Síntese, aplicação e avaliação do efeito do teor de fósforo da celulose fosfatada em argamassa de alvenaria com aditivo comercial a base de hidroxi-etil-metil celulose (HEMC)

Generally, cellulose ethers improves mortar properties such as water retention, workability and setting time, along with adherence to the substrate. However, a major disadvantage of the addition of cellulose ethers in mortars is the delay in hydration of the cement. In this paper a cellulose phosphate (Cp) was synthesized water soluble and has been evaluated the effect of their incorporation into mortar based on Portland cement. Cellulose phosphate obtained was characterized by spectrophotometry Fourier transform infrared (FTIR), X-ray diffraction (XRD), elemental analysis and scanning electron microscopy (SEM). Mortar compositions were formulated with varying phosphorus content in cellulose and cellulose phosphate concentrations, when used in partial or total replacement of the commercial additive based hydroxyethyl methyl cellulose (HEMC). The mortars formulated with additives were prepared and characterized by: testing in the fresh state (consistency index, water retention, bulk density and air content incorporated) and in the hardened state (absorption by capillarity, density, flexural and compression strength). In mixtures the proportion of sand:cement of 1:5 (v / v) and factor a / c = 1.31 and water were held constant. Overall, the results showed that the celluloses phosphates employed in mortars added acted significantly when partially substituting the commercial additive. With regard to consistency index, water retention and bulk density in the fresh state and absorption by capillarity and bulk density apparent in the hardened state, showed no appreciable differences as compared to the commercial additive. The incorporated air content in the fresh state reduced markedly, but did not affect other properties. The mortars with cellulose phosphate, partially replacing the commercial additive showed an improvement of the properties of flexural strength and compressive strength

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Efeito da Gália como aditivo de sinterização em eletrólitos cerâmicos à base de céria sintetizados pelo método de complexação de cátions

Fuel cells are considered one of the most promising ways of converting electrical energy due to its high yield and by using hydrogen (as fuel) which is considered one of the most important source of clean energy for the future. Rare earths doped ceria has been widely investigated as an alternative material for the electrolyte of solid oxide fuel cells (SOFCs) due to its high ionic conductivity at low operating temperatures compared with the traditional electrolytes based on stabilized zirconia. This work investigates the effect of gallium oxide (Gallia) as a sintering aid in Eu doped ceria ceramic electrolytes since this effect has already been investigated for Gd, Sm and Y doped ceria electrolytes. The desired goal with the use of a sintering aid is to reduce the sintering temperature aiming to produce dense ceramics. In this study we investigated the effects on densification, microstructure and ionic conduction caused by different molar fraction of the dopants europium (10, 15 and 20%) and gallium oxide (0.3, 0.6 and 0.9%) in samples sintered at 1300, 1350 and 1450 0 C. Samaria (10 and 20%) doped ceria samples sintered between 1350 and 1450 °C were used as reference. Samples were synthesized using the cation complexation method. The ceramics powders were characterized by XRF, XRD and SEM, while the sintered samples were investigated by its relative density, SEM and impedance spectroscopy. It was showed that gallia contents up to 0.6% act as excellent sintering aids in Eu doped ceria. Above this aid content, gallia addition does not promote significant increase in density of the ceramics. In Ga free samples the larger densification were accomplished with Eu 15% molar, effect expressed in the microstructure with higher grain growth although reduced and surrounded by many open pores. Relative densities greater than 95 % were obtained by sintering between 1300 and 1350 °C against the usual range 1500 - 1600 0 C. Samples containing 10% of Sm and 0.9% of Ga reached 96% of theoretical density by sintering at 1350 0 C for 3h, a gain compared to 97% achieved with 20% of Sm and 1% of Ga co-doped cerias sintered at 1450 0 C for 24 h as described in the literature. It is found that the addition of gallia in the Eu doped ceria has a positive effect on the grain conductivity and a negative one in the grain boundary conductivity resulting in a small decrease in the total conductivity which will not compromise its application as sintering aids in ceria based electrolytes. Typical total conductivity values at 600 and 700 °C, around 10 and 30 mS.cm -1 respectively were reached in this study. Samples with 15% of Eu and 0.9 % of Ga sintered at 1300 and 1350 °C showed relative densities greater than 96% and total conductivity (measured at 700 °C) between 20 and 33 mS.cm -1 . The simultaneous sintering of the electrolyte with the anode is one of the goals of research in materials for SOFCs. The results obtained in this study suggest that dense Eu and Ga co-doped ceria electrolytes with good ionic conductivity can be sintered simultaneously with the anode at temperatures below 1350 °C, the usual temperature for firing porous anode materials

Itinerário educacional de uma aluna cega e a busca pela imagem adaptada

The scope of this study directs an investigation in search of how the blind person learns knowledge at school mediated by the image in context of an inclusive education and how it can be (or is) triggered by the adaptation of images to the tactile seizure of the blind person and his correlative process of reading. To achieve this intent we choose a qualitative approach of research and opted for the modality of case study, based on the empirical field of a public school in the city of Cruzeta, RN and as a the main subject a congenitally blind female student enrolled in high school there, focusing, often, on the discipline of geography in its words mapping. Our procedures for construction of data are directly involved to the documentary analysis of open reflective interview and observation. The base guiding theory of our assessments is located in the current understanding about the human psychological development of its educational process inside an inclusive perspective, of contemporary conceptions about the visual disability as well of image as a cultural product. Accordingly, the human person is a concrete subject, whose development is deeply marked by the culture, historically built by human society. This subject regardless of his specific features, grasping the world in an interactive and immediate way, internalising and producing culture. In this thinking, we believe that the blind person perceives in multiple senses the stimuli of his environment and acts in the world toward his integration into the social environment. The image as a product of culture, historically and socially determined, appears as a sign conventionally used as an icon that in itself concentrates knowledge of which the student who does not realize visually himself and his surroundings cannot be excluded. In this direction, the inclusive educational process must build conditions of access to knowledge for all students without distinction, including access to the interpretation of the images originally intended for the seizure strictly visual to other perceptive models. Based in this theory and adopting principles of content analysis, we circulated inside the interpretation of the data constructed from the analysis of documents, from the subject speeches, from records of the observation made in the classroom and other notes of the field daily. In the search for pictures on the school contents, adapted to the tactile seizure of blind student, was seen little and not systematic in practice and teaching at the school. It showed us the itinerary of the student life marked by a succession of supports, most of the time inappropriate and pioneers in cooling the construction of her autonomy. It also showed us the tensions and contradictions of a school environment, supposedly inclusive, that stumbles in search of its intent, in the attitudinal and cumulative barriers brought, because of its aggravating maintenance. These findings arose of crossing data around of a categorization that gives importance to 1) Concepts regarding the school inclusion, 2) Elements of the school organization, educational proposal and teaching practice, 3) Meaning of the visual image as the object of knowledge, 4) Perception in multiple senses and 5) Development and learning of the blind person before impositions of the social environment. In light of these findings we infer that it must be guaranteed to the disabled person removal of the attitudinal barriers that are against his full development and the construction of his autonomy. In that sense, should be given opportunity to the student with visual disability, similarly to all students, not only access to school, but also the dynamics of a school life efficient, that means the seizure of knowledge in all its modalities, including the imagery. To that end, there is a need of the continued training of teachers, construction of a support network in response to all needs of students, and the opportunity to development of reading skills beyond a perspective eminently focused in the sight

Habitus, representações sociais e a construção do ser professora da educação infantil da cidade de Campina Grande - PB

We present here the results of a study whose objectives were to identify the social representation of being a professor of early childhood education in Campina Grande - PB, in the public state and municipal levels, and detect structural diagrams of a possible mental habitus of professorial faculty of education child, which would form the basis for the construction of this representation. As a theoretical base, we adopted the model developed by Domingos Sobrinho (1998, 2000, 2003, 2010, 2011), which articulates the Theory of Social Representations, Serge Moscovici, and the foundations and concepts of Pierre Bourdieu praxiology. It is based also on the Central Nucleus Theory, which focuses on the structural approach of social representations. Thus, puts in evidence the relational dynamics and symbolic, through which individuals come into contact, describe, understand and reproduce the outside world in his image and likeness. 199 teachers participated in the study of child care and pre-schools of Campina Grande - PB and 109 of the state. The methods and techniques used were: a) participant observation of everyday life of teachers of kindergartens and preschools, b) semi-structured interview, c) free associations of words with inducing the expression 'being a professor of early childhood education is ...' and d) semi-structured questionnaire. The data were analyzed in the case of interviews through the categorical content analysis, as proposed by Bauer (2010); free-associations, using the software Ensemble L'Analyse des Programmes Permettant evocations (EVOC), developed by Vergès (2002), which combines frequency and average order of recall (or association) and the questionnaire data, the Statistical Package for the Social Sciences (SPSS). It was verified the existence of a unique social representation shared by the population studied, but its content is structured differently. For local teachers, the centrality of the content is given by the elements commitment, dedication, responsibility, and rewarding teachers for this state revolves around the elements of love, patience, and rewarding responsibility. However, it is constructed mainly based on the related produced by a religious habitus and maternal habitus, which are part of the genesis of the establishment of professorial habitus in focus, among other cultural references of secondary influence. We conclude that a teacher of early childhood education actually researched, is materialized in the practices of educating and caring, in a clear fusion of the role of teacher and mother

Utilização de subprodutos de origem animal em dietas formuladas com base em proteína bruta e proteína ideal para frangos de corte de 22 a 42 dias de idade

Foi conduzido um experimento para avaliar a utilização de subprodutos de origem animal em dietas para frangos de corte de 22 a 42 dias de idade, formuladas com base nos conceitos de proteína bruta e proteína ideal. O delineamento foi inteiramente casualizado em esquema fatorial 2x2+1, ou seja, duas fontes de proteína de origem animal (farinha de vísceras de aves e farinha de sangue bovino), dois conceitos de formulação (proteína bruta e proteína ideal) e uma dieta controle à base de milho e farelo de soja, com quatro repetições. As características avaliadas foram ganho de peso, consumo de ração, conversão alimentar, rendimentos de carcaça e de peito e gordura abdominal. O ganho de peso, consumo de ração e conversão alimentar não foram afetados pelas fontes de proteína e conceitos de formulação, no entanto, o teor de gordura abdominal foi menor nas aves alimentadas com farinha de vísceras que naquelas alimentadas com dieta contendo farinha de sangue.

Uma proposição para o cálculo de mapas de disparidade de imagens estéreo usando um interpolador neural baseado em funções de base radial

This study aims to seek a more viable alternative for the calculation of differences in images of stereo vision, using a factor that reduces heel the amount of points that are considered on the captured image, and a network neural-based radial basis functions to interpolate the results. The objective to be achieved is to produce an approximate picture of disparities using algorithms with low computational cost, unlike the classical algorithms

Uso de índices de reflectância das folhas para avaliar o nível de nitrogênio em grama-bermuda

A reflectância da folha em determinados comprimentos de onda pode ser uma alternativa para estimar a concentração de nitrogênio (N) na planta, devido à relação entre o teor de clorofila e de N no tecido foliar. Este trabalho teve por objetivo avaliar índices da cor verde em grama-bermuda para predizer o nível de N na planta. O experimento foi conduzido em área comercial de produção de grama-bermuda, localizada na cidade de Capela do Alto/SP. O delineamento experimental utilizado foi de blocos ao acaso, com cinco tratamentos (0, 150, 300, 450 e 600kg de N ha-1) e quatro repetições. Foi avaliada a reflectância das folhas pelo uso de medidor de cor de grama, clorofilômetro, e por meio de análise da imagem digital. O matiz (H) e índice de cor verde escuro (ICVE), calculados com base nos índices de reflectância da imagem digital, o ICVE, obtido com medidor de cor de grama, e a intensidade de coloração verde (ICV), obtida com o clorofilômetro, apresentaram forte correlação positiva com a concentração de N e a taxa de cobertura do solo (TCS) da grama-bermuda, podendo ser utilizados como índices auxiliares na recomendação de adubação nitrogenada para a cultura. Os valores obtidos que podem servir como primeiros índices para avaliação do estado nutricional em N na grama-bermuda Celebration são: H de 88 a 109o e ICVE de 0,54 a 0,66 (imagem digital); H de 67 a 76o e ICVE de 0,41 a 0,44 (medidor de cor da grama TCM 500); e ICV de 374 a 471 (clorofilômetro CM 1000).

Preparação de poliuretana à base de óleo de mamona

Polyurethanes are very versatile macromolecular materials that can be used in the form of powders, adhesives and elastomers. As a consequence, they constitute important subject for research as well as outstanding materials used in several manufacturing processes. In addition to the search for new polyurethanes, the kinetics control during its preparation is a very important topic, mainly if the polyurethane is obtained via bulk polymerization. The work in thesis was directed towards this subject, particularly the synthesis of polyurethanes based castor oil and isophorone diisocianate. As a first step castor oil characterized using the following analytical methods: iodine index, saponification index, refraction index, humidity content and infrared absorption spectroscopy (FTIR). As a second step, test specimens of these polyurethanes were obtained via bulk polymerization and were submitted to swelling experiments with different solvents. From these experiments, the Hildebrand parameter was determined for this material. Finally, bulk polymerization was carried out in a differential scanning calorimetry (DSC) equipment, using different heating rates, at two conditions: without catalyst and with dibutyltin dilaurate (DBTDL) as catalyst. The DSC curves were adjusted to a kinetic model, using the isoconversional method, indicating the autocatalytic effect characteristic of this class of polymerization reaction

Extração semiautomática de contornos de telhado de edifícios com base em snakes e programação dinâmica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Predição de sombras de edifícios sobre vias urbanas com base em modelos digitais de elevações e dados de imagens aéreas de alta resolução

This research presents a methodology for prediction of building shadows cast on urban roads existing on high-resolution aerial imagery. Shadow elements can be used in the modeling of contextual information, whose use has become more and more common in image analysis complex processes. The proposed methodology consists in three sequential steps. First, the building roof contours are manually extracted from an intensity image generated by the transformation of a digital elevation model (DEM) obtained from airborne laser scanning data. In similarly, the roadside contours are extracted, now from the radiometric information of the laser scanning data. Second, the roof contour polygons are projected onto the adjacent roads by using the parallel projection straight lines, whose directions are computed from the solar ephemeris, which depends on the aerial image acquisition time. Finally, parts of shadow polygons that are free from building perspective obstructions are determined, given rise to new shadow polygons. The results obtained in the experimental evaluation of the methodology showed that the method works properly, since it allowed the prediction of shadow in high-resolution imagery with high accuracy and reliability.

Engenharia de microestrutura em varistor à base de ZnO: evidências de homogeneidade e correlação com reações químicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preparação de resinas de poliuretana à base de óleo de mamona e dietanolamina

The aim of this work was the preparation of polyols from reactions between castor oil and dietanolamine to increase the hydroxyl content and the network degree in the products to application in electronic devices. The polyols and the mixtures obtained were characterized by nuclear magnetic ressonance. Castor oil (CO) is a natural triglyceride - based polyol possessing hydroxyl groups, which allow several reactions that produce many different products. Among them are the polyurethanes (PU), which have been considered an ideal product for the covering of electricelectronic circuits, due to their excellent electrical, shock-absorbing, solvents resistance and hydrolytic stability properties. About 90% of the fatty acids present in the castor oil are ricinoleic acid (12-hydroxyoleic acid), while the remaining 10% correspond to non-hydroxylated fatty acids, mainly linoleic and oleic acids. The chemical analysis of castor oil indicates a hydroxyl number of 2.7. In this work, a polyol was obtained by the reaction of the CO with diethanolamine (DEA), in order to elevate the hydroxyl value from 160 to 230 or to 280 mgKOH/g, and characterized by nuclear magnetic resonance (NMR) 1H and 13C (Mercury 200). The polyadition of the resulting polyol with isophorone diisocianate (IPDI) was carried out at 60°C, and the reaction kinetics was followed by rheological measurements in a Haake RS150 rheometer. The electrical properties were determined in a HP LCR Meter 4262A, at 1.0 Hz and 10.0 KHz. The chemical analysis showed that the polyols obtained presented hydroxyl number from 230 to 280 mgKOH/g. The polyadition reaction with IPDI produced polyurethane resins with the following properties: hardness in the range from 45 shore A to 65 shore D (ASTM D2240); a dielectric constant of 3.0, at 25°C (ASTM D150). Those results indicate that the obtained resins present compatible properties to the similar products of fossil origin, which are used nowadays for covering electric-electronic circuits. Therefore, the PUs from castor oil can be considered as alternative materials of renewable source, free from the highly harmful petroleum - derived solvents

Síntese, sinterização e caracterização de ferritas à base de Ni-Zn

Were synthesized different ferrites NixZn1-xFe2O4 (0,4 ≤ x ≤ 0,6) compositions by using citrate precursor method. Initially, the precursors citrates of iron, nickel and zinc were mixed and homogenized. The stoichiometric compositions were calcined at 350°C without atmosphere control and the calcined powders were pressed in pellets and toroids. The pressed material was sintered from 1100º up to 1200ºC in argon atmosphere. The calcined powders were characterized by XRD, TGA/DTG, FTIR, SEM and vibrating sample magnetometer (VSM). All sintered samples were characterized using XRD, SEM, VSM and measurements of magnetic permeability and loss factor were obtained. It was formed pure ferromagnetic phase at all used temperatures. The Rietveld analyses allowed to calculate the cations level occupation and the crystallite size. The analyses obtained nanometric crystals (12-20 nm) to the calcined powder. By SEM, the sintered samples shows grains sizes from 1 to 10 μm. Sintered densities (ρ) were measured by the Archimedes method and with increasing Zn content, the bulk density decrease. The better magnetization results (105-110 emu/g) were obtained for x=0,6 at all sintering temperatures. The hysteresis shows characteristics of soft magnetic material. Two magnetization processes were considered, superparamagnetism at low temperature and the magnetic domains formation at high temperatures. The sintered toroids presents relative magnetic permeability (μr) from 7 to 32 and loss factor (tanδ) of about 1. The frequency response of toroids range from 0,3 kHz to 0,2 GHz. The composition x=0,5 presents both greater μr and tanδ values and x=0,6 the most broad range of frequency response. Various microstructural factors show influence on the behavior of μr and tanδ, such as: grain size, porosity across grain boundary and inside the grain, grain boundary content and domain walls movement during the process of magnetization at high frequency studies (0,3kKz 0,2 GHz)

Desenvolvimento de componentes nanométricos para aplicação em células a combustível à base de sólidos estruturados e filmes finos

The present work aims the preparation of filmes of strontium-doped lanthanum manganite (perovskita) yttria-stabilized zirconia (LSM-SDC) films deposited on substrate of YSZ by means of spin coating technique having as principal objective their application to solid oxide fuel cells of intermediate temperature. La0,8Sr0,2MnO3 and Ce0,8Sm0,2O1,9 were obtained by modified Pechini method by use of gelatin which act as polymerization agent. The powders obtained were characterized by Xray fluorescence, X ray diffraction, electronic scanning microscopy and the superficial area by BET method. The results obtained by X-ray fluorescence showed that the route adopted for obtention of powders was effective in the obtention of the compositions with close values to the stoichiometrics. Ethyl cellulose was used as pore-forming agent and mixed with the LSM-SDC powders in weight proportions of 1:24, 2:23 and 1:9. The films were sintered at 1150 °C for 4 h and characterized by X-ray diffraction and scanning electron microscopy technique (SEM) and atomic force. The phases quantification of the precursory powders and of the obtained films was carried through Rietveld method. According with the analysis of SEM, as the content of ethyl cellulose was increased, the pore distribution in films become more uniform and the pore size reduced. The methodology used for the obtention of the films was very efficient, considering a material was obtained with characteristics that were proper to the application as electrolyte/cathode system to solid oxide fuel cells