Automaatioteknologian opetus kuvakepohjaisella ohjelmointikielellä : Teknologiakasvatuksen opetuskokeilu kolmessa eri käyttöympäristössä

Tutkimus kuuluu Helsingin yliopiston opettajankoulutuslaitoksen luonnontieteen ja teknologian opetusta ja opetusvälineitä kehittävään LUONTI-projektiin. Tutkimuksen tarkoituksena on teknologiakasvatukseen liittyvän käsitteistön selkiyttäminen ja projektissa kehitetyn laitteiston, Empirica Controlin, käyttöönotto ja sen tutkiminen. Teoreettisessa taustassa tarkastellaan teknologiaa ja teknologiakasvatusta oppivelvollisuuskoulun näkökulmasta. Erilaisia teknologiamäärittelyjä ja ajatuksia teknologian olemuksesta verrataan tutkimuksessa kehitetyillä malleilla. Teknologia on luonteeltaan integroiva aihepiiri, jolle on ainakin tässä tutkimuksessa esitetyn teorian valossa vaikea määritellä omaa tiedonalaa ja siten luontevaa paikkaa omana oppiaineenaan. Avoimessa oppimisympäristössä tapahtuvaa kognitiivisen teorian mukaista oppimista on hahmoteltu muokkaamalla Lehtisen (1988) esittämää mallia. Aikaisempien tutkimus- ja kokeiluraporttien perusteella määritellään kolme luovaa ongelmanratkaisua ja avointa oppimisympäristöä hyödyntävää työtapaa: mallintava menetelmä, ongelmanratkaisu ja vapaa kokeilu. Empirica Controlia verrataan tekstipohjaiseen Logoon ja muihin markkinoilla oleviin laitteistoihin sekä tarkastellaan sen ominaisuuksia didaktiikan ja konstruktivistisen oppimisteorian näkökulmasta. Tutkimuksen empiirinen osuus koostuu kolmesta opetuskokeilusta. Laajin kokeilu järjestettiin kahdella helsinkiläisellä peruskoulun ala-asteen 2. luokalla. Menetelmällisenä viitekehyksenä oli neljä sykliä käsittävä opetus- ja arviointikäytäntöjen kehittämiseen pyrkivä toimintatutkimus, jossa jokainen sykli pitää sisällään kvantitatiivisesti suoritetun oppimisen tarkastelun. Tiedonhankintamenetelminä käytettiin oppilaiden itsearviointia, erilaisia haastatteluja ja ääninauhan tukemaan strukturoitua päiväkirjaa pyrkien menetelmälliseen triangulaatioon. Näitä tuloksia varmennettiin kahdella lyhyemmällä opetuskokeilulla, joista toisessa tutkittavat olivat viidesluokkalaisia ja toisessa luokan- ja lastentarhanopettajiksi opiskelevia. Tutkimus tuotti kokemuksia Empirica Controlin opetuskäytöstä sekä laitteiston kehittämisehdotuksia. Tulosten mukaan oppilailla oli työskentelyn vaatiman teknologiaan, tietotekniikkaan ja rakentamisee nliittyvät perusvalmiudet. He kokivat työskentelyn positiivisena ja oppivat käyttämään ohjelmointikielen yksinkertaisimpia käskyjä. Lyhyemmät opetuskokeilut antoivat samansuuntaisia tuloksia. Teknologian oppimista tutkittiin automaatioteknologisten laitteiden toiminnasta annettujen selitysten kautta. Selityksissä havaittiin vain hienoista paranemista. Avainsanat: teknologiakasvatus, konstruktivismi, avoin oppimisympäristö, ryhmätyö, tietokoneavusteinen opetus,triangulaatio Keywords: technology education, constructivism, open learning environment, groupwork, computer-aided instruction,triangulation

GEODERM: geometric shape design system using an entity-relationship model

GEODERM, a microcomputer-based solid modeller, which incorporates the parametric object model, is discussed. The entity-relationship model, which is used to describe the conceptual schema of the geometric database, is also presented. Three of the four modules of GEODERM, which have been implemented are described in some detail. They are the Solid Definition Language (SDL), the Solid Manipulation Language (SML) and the User-System Interface.

2 Algorithms For 3-Layer Channel Routing

A channel router is an important design aid in the design automation of VLSI circuit layout. Many algorithms have been developed based on various wiring models with routing done on two layers. With the recent advances in VLSI process technology, it is possible to have three independent layers for interconnection. In this paper two algorithms are presented for three-layer channel routing. The first assumes a very simple wiring model. This enables the routing problem to be solved optimally in a time of O(n log n). The second algorithm is for a different wiring model and has an upper bound of O(n2) for its execution time. It uses fewer horizontal tracks than the first algorithm. For the second model the channel width is not bounded by the channel density.

R U there yet? using virtual classrooms to transform teaching practice

Access to quality higher education is challenging for many Western Australians that live outside the metropolitan area. In 2010, the School of Education moved to flexible delivery of a fully online Bachelor of Education degree for their non -metropolitan students. The new model of delivery allows access for students from any location provided they have a computer and an internet connection. A number of academic staff had previously used an asynchronous environment to deliver learning modules housed within a learning management system (LMS) but had not used synchronous software with their students. To enhance the learning environment and to provide high quality learning experiences to students learning at a distance, the adoption of synchronous software (Elluminate Live) was introduced. This software is a real-time virtual classroom environment that allows for communication through Voice over Internet Protocol (VoIP) and videoconferencing, along with a large number of collaboration tools to engage learners. This research paper reports on the integration of a live e-learning solution into the current LMS environment. Qualitative data were collected from academic staff through informal interviews and participant observation. The findings discuss (i) perceived level of support; (ii) identification of strategies used to create an effective online teacher presence; (iii) the perceived impact on the students' learning outcomes; and (iv) guidelines for professional development to enhance pedagogy within the live e-learning environment.

FSK bursts for efficient clutter rejection

The clutter-rejection properties of compact f.s.k. bursts with amplitude modulation are investigated. A procedure for computer-aided design of such signals is given. The loss of clutter performance on constraining the individual pulse amplitudes to be equal is evaluated.

Recapitulation in generating spatial layouts: Representations of embryogenesis in evolutionary design modelling

The noted 19th century biologist, Ernst Haeckel, put forward the idea that the growth (ontogenesis) of an organism recapitulated the history of its evolutionary development. While this idea is defunct within biology, the idea has been promoted in areas such as education (the idea of an education being the repetition of the civilizations before). In the research presented in this paper, recapitulation is used as a metaphor within computer-aided design as a way of grouping together different generations of spatial layouts. In most CAD programs, a spatial layout is represented as a series of objects (lines, or boundary representations) that stand in as walls. The relationships between spaces are not usually explicitly stated. A representation using Lindenmayer Systems (originally designed for the purpose of modelling plant morphology) is put forward as a way of representing the morphology of a spatial layout. The aim of this research is not just to describe an individual layout, but to find representations that link together lineages of development. This representation can be used in generative design as a way of creating more meaningful layouts which have particular characteristics. The use of genetic operators (mutation and crossover) is also considered, making this representation suitable for use with genetic algorithms.

Compact AM Signals for Maximum Clutter Rejection

The transmitted signal is assumed to consist of a close succession of rectangular pulses of equal width. A matched filter scheme is employed and a theory is developed for a computer-aided optimization of the envelope of monotone compact signals for maximum rejection of dense clutter of any given distribution in range. Specific results are presented and indeterminate cases are discussed.

Pentoxifylline induces hyperactivation and acrosome reaction in spermatozoa of golden hamsters: changes in motility kinematics

Pentoxifylline (PF) is used to enhance motility of spermatozoa from infertile human subjects. We have previously shown that 0.45 mM PF improved capacitation of spermatozoa and fertilization of oocytes in vitro in hamsters. The present study was carried out to assess PF- induced changes in motility kinematics of hamster spermatozoa by a computer-aided sperm analyser (CASA) and determine the timing of onset of hyperactivation (HA) and acrosome reaction (AR) in PF-treated spermatozoa. Motility kinematics were analysed by CASA for 0-8 h in the absence or presence of 0.45 mM PF in Tyrode's medium supplemented with lactate, pyruvate and polyvinyl alcohol (TLP-PVA) or in TLP-PVA with bovine serum albumin (TALP-PVA). Conventional assessment was also made on the percentage of motility and quality of motility of spermatozoa; values were expressed as sperm motility index (SMI). Both in TALP-PVA and TLP-PVA, PF markedly increased SMI, especially the quality of motility (P < 0.02) by 2-3 h which was sustained up to 6 h. The motility kinematic data of PF-treated spermatozoa in TALP-PVA showed that average path velocity, curvilinear velocity and amplitude of lateral head displacement significantly (P < 0.05) increased as early as 2 h, with the expected decrease in straightness (STR) and linearity (LIN). Similar changes were also observed with PF-treated spermatozoa in TLP-PVA. Moreover, the percentage of hyperactivated spermatozoa in PF-treated samples was significantly (P < 0.001) higher than the untreated control at 2 h. To determine whether PF could induce AR, independent of bovine serum albumin, quantitative AR was assessed by observing the presence or absence of acrosomal cap on viable spermatozoa. PF significantly (P < 0.001) increased the percentage of AR as early as 2 h, reaching maximum at 4 h both in TALP-PVA (P < 0.05) and in TLP-PVA (P < 0.001). These results show that, in hamsters, PF induces early onset (by 2 h) of HA and AR and increases the proportion of spermatozoa undergoing physiological maturation.

Automated inspection of aircraft parts using a modified ICP algorithm

The application of computer-aided inspection integrated with the coordinate measuring machine and laser scanners to inspect manufactured aircraft parts using robust registration of two-point datasets is a subject of active research in computational metrology. This paper presents a novel approach to automated inspection by matching shapes based on the modified iterative closest point (ICP) method to define a criterion for the acceptance or rejection of a part. This procedure improves upon existing methods by doing away with the following, viz., the need for constructing either a tessellated or smooth representation of the inspected part and requirements for an a priori knowledge of approximate registration and correspondence between the points representing the computer-aided design datasets and the part to be inspected. In addition, this procedure establishes a better measure for error between the two matched datasets. The use of localized region-based triangulation is proposed for tracking the error. The approach described improves the convergence of the ICP technique with a dramatic decrease in computational effort. Experimental results obtained by implementing this proposed approach using both synthetic and practical data show that the present method is efficient and robust. This method thereby validates the algorithm, and the examples demonstrate its potential to be used in engineering applications.

Early diagnosis of breast cancer

The greatest effect on reducing mortality in breast cancer comes from the detection and treatment of invasive cancer when it is as small as possible. Although mammography screening is known to be effective, observer errors are frequent and false-negative cancers can be found in retrospective studies of prior mammograms. In the year 2001, 67 women with 69 surgically proven cancers detected at screening in the Mammography Centre of Helsinki University Hospital had previous mammograms as well. These mammograms were analyzed by an experienced screening radiologist, who found that 36 lesions were already visible in previous screening rounds. CAD (Second Look v. 4.01) detected 23 of these missed lesions. Eight readers with different kinds of experience with mammography screening read the films of 200 women with and without CAD. These films included 35 of those missed lesions and 16 screen-detected cancers. CAD sensitivity was 70.6% and specificity 15.8%. Use of CAD lengthened the mean time spent for readings but did not significantly affect readers sensitivities or specificities. Therefore the use of applied version of CAD (Second Look v. 4.01) is questionable. Because none of those eight readers found exactly same cancers, two reading methods were compared: summarized independent reading (at least a single cancer-positive opinion within the group considered decisive) and conference consensus reading (the cancer-positive opinion of the reader majority was considered decisive). The greatest sensitivity of 74.5% was achieved when the independent readings of 4 best-performing readers were summarized. Overall the summarized independent readings were more sensitive than conference consensus readings (64.7% vs. 43.1%) while there was far less difference in mean specificities (92.4% vs. 97.7%). After detecting suspicious lesion, the radiologist has to decide what is the most accurate, fast, and cost-effective means of further work-up. The feasibility of FNAC and CNB in the diagnosis of breast lesions was compared in non-randomised, retrospective study of 580 (503 malignant) breast lesions of 572 patients. The absolute sensitivity for CNB was better than for FNAC, 96% (206/214) vs. 67% (194/289) (p < 0.0001). An additional needle biopsy or surgical biopsy was performed for 93 and 62 patients with FNAC, but for only 2 and 33 patients with CNB. The frequent need of supplement biopsies and unnecessary axillary operations due to false-positive findings made FNAC (294 ) more expensive than CNB (223 ), and because the advantage of quick analysis vanishes during the overall diagnostic and referral process, it is recommendable to use CNB as initial biopsy method.

Conflict-Tolerant Features

We consider systems composed of a base system with multiple “features” or “controllers”, each of which independently advise the system on how to react to input events so as to conform to their individual specifications. We propose a methodology for developing such systems in a way that guarantees the “maximal” use of each feature. The methodology is based on the notion of “conflict-tolerant” features that are designed to continue offering advice even when their advice has been overridden in the past. We give a simple priority-based composition scheme for such features, which ensures that each feature is maximally utilized. We also provide a formal framework for specifying, verifying, and synthesizing such features. In particular we obtain a compositional technique for verifying systems developed in this framework.

Pathways to health : Determinants of health, health behaviour and health inequalities in early adulthood

There is increasing evidence that the origins of poor adult health and health inequalities can be traced back to circumstances preceding current socioeconomic position and living conditions. The life-course approach to examining the determinants of health has emphasised that exposure to adverse social and economic circumstances in earlier life or concurrent adverse circumstances due to unfavourable living conditions in earlier life may lead to poor health, health-damaging behaviour, disease or even premature death in adulthood. There is, however, still a lack of knowledge about the contribution of social and economic circumstances in childhood and youth to adult health and health inequalities, and even less is known about how environmental and behavioural factors in adulthood mediate the effects of earlier adverse experiences. The main purpose of this study was to deepen our understanding of the development of poor health, health-damaging behaviours and health inequalities during the life-course. Its aim was to find out which factors in earlier and current circumstances determine health, the most detrimental indicators of health behaviour (smoking, heavy drinking and obesity as a proxy for the balance between nutrition and exercise), and educational health differences in young adults in Finland. Following the ideas of the social pathway theory, it was assumed that childhood environment affects adult health and its proximal determinants via different pathways, including educational, work and family careers. Early adulthood was studied as a significant phase of life when many behavioural patterns and living conditions relevant to health are established. In addition, socioeconomic health inequalities seem to emerge rapidly when moving into adulthood; they are very small or non-existent in childhood and adolescence, but very marked by early middle age. The data of this study were collected in 2000 2001 as part of the Health 2000 Survey (N = 9,922), a cross-sectional and nationally representative health interview and examination survey. The main subset of data used in this thesis was the one comprising the age group 18 29 years (N = 1,894), which included information collected by standardised structured computer-aided interviews and self-administered questionnaires. The survey had a very high participation rate at almost 90% for the core questions. According to the results of this study, childhood circumstances predict the health of young adults. Almost all the childhood adversities studied were found to be associated with poor self-rated health and psychological distress in early adulthood, although fewer associations were found with the somatic morbidity typical of young adults. These effects seemed to be more or less independent of the young adult s own education. Childhood circumstances also had a strong effect on smoking and heavy drinking, although current circumstances and education in particular, played a role in mediating this effect. Parental smoking and alcohol abuse had an influence on the corresponding behaviours of offspring. Childhood circumstances had a role in the development of obesity and, to a lesser extent, overweight, particularly in women. The findings support the notion that parental education has a strong effect on early adult obesity, even independently of the young adult s own educational level. There were marked educational differences in self-rated health in early adulthood: those in the lowest educational category were most likely to have average or poorer health. Childhood social circumstances seemed to explain a substantial part of these educational differences. In addition, daily smoking and heavy drinking contributed substantially to educational health differences. However, the contribution of childhood circumstances was largely shared with health behaviours adopted by early adulthood. Employment also shared the effects of childhood circumstances on educational health differences. The results indicate that childhood circumstances are important in determining health, health behaviour and health inequalities in early adulthood. Early recognition of childhood adversities followed by relevant support measures may play an important role in preventing the unfortunate pathways leading to the development of poor health, health-damaging behaviour and health inequalities. It is crucially important to recognise the needs of children living in adverse circumstances as well as children of substance abusing parents. In addition, single-parent families would benefit from support. Differences in health and health behaviours between different sub-groups of the population mean that we can expect to see ever greater health differences when today s generation of young adults grows older. This presents a formidable challenge to national health and social policy as well as health promotion. Young adults with no more than primary level education are at greatest risk of poor health. Preventive policies should emphasise the role of low educational level as a key determinant of health-damaging behaviours and poor health. Keywords: health, health behaviour, health inequalities, life-course, socioeconomic position, education, childhood circumstances, self-rated health, psychological distress, somatic morbidity, smoking, heavy drinking, BMI, early adulthood

CAD Standardization in Construction – a Process View

There has been a demand for uniform CAD standards in the construction industry ever since the large-scale introduction of computer aided design systems in the late 1980s. While some standards have been widely adopted without much formal effort, other standards have failed to gain support even though considerable resources have been allocated for the purpose. Establishing a standard concerning building information modeling has been one particularly active area of industry development and scientific interest within recent years. In this paper, four different standards are discussed as cases: the IGES and DXF/DWG standards for representing the graphics in 2D drawings, the ISO 13567 standard for the structuring of building information on layers, and the IFC standard for building product models. Based on a literature study combined with two qualitative interview studies with domain experts, a process model is proposed to describe and interpret the contrasting histories of past CAD standardisation processes.

Parallel circuit partitioning on a reduced array architecture

The physical design of a VLSI circuit involves circuit partitioning as a subtask. Typically, it is necessary to partition a large electrical circuit into several smaller circuits such that the total cross-wiring is minimized. This problem is a variant of the more general graph partitioning problem, and it is known that there does not exist a polynomial time algorithm to obtain an optimal partition. The heuristic procedure proposed by Kernighan and Lin1,2 requires O(n2 log2n) time to obtain a near-optimal two-way partition of a circuit with n modules. In the VLSI context, due to the large problem size involved, this computational requirement is unacceptably high. This paper is concerned with the hardware acceleration of the Kernighan-Lin procedure on an SIMD architecture. The proposed parallel partitioning algorithm requires O(n) processors, and has a time complexity of O(n log2n). In the proposed scheme, the reduced array architecture is employed with due considerations towards cost effectiveness and VLSI realizability of the architecture.The authors are not aware of any earlier attempts to parallelize a circuit partitioning algorithm in general or the Kernighan-Lin algorithm in particular. The use of the reduced array architecture is novel and opens up the possibilities of using this computing structure for several other applications in electronic design automation.

Perceptions Towards Adoption of Mobile Self-services: A Case Study (Available in Hanken intranet only)

This thesis is an exploratory case study that aims to understand the attitudes affecting adoption of mobile self-services. This study used a demo mobile self-service that could be used by consumers for making address changes. The service was branded with a large and trusted Finnish brand. The theoretical framework that was used consisted of adoption theories of technology, adoption theories of self-service and literature concerning mobile services. The reviewed adoption theories of both technology and self-service had their foundation in IDT or TRA/TPB. Based on the reviewed theories an initial framework was created. The empirical data collection was done through three computer aided group interview sessions with a total of 32 respondents. The data analysis started from the premises of the initial framework. Based on the empirical data the framework was constantly reviewed and altered and the data recoded accordingly. The result of this thesis was a list of attitudinal factors that affect the adoption of a mobile self-service either positively or negatively. The factors that were found to affect the attitudes towards adoption of mobile self-services positively were: that the service was time & place independent and saved time. Most respondents, but not all, also had a positive attitude towards adoption due to ease of use and being mentally compatible with the service. Factors that affected adoption negatively were lack of technical compatibility, perceived risk for high costs and risk for malicious software. The identified factors were triangulated in respect to existing literature and general attitudes towards mobile services.