Importance of footing-soil separation on dynamic stiffness of piled embedded footings

[EN]Different phenomena such a soil consolidation, erosion, and scour beneath an embedded footing supported on piles may lead to loss of contact between soil and the pile cap underside. The importance of this separation on the dynamic stiffness and damping of the foundation is assessed in this work.

3-D Boundary element-finite element method for the dynamic analysis of piled buildings.

[EN]A boundary element-finite element model is presented for the three-dimensional dynamic analysis of piled buildings in the frequency domain. Piles are modelled as compressible Euler-Bernoulli beams founded on a linear, isotropic, viscoelastic, zoned-homogeneous, unbounded layered soil, while multi-storey buildings are assumed to be comprised of vertical compressible piers and rigid slabs.

Influence of pile inclination angle on the dynamic properties and seismic response of piled structures.

[EN] This paper aims to contribute to clarify whether the use of battered piles has a positive or negative influence on the dynamic response of deep foundations and superstructures. For this purpose, the dynamic response of slender and non-slender structures supported on several configurations of 2X2 and 3X3 pile groups including battered elements is obtained through a procedure based on a substructuring model whick takes soil-structure interaction into account.

Sistemi per la climatizzazione mediante pompe di calore geotermiche e pali energetici

We need a large amount of energy to make our homes pleasantly warm in winter and cool in summer. If we also consider the energy losses that occur through roofs, perimeter walls and windows, it would be more appropriate to speak of waste than consumption. The solution would be to build passive houses, i.e. buildings more efficient and environmentally friendly, able to ensure a drastic reduction of electricity and heating bills. Recently, the increase of public awareness about global warming and environmental pollution problems have “finally” opened wide possibility in the field of sustainable construction by encouraging new renewable methods for heating and cooling space. Shallow geothermal allows to exploit the renewable heat reservoir, present in the soil at depths between 15 and 20 m, for air-conditioning of buildings, using a ground source heat pump. This thesis focuses on the design of an air-conditioning system with geothermal heat pump coupled to energy piles, i.e. piles with internal heat exchangers, for a typical Italian-family building, on the basis of a geological-technical report about a plot of Bologna’s plain provided by Geo-Net s.r.l. The study has involved a preliminary static sizing of the piles in order to calculate their length and number, then the project was completed making the energy sizing, where it has been verified if the building energy needs were met with the static solution obtained. Finally the attention was focused on the technical and economical validity compared to a traditional system (cost-benefit analysis) and on the problem of the uncertainty data design and their effects on the operating and initial costs of the system (sensitivity analysis). To evaluate the performance of the thermal system and the potential use of the piles was also used the PILESIM2 software, designed by Dr. Pahud of the SUPSI’s school.

Aldo Rossi, autobiografia scientifica: scrittura come progetto. Indagine critica tra scrittura e progetto di architettura

«In altri termini mi sfuggiva e ancora oggi mi sfugge gran parte del significato dell’evoluzione del tempo; come se il tempo fosse una materia che osservo dall’esterno. Questa mancanza di evoluzione è fonte di alcune mie sventure ma anche mi appartiene con gioia.» Aldo Rossi, Autobiografia scientifica. The temporal dimension underpinning the draft of Autobiografia scientifica by Aldo Rossi may be referred to what Lucien Lévy-Bruhl, the well-known French anthropologist, defines as “primitive mentality” and “prelogical” conscience : the book of life has lost its page numbers, even punctuation. For Lévy-Bruhl, but certainly for Rossi, life or its summing up becomes a continuous account of ellipses, gaps, repetitions that may be read from left to right or viceversa, from head to foot or viceversa without distinction. Rossi’s autobiographical writing seems to accept and support the confusion with which memories have been collected, recording them after the order memory gives them in the mental distillation or simply according to the chronological order in which they have happened. For Rossi, the confusion reflects the melting of memory elements into a composite image which is the result of a fusion. He is aware that the same sap pervades all memories he is going to put in order: each of them has got a common denominator. Differences have diminished, almost faded; the quick glance is prevalent over the distinction of each episode. Rossi’s writing is beyond the categories dependent on time: past and present, before and now. For Rossi, the only repetition – the repetition the text will make possible for an indefinite number of times – gives peculiarity to the event. As Gilles Deleuze knows, “things” may only last as “singleness”: more frequent the repetition is, more singular is the memory phenomenon that recurs, because only what is singular magnifies itself and happens endlessly forever. Rossi understands that “to raise the first time to nth forever”, repetition becomes glorification . It may be an autobiography that, celebrating the originality, enhances the memory event in the repetition; in fact it greatly differs from the biographical reproduction, in which each repetition is but a weaker echo, a duller copy, provided with a smaller an smaller power in comparison with the original. Paradoxically, for Deleuze the repetition asserts the originality and singularity of what is repeated. Rossi seems to share the thought expressed by Kierkegaard in the essay Repetition: «The hope is a graceful maiden slipping through your fingers; the memory of an elderly woman, indeed pretty, but never satisfactory if necessary; the repetition is a loved friend you are never tired of, as it is only the new to make you bored. The old never bores you and its presence makes you happy [...] life is but a repetition [...] here is the beauty of life» . Rossi knows well that repetition hints at the lasting stability of cosmic time. Kierkegaard goes on: «The world exists, and it exists as a repetition» . Rossi devotes himself, on purpose and in all conscience, to collect, to inventory and «to review life», his own life, according to a recovery not from the past but of the past: a search work, the «recherche du temps perdu», as Proust entitled his masterpiece on memory. If you want the past time to be not wasted, you must give it presence. «Memoria e specifico come caratteristiche per riconoscere se stesso e ciò che è estraneo mi sembravano le più chiare condizioni e spiegazioni della realtà. Non esiste uno specifico senza memoria, e una memoria che non provenga da un momento specifico; e solo questa unione permette la conoscenza della propria individualità e del contrario (self e non-self)» . Rossi wants to understand himself, his own character; it is really his own character that requires to be understood, to increase its own introspective ability and intelligence. «Può sembrare strano che Planck e Dante associno la loro ricerca scientifica e autobiografica con la morte; una morte che è in qualche modo continuazione di energia. In realtà, in ogni artista o tecnico, il principio della continuazione dell’energia si mescola con la ricerca della felicità e della morte» . The eschatological incipit of Rossi’s autobiography refers to Freud’s thought in the exact circularity of Dante’s framework and in as much exact circularity of the statement of the principle of the conservation of energy: in fact it was Freud to connect repetition to death. For Freud, the desire of repetition is an instinct rooted in biology. The primary aim of such an instinct would be to restore a previous condition, so that the repeated history represents a part of the past (even if concealed) and, relieving the removal, reduces anguish and tension. So, Freud ask himself, what is the most remote state to which the instinct, through the repetition, wants to go back? It is a pre-vital condition, inorganic of the pure entropy, a not-to-be condition in which doesn’t exist any tension; in other words, Death. Rossi, with the theme of death, introduces the theme of circularity which further on refers to the sense of continuity in transformation or, in the opposite way, the transformation in continuity. «[...] la descrizione e il rilievo delle forme antiche permettevano una continuità altrimenti irripetibile, permettevano anche una trasformazione, una volta che la vita fosse fermata in forme precise» . Rossi’s attitude seems to hint at the reflection on time and – in a broad sense – at the thought on life and things expressed by T.S. Eliot in Four Quartets: «Time present and time past / Are both perhaps present in time future, / And time future is contained in time past. / I all time is eternally present / All time is unredeemable. / What might have been is an abstraction / Remaining perpetual possibility / Only in a word of speculation. / What might have been and what has been / Point to one end, which is always present. [...]» . Aldo Rossi’s autobiographical story coincides with the description of “things” and the description of himself through the things in the exact parallel with craft or art. He seems to get all things made by man to coincide with the personal or artistic story, with the consequent immediate necessity of formulating a new interpretation: the flow of things has never met a total stop; all that exists nowadays is but a repetition or a variant of something existing some time ago and so on, without any interruption until the early dawnings of human life. Nevertheless, Rossi must operate specific subdivisions inside the continuous connection in time – of his time – even if limited by a present beginning and end of his own existence. This artist, as an “historian” of himself and his own life – as an auto-biographer – enjoys the privilege to be able to decide if and how to operate the cutting in a certain point rather than in another one, without being compelled to justify his choice. In this sense, his story is a matter very ductile and flexible: a good story-teller can choose any moment to start a certain sequence of events. Yet, Rossi is aware that, beyond the mere narration, there is the problem to identify in history - his own personal story – those flakings where a clean cut enables the separation of events of different nature. In order to do it, he has to make not only an inventory of his own “things”, but also to appeal to authority of the Divina Commedia started by Dante when he was 30. «A trent’anni si deve compiere o iniziare qualcosa di definitivo e fare i conti con la propria formazione» . For Rossi, the poet performs his authority not only in the text, but also in his will of setting out on a mystical journey and handing it down through an exact descriptive will. Rossi turns not only to the authority of poetry, but also evokes the authority of science with Max Plank and his Scientific Autobiography, published, in Italian translation, by Einaudi, 1956. Concerning Planck, Rossi resumes an element seemingly secondary in hit account where the German physicist «[...] risale alle scoperte della fisica moderna ritrovando l’impressione che gli fece l’enunciazione del principio di conservazione dell’energia; [...]» . It is again the act of describing that links Rossi to Planck, it is the description of a circularity, the one of conservation of energy, which endorses Rossi’s autobiographical speech looking for both happiness and death. Rossi seems to agree perfectly to the thought of Planck at the opening of his own autobiography: «The decision to devote myself to science was a direct consequence of a discovery which was never ceased to arouse my enthusiasm since my early youth: the laws of human thought coincide with the ones governing the sequences of the impressions we receive from the world surrounding us, so that the mere logic can enable us to penetrate into the latter one’s mechanism. It is essential that the outer world is something independent of man, something absolute. The search of the laws dealing with this absolute seems to me the highest scientific aim in life» . For Rossi the survey of his own life represents a way to change the events into experiences, to concentrate the emotion and group them in meaningful plots: «It seems, as one becomes older. / That the past has another pattern, and ceases to be a mere sequence [...]» Eliot wrote in Four Quartet, which are a meditation on time, old age and memory . And he goes on: «We had the experience but missed the meaning, / And approach to the meaning restores the experience / In a different form, beyond any meaning [...]» . Rossi restores in his autobiography – but not only in it – the most ancient sense of memory, aware that for at least 15 centuries the Latin word memoria was used to show the activity of bringing back images to mind: the psychology of memory, which starts with Aristotele (De Anima), used to consider such a faculty totally essential to mind. Keith Basso writes: «The thought materializes in the form of “images”» . Rossi knows well – as Aristotele said – that if you do not have a collection of mental images to remember – imagination – there is no thought at all. According to this psychological tradition, what today we conventionally call “memory” is but a way of imagining created by time. Rossi, entering consciously this stream of thought, passing through the Renaissance ars memoriae to reach us gives a great importance to the word and assumes it as a real place, much more than a recollection, even more than a production and an emotional elaboration of images.

Functional polymer coatings — My-Patterning and My-Analysis

In dieser Arbeit werden Strukturen beschrieben, die mit Polymeren auf Oberflächen erzeugt wurden. Die Anwendungen reichen von PMMA und PNIPAM Polymerbürsten, über die Restrukturierung von Polystyrol durch Lösemittel bis zu 3D-Strukturen, die aus PAH/ PSS Polyelektrolytmultischichten bestehen. Im ersten Teil werden Polymethylmethacrylat (PMMA) Bürsten in der ionischen Flüssigkeit 1-Butyl-3-Methylimidazolium Hexafluorophospat ([Bmim][PF6]) durch kontrollierte radikalische Polymerisation (ATRP) hergestellt. Kinetische Untersuchungen zeigten ein lineares und dichtes Bürstenwachstum mit einer Wachstumsrate von 4600 g/mol pro nm. Die durchschnittliche Pfropfdichte betrug 0.36 µmol/m2. Als Anwendung wurden Mikrotropfen bestehend aus der ionischen Flüssigkeit, Dimethylformamid und dem ATRP-Katalysator benutzt, um in einer definierten Geometrie Polymerbürsten auf Silizium aufzubringen. Auf diese Weise lässt sich eine bis zu 13 nm dicke Beschichtung erzeugen. Dieses Konzept ist durch die Verdampfung des Monomers Methylmethacrylat (MMA) limitiert. Aus einem 1 µl großen Tropfen aus ionischer Flüssigkeit und MMA (1:1) verdampft MMA innerhalb von 100 s. Daher wurde das Monomer sequentiell zugegeben. Der zweite Teil konzentriert sich auf die Strukturierung von Oberflächen mit Hilfe einer neuen Methode: Tintendruck. Ein piezoelektrisch betriebenes „Drop-on-Demand“ Drucksystem wurde verwendet, um Polystyrol mit 0,4 nl Tropfen aus Toluol zu strukturieren. Die auf diese Art und Weise gebildeten Mikrokrater können Anwendung als Mikrolinsen finden. Die Brennweite der Mikrolinsen kann über die Anzahl an Tropfen, die für die Strukturierung verwendet werden, eingestellt werden. Theoretisch und experimentell wurde die Brennweite im Bereich von 4,5 mm bis 0,21 mm ermittelt. Der zweite Strukturierungsprozess nutzt die Polyelektrolyte Polyvinylamin-Hydrochlorid (PAH) und Polystyrolsulfonat (PSS), um 3D-Strukturen wie z.B. Linien, Schachbretter, Ringe, Stapel mit einer Schicht für Schicht Methode herzustellen. Die Schichtdicke für eine Doppelschicht (DS) liegt im Bereich von 0.6 bis 1.1 nm, wenn NaCl als Elektrolyt mit einer Konzentration von 0,5 mol/l eingesetzt wird. Die Breite der Strukturen beträgt im Mittel 230 µm. Der Prozess wurde erweitert, um Nanomechanische Cantilever Sensoren (NCS) zu beschichten. Auf einem Array bestehend aus acht Cantilevern wurden je zwei Cantilever mit fünf Doppelschichten PAH/ PSS und je zwei Cantilever mit zehn Doppelschichten PAH/ PSS schnell und reproduzierbar beschichtet. Die Massenänderung für die individuellen Cantilever war 0,55 ng für fünf Doppelschichten und 1,08 ng für zehn Doppelschichten. Der daraus resultierende Sensor wurde einer Umgebung mit definierter Luftfeuchtigkeit ausgesetzt. Die Cantilever verbiegen sich durch die Ausdehnung der Beschichtung, da Wasser in das Polymer diffundiert. Eine maximale Verbiegung von 442 nm bei 80% Luftfeuchtigkeit wurde für die mit zehn Doppelschichten beschichteten Cantilever gefunden. Dies entspricht einer Wasseraufnahme von 35%. Zusätzlich konnte aus den Verbiegungsdaten geschlossen werden, dass die Elastizität der Polyelektrolytmultischichten zunimmt, wenn das Polymer gequollen ist. Das thermische Verhalten in Wasser wurde im nächsten Teil an nanomechanischen Cantilever Sensoren, die mit Poly(N-isopropylacrylamid)bürsten (PNIPAM) und plasmapolymerisiertem N,N-Diethylacrylamid beschichtet waren, untersucht. Die Verbiegung des Cantilevers zeigte zwei Bereiche: Bei Temperaturen kleiner der niedrigsten kritischen Temperatur (LCST) ist die Verbiegung durch die Dehydration der Polymerschicht dominiert und bei Temperaturen größer der niedrigsten kritischen Temperatur (LCST) reagiert der Cantilever Sensor überwiegend auf Relaxationsprozesse innerhalb der kollabierten Polymerschicht. Es wurde gefunden, dass das Minimum in der differentiellen Verbiegung mit der niedrigsten kritischen Temperatur von 32°C und 44°C der ausgewählten Polymeren übereinstimmt. Im letzten Teil der Arbeit wurden µ-Reflektivitäts- und µ-GISAXS Experimente eingeführt als neue Methoden, um mikrostrukturierte Proben wie NCS oder PEM Linien mit Röntgenstreuung zu untersuchen. Die Dicke von jedem individuell mit PMMA Bürsten beschichtetem NCS ist im Bereich von 32,9 bis 35,2 nm, was mit Hilfe von µ-Reflektivitätsmessungen bestimmt wurde. Dieses Ergebnis kann mit abbildender Ellipsometrie als komplementäre Methode mit einer maximalen Abweichung von 7% bestätigt werden. Als zweites Beispiel wurde eine gedruckte Polyelektrolytmultischicht aus PAH/PSS untersucht. Die Herstellungsprozedur wurde so modifiziert, dass Goldnanopartikel in die Schichtstruktur eingebracht wurden. Durch Auswertung eines µ-GISAXS Experiments konnte der Einbau der Partikel identifiziert werden. Durch eine Anpassung mit einem Unified Fit Modell wurde herausgefunden, dass die Partikel nicht agglomeriert sind und von einer Polymermatrix umgeben sind.

"Offshore tower or platform foundations: numerical analysis of a laterally loaded single pile or pile group in soft clay and analysis of actions on a jacket structure"

Laterally loaded piles are a typical situation for a large number of cases in which deep foundations are used. Dissertation herein reported, is a focus upon the numerical simulation of laterally loaded piles. In the first chapter the best model settings are largely discussed, so a clear idea about the effects of interface adoption, model dimension, refinement cluster and mesh coarseness is reached. At a second stage, there are three distinct parametric analyses, in which the model response sensibility is studied for variation of interface reduction factor, Eps50 and tensile cut-off. In addition, the adoption of an advanced soil model is analysed (NGI-ADP). This was done in order to use the complex behaviour (different undrained shear strengths are involved) that governs the resisting process of clay under short time static loads. Once set a definitive model, a series of analyses has been carried out with the objective of defining the resistance-deflection (P-y) curves for Plaxis3D (2013) data. Major results of a large number of comparisons made with curves from API (America Petroleum Institute) recommendation are that the empirical curves have almost the same ultimate resistance but a bigger initial stiffness. In the second part of the thesis a simplified structural preliminary design of a jacket structure has been carried out to evaluate the environmental forces that act on it and on its piles foundation. Finally, pile lateral response is studied using the empirical curves.

Patch selection by wintering white-tailed deer : consequences for eastern hemlock regeneration at local and landscape scales

Tsuga canadensis (eastern hemlock) is a highly shade-tolerant, late-successional, and long-lived conifer species found throughout eastern North America. It is most often found in pure or nearly pure stands, because highly acidic and nutrient poor forest floor conditions are thought to favor T. canadensis regeneration while simultaneously limiting the establishment of some hardwood species with greater nutrient requirements. Once a common species, T. canadensis is currently experiencing widescale declines across its range. The hemlock woolly adelgid (Adelges tsugae) is decimating the population across its eastern distribution. Across the Upper Great Lakes region, where the adelgid is currently being held at bay by cold winter temperatures, T. canadensis has been experiencing failures in regeneration attributed, in part, to herbivory by white-tailed deer (Odocoileus virginianus). Deer utilize T. canadensis stands as winter habitat in areas of high snow depth. Tsuga canadensis, once a major component of these forests, currently exists at just a fraction of its pre-settlement abundance due to historic logging and contemporary forest management practices, and what remains is found in small remnant patches surrounded by second- and third-growth deciduous forests. The deer population across the region, however, is likely double that of pre-European settlement times. In this dissertation I explore the relationship between white-tailed deer use of T. canadensis as winter habitat and the effect this use is having on regeneration and forest succession. For this research I quantified stand composition and structure and abiotic variables of elevation and snow depth in 39 randomly selected T. canadensis stands from across the western Upper Peninsula of Michigan. I also quantified composition and the configuration of the landscapes surrounding these stands. I measured relative deer use of T. canadensis stands as pellet group piles deposited in each stand during each of three consecutive winters, 2005-06, 2006-07, and 2007-08. The results of this research suggest that deer use of T. canadensis stands as winter habitat is influenced primarily by snow depth, elevation, and the composition and configuration of the greater landscapes surrounding these stands. Specifically, stands with more heterogeneous landscapes surrounding them (i.e., a patchy mosaic of conifer, deciduous, and open cover) had higher relative deer use than stands surrounded by homogenous deciduous forest cover. Additionally, the intensity of use and the number of stands used was greater in years with higher average snow depth. Tsuga canadensis regeneration in these stands was negatively associated with deer use and Acer saccharum (sugar maple) basal area. Of the 39 stands, 17 and 22 stands had no T. canadensis regeneration in small and large sapling categories, respectively. Acer saccharum was the most common understory tree species, and the importance of A. saccharum in the understory (stems < 10 cm dbh) of the stands was positively associated with overstory A. saccharum dominance. Tsuga canadensis establishment was associated with high-decay coarse woody debris and moss, and deciduous leaf litter inputs in these stands may be limiting access to these important microsites. Furthermore, A. saccharum is more tolerant to the effects of deer herbivory than T. canadensis, giving A. saccharum a competitive advantage in stands being utilized as winter habitat by deer. My research suggests that limited microsite availability, in conjunction with deer herbivory, may be leading to an erosion in T. canadensis patch stability and an altered successional trajectory toward one of A. saccharum dominance, an alternately stable climax species.

Structural capacity of steel tubular cast-in-place piling

Steel tubular cast-in-place pilings are used throughout the country for many different project types. These piles are a closed-end pipe with varying wall thicknesses and outer diameters, that are driven to depth and then the core is filled with concrete. These piles are typically used for smaller bridges, or secondary structures. Mostly the piling is designed based on a resistance based method which is a function of the soil properties of which the pile is driven through, however there is a structural capacity of these members that is considered to be the upper bound on the loading of the member. This structural capacity is given by the AASHTO LRFD (2010), with two methods. These two methods are based on a composite or non-composite section. Many state agencies and corporations use the non-composite equation because it is requires much less computation and is known to be conservative. However with the trends of the time, more and more structural elements are being investigated to determine ways to better understand the mechanics of the members, which could lead to more efficient and safer designs. In this project, a set of these piling are investigated. The way the cross section reacts to several different loading conditions, along with a more detailed observation of the material properties is considered as part of this research. The evaluation consisted of testing stub sections of pile with varying sizes (10-¾”, 12-¾”), wall thicknesses (0.375”, 0.5”), and testing methods (whole compression, composite compression, push through, core sampling). These stub sections were chosen as they would represent a similar bracing length to many different soils. In addition, a finite element model was developed using ANSYS to predict the strains from the testing of the pile cross sections. This model was able to simulate the strains from most of the loading conditions and sizes that were tested. The bond between the steel shell and the concrete core, along with the concrete strength through the depth of the cross section were some of the material properties of these sections that were investigated.

Comparison of three methods for driven pile capacity

A significant cost for foundations is the design and installation of piles when they are required due to poor ground conditions. Not only is it important that piles be designed properly, but also that the installation equipment and total cost be evaluated. To assist in the evaluation of piles a number of methods have been developed. In this research three of these methods were investigated, which were developed by the Federal Highway Administration, the US Corps of Engineers and the American Petroleum Institute (API). The results from these methods were entered into the program GRLWEAPTM to assess the pile drivability and to provide a standard base for comparing the three methods. An additional element of this research was to develop EXCEL spreadsheets to implement these three methods. Currently the Army Corps and API methods do not have publicly available software and must be performed manually, which requires that data is taken off of figures and tables, which can introduce error in the prediction of pile capacities. Following development of the EXCEL spreadsheet, they were validated with both manual calculations and existing data sets to ensure that the data output is correct. To evaluate the three pile capacity methods data was utilized from four project sites from North America. The data included site geotechnical data along with field determined pile capacities. In order to achieve a standard comparison of the data, the pile capacities and geotechnical data from the three methods were entered into GRLWEAPTM. The sites consisted of both cohesive and cohesionless soils; where one site was primarily cohesive, one was primarily cohesionless, and the other two consisted of inter-bedded cohesive and cohesionless soils. Based on this limited set of data the results indicated that the US Corps of Engineers method more closely compared with the field test data, followed by the API method to a lesser degree. The DRIVEN program compared favorably in cohesive soils, but over predicted in cohesionless material.

Venedig oder Rom – Disegno e Colore. Ein Topos der Kunstkritik und seine Folgen

Partendo dal concetto di 'regionalismo' oppure d' identità regionale nell'interpretazione che ne ha dato Fernand Braudel ci rendiamo conto che il modo di guardare Venezia e l'arte veneziana con una certa ottica si forma a partire del romanticismo. Sono autori quali John Ruskin e Hippolyte Taine che sulla base della teoria del 'milieu' hanno dato inizio a un metodo della storia dell'arte ottocentesca che identifica il carattere del luogo e della sua gente con l'arte che vi viene prodotta. Il concetto teorico che sta alla base di questo modo di interpretare la pittura, deriva però dal Vasari e si riferiva all'opposizione artistica tra Venezia e Firenze, e al loro antagonismo che secondo Vasari vedeva vincitore il disegno. Dopo Vasari questo concetto viene ripreso da altri teorici italiani, ma all'inizio del Settecento il dibattito si sposta in Francia dove de Piles sulla scia del 'debat des anciens et modernes' dando la palma a Rubens invece di Poussin, prende la parte del colore. Grazie alla diffusione del nuovo gusto per il colore che si diffonde dalla Francia per tutta l'Europa, l'arte veneziana acquista una grandissima riputazione dalla quale approfittano soprattutto i pittori moderni veneziani attivi all'estero, durante il Settecento. Davanti questo sfondo viene sottolineata l'importanza di Venezia per il giovane Mengs che deve il suo primo successo al 'ritratto a pastelli', seguendo il gusto del sovrano sassone Augusto III. A causa dell'incarico per il quadro della chiesa cattolica di Dresda il pittore si porta a Venezia dove studia l'Assunta di Tiziano che si rispecchia nel quadro per Dresda. Dall'incontro con l'arte di Tiziano nasce un intenso dialogo teorico con la sua pittura di modo che Tiziano viene incluso da Mengs nella 'trias' dei tre primi pittori della storia della pittura per la perfezione del suo colore. Tale rivalutazione di Tiziano, pubblicata nei suoi scritti, porta alla revisione generale dei pregiudizi accademici verso la scuola veneziana sul livello teorico e pratico. A Venezia è Andrea Memmo, basandosi sui scritti di Mengs, a dare con la sua 'Orazione' davanti l'Accademia nel 1787 una nuova visione quando abbandona la tradizionale gerarchia 'disegno, colore e chiaroscuro' e con essa anche la tradizionale classifica delle scuole. Angelika Kauffmann che ritrae Memmo durante il suo soggiorno veneziano rappresenta forse il tipo di pittura che Memmo intese come ideale ed è una pittura che riunisce le qualità dei grandi maestri del passato facendolo confluire in un gusto universale. Spetterà poi al Lanzi di introdurre l'idea di una nuova pittura di carattere nazionale che si verifica durante l'Ottocento con i 'Macchiaioli' che danno la prevalenza al colore e non al disegno.

Walter Friedländer (1891-1984) – Between Social Democracy and Social Darwinism

If the profession of social work is to have a future we must know where it came from, and the series of portraits of our pioneers is one of the paths into the origins of that profession. I feel grateful to the publishers for this online-journal and also honoured to be asked to continue the series on pioneers in social work. I gladly comply because, in connection with my research on Alice Salomon and other social workers who were expelled from Germany and other Nazi-occupied territories (Wieler1989 and 1995) I had the pleasure and privilege of meeting and interviewing Walter Friedländer shortly before he passed away. It is years ago that I visited him in his home among stacks of books and piles of papers. My memories are vivid. I still see his sparkling eyes and hear his soft voice with a very heavy German accent. I was most impressed by his memory of historical events and people which, it seemed, only a large hard-drive could retain these days. Now, I wish I had asked more questions but instead, we will have to rely largely on primary and secondary literature and box upon box of archival materials. I draw heavily on the comprehensive German and Jewish Intellectual Emigré Collection (http://library.albany.edu/speccoll/findaids/ger003.htm) which consists of nearly 50 cubic feet and another collection of the German Central Institute („Deutsches Zentralinstitut für Soziale Fragen-DZI“) in Berlin (www.dzi.de). Some of the more current archival materials were lost in a flood, and much of Friedländer’s early memorabilia up to 1933 was lost in Germany. There are also internet resources with widely differing information. I hope that I will not have overlooked too much in order to do justice to this remarkable pioneer and colleague. In order to appreciate and pay tribute to Walter Friedländer and his contributions we will have to reconsider the historical and international context of more than the 93 years of his life span: the German Monarchy, the Weimar Republic, Nazi-Fascism, Swiss, French and American exile and numerous visits to other countries.

Schmiede ─ Heiligtum ─ Wassermühle. Cham-Hagendorn (Kanton Zug) in römischer Zeit. Ausgrabungen 1944/45 und 2003/04

1944/1945 wurde in Cham-Hagendorn eine Wassermühle ausgegraben, die dank ihrer aussergewöhnlich guten Holzerhaltung seit langem einen prominenten Platz in der Forschung einnimmt. 2003 und 2004 konnte die Kantonsarchäologie Zug den Platz erneut archäologisch untersuchen. Dabei wurden nicht nur weitere Reste der Wassermühle, sondern auch Spuren älterer und jüngerer Anlagen geborgen: eine ältere und eine jüngere Schmiedewerkstatt (Horizont 1a/Horizont 3) sowie ein zweiphasiges Heiligtum (Horizonte 1a/1b). All diese Anlagen lassen sich nun in das in den neuen Grabungen erkannte stratigraphische Gerüst einhängen (s. Beil. 2). Dank der Holzerhaltung können die meisten Phasen dendrochronologisch datiert werden (s. Abb. 4.1/1a): Horizont 1a mit Schlagdaten zwischen 162(?)/173 und 200 n. Chr., Horizont 1b um 215/218 n. Chr. und Horizont 2 um 231 n. Chr. Ferner konnten in den neuen Grabungen Proben für mikromorphologische und archäobotanische Untersuchungen entnommen werden (Kap. 2.2; 3.11). In der vorliegenden Publikation werden der Befund und die Baustrukturen vorgelegt, (Kap. 2), desgleichen sämtliche stratifizierten Funde und eine umfassende Auswahl der 1944/1945 geborgenen Funde (Kap. 3). Dank anpassender Fragmente, sog. Passscherben, lassen sich diese zum Teil nachträglich in die Schichtenabfolge einbinden. Die mikromorphologischen und die archäobotanischen Untersuchungen (Kap. 2.2; 3.11) zeigen, dass der Fundplatz in römischer Zeit inmitten einer stark vom Wald und dem Fluss Lorze geprägten Landschaft lag. In unmittelbarer Nähe können weder eine Siedlung noch einzelne Wohnbauten gelegen haben. Die demnach nur gewerblich und sakral genutzten Anlagen standen an einem Bach, der vermutlich mit jenem Bach identisch ist, der noch heute das Groppenmoos entwässert und bei Cham-Hagendorn in die Lorze mündet (s. Abb. 2.4/1). Der antike Bach führte wiederholt Hochwasser ─ insgesamt sind fünf grössere Überschwemmungsphasen auszumachen (Kap. 2.2; 2.4). Wohl anlässlich eines Seehochstandes durch ein Überschwappen der Lorze in den Bach ausgelöst, müssen diese Überschwemmungen eine enorme Gewalt entwickelt haben, der die einzelnen Anlagen zum Opfer fielen. Wie die Untersuchung der Siedlungslandschaft römischer Zeit rund um den Zugersee wahrscheinlich macht (Kap. 6 mit Abb. 6.2/2), dürften die Anlagen von Cham-Hagendorn zu einer in Cham-Heiligkreuz vermuteten Villa gehören, einem von fünf grösseren Landgütern in diesem Gebiet. Hinweise auf Vorgängeranlagen fehlen, mit denen die vereinzelten Funde des 1. Jh. n. Chr. (Kap. 4.5) in Verbindung gebracht werden könnten. Diese dürften eher von einer der Überschwemmungen bachaufwärts weggerissen und nach Cham-Hagendorn eingeschwemmt worden sein. Die Nutzung des Fundplatzes (Horizont 1a; s. Beil. 6) setzte um 170 n. Chr. mit einer Schmiedewerkstatt ein (Kap. 2.5.1). Der Fundanfall, insbesondere die Schmiedeschlacken (Kap. 3.9) belegen, dass hier nur hin und wieder Geräte hergestellt und repariert wurden (Kap. 5.2). Diese Werkstatt war vermutlich schon aufgelassen und dem Verfall preisgegeben, als man 200 n. Chr. (Kap. 4.2.4) auf einer Insel zwischen dem Bach und einem Lorzearm ein Heiligtum errichtete (Kap. 5.3). Beleg für den sakralen Status dieser Insel ist in erster Linie mindestens ein eigens gepflanzter Pfirsichbaum, nachgewiesen mit Pollen, einem Holz und über 400 Pfirsichsteinen (Kap. 3.11). Die im Bach verlaufende Grenze zwischen dem sakralen Platz und der profanen Umgebung markierte man zusätzlich mit einer Pfahlreihe (Kap. 2.5.3). In diese war ein schmaler Langbau integriert (Kap. 2.5.2), der an die oft an Temenosmauern antiker Heiligtümer angebauten Portiken erinnert und wohl auch die gleiche Funktion wie diese gehabt hatte, nämlich das Aufbewahren von Weihegaben und Kultgerät (Kap. 5.3). Das reiche Fundmaterial, das sich in den Schichten der ersten Überschwemmung fand (s. Abb. 5./5), die um 205/210 n. Chr. dieses Heiligtum zerstört hatte, insbesondere die zahlreiche Keramik (Kap. 3.2.4), und die zum Teil auffallend wertvollen Kleinfunde (Kap. 3.3.3), dürften zum grössten Teil einst in diesem Langbau untergebracht gewesen sein. Ein als Glockenklöppel interpretiertes, stratifiziertes Objekt spricht dafür, dass die fünf grossen, 1944/1945 als Stapel aufgefundenen Eisenglocken vielleicht auch dem Heiligtum zuzuweisen sind (Kap. 3.4). In diesen Kontext passen zudem die überdurchschnittlich häufig kalzinierten Tierknochen (Kap. 3.10). Nach der Überschwemmung befestigte man für 215 n. Chr. (Kap. 4.2.4) das unterspülte Bachufer mit einer Uferverbauung (Kap. 2.6.1). Mit dem Bau eines weiteren, im Bach stehenden Langbaus (Kap. 2.6.2) stellte man 218 n. Chr. das Heiligtum auf der Insel in ähnlicher Form wieder her (Horizont 1b; s. Beil. 7). Von der Pfahlreihe, die wiederum die sakrale Insel von der profanen Umgebung abgrenzte, blieben indes nur wenige Pfähle erhalten. Dennoch ist der sakrale Charakter der Anlage gesichert. Ausser dem immer noch blühenden Pfirsichbaum ist es ein vor dem Langbau aufgestelltes Ensemble von mindestens 23 Terrakottafigurinen (s. Abb. 3.6/1), elf Veneres, zehn Matres, einem Jugendlichen in Kapuzenmantel und einem kindlichen Risus (Kap. 3.6; s. auch Kap. 2.6.3). In den Sedimenten der zweiten Überschwemmung, der diese Anlage um 225/230 n. Chr. zum Opfer gefallen war, fanden sich wiederum zahlreiche Keramikgefässe (Kap. 3.2.4) und zum Teil wertvolle Kleinfunde wie eine Glasperle mit Goldfolie (Kap. 3.8.2) und eine Fibel aus Silber (Kap. 3.3.3), die wohl ursprünglich im Langbau untergebracht waren (Kap. 5.3.2 mit Abb. 5/7). Weitere Funde mit sicherem oder möglichem sakralem Charakter finden sich unter den 1944/1945 geborgenen Funden (s. Abb. 5/8), etwa ein silberner Fingerring mit Merkurinschrift, ein silberner Lunula-Anhänger, eine silberne Kasserolle (Kap. 3.3.3), eine Glasflasche mit Schlangenfadenauflage (Kap. 3.8.2) und einige Bergkristalle (Kap. 3.8.4). Im Bereich der Terrakotten kamen ferner mehrere Münzen (Kap. 3.7) zum Vorschein, die vielleicht dort niedergelegt worden waren. Nach der zweiten Überschwemmung errichtete man um 231 n. Chr. am Bach eine Wassermühle (Horizont 2; Kap. 2.7; Beil. 8; Abb. 2.7/49). Ob das Heiligtum auf der Insel wieder aufgebaut oder aufgelassen wurde, muss mangels Hinweisen offen bleiben. Für den abgehobenen Zuflusskanal der Wassermühle verwendete man mehrere stehen gebliebene Pfähle der vorangegangenen Anlagen der Horizonte 1a und 1b. Obwohl die Wassermühle den 28 jährlichen Überschwemmungshorizonten (Kap. 2.2) und den Funden (Kap. 4.3.2; 4.4.4; 45) zufolge nur bis um 260 n. Chr., während gut einer Generation, bestand, musste sie mindestens zweimal erneuert werden – nachgewiesen sind drei Wasserräder, drei Mühlsteinpaare und vermutlich drei Podeste, auf denen jeweils das Mahlwerk ruhte. Grund für diese Umbauten war wohl der weiche, instabile Untergrund, der zu Verschiebungen geführt hatte, so dass das Zusammenspiel von Wellbaum bzw. Sternnabe und Übersetzungsrad nicht mehr funktionierte und das ganze System zerbrach. Die Analyse von Pollen aus dem Gehhorizont hat als Mahlgut Getreide vom Weizentyp nachgewiesen (Kap. 3.11.4). Das Abzeichen eines Benefiziariers (Kap. 3.3.2 mit Abb. 3.3/23,B71) könnte dafür sprechen, dass das verarbeitete Getreide zumindest zum Teil für das römische Militär bestimmt war (s. auch Kap. 6.2.3). Ein im Horizont 2 gefundener Schreibgriffel und weitere stili sowie eine Waage für das Wägen bis zu 35-40 kg schweren Waren aus dem Fundbestand von 1944/1945 könnten davon zeugen, dass das Getreide zu wägen und zu registrieren war (Kap. 3.4.2). Kurz nach 260 n. Chr. fiel die Wassermühle einem weiteren Hochwasser zum Opfer. Für den folgenden Horizont 3 (Beil. 9) brachte man einen Kiesboden ein und errichtete ein kleines Gebäude (Kap. 2.8). Hier war wohl wiederum eine Schmiede untergebracht, wie die zahlreichen Kalottenschlacken belegen (Kap. 3.9), die im Umfeld der kleinen Baus zum Vorschein kamen. Aufgrund der Funde (Kap. 4.4.4; 4.5) kann diese Werkstatt nur kurze Zeit bestanden haben, höchstens bis um 270 n. Chr., bevor sie einem weiteren Hochwasser zum Opfer fiel. Von der jüngsten Anlage, die wohl noch in römische Zeit datiert (Horizont 4; Beil. 10), war lediglich eine Konstruktion aus grossen Steinplatten zu fassen (Kap. 2.9.1). Wozu sie diente, muss offen bleiben. Auch der geringe Fundanfall spricht dafür, dass die Nutzung des Platzes, zumindest für die römische Zeit, allmählich ein Ende fand (Kap. 4.5). Zu den jüngsten Strukturen gehören mehrere Gruben (Kap. 2.9.2), die vielleicht der Lehmentnahme dienten. Mangels Funden bleibt ihre Datierung indes ungewiss. Insbesondere wissen wir nicht, ob sie noch in römische Zeit datieren oder jünger sind. Spätestens mit der fünften Überschwemmung, die zur endgültigen Verlandung führte und wohl schon in die frühe Neuzeit zu setzen ist, wurde der Platz aufgelassen und erst mit dem Bau der bestehenden Fensterfabrik Baumgartner wieder besetzt.

Assessing fun in serious games: Formative evaluation of games from two diabetes prevention interventions

Purpose. To determine the usability of two video games to prevent type 2 diabetes and obesity among youth through analysis of data collected during alpha-testing. ^ Subjects. Ten children aged 9 to 12 were selected for three 2-hour alpha testing sessions.^ Methods. "Escape from Diab" and "Nanoswarm" were designed to change dietary and physical inactivity behaviors, based on a theoretical framework of mediating variables obtained from social cognitive theory, self-determination theory, elaboration likelihood model, and behavioral inoculation theory. Thirteen mini-games developed by the software company were divided into 3 groups based on completion date. Children tested 4-5 mini-games in each of three sessions. Observed game play was followed by a scripted interview. Results from observation forms and interview transcripts were tabulated and coded to determine usability. Suggestions for game modifications were delivered to the software design firm, and a follow-up table reports rationale for inclusion or exclusion of such modifications.^ Results. Participants were 50% frequent video game players and 20% non game-players. Most (60%) were female. The mean grade (indicating likeability as a subset of usability) across all games given by children was significantly greater than a neutral grade of 80% (89%, p < 0.01), indicating a positive likeability score. The games on average also received positive ratings for fun, helpfulness of instructions and length compared to neutral values (midpoint on likert scales) (all p < 0.01). Observation notes indicated that participants paid attention to the instructions, did not appear to have much difficulty with the games, and were "not frustrated", "not bored", "very engaged", "not fidgety" and "very calm" (all p < 0.01). The primary issues noted in observations and interviews were unclear instructions and unclear purpose of some games. Player suggestions primarily involved ways to make on screen cues more visible or noticeable, instructions more clear, and games more elaborate or difficult.^ Conclusions. The present study highlights the importance of alpha testing video game components for usability prior to completion to enhance usability and likeability. Results indicate that creating clear instructions, making peripheral screen cues more eye-catching or noticeable, and vigorously stating the purpose of the game to improve understandability are important elements. However, future interventions will each present unique materials and user-interfaces and should therefore also be thoroughly alpha-tested. ^

Benthic fauna at station FINO 1, 2005-2007

In der Nordsee wurden auf der Forschungsplattform FINO 1 Felduntersuchungen durchgeführt, um spezielle Fragen zu möglichen Auswirkungen von Offshore-Windenergieparks auf die marine Umwelt zu beantworten. Der Fokus war dabei auf die Konsequenzen für die Lebensgemeinschaft am Meeresboden gerichtet. Es wurden die benthosökologischen Prozesse im Nahbereich der Piles sowie die mittelfristige Entwicklung der Aufwuchsfauna auf der künstlichen Unterwasserstruktur dokumentiert. Die Ansammlung pelagischer Fischen um die Plattform und der Export organischen Materials von der Plattform wurden quantifiziert. Die räumliche Ausdehnung und die Erheblichkeit von Auswirkungen auf die Lebensgemeinschaften des Meeresbodens wurden anhand mathematischer Modellierung abgeschätzt. Zusätzlich wurde die Anwendbarkeit der elektrochemischen Akretionstechnologie zur Schaffung naturnaher Kalksubstrate in der Nordsee getestet und geeignete Parameter für eine erfolgreiche Umsetzung unter Nordseebedingungen ermittelt. Die auch 4,5 Jahre nach Errichtung der Plattform noch ansteigende Artenzahl der Aufwuchsfauna lässt darauf schließen, dass der Sukzessionsprozess noch nicht abgeschlossen ist. Die stark vertikal zonierte Aufwuchsfauna auf der Unterwasserkonstruktion erreicht eine Masse von ca. 5 Tonnen mit ausgeprägten saisonalen Schwankungen. Anhand von echoakustischen Untersuchungen wurden saisonal auftretende Ansammlungen pelagischer Fische um die Plattform dokumentiert. Der Nahbereich der Plattform unterschied sich durch eine Schillauflage und eine räumlich und zeitlich sehr variable Sediment- und Bodenfaunazusammensetzung deutlich von einem Referenzgebiet in 200-400 m Abstand von der Plattform. Eine konzentrische Zonierung mit unterschiedlich stark ausgeprägten Veränderungen der Bodenfauna lässt auf komplexe Veränderung des gesamten lokalen Nahrungsgefüges im Nahbereich der Plattform schließen. Anhand einer Modellierung konnte der Materialexport in die umgebenden Weichbodenbereiche für einzelne Piles und einen hypothetischen Windpark abgeschätzt werden. Die lokale Ausbildung einer hohen Biomasse auf der Unterwasserkonstruktion von WEA sowie der Export mit anschließender Sedimentation lassen zumindest lokal einen erheblichen Einfluss auf Stoff- und Energieflüsse erwarten.