728 resultados para Cerâmica eletrônica


Relevância:

20.00% 20.00%

Publicador:

Resumo:

A manutenção da integridade das membranas celulares, entre outros eventos, é um forte indicativo de que a qualidade do café foi preservada na pós-colheita. Objetivou-se neste trabalho, analisar o efeito de diferentes métodos de secagem na manutenção da integridade da parede celular e da membrana plasmática de café natural e café despolpado, buscando determinar as condições e o momento em que ocorrem as rupturas microscópicas. Os cafés foram submetidos a um período de pré-secagem em terreiro. Após este, uma parcela de cada tipo de café foi desidratada no terreiro e, outra, à temperatura de 40ºC e 60ºC em secadores de camada fixa, monitorando-se a temperatura e o teor de água até 11% (bu). Nesse período, grãos foram aleatoriamente amostrados e fragmentos do endosperma preparados para a microscopia eletrônica de varredura, registrando-se diversas eletromicrografias, avaliando-se as alterações na membrana plasmática da célula do endosperma dos grãos de cafés em função do teor de água e tempo de secagem. O citoplasma das células a 11% (bu) de teor de água não foi comprometido na secagem em terreiro e a 40°C; na secagem a 60°C, observou-se comprometimento nas estruturas celulares nos cafés com teor de água de 20% (bu).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This paper studied the morphology of oocytes of Brycon orbignyanus, (Osteichthyes, Characidae), through observation in Scanning Electron Microscopy (SEM). Fragments of the ovaries from adult females were collected. During the reproductive period, a hormonal induction in females was carried out to collect the oocytes after extrusion. The samples were fixed and processed for observation in SEM. Results showed that the oocytes of B. orbignyanus had a follicular epithelium formed by a single layer of cells with compressed shape, covering the whole radiatta zone that showed a smooth and regular surface with innumerable pores. The micropyle had a funnel-shaped, containing several furrows. The oocyte surface around the micropyle presented pores closer of each other than the other surface areas of radiatta zone.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this study Candida albicans biofilm formation on the surface of commercially pure titanium (cp-Ti) coated with hydroxyapatite was observed by means of scanning electron microscope. The biofilm was formed after 45 days of incubation of the samples in liquid culture medium inoculated with fungus cells in a tube of polystyrene with screw cap and sterilized. After the biofilm removal with 10% EDTA solution was observed pitting on the surface of cp-Ti coated.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Purpose: To evaluate and correlate in the rabbit the possible changes caused by mitomycin C under the scleral flap in the ciliary epithelium with transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Methods: The eyes of 32 albino rabbits were studied and divided in 4 experimental groups. The right eye (RE) was intended for the experimental groups and the left eye (LE) for the controls. Group I (G1) was formed by 8 eyes that received 0,5 mg/ml of mitomycin C under the scleral flap and were examined after 15 days. Group II (G2) differed from G1 only in the time of the exam, after 30 days. Group III (G3) was formed by 8 eyes that received 0,2 mg/ml of mitomycin C under the scleral flap and were examined after 15 days. Group IV (G4) differed from group 3 just in the time of the exam, after 30 days. In each eye the internal ciliary epithelium were examined with TEM. Results: The following changes in the internal ciliary epithelium were observed in groups G2, G3, and G4 with TEM: discontinuous and irregular basement membrane, more irregular and electron-dense nucleous, enlargement among interdigitation, edematous mitochondria and myelin figures. These alterations were not found in all the animals of the groups. Group G 1 did not present alterations. Roughness in groups G 1, G2, G3 and G4 were observed with SEM. In groups G 1 and G2 continuity solutions were also observed. Conclusion: Mitomycin C in 0,2 mg/ml and 0,5 mg/ml concentrations caused changes in the internal ciliary epithelium 15 and 30 days after, with TEM and SEM. There was no correlation between dosage, time and with TEM and SEM.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The region of Alfenas, in the state of Minas Gerais, Brazil, is predominantly constituted of Pre-Cambrian rocks with well developed alteration profiles in association with colluvial and alluvial sediments. No study to date has examined in detail its potential use in the ceramic industry. The scarce knowledge of its mineralogical and technological properties limits its value and consequently its industrial use. Until now, these clay materials have been used in a rudimental manner, in small scale in the fabrication of red tiles. The present study aimed at analyzing these clays mineralogically (X-ray diffraction), chemically (major and minor elements by X-ray fluorescence and organic carbon analysis) and technologically (pressing granulometric distribution; mechanical resistence; water absorption, apparent porosity; linear firing shrinkage; color of firing and others) in order to better understand the raw material and develop adequate technological applications. The best results of ceramic properties were the samples with higher organic content (more plastic clays) and higher values of Al2O3 (kaolinite and gibbsite) and Fe2O3 as well lower SiO2 content and finer grain size which contribute to a better sinterization.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objective: To evaluate the influence of different air abrasion protocols on the surface roughness of an yttria-stabilized polycrystalline tetragonal zirconia) (Y-TZP) ceramic, as well as the surface topography of the ceramic after the treatment. Method: Fifty-four specimens (7.5×4×7.5mm) obtained from two ceramic blocks (LAVA, 3M ESPE) were flattened with fine-grit sandpaper and subjected to sintering in the ceramic system's specific firing oven. Next, the specimens were embedded in acrylic resin and the surfaces to be treated were polished in a polishing machine using sandpapers of decreasing abrasion (600- to 1,200-grit) followed by felt discs with 10μm and 3μm polishing pastes and colloidal silica. The specimens were then randomly assigned to 9 groups, according to factors particle and pressure(n=6): Gr1- control; Gr2- Al 2O 3(50μm)/2.5 bar; Gr3- Al 2O 3(110μm)/2.5 bar; Gr4- SiO 2(30μm)/2.5 bar; Gr5- SiO 2(30μm)/2.5 bar; Gr6- Al 2O 3(50μm)/3.5 bar; Gr7- Al2O3(110μm)/3.5 bar; Gr8- SiO 2(30μm)/3.5 bar; Gr9- SiO 2(30μm)/3.5 bar. After treatments, surface roughness was analyzed by a digital optical profilometer and the morphology was examined by scanning electron microscopy (SEM). Data (μm) were subjected to statistical analysis by Dunnett's test (5%), two-way ANOVA and Tukey's test (5%). Results: The type of particle (p=0.0001) and the pressure (p=0.0001) used in the air abrasion protocols influenced the surface roughness values among the experimental groups (ANOVA). The mean surface roughness values (μm) obtained for the experimental groups (Gr2 to Gr9) were, respectively: 0.37 D; 0.56 BC; 0.46 BC; 0.48 CD; 0.59 BC; 0.82 A; 0.53B CD; 0.67 AB. The SEM analysis revealed that Al 2O 3, regardless of the particle size and pressure used, caused damage to the surface of the specimens, as it produced superficial damages on the ceramic, in the form of grooves and cracks. Conclusion: Al2O3 (110 μm/3.5 bar) air abrasion promoted the highest surface roughness on the ceramics, but it does not mean that this protocol promotes better ceramic-cement union compared to the other air abrasion protocols.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The irrigation scheduling is basically the adoption of pre-established criteria to define the time and the amount of water to be applied through irrigation systems. Hence, the objective of this work was to develop and test a spreadsheet of easy comprehension, handling and interpretation by growers, which uses as inputs the physical-hydric soil attributes and tensiometer readings to the determination of irrigation depth and time. The spreadsheet enables the grower to make reading and to know in a fast way how much water to apply into the soil. The test of the spreadsheet was performed in an irrigated orchard of grapevines in Petrolina, State of Pernambuco, Brazil. Soil water retention curves and tensiometer readings from the effective rooting depth were used as a basis for obtaining the soil water matric potential, soil water content, water availability, soil water content to be replaced, net and gross irrigation depth and irrigation time. The analysis of the use of the irrigation scheduling spreadsheet resulted in a shorter time for irrigation in relation to the irrigation scheduling based only on the crop evapotranspiration. The spreadsheet can be helpful to growers adjust irrigation depth when irrigation scheduling is based only on crop evapotranspiration.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Artes - IA

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Artes - IA

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Elétrica - FEIS

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)