize the different patterns of gametic LD which underlie genetic association. These concepts lead to a general principle - the Equi-Risk Allele Segregation Principle - which captures the way in which underlying LD patterns affect the transmission patterns of genetic variants associated with a phenotype. This provides a basis for distinguishing the hidden LD patterns and might help to locate the functional variants responsible for the association.

Surgical correction of astigmatism during cataract surgery

High levels of corneal astigmatism are prevalent in a significant proportion of the population. During cataract surgery pre-existing astigmatism can be corrected using single or paired incisions on the steep axis of the cornea, using relaxing incisions or with the use of a toric intraocular lens. This review provides an overview of the conventional methods of astigmatic correction during cataract surgery and in particular, discusses the various types of toric lenses presently available and the techniques used in determining the correct axis for the placement of such lenses. Furthermore, the potential causes of rotation in toric lenses are identified, along with techniques for assessing and quantifying the amount of rotation and subsequent management options for addressing post-operative rotation.

Chemical and physical characterization of clay bodies

Suitable methods for the assessment of the effect of freeze-thaw action upon ceramic tiles have been determined. The results obtained have been shown to be reproducible with some work in this area still warranted. The analysis of Whichford Potteries clays via a variety of analytical techniques has shown them to be a complex mix of both clay and non-clay minerals. 57Fe Mössbauer spectroscopy has highlighted the presence of both small and large particleα-Fe203, removable via acid washing. 19F MAS NMR has demonstrated that the raw Whichford Pottery clays examined have negligible fluorine content. This is unlikely to be detrimental to ceramic wares during the heating process. A unique technique was used for the identification of fluorine in solid-state systems. The exchange of various cations into Wyoming Bentonite clay by microwave methodology did not show the appearance of five co-ordinate aluminium when examined by 27Al MAS NMR. The appearance of Qo silicate was linked to an increase in the amount of tetrahedrally bound aluminium in the silicate framework. This is formed as a result of the heating process. The analysis of two Chinese clays and two Chinese clay raw materials has highlighted a possible link between the two. These have also been shown to be a mix of both clay and non-clay minerals. Layered double hydroxides formed by conventional and microwave methods exhibited interesting characteristics. The main differences between the samples examined were not found to be solely attributable to the differences between microwave and conventional methods but more attributable to different experimental conditions used.