A new micro/nanoencapsulated porphyrin formulation for PDT treatment

The highly hydrophobic 5,10,15-triphenyl-20-(3-N-methylpyridinium-yl)porphyrin(3MMe)cationic species was synthesized, characterized and encapsulated in marine atelocollagen/xanthane gum microcapsules by the coacervation method. Further reduction in the capsule size, from several microns down to about 300-400 nm, was carried out successfully by ultrasonic processing in the presence of up to 1.6% Tween 20 surfactant, without affecting the distribution of 3MMe in the oily core. The resulting creamlike product exhibited enhanced photodynamic activity but negligible cytotoxicity towards HeLa cells. The polymeric micro/nanocapsule formulation was found to be about 4 times more phototoxic than the respective phosphatidylcholine lipidic emulsion, demonstrating high potentiality for photodynamic therapy applications. (C) 2009 Elsevier B.V. All rights reserved.

The effect of calcium salts on the viscosity and adsorption behavior of xanthan

The effect of CaCl(2), Ca(NO(3))(2), CaSO(4), CaCO(3) and Ca(3)(PO(4))(2) on the flow behavior of xanthan gum solutions was investigated. Regardless the concentration and type of calcium salt used, xanthan solutions presented pseudoplastic behavior. The soluble salts (CaCl(2) and Ca(NO(3))(2)) induced the disordered state in the xanthan chains at concentration of 1.0 g/L or 10 g/L, decreasing the flow consistency index (K) values. At 100 g/L soluble salts K values were similar to those found for pure xanthan solutions, whereas at the same concentration of insoluble particles the K values increased 20%. The adsorption of xanthan gum onto Si/SiO(2) surfaces in the presence of calcium salts was investigated by ellipsometry and atomic force microscopy (AFM). The adsorbed layer of xanthan onto Si/SiO(2) consisted of two regions: (i) a thin acid resistant sublayer, where xanthan chains were like highly entangled fibers and (ii) a thick upperlayer, whose morphology was calcium salt dependent. (C) 2010 Elsevier Ltd. All rights reserved.

Aplicações de instrumentação virtual em metrologia e qualidade

Com a evolução constante da tecnologia, também a ciência da medição, ou Metrologia, necessita de processos de medição mais exatos e fiáveis, por vezes automatizados, de modo a ser possível fornecer informações mais corretas sobre uma determinada grandeza física. Entre estas informações destaca-se a incerteza de medição, que permite ao utilizador ter uma estimativa sobre qual o valor final da grandeza física medida, que com processos de medição mais complexos, tornam a sua obtenção mais difícil, sendo necessário, por vezes, a utilização de métodos computacionais. Tendo isto em conta, com esta dissertação pretende-se abordar o problema da automatização de processos de medição, bem como da obtenção de incertezas de medição que reflitam a natureza da grandeza física medida através de métodos computacionais. De modo a automatizar um processo de medição, mais concretamente da calibração de manómetros, utilizou-se o LabView para criar um instrumento virtual que permitisse ao utilizador, de forma simples e intuitiva, realizar o procedimento de calibração. Também se realizou outro instrumento virtual, de modo a permitir a obtenção simultânea de dados provenientes de dois equipamentos diferentes. Relativamente às incertezas de medição, utilizou-se o Método de Monte Carlo, implementado em MATLAB e Excel, de modo a obter o valor destas para a calibração de manómetros, de uma câmara geradora de humidade relativa e de um higrómetro de ponto de orvalho, sendo que os dois últimos possuem um modelo matemático complexo, sendo a análise analítica mais complexa e morosa. Tendo em conta os resultados obtidos, é possível afirmar que a criação de instrumentação virtual permite a adaptação, de uma forma simples, de vários processos de medição, tornando-os mais eficientes para além de reduzirem o erro do operador. Por outro lado, também é possível observar que a utilização de métodos computacionais, neste caso o Método de Monte Carlo, para estudo de incertezas de medição é uma mais valia, comparativamente ao GUM, permitindo umaa análise rápida e fiável de modelos matemáticos complexos.

Integrated valorization of Anona Cherimola Mill. seeds

Agricultural and agro-industrial residues are often considered both an environmental and an economical problem. Therefore, a paradigm shift is needed, assuming residues as biorefinery feedstocks. In this work cherimoya (Annona cherimola Mill.) seeds, which are lipid-rich (ca. 30%) and have a significant lignocellulosic fraction, were used as an example of a residue without any current valorization. Firstly, the lipid fraction was obtained by solvent extraction. Extraction yield varied from 13% to 28%, according to the extraction method and time, and solvent purity. This oil was converted into biodiesel (by base-catalyzed transesterification), yielding 76 g FAME/100 g oil. The obtained biodiesel is likely to be incorporated in the commercial chain, according to the EN14214 standard. The remaining lignocellulosic fraction was subjected to two alternative fractionation processes for the selective recovery of hemicellulose, aiming different products. Empirical mathematical models were developed for both processes, aiming future scale-up. Autohydrolysis rendered essentially oligosaccharides (10 gL-1) with properties indicating potential food/feed/pharmacological applications. The remaining solid was enzymatically saccharified, reaching a saccharification yield of 83%. The hydrolyzate obtained by dilute acid hydrolysis contained mostly monosaccharides, mainly xylose (26 gL-1), glucose (10 gL-1) and arabinose (3 gL-1), and had low content of microbial growth inhibitors. This hydrolyzate has proven to be appropriate to be used as culture media for exopolisaccharide production, using bacteria or microbial consortia. The maximum conversion of monosaccharides into xanthan gum was 0.87 g/g and kefiran maximum productivity was 0.07 g.(Lh)-1. This work shows the technical feasibility of using cherimoya seeds, and materials as such, as potential feedstocks, opening new perspectives for upgrading them in the biorefinery framework.

Acesso aos serviços odontológicos e incidência de cárie em adolescentes e fatores de risco em município do Nordeste Brasileiro, 2006

The aims of this study were to analyze the access of dental services by child population, to determine the prevalence of dental caries, gingivitis and malocclusion in resident children from the municipal district of Sobral Ceará and to evaluate the incidence of the dental decay in adolescents associated with the factors related to socioeconomic condition, access to health services and self-perception. This study had as main factor the multidisciplinary represented by the participation of health professional (doctors, dentists, nurses) in the development of the survey's initial reference; student from Human Sciences area to apply the structured questionnaire in domiciliary visits; statistics professionals in the orientation of the analysis to be held and family health team (community health agents, dentists and dental clinic assistants) in the scheduling of domiciliary visits and the accomplishment of oral exam. The sample was determined from the domicile record that included children born between 1990 and 1994 to develop the research Children health conditions in the municipal district of Sobral Ceará . The first sample comprised 3425 parents of children from 5 to 9 years old, living in the urban area at the municipal district of Sobral Ceará, aiming at identifying the most important factors associated to the access to dental service. From this sample, 1021 children were selected in a systematic way, for the accomplishment to the epidemiological study of decay, gingivitis and malocclusion. In the study's third phase, in order to arrange the group to be followed, 688 adolescents were examined and interviewed, by means of the active search from the 1021 individuals that had been previously examined. It was observed that 50.9% of the children had access to dental service at least once in a lifetime. Of this total, 65.3% accomplished it during the last year, and 85.4% of these did in public services, what allows to identify the importance of this sector in the access to dental services. It was observed that the factors that most affected the access to dental 129 services were related to socioeconomic condition, such as the access to health plan, the possession of toothbrush, garbage collecting, mother s schooling, sewerage treatment and malnutrition. In relation to oral diseases, an increase in the DMF-T index according the age was observed, from 0.10 in five years old to 1.66 in the nine years old, while with the dmf-t index, the inverse happened, since the index decreased from 3.59 in five years old to 2.69 in nine years old. In relation to gingivitis, an average 32.7% of the children presented gum bleeding. In what concerns malocclusion, it was observed that 60.3% of the children didn't present any problem, 30.17% had light malocclusion and 9.5% severe malocclusion. The average incidence of dental caries was 1.86 teeth per youngster. Among the studied variables, tooth pain in the last six months, mother's income and school snack, adjusted by the perception about the need of treatment, the mother's schooling and the dentist's appointment at least once in a lifetime, were the variables that presented positive relationship with the high incidence of dental caries on this population by logistic regression. Variables of socioeconomic nature, related to the access to health services and behavior and biological variables presented a relationship with the high caries incidence. The study point out to the need of developing health actions in a humanized way, by an oral health team effectively bound to the population's interest, with the great objective to provide, with the public health services managers, adequate conditions to improve oral health

Câncer de boca e orofaringe: tendências e análise de sobrevida em Natal (RN)

Introduction: Mouth cancer is classified as having one of the ten highest cancer incidences in the world. In Brazil, the incidence and mortality rates of oral cancer are among the highest in the world. Intraoral cancer (tongue, gum, floor of the mouth, and other non-specified parts of the mouth), the accumulated survival rate after five years is less than 50%. Objectives: Estimate the accumulated survival probability after five years and adjust the Cox regression model for mouth and oropharyngeal cancers, according to age range, sex, morphology, and location, for the city of Natal. Describe the mortality and incidence coefficients of oral and oropharyngeal cancer and their tendencies in the city of Natal, between 1980 and 2001 and between 1997 and 2001, respectively. Methods: Survival data of patients registered between 1997 and 2001 was obtained from the Population-based Cancer Record of Natal. Differences between the survival curves were tested using the log-rank test. The Cox proportional risk model was used to estimate risk ratios. The simple linear regression model was used for tendency analyses of the mortality and incidence coefficients. Results: The probability after five years was 22.9%. The patients with undifferentiated malignant neoplasia were 4.7 times more at risk of dying than those with epidermoid carcinoma, whereas the patients with oropharyngeal cancer had 2.0 times more at risk of dying than those with mouth cancer. The mouth cancer mortality and incidence coefficients for Natal were 4.3 and 2.9 per 100 000 inhabitants, respectively. The oropharyngeal cancer mortality and incidence coefficients were, respectively, 1.1 and 0.7 per 100 000 87 inhabitants. Conclusions: A low survival rate after five years was identified. Patients with oropharyngeal cancer had a greater risk of dying, independent of the factors considered in this study. Also independent of other factors, undifferentiated malignant neoplasia posed a greater risk of death. The magnitudes of the incidence coefficients found are not considered elevated, whereas the magnitudes of the mortality coefficients are high

Ectoparasitos associados a aves de um fragmento de Floresta Estacional Decidual no Rio Grande do Norte, Brasil

This study to aimed investigate the community of ectoparasites associated with birds in the Mata do Olho D água, in the municipality of Macaíba, Rio Grande do Norte (RN), Brazil, its structure and the ambiental and hosts influential variables on it, and to verify microhabitats preferences by species of chewing lice and feather mites. We examined 172 individuals belonging to 38 species of Passeriformes and non-Passeriformes. 12 new geographic records are reported and 11 host-parasite associations not yet known for chewing lice and feather mites species. Significant relationship was found between the abundance of chewing lice and the variables total length (r = 0.29, p <0.05) and exposed culmen (r = 0.38, p <0.05) of the hosts. A principal component (PC1) accounted for 90.1% of the hosts morphological variation was significantly influential on the abundance of chewing lice (p <0.05), indicating that the morphological characteristics of the hosts may be positively influencing the abundance of these ectoparasites. Significantly higher frequency of individuals with high loads of chewing lice was detected during the dry period (x ² = 8.5, p <0.05), corroborating studies that propose that birds of arid environments suffer as much pressure as those of parasitic humid environments. Analyses of null models of co-occurrence and niche overlap showed a high degree of structure in the feather mites and chewing lice assemblies, when compared with other groups, and preferences in the use of microhabitats by taxa identified. These results corroborate ecological theories in host-parasite systems, contribute to the knowledge of ectoparasites associated with neotropical birds, and the need for experimental studies, as well as further deepening the biology of these arthropods

Caracterização de Diaporthe citri em diferentes meios de cultura, condições de temperatura e luminosidade

Estudou-se o crescimento micelial de dez isolados de Diaporthe citri, utilizando-se seis meios de cultura (aveia-ágar, maltose-peptona-ágar, batata-dextrose-ágar, folha de laranja-dextrose-ágar, folha de limão-dextrose-ágar, milho-ágar) à temperatura de 22 ± 2 °C e fotoperíodo de 12 h claro/12 h escuro. O cultivo em meio de batata-dextrose-ágar (BDA) foi conduzido em cinco temperaturas diferentes (10, 15, 20, 25 e 30 °C). Três diferentes regimes de luminosidade (12 h claro/12 h escuro, claro contínuo, escuro contínuo) foram utilizados para verificar o crescimento do fungo. Foram observadas variações na produção de picnídios e de massa micelial nos diferentes meios de cultura, temperaturas e regimes de luminosidade testados, sendo que, para a maioria dos isolados, o meio de cultura de aveia-ágar, a faixa de 20 a 25 °C e o regime de claro contínuo induziram maior crescimento micelial. A produção de picnídios foi maior para o regime de luz contínua. O teste de patogenicidade foi feito por inoculação de discos de micélio de 5 mm de diâmetro em ferimentos em ramos e caule de limão 'Feminelo' (Citrus limon) enxertado em citrumelo 'Swingle'(Poncirus trifoliolata x Citrus paradisi) e plantas de limão 'Cravo' (C. limonia) enxertados com laranja 'Valência' (C. sinensis). Após sete dias, houve o aparecimento de exsudação de goma nas plantas inoculadas com os isolados, mas não na testemunha. Todos os isolados mostraram-se patogênicos, sendo os isolados PC2 e PC5, os que causaram comprimento de lesão maior nas plantas.

Whole-genome expression profiling of Xylella fastidiosa in response to growth on glucose

Xylella fastidiosa is the etiologic agent of diseases in a wide range of economically important crops including citrus variegated chlorosis, a major threat to the Brazilian citrus industry. The genomes of several strains of this phytopathogen have been completely sequenced enabling large-scale functional studies. In this work we used whole-genome DNA microarrays to investigate the transcription profile of X. fastidiosa grown in defined media with different glucose concentrations. Our analysis revealed that while transcripts related to fastidian gum production were unaffected, colicin-V-like and fimbria precursors were induced in high glucose medium. Based on these results, we suggest a model for colicin-defense mechanism in X. fastidiosa.

Dinâmica populacional do psilídeo-de-concha Glycaspis brimblecombei (Moore, 1964) (Hemiptera: Psyllidae) e de seu parasitóide Psyllaephagus bliteus (Hymenoptera: Encyrtidae) em floresta de Eucalyptus camaldulensis

O psilídeo-de-concha, Glycaspis brimblecombei, é uma praga exótica específica de Eucalyptus, que causa desfolha, secamento de ponteiros e ramos, podendo levar as árvores à morte. O parasitóide Psyllaephagus bliteus é indicado como principal agente no controle biológico desta praga. Portanto, o monitoramento adequado de as ambas espécies por um método eficiente de amostragem facilitaria o manejo para uma futura tomada de decisão. Devido à falta de informações referentes ao seu comportamento em plantações extensivas de eucalipto no Brasil, este trabalho teve como objetivo estudar as populações de G. brimblecombei e de P. bliteus em florestas de Eucalyptus camaldulensis, utilizando armadilhas amarelas para determinação de sua flutuação populacional e correlacionado-as com variáveis meteorológicas (temperatura e precipitação). A determinação da flutuação populacional (53 pontos amostrais) foi realizada em talhão de 19ha com E. camaldulensis em Luíz Antônio, SP, em 10avaliações quinzenais, entre janeiro e junho de 2005. As populações de ambas as espécies apresentaram correlação inversamente proporcional em função da temperatura e não há correlação com a precipitação no período avaliado.

Biologia do psilídeo-de-concha Glycaspis brimblecombei Moore (Hemiptera, Psyllidae) em Eucalyptus spp.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização da Estrutura Espacial do Psilídeo-de-concha Glycaspis brimblecombei (Hemiptera: Psyllidae) e de seu Parasitóide Psyllaephagus bliteus (Hymenoptera: Encyrtidae) em Floresta de Eucalyptus camaldulensis

Os psilídeos são um grupo de pragas amplamente distribuídas, causando perdas consideráveis em sistemas agrícolas e florestais. A recente descoberta da ocorrência do psilídeo-de-concha Glycaspis brimblecombei Moore (Hemiptera: Psyllidae), no Brasil tornou-se um problema de grande importância, por ser específico de Eucalyptus. O parasitóide Psyllaephagus bliteus Riek (Hymenoptera: Encyrtidae) é indicado como principal agente no controle biológico desta praga. Portanto, para o monitoramento adequado de ambas espécies é necessário um método eficiente de amostragem. Devido a falta de informações referentes ao seu comportamento em plantações extensivas de eucalipto, realizou-se este trabalho, para verificar a distribuição espacial de G. brimblecombei e de seu parasitóide P. bliteus, através de armadilhas adesivas em floresta de E. camaldulensis. Para determinação da distribuição espacial foram utilizadas 53 armadilhas amarelas distribuídas uniformemente no talhão, formando uma grade amostral espaçadas de 50 x 36 m, à altura aproximada de 1,80 m do solo. Cada armadilha foi presa com auxílio de um arame plastificado em um fio estendido entre duas árvores em um talhão de 19 ha com E. camaldulensis em Luiz Antônio, SP. Foram realizadas dez avaliações, entre janeiro e junho de 2005. Após a coleta as armadilhas foram levadas ao laboratório para ser feita à triagem e contagem do número total de adultos de G. brimblecombei e de P. bliteus, nas duas faces das armadilhas. Concluiu-se que as populações de ambas espécies apresentaram distribuição espacial agregada, no período avaliado.

Ocorrência e Distribuiçao populacional do psilídeo-de-concha Glycaspis brimblecombei Moore 1964, (Hemiptera: Psyllidae) em Floresta de Eucalipto no Litoral Norte do Estado da Bahia, Brasil

Australian origin, Glycaspis brimblecombei has become an important pest for the cultivation of eucalyptus in Brazil. causing major damages. The first report of the red gum lerp psyllid was conducted in june 2003, in São Paulo State, Brazil. In November 2008, was observed in the North coast of Bahia State, damaging Eucalyptus spp. In may 2009, we evaluated the intensity of attack on 708 hectares, planted with different hybrids of Eucalyptus, divided into 25 plots, in which it was found that 48% of the plots were infested with less than one nymph per leaf, 48% with one to three nymphs per leaf, and 4% with four to six nymphs per leaf.

Obtenção e caracterização de extrato microencapsulado de resíduo agroindustrial de acerola

Acerola (Malpighia emarginata D.C.) is a red fruit widely cultivated in Brazil, especially in the Northeastern region. Its increasing demand is attributed to its high ascorbic acid contents. Besides ascorbic acid, widely known by its health-benefit effects, acerola is rich in anthocyanins, which contribute for the antioxidant power of the fruit. Acerola processing produces a bright-red pomace, usually discarded. The further processing of this pomace, in order to explore its antioxidant compounds, could enhance acerola market value and rentability of its processing. Both ascorbic acid and anthocyanins are highly susceptible to degradation, that can be delayed by microencapsulation, which consists on packing particles (core) in an edible matrix (wall material). This work has been made with the purpose of producing a microencapsulated acerola pomace extract, which could be used by the food industry as a functional ingredient with antioxidant and coloring properties. Antioxidant compounds were recovered by pressing the pomace diluted in a solvent (a citric acid aqueous solution), by using a central composite design, with two variables: citric acid concentration in the solvent (0-2%), and solvent: pomace mass ratio (2:1-6:1). The acerola pomace extract was then microencapsulated by spray drying. A central composite design was adopted, with three variables: inlet temperature of the spray dryer (170o-200oC), wall material: acerola solids mass ratio (2:1-5:1), and degree of maltodextrin replacement by cashew tree gum as wall material (0-100%). The cashew tree gum was used because of its similarity to arabic gum, which is regarded as the wall material by excellence. The following conditions were considered as optimal for extraction of anthocyanins and ascorbic acid: solvent/pomace ratio, 5:1, and no citric acid in the solvent. 82.47% of the anthocyanins were recovered, as well as 83.22% of the ascorbic acid. Anthocyanin and ascorbic acid retentions were favored by lower inlet temperatures, higher wall material: acerola solids mass ratio and higher maltodextrin replacement by cashew tree gum, which was presented as a promising wall material. The more adequate microencapsulation conditions, based not only on retention of antioxidant compounds but also on physical properties of the final powder, were the following: inlet temperature, 185oC; wall material: acerola solids mass ratio, 5:1, and minimum degree of maltodextrin replacement by cashew tree gum, 50%

Avaliação e modelagem reológica de fluido de perfuração base água

The determination of the rheology of drilling fluids is of fundamental importance to select the best composition and the best treatment to be applied in these fluids. This work presents a study of the rheological behavior of some addictives used as viscosifiers in water-based drilling fluids. The evaluated addictives were: Carboxymethylcellulose (CMC), Xanthan gum (GX), and Bentonite. The main objective was to rheologically characterize suspensions composed by these addictives, by applying mathematical models for fluid flow behavior, in order to determine the best flow equation to represent the system, as well as the model parameters. The mathematical models applied in this research were: the Bingham Model, the Ostwald de Wale Model, and the Herschel-Bulkley Model. A previous study of hydration time for each used addictive was accomplished seeking to evaluate the effect of polymer and clay hydration on rheological behavior of the fluid. The rheological characterization was made through typical rheology experiments, using a coaxial cylinder viscosimeter, where the flow curves and the thixotropic magnitude of each fluid was obtained. For each used addictive the rheological behavior as a function of temperature was also evaluated as well as fluid stability as a function of the concentration and kind of addictive used. After analyses of results, mixtures of polymer and clay were made seeking to evaluate the rheological modifications provided by the polymer incorporation in the water + bentonite system. The obtained results showed that the Ostwald de Waale model provided the best fit for fluids prepared using CMC and for fluids with Xanthan gum and Bentonite the best fit was given by the Herschel-Bulkley one