Approximate polytope ensemble for one-class classification

In this work, a new one-class classification ensemble strategy called approximate polytope ensemble is presented. The main contribution of the paper is threefold. First, the geometrical concept of convex hull is used to define the boundary of the target class defining the problem. Expansions and contractions of this geometrical structure are introduced in order to avoid over-fitting. Second, the decision whether a point belongs to the convex hull model in high dimensional spaces is approximated by means of random projections and an ensemble decision process. Finally, a tiling strategy is proposed in order to model non-convex structures. Experimental results show that the proposed strategy is significantly better than state of the art one-class classification methods on over 200 datasets.

Computer Analysis of Twin Box Culverts, 1959

The paper presents a method of analyzing Rigid Frames by use of the Conjugate Beam Theory. The development of the method along with an example is given. This method has been used to write a computer program for the analysis of twin box culverts. The culverts may be analyzed under any fill height and any of the standard truck loadings. The wall and slab thickness are increased by the computer program as necessary. The final result is steel requirements both for moment and shear, and the slab and wall thickness.

Reaction-diffusion lattice gas: Theory and computer results

We report on the study of nonequilibrium ordering in the reaction-diffusion lattice gas. It is a kinetic model that relaxes towards steady states under the simultaneous competition of a thermally activated creation-annihilation $(reaction$) process at temperature T, and a diffusion process driven by a heat bath at temperature T?T. The phase diagram as one varies T and T, the system dimension d, the relative priori probabilities for the two processes, and their dynamical rates is investigated. We compare mean-field theory, new Monte Carlo data, and known exact results for some limiting cases. In particular, no evidence of Landau critical behavior is found numerically when d=2 for Metropolis rates but Onsager critical points and a variety of first-order phase transitions.

Computer-simulation study of magnetic relaxation in anisotropic magnetic systems

We present a computer-simulation study of the effect of the distribution of energy barriers in an anisotropic magnetic system on the relaxation behavior of the magnetization. While the relaxation law for the magnetization can be approximated in all cases by a time logarithmic decay, the law for the dependence of the magnetic viscosity with temperature is found to be quite sensitive to the shape of the distribution of barriers. The low-temperature region for the magnetic viscosity never extrapolates to a positive no-null value. Moreover our computer simulation results agree reasonably well with some recent relaxation experiments on highly anisotropic single-domain particles.

Initial results on in vivo human coronary MR angiography at 7 T.

Seven tesla (T) MR imaging is potentially promising for the morphologic evaluation of coronary arteries because of the increased signal-to-noise ratio compared to lower field strengths, in turn allowing improved spatial resolution, improved temporal resolution, or reduced scanning times. However, there are a large number of technical challenges, including the commercial 7 T systems not being equipped with homogeneous body radiofrequency coils, conservative specific absorption rate constraints, and magnified sample-induced amplitude of radiofrequency field inhomogeneity. In the present study, an initial attempt was made to address these challenges and to implement coronary MR angiography at 7 T. A single-element radiofrequency transmit and receive coil was designed and a 7 T specific imaging protocol was implemented, including significant changes in scout scanning, contrast generation, and navigator geometry compared to current protocols at 3 T. With this methodology, the first human coronary MR images were successfully obtained at 7 T, with both qualitative and quantitative findings being presented.

Comparison of human and computer-based selective cleaning

Abstract

SiMR: A simulator for learning computer architecture

This paper presents SiMR, a simulator of the Rudimentary Machine designed to be used in a first course of computer architecture of Software Engineering and Computer Engineering programmes. The Rudimentary Machine contains all the basic elements in a RISC computer, and SiMR allows editing, assembling and executing programmes for this processor. SiMR is used at the Universitat Oberta de Catalunya as one of the most important resources in the Virtual Computing Architecture and Organisation Laboratory, since students work at home with the simulator and reports containing their work are automatically generated to be evaluated by lecturers. The results obtained from a survey show that most of the students consider SiMR as a highly necessary or even an indispensable resource to learn the basic concepts about computer architecture.

Computer-assisted two-dimensional preoperative planning for total hip arthroplasty: clinical evaluation.

The purpose of this study is to clinically validate a new two-dimensional preoperative planning software for cementless total hip arthroplasty (THA). Manual and two-dimensional computer-assisted planning were compared by an independent observer for each of the 30 patients with osteoarthritis who underwent THA. This study showed that there were no statistical differences between the results of both preoperative plans in terms of stem size and neck length (<1 size) and hip rotation center position (<5 mm). Two-dimensional computer-assisted preoperative planning provided successful results comparable to those using the manual procedure, thereby allowing the surgeon to simulate various stem designs easily.

Manipulació geomètrica dels blocs d'AutoCAD

Aquest text és un recull de procediments per inserir els blocs d'AutoCAD de forma més eficient, en la resolució de problemes prèviament tipificats: la PRIMERA PART descriu protocols d'actuació que l'usuari haurà d'aplicar manualment, mentre que la SEGONA PART ofereix rutines programades en AutoLISP i VisualLISP que l'eximiran d'aquesta obligació.Si ho deixéssim aquí, però, podria semblar que els mateixos mètodes manuals presentats en primer lloc són després els que AutoLISP automatitza; per això convé aclarir que la problemàtica de la PRIMERA PART, tot i que pròxima a la de la SEGONA, és diferent i reprodueix el contingut d'una monografia (BLOCS I GEOMETRIA: 5 EXERCICIS COMENTATS) que forma part del material de suport a l'assignatura ELEMENTS DE CAD, impartida per l'autor en l'ETS d'Enginyeria de Telecomunicació de Barcelona i que té per objecte cobrir el buit bibliogràfic que es detectava en el vessant geomètric de la inserció de blocs, a diferència del que s'ocupa de l'estructura de dades més adient en cada context (incrustació de dibuixos amb INSERT versus vinculació mitjançant REFX), més profusament tractat, proposant una sistematització tipològica dels casos on l'escala és funció lineal d'una distància.La SEGONA PART va més enllà i amplia el repertori d'AutoCAD amb les ordres GINSERT, RATREDIT, INSERTOK, INS2D, INS3D, BLOQUEOK, DESCOMPOK, DEF-TRANSF, APL-TRANSF-V i APL-TRANSF-N, de les quals INS2D i INS3D (INSERTOK és una versió simplificada de INS2D, per a blocs sense atributs) són l'aportació més innovadora i que més lluny porta les potencialitats de la inserció de blocs: resumint-ho en una frase, es tracta d’aconseguir que la inserció d’un bloc (que pot ser l’original, un bloc constituït per una inserció de l’original o un de constituït per la inserció del precedent) s’encabeixi en un marc prèviament establert, a semblança de les ordres ESCALA o GIRA, que mitjançant l'opció Referencia apliquen als objectes seleccionats la transformació d'escalat o de rotació necessària per tal que un element de referència assoleixi una determinada grandària o posició. Tot i que, per identificar amb encert el nucli del problema, serà inevitable introduir una reflexió: quan s’ha tingut la precaució de referir un bloc 2D a un quadrat unitari ortogonal, inserir-lo de manera que s’adapti a qualsevol marc rectangular establert en el dibuix és immediat, però ja no ho és tant concatenar insercions de manera que, a més d’una combinació simple de escalat, gir i translació, l’operació dugui implícita una transformació de cisallament. Perquè és clar que si inserim el bloc girat i convertim la inserció en un bloc que al seu torn tornem a inserir, ara però amb escalat no uniforme, el transformat del quadrat de referència primitiu serà un paral·lelogram, però el problema és: dibuixat un marc romboïdal concret, ¿quin gir caldrà donar a la primera inserció, i quin gir i factors d’escala caldrà aplicar a la segona perquè el quadrat de referència s’adapti al marc? El problema es complica si, a més, volem aprofitar el resultat de la primera inserció per a d’altres paral·lelograms, organitzant un sistema no redundant de insercions intermèdies. Doncs bé: INS2D i INS3D donen satisfacció a aquestes qüestions (la segona ja no contempla l'encaix en un paral·lelogram, sinó en un paral·lelepípede) i són aplicables a blocs proveïts d’atributs, no només de tipus convencional (els continguts en el pla de base del bloc, únics de funcionament garantit amb l’ordre INSERT), sinó també dels situats i orientats lliurement.

Computer-aided volume measurement of posttraumatic orbits reconstructed with AO titanium mesh plates: accuracy and reliability

PURPOSE: To prospectively evaluate the accuracy and reliability of "freehand" posttraumatic orbital wall reconstruction with AO (Arbeitsgemeinschaft Osteosynthese) titanium mesh plates by using computer-aided volumetric measurement of the bony orbits. METHODS: Bony orbital volume was measured in 12 patients from coronal CT scan slices using OsiriX Medical Image software. After defining the volumetric limits of the orbit, the segmentation of the bony orbital region of interest of each single slice was performed. At the end of the segmentation process, all regions of interest were grouped and the volume was computed. The same procedure was performed on both orbits, and thereafter the volume of the contralateral uninjured orbit was used as a control for comparison. RESULTS: In all patients, the volume data of the reconstructed orbit fitted that of the contralateral uninjured orbit with accuracy to within 1.85 cm3 (7%). CONCLUSIONS: This preliminary study has demonstrated that posttraumatic orbital wall reconstruction using "freehand" bending and placement of AO titanium mesh plates results in a high success rate in re-establishing preoperative bony volume, which closely approximates that of the contralateral uninjured orbit.

Nappe geometry in the Western Swiss Alps

Detailed geological mapping during the last 20 years in the Western Swiss Alps has shown clearly that most of the lower basement nappes are fold nappes possessing normal and inverted limbs. Moreover their cores are made of strongly deformed gneisses indicating that important ductile strain took place during the formation of the fold nappes. It is therefore probably wrong to imagine deep basement nappes as rigid slices as often actually claimed, especially when interpreting seismic profiles. True `brittle type' thrust nappes involving basement rocks only occur in the internal and upper parts of the belt. Cover nappes, on the contrary, are in most parts of the Alpine belt thrust sheets following more or less the rules of thin-skinned tectonics. Many basement fold nappes lost part of their sedimentary cover during or just before their formation, by decollement along ductile horizons. The result is that many cover thrust nappes in the external part of the Alps are directly related to their original basement fold nappes.

Computer-aided system for morphometric mandibular index computation (Using dental panoramic radiographs)

Objective: We propose and validate a computer aided system to measure three different mandibular indexes: cortical width, panoramic mandibular index and, mandibular alveolar bone resorption index. Study Design: Repeatability and reproducibility of the measurements are analyzed and compared to the manual estimation of the same indexes. Results: The proposed computerized system exhibits superior repeatability and reproducibility rates compared to standard manual methods. Moreover, the time required to perform the measurements using the proposed method is negligible compared to perform the measurements manually. Conclusions: We have proposed a very user friendly computerized method to measure three different morphometric mandibular indexes. From the results we can conclude that the system provides a practical manner to perform these measurements. It does not require an expert examiner and does not take more than 16 seconds per analysis. Thus, it may be suitable to diagnose osteoporosis using dental panoramic radiographs.