Food availability, cost disparity and improvement in relation to accessibility and remoteness in Queensland

This study is the first to describe disparity and change in the food supply between metropolitan, rural and remote stores by Accessibility/Remoteness Index of Australia (ARIA)1 category. A total of 92 stores (97% response rate) within five aggregate ARIA categories participated throughout Queensland in 2000. There was a strong association between ARIA category and the cost of the basket of basic foods, with prices being significantly higher (20% and 31% respectively) in the ‘remote’ and ‘very remote’ categories than in the ‘highly accessible’ category. The association with ARIA was less marked for fruit and vegetables than for other food groups, but not for tobacco and take-away food items. Basic food items were less available in the more remote stores. Over the past two years, relative improvements in food prices have been seen in stores in the ‘very remote’ category, with observed increases less than the consumer price index (CPI) for food. Some factors which may have contributed to this improvement are discussed.

Review of the nutrition policy of the Arnhem Land Progress Association

The process of implementation and the effect of the nutrition policy of the Arnhem Land Progress Association (ALPA) were reviewed three years after implementation of the policy in five remote Aboriginal community retail stores in May 1990. In 1993, compliance with the policy varied among stores. Recommended foods were available regularly in most communities; however, promotional and educational components of the policy were not widely implemented. Dietary improvements were evident in those communities where stores most complied with the policy. Some aspects of the ALPA nutrition policy require modification, and renewed commitment to the policy is likely to improve further the diet in the Aboriginal communities involved. The ALPA nutrition policy is a potential model for the development of other local food and nutrition policies in remote Aboriginal communities.

The effect of retail store managers on aboriginal diet in remote communities

Key nutrient densities of the diet of two remote northern coastal Aboriginal communities were measured using the store-turnover method during the periods that three store managers were responsible for each store respectively. Individual store managers were a greater determinant of nutrient density than the community itself. Furthermore, nutrient densities tended to be highest in both communities when their stores were administered by one particular store manager. The results support the notion that store managers wield considerable power over the food supply of remote Aboriginal communities, and raise questions concerning the ability of Aboriginal community members to influence their own food supplies in retail stores. However, the study also confirms that store managers can be important allies in efforts to improve Aboriginal dietary intake.

University students’ perspective on blended learning

This research project aimed to explore students’ perspective on an appropriate mix of online and-face-to-face activities in a master’s programme in library and information science at an Australian university. Identifying aspects that students evaluate as supportive, challenging and efficient in their learning is important for the design of an appropriate mix in blended learning courses. Twenty-three master’s students responded to a questionnaire containing 40 open-ended and closed questions. Applying both statistical and content analysis provides a deeper understanding of students’ responses. Students like the flexibility and the convenience of online learning, but also the possibilities of face-to-face interaction with teachers and peers for building personal learning networks. Students expect an equal quality of learning delivery and criticised the quality of online participation and lecture recordings. Blended learning is an approach that supports a range of learning styles and life styles.

Bike share's impact on car use : evidence from the United States, Great Britain, and Australia

There are currently more than 400 cities operating bike share programs. Purported benefits of bike share programs include flexible mobility, physical activity, reduced congestion, emissions and fuel use. Implicit or explicit in the calculation of program benefits are assumptions regarding the modes of travel replaced by bike share journeys. This paper examines the degree to which car trips are replaced by bike share, through an examination of survey and trip data from bike share programs in Melbourne, Brisbane, Washing, D.C., London, and Minneapolis/St. Paul. A secondary and unique component of this analysis examines motor vehicle support services required for bike share fleet rebalancing and maintenance. These two components are then combined to estimate bike share’s overall contribution to changes in vehicle kilometres traveled. The results indicate that the estimated mean reduction in car use due to bike share is at least twice the distance covered by operator support vehicles, with the exception of London, in which the relationship is reversed, largely due to a low car mode substitution rate. As bike share programs mature, evaluation of their effectiveness in reducing car use may become increasingly important. This paper reveals that by increasing the convenience of bike share relative to car use and by improving perceptions of safety, the capacity of bike share programs to reduce vehicle trips and yield overall net benefits will be enhanced. Researchers can adapt the analytical approach proposed in this paper to assist in the evaluation of current and future bike share programs.

An international survey of daily disposable contact lens prescribing

Purpose The aim was to determine the extent of daily disposable contact lens prescribing worldwide and to characterise the associated demographics and fitting patterns. Methods Up to 1,000 survey forms were sent to contact lens fitters in up to 40 countries between January and March every year for five consecutive years (2007 to 2011). Practitioners were asked to record data relating to the first 10 contact lens fits or refits performed after receiving the survey form. Survey data collected since 1996 were also analysed for seven nations to assess daily disposable lens fitting trends since that time. Results Data were collected in relation to 97,289 soft lens fits, of which 23,445 (24.1 per cent) were with daily disposable lenses and 73,170 (75.9 per cent) were with reusable lenses. Daily disposable lens prescribing ranged from 0.6 per cent of all soft lenses in Nepal to 66.2 per cent in Qatar. Compared with reusable lens fittings, daily disposable lens fittings can be characterised as follows: older age (30.0 ± 12.5 versus 29.3 ± 12.3 years for reusable lenses); males are over-represented; a greater proportion of new fits versus refits; 85.9 per cent hydrogel; lower proportion of toric and presbyopia designs and a higher proportion of part-time wear. There has been a continuous increase in daily disposable lens prescribing between 1996 and 2011. The proportion of daily disposable lens fits (as a function of all soft lens fits) is positively related to the gross domestic product at purchasing power parity per capita (r2 = 0.55, F = 46.8, p < 0.0001). Conclusions The greater convenience and other benefits of daily disposable lenses have resulted in this modality capturing significant market share. The contact lens field appears to be heading toward a true single-use-only, disposable lens market.

Can Business Continuity Management Create Reliability in Airports? (Issues from Theory into Practice)

The advances made within the aviation industry over the past several decades have significantly improved the availability, affordability and convenience of air travel and have been greatly beneficial in both social and economic terms. Air transport has developed into an irreplaceable service being relied on by millions of people each day and as such airports have become critical elements of national infrastructure to facilitate the movement of people and goods. As components of critical infrastructure (CI), airports are integral parts of a national economy supporting regional as well as national trade, commercial activity and employment. Therefore, any disruption or crisis which impacts the continuity of operations at airports can have significant negative consequences for the airport as a business, for the local economy and other nodes of transport infrastructure as well as for society. Due to the highly dynamic and volatile environment in which airports operate in, the aviation industry has faced many different challenges over the years ranging from terrorist attacks such as September 11, to health crises such as the SARS epidemic to system breakdowns such as the recent computer system outage at Virgin Blue Airlines in Australia. All these events have highlighted the vulnerability of airport systems to a range of disturbances as well as the gravity and widespread impact of any kind of discontinuity in airport functions. Such incidents thus emphasise the need for increasing resilience and reliability of airports and ensuring business continuity in the event of a crisis...

Dispensing doctor : an underutilise resource?

Introduction Multidisciplinary models of organising and providing care have been proposed to decrease the health services gap between urban and rural populations but health workforce shortages exist across most professions and are further exacerbated by maldistribution. Flexibility and expansion of the range of tasks that a health professional can undertake were proposed. Dispensing doctors (DDs) are such an example. As part of DDs’ routine medical practice, DDs are able to both prescribe and dispense medicines to their patients. The granting of a dispensing licence to a doctor is intended to improve rural community access to medicines where there is no pharmacy within a reasonable distance. Method An iterative, qualitative descriptive methodology was used to identify factors which influenced DDs’ practice. Qualitative data were collected by in-depth face-to-face and telephone interviews with DDs. A combination of processes: qualitative content analysis and constant comparison were used to analyse the interview transcripts thematically. Member checking and separate coding were utilised to ensure rigour. Result Thirty-one interviews were conducted. The respondents universally acknowledged that the main reason for dispensing were for the convenience and benefits of their patients and to ensure continuity of care. DDs’ communities were generally more isolated and smaller when compared to their non-dispensing counterparts. DD-respondents viewed their dispensary as a service to the community. Peer pressure on prescribing was a key factors in self-regulating prescribing and dispensing. Conclusion DDs fulfill an important area of unmet needs by providing continuity of pharmaceutical care but the practice is hindered by significant barriers

Reasons for non-urgent presentations to the emergency department in Saudi Arabia

Background The majority of patients who attend emergency departments (EDs) in Saudi Arabia have non-urgent problems, resulting in overcrowding, excessive waiting times and delayed care for more acutely ill patients. The purpose of this research was to examine the reasons for non-urgent visits to a Saudi ED and factors associated with patient perceptions of urgency. Methods We administered a survey to 350 consecutively presenting Canadian Triage and Acuity Scale (CTAS) IV or V adult patients at a large tertiary ED in Riyadh region, Saudi Arabia, during 25 days of data collection in March 2013. Results Over half of the sample usually visited the ED to access healthcare. The most common reasons for attending the ED were not having a regular healthcare provider (63%), being able to receive care on the same day (62%), and the convenience of and access to medical care 24/7 (62%). Approximately two-thirds of CTAS V patients and one-third of CTAS IV patients believed their condition was more urgent than their triage nurse rating. Conclusion Multiple factors influence non-urgent visits to the ED in the Saudi context including insufficient community awareness of the role of the ED and perceived lack of access to primary healthcare services.

A comparison of finite difference and finite volume methods for solving the space-fractional advection-dispersion equation with variable coefficients

Transport processes within heterogeneous media may exhibit non- classical diffusion or dispersion which is not adequately described by the classical theory of Brownian motion and Fick’s law. We consider a space-fractional advection-dispersion equation based on a fractional Fick’s law. Zhang et al. [Water Resources Research, 43(5)(2007)] considered such an equation with variable coefficients, which they dis- cretised using the finite difference method proposed by Meerschaert and Tadjeran [Journal of Computational and Applied Mathematics, 172(1):65-77 (2004)]. For this method the presence of variable coef- ficients necessitates applying the product rule before discretising the Riemann–Liouville fractional derivatives using standard and shifted Gru ̈nwald formulas, depending on the fractional order. As an alternative, we propose using a finite volume method that deals directly with the equation in conservative form. Fractionally-shifted Gru ̈nwald formulas are used to discretise the Riemann–Liouville fractional derivatives at control volume faces, eliminating the need for product rule expansions. We compare the two methods for several case studies, highlighting the convenience of the finite volume approach.

Benchmarking the standard of environmental management practised in marinas

Most existing marinas are boat parking/storing and servicing facilities that have been built over a long period of time for the convenience of local boat owners.

Trade marks for the design and layout of retail premises

In January 2013, Apple Inc obtained United States trademarks for the design and layout of its retail stores. While innovative brand protection strategies of this kind are not without precedent in the United States, traders in Australia have seemingly not adopted them. This article considers the prospects of an applicant seeking to register a similar trade mark in Australia and the protection such a registration would likely provide.

Certified pseudonyms colligated with master secret key

A pseudonym provides anonymity by protecting the identity of a legitimate user. A user with a pseudonym can interact with an unknown entity and be confident that his/her identity is secret even if the other entity is dishonest. In this work, we present a system that allows users to create pseudonyms from a trusted master public-secret key pair. The proposed system is based on the intractability of factoring and finding square roots of a quadratic residue modulo a composite number, where the composite number is a product of two large primes. Our proposal is different from previously published pseudonym systems, as in addition to standard notion of protecting privacy of an user, our system offers colligation between seemingly independent pseudonyms. This new property when combined with a trusted platform that stores a master secret key is extremely beneficial to an user as it offers a convenient way to generate a large number of pseudonyms using relatively small storage.

High pressure in situ diffraction studies of metal–hydrogen systems

“Hybrid” hydrogen storage, where hydrogen is stored in both the solid material and as a high pressure gas in the void volume of the tank can improve overall system efficiency by up to 50% compared to either compressed hydrogen or solid materials alone. Thermodynamically, high equilibrium hydrogen pressures in metal–hydrogen systems correspond to low enthalpies of hydrogen absorption–desorption. This decreases the calorimetric effects of the hydride formation–decomposition processes which can assist in achieving high rates of heat exchange during hydrogen loading—removing the bottleneck in achieving low charging times and improving overall hydrogen storage efficiency of large hydrogen stores. Two systems with hydrogenation enthalpies close to −20 kJ/mol H2 were studied to investigate the hydrogenation mechanism and kinetics: CeNi5–D2 and ZrFe2−xAlx (x = 0.02; 0.04; 0.20)–D2. The structure of the intermetallics and their hydrides were studied by in situ neutron powder diffraction at pressures up to 1000 bar and complementary X-ray diffraction. The deuteration of the hexagonal CeNi5 intermetallic resulted in CeNi5D6.3 with a volume expansion of 30.1%. Deuterium absorption filled three different types of interstices, Ce2Ni2 and Ni4 tetrahedra, and Ce2Ni3 half-octahedra and was accompanied by a valence change for Ce. Significant hysteresis was observed between deuterium absorption and desorption which profoundly decreased on a second absorption cycle. For the Al-modified Laves-type C15 ZrFe2−xAlx intermetallics, deuteration showed very fast kinetics of H/D exchange and resulted in a volume increase of the FCC unit cells of 23.5% for ZrFe1.98Al0.02D2.9(1). Deuterium content, hysteresis of H/D uptake and release, unit cell expansion and stability of the hydrides systematically change with the amount of Al content. In the deuteride D atoms exclusively occupy the Zr2(Fe,Al)2 tetrahedra. Observed interatomic distances are Zr–D = 1.98–2.11; (Fe, Al)–D = 1.70–1.75A˚ . Hydrogenation slightly increases the magnetic moment of the Fe atoms in ZrFe1.98Al0.02 and ZrFe1.96Al0.04 from 1.9 �B at room temperature for the alloy to 2.2 �B for its deuteride.

Perceived obstacles to multi-storey timber-frame construction : an Australian study

The contemporary default materials for multi-storey buildings – namely concrete and steel – are all significant generators of carbon and the use of timber products provides a technically, economically and environmentally viable alternative. In particular, timber’s sustainability can drive increased use and subsequent evolution of the Blue economy as a new economic model. National research to date, however, indicates a resistance to the uptake of timber technologies in Australia. To investigate this further, a preliminary study involving a convenience sample of 15 experts was conducted to identify the main barriers involved in the use of timber frames in multi-storey buildings. A closed-ended questionnaire survey involving 74 experienced construction industry participants was then undertaken to rate the relative importance of the barriers. The survey confirmed the most significant barriers to be a perceived increase in maintenance costs and fire risk, together with a limited awareness of the emerging timber technologies available. It is expected that the results will benefit government and the timber industry, contributing to environmental improvement by developing strategies to increase the use of timber technologies in multi-storey buildings by countering perceived barriers in the Australian context.