La experiencia como base en la metodología aplicada al desarrollo rural del País Vasco

[EUS] Experitentzia, Eukal Autonomi Erkideko nekazal zonaldeen garapeneko metodologiaren oinarria. Nekazal zonaldeen garapenerako legearen onarpenaren hamarkada baten ondoren, non administrazioaren artean eta Eskualde Planaren bitartez ekiteko eredua definitzen zen, programen gauzapenean hutsune haundiak antzematen dira. Planak berritzeko helburuarekin egindako akatzen inguruan gogoeta bat burutzen da eta metodologi proposamen ezberdinak planteatzen dira. Hauen artean aurreko planen zehaztapen eta konpromesuz kale egin zuten izaera partizipatibo eta irikiaren aurrean asmo induktiboak, erabilgarriak eta ejekutagarriak proposatzen dira orain.

Alau reservoir: a multi-dimensional resource base in Borno State

Aspects of the fishery resources of Alau Reservoir in Maiduguri are reported upon in this paper. It focuses attention on the fishery in terms of fish abundance and potential. It also discusses other resources associated with the fish production. Various other possible uses of the reservoir are discussed too. The reservoir is thus revealed to be a most useful and versatile one in terms of fishery resources and fund generation

Analysis and optimization of stress wave propagation in two-dimensional granular crystals with defects

Granular crystals are compact periodic assemblies of elastic particles in Hertzian contact whose dynamic response can be tuned from strongly nonlinear to linear by the addition of a static precompression force. This unique feature allows for a wide range of studies that include the investigation of new fundamental nonlinear phenomena in discrete systems such as solitary waves, shock waves, discrete breathers and other defect modes. In the absence of precompression, a particularly interesting property of these systems is their ability to support the formation and propagation of spatially localized soliton-like waves with highly tunable properties. The wealth of parameters one can modify (particle size, geometry and material properties, periodicity of the crystal, presence of a static force, type of excitation, etc.) makes them ideal candidates for the design of new materials for practical applications. This thesis describes several ways to optimally control and tailor the propagation of stress waves in granular crystals through the use of heterogeneities (interstitial defect particles and material heterogeneities) in otherwise perfectly ordered systems. We focus on uncompressed two-dimensional granular crystals with interstitial spherical intruders and composite hexagonal packings and study their dynamic response using a combination of experimental, numerical and analytical techniques. We first investigate the interaction of defect particles with a solitary wave and utilize this fundamental knowledge in the optimal design of novel composite wave guides, shock or vibration absorbers obtained using gradient-based optimization methods.

Protocolo de prevención de partidos de riesgo: una experiencia aplicada para la prevención de la violencia en el fútbol base

[EN] This study presents an applied experience which takes part of a program on prevention of the violence in soccer in school age. The aim was the acquisition of the commitment of the trainers involved in matches considered as non sportive, in the fulfillment of sportive behavior guidelines. To achieve this aim, a meeting was carried out by the trainers of the equipments that led violent incidents in the first round of the league, with the presidents of these equipments, with representatives of the local football Federation and with representatives of the Committee of referees. From this meeting it was intended: 1) to reduce the probability of aggressive and violent incidents; 2) to promote a relation of cooperation between the entities of the teams that led non sportive incidents, and the referee group; and 3) Make the sports context be a protector to prevent non sportive behaviors. The results of this study reflect that the participation had a positive effect in the improvement of the sportsmanship in the return football matches of the league.

Controlling wave propagation through nonlinear engineered granular systems

We study the fundamental dynamic behavior of a special class of ordered granular systems in order to design new, structured materials with unique physical properties. The dynamic properties of granular systems are dictated by the nonlinear, Hertzian, potential in compression and zero tensile strength resulting from the discrete material structure. Engineering the underlying particle arrangement of granular systems allows for unique dynamic properties, not observed in natural, disordered granular media. While extensive studies on 1D granular crystals have suggested their usefulness for a variety of engineering applications, considerably less attention has been given to higher-dimensional systems. The extension of these studies in higher dimensions could enable the discovery of richer physical phenomena not possible in 1D, such as spatial redirection and anisotropic energy trapping. We present experiments, numerical simulation (based on a discrete particle model), and in some cases theoretical predictions for several engineered granular systems, studying the effects of particle arrangement on the highly nonlinear transient wave propagation to develop means for controlling the wave propagation pathways. The first component of this thesis studies the stress wave propagation resulting from a localized impulsive loading for three different 2D particle lattice structures: square, centered square, and hexagonal granular crystals. By varying the lattice structure, we observe a wide range of properties for the propagating stress waves: quasi-1D solitary wave propagation, fully 2D wave propagation with tunable wave front shapes, and 2D pulsed wave propagation. Additionally the effects of weak disorder, inevitably present in real granular systems, are investigated. The second half of this thesis studies the solitary wave propagation through 2D and 3D ordered networks of granular chains, reducing the effective density compared to granular crystals by selectively placing wave guiding chains to control the acoustic wave transmission. The rapid wave front amplitude decay exhibited by these granular networks makes them highly attractive for impact mitigation applications. The agreement between experiments, numerical simulations, and applicable theoretical predictions validates the wave guiding capabilities of these engineered granular crystals and networks and opens a wide range of possibilities for the realization of increasingly complex granular material design.

Sequence specific complexation of b DNA at sites containing g,c base pairs

A series of eight related analogs of distamycin A has been synthesized. Footprinting and affinity cleaving reveal that only two of the analogs, pyridine-2- car box amide-netropsin (2-Py N) and 1-methylimidazole-2-carboxamide-netrops in (2-ImN), bind to DNA with a specificity different from that of the parent compound. A new class of sites, represented by a TGACT sequence, is a strong site for 2-PyN binding, and the major recognition site for 2-ImN on DNA. Both compounds recognize the G•C bp specifically, although A's and T's in the site may be interchanged without penalty. Additional A•T bp outside the binding site increase the binding affinity. The compounds bind in the minor groove of the DNA sequence, but protect both grooves from dimethylsulfate. The binding evidence suggests that 2-PyN or 2-ImN binding induces a DNA conformational change.

In order to understand this sequence specific complexation better, the Ackers quantitative footprinting method for measuring individual site affinity constants has been extended to small molecules. MPE•Fe(II) cleavage reactions over a 10^5 range of free ligand concentrations are analyzed by gel electrophoresis. The decrease in cleavage is calculated by densitometry of a gel autoradiogram. The apparent fraction of DNA bound is then calculated from the amount of cleavage protection. The data is fitted to a theoretical curve using non-linear least squares techniques. Affinity constants at four individual sites are determined simultaneously. The distamycin A analog binds solely at A•T rich sites. Affinities range from 10^(6)- 10^(7)M^(-1) The data for parent compound D fit closely to a monomeric binding curve. 2-PyN binds both A•T sites and the TGTCA site with an apparent affinity constant of 10^(5) M^(-1). 2-ImN binds A•T sites with affinities less than 5 x 10^(4) M^(-1). The affinity of 2-ImN for the TGTCA site does not change significantly from the 2-PyN value. At the TGTCA site, the experimental data fit a dimeric binding curve better than a monomeric curve. Both 2-PyN and 2-ImN have substantially lower DNA affinities than closely related compounds.

In order to probe the requirements of this new binding site, fourteen other derivatives have been synthesized and tested. All compounds that recognize the TGTCA site have a heterocyclic aromatic nitrogen ortho to the N or C-terminal amide of the netropsin subunit. Specificity is strongly affected by the overall length of the small molecule. Only compounds that consist of at least three aromatic rings linked by amides exhibit TGTCA site binding. Specificity is only weakly altered by substitution on the pyridine ring, which correlates best with steric factors. A model is proposed for TGTCA site binding that has as its key feature hydrogen bonding to both G's by the small molecule. The specificity is determined by the sequence dependence of the distance between G's.

One derivative of 2-PyN exhibits pH dependent sequence specificity. At low pH, 4-dimethylaminopyridine-2-carboxamide-netropsin binds tightly to A•T sites. At high pH, 4-Me_(2)NPyN binds most tightly to the TGTCA site. In aqueous solution, this compound protonates at the pyridine nitrogen at pH 6. Thus presence of the protonated form correlates with A•T specificity.

The binding site of a class of eukaryotic transcriptional activators typified by yeast protein GCN4 and the mammalian oncogene Jun contains a strong 2-ImN binding site. Specificity requirements for the protein and small molecule are similar. GCN4 and 2-lmN bind simultaneously to the same binding site. GCN4 alters the cleavage pattern of 2-ImN-EDTA derivative at only one of its binding sites. The details of the interaction suggest that GCN4 alters the conformation of an AAAAAAA sequence adjacent to its binding site. The presence of a yeast counterpart to Jun partially blocks 2-lmN binding. The differences do not appear to be caused by direct interactions between 2-lmN and the proteins, but by induced conformational changes in the DNA protein complex. It is likely that the observed differences in complexation are involved in the varying sequence specificity of these proteins.

Evolução geológica do Complexo Quirino, Terreno Paraíba do Sul, Setor Central da Faixa Ribeira, com base em dados isotópicos de Sm-Nd e Sr

A área estudada está inserida na Faixa Ribeira, Segmento Central da Província Mantiqueira (Almeida et al., 1973, 1977, 1981), que representa um cinturão de dobramentos e empurrões gerado no Neo-proterozóico/Cambriano, durante a Orogênese Brasiliana, na borda sul/sudeste do Cráton do São Francisco (Almeida, 1971, 1977; Cordani et al., 1967, 1973; Cordani & Brito Neves, 1982; Teixeira & Figueiredo, 1991). Neste contexto, o Complexo Quirino é o embasamento retrabalhado do Terreno Paraíba do Sul (Heilbron et al., 2004). O Complexo Quirino é formado por extensos corpos de ortognaisses foliados a homogêneos, leuco a mesocráticos, de granulometria média à grossa, composicionalmente variando entre granitóides tonalíticos/granodioríticos a graníticos, e apresentando enclaves de rochas ultramáficas, máficas e cálcio-silicáticas (ricas em tremolita). Os ortognaisses tonalíticos/granodioríticos apresentam porfiroblastos de plagioclásio e a hornblenda como máfico principal, contrastando com os de composição granítica que apresentam porfiroblastos de K-feldspato e biotita predominante. Como acessórios aparecem zircão, titanita, apatita e epidoto. Também estão associados a estes ortognaisses, granitóides neoproterozóicos que formam corpos individualizados ou lentes anatéticas no conjunto paleoproterozóico. Estes são compostos predominantemente por biotita gnaisse e hornblenda-biotita gnaisse. A análise litogeoquímicas dos ortognaisses do Complexo Quirino demonstrou a existência de duas séries magmáticas distintas. A primeira pertencente à série cálcio-alcalina de alto-K apresenta uma composição mais expandida granítica-adamelítica/granodioritica/tonalítica e é correlacionável aos bt-ortognaisses e alguns hb-bt-ortognaisses. Os ortognaisses da série médio-K apresentam composição predominantemente tonalítica, sendo correlacionáveis à maioria dos hornblenda-biotita gnaisses. Enclaves lenticulares de metapiroxeníticos e anfibolíticos ocorrem em muitos afloramentos. Também ocorrem granitóides neoproterozóicos de composição graníticas a quartzo-monzoníticas O estudo isotópico de Sm-Nd e Sr demonstrou que os ortognaisses da série cálcio-alcalina de alto-K e aqueles da série cálcio-alcalina de médio-K possuem idades modelo TDM variando entre paleoproterozóicas a arqueanas, consistentes com dados U-Pb em zircão publicados na literatura. A série cálcio-alcalina de alto-K é mais antiga (2308 9,2 Ma a 2185 8 Ma) do que a série calcio-alcalina de médio-K (2169 3 a 2136 14 Ma) e a existência de zircões herdados com idades mínimas de 2846 Ma e 2981 Ma para série de médio-K e 3388 16 para série de alto-K. Os granitóides brasilianos possuem idades de cristalização neoproterozóica correlacionada a Orogênese Brasiliana (602 a 627 Ma) (Viana, 2008; Valladares et al., 2002)./Com base nos dados de Sr e Sm-Nd foi possível caracterizar 4 grupos distintos. Os grupos 1 e 2 são formados por rochas de idade paleoproterozóica (2,1 a 2,3 Ga) com idades modelo TDM variando de 2,9 e 3,4 Ga, εNd entre -8,1 e -5,8 e 87Sr/86Sr(t) = 0,694707 (Grupo 1) e TDM variando de 2,5 a 2,7 Ga, εNd entre -5,8 e -3,1 e 87Sr/86Sr(t) = 0,680824 (Grupo 2), formados no paleoproterozóico com contribuição de uma crosta arqueana. O grupo 3 é formado por rochas juvenis de idade paleoproterozóica, com idades de cristalização variando entre 2,0 e 2,2 Ga e com idades modelo TDM variando de 2,1 a 2,2 Ga e εNd entre + 1,5 e + 1,2. O grupo 4 é formado durante o neoproterozóico (645 Ma) por rochas possivelmente de idade paleoproterozóico com idades modelo TDM igual a 1,7 Ga e εNd igual a -8,3.

Síntese, caracterização e avaliação da capacidade bactericida de copolímeros à base de 2-vinilpiridina funcionalizados

Neste trabalho, dois copolímeros à base de 2-vinilpiridina (2Vpy), estireno (Sty) e divinilbenzeno (DVB) foram sintetizados empregando a técnica de polimerização em suspensão aquosa via radical livre. Os copolímeros com diferentes características morfológicas foram preparados variando a composição da mistura diluente, constituída por tolueno e n-heptano, solventes solvatantes e não solvatantes para as cadeias poliméricas. A caracterização estrutural desses materiais foi feita através de medidas de área específica, volume de poros, diâmetro médio de poros e densidade aparente. Além disso, esses materiais foram avaliados por microscopia ótica e eletrônica de varredura, por espectroscopia na região do infravermelho (FTIR), análise termogravimétrica (TGA) e análise elementar. Os copolímeros Sty-DVB-2Vpy foram modificados quimicamente através de reação de quaternização das unidades de 2Vpy usando dois reagentes: iodeto de metila e acrilonitrila. A quaternização dos copolímeros Sty-DVB-2Vpy foi confirmada através de espectroscopia de infravermelho, pelo aparecimento das bandas de absorção características do íon peridíneo e do grupo nitrila e também pela análise do comportamento térmico. Os produtos dessas reações foram submetidos à avaliação da capacidade bactericida através do método de contagem em placas contra suspensão de Escherichia coli. O copolímero do tipo gel quaternizado com iodeto de metila apresentou a maior ação bactericida registrada, com eficiência até a concentração de 104 células/mL. Contudo, a maioria dos materiais quaternizados não apresentou ação biocida significativa. Com o objetivo de maximizar a atividade bactericida dos materiais preparados, os copolímeros quaternizados e não quaternizados foram impregnados com iodo por meio de duas metodologias: em solução e em fase vapor. O teor de iodo incorporado foi quantificado por análise gravimétrica. Foi possível observar que os copolímeros quaternizados e impregnados com iodo se mostraram mais eficientes como agentes bactericidas que os copolímeros não funcionalizados impregnados com iodo. De uma forma geral, foi possível perceber que a ação bactericida dos polímeros é fruto da associação entre as suas características de porosidade, o grau de quaternização alcançado e o teor de iodo incorporado. Para efeito de comparação foram feitos também ensaios bactericidas com uma resina comercial à base de Sty-DVB com grupo amônio quaternário, VP OC 1950. Os testes mostraram que a resina comercial não possui atividade bactericida. A impregnação de iodo a essa resina comercial forneceu um material com ação biocida semelhante à do copolímero do tipo gel, quaternizado com iodeto de metila e impregnado com iodo

Conduction-electron localized-moment interaction in palladium-silicon base amorphous alloys containing transition metals

The electrical and magnetic properties of amorphous alloys obtained by rapid quenching from the liquid state have been studied. The composition of these alloys corresponds to the general formula M_xPd_80-xSi₂₀, in which M stands for a metal of the first transition series between chromium and nickel and x is its atomic concentration. The concentration ranges within which an amorphous structure could be obtained were: from 0 to 7 for Cr, Mn and Fe, from 0 to 11 for Co and from 0 to 15 for Ni. A well-defined minimum in the resistivity vs temperature curve was observed for all alloys except those containing nickel. The alloys for which a resistivity minimum was observed had a negative magnetoresistivity approximately proportional to the square of the magnetization and their susceptibility obeyed the Curie-Weiss law in a wide temperature range. For concentrated Fe and Co alloys the resistivity minimum was found to coexist with ferromagnetism. These observations lead to the conclusion that the present results are due to a s-d exchange interaction. The unusually high resistivity minimum temperature observed in the Cr alloys is interpreted as a result of a high Kondo temperature and a large s-d exchange integral. A low Fermi energy of the amorphous alloys (3.5 eV) is also responsible for the anomalies due to the s-d exchange interaction.

Band structure and transport properties of simple cubic tellurium-base alloys

The electrical transport properties and lattice spacings of simple cubic Te-Au, Te-Au-Fe, and Te-Au-Mn alloys, prepared by rapid quenching from the liquid state, hove been measured and correlated with a proposed bond structure. The variations of superconducting transition temperature, absolute thermoelectric power, and lattice spacing with Te concentration all showed related anomalies in the binary Te-Au alloys. The unusual behavior of these properties has been interpreted by using nearly free electron theory to predict the effect of the second Brillouin zone boundary on the area of the Fermi surface, and the electronic density of states. The behavior of the superconducting transition temperature and the lattice parameter as Fe and Mn ore added further supports the proposed interpretation as well as providing information on the existence of localized magnetic states in the ternary alloys. In addition, it was found that a very distinct bond structure effect on the transition temperatures of the Te-Au-Fe alloys could be identified.

Electrical resistance and thermoelectric power of the metastable phases in tellurium-base alloys

By using techniques of rapid quenching from the melt, metastable phases have been obtained in ternary alloys which contain tellurium as a major component and two of the three noble metals (Cu, Ag, Au) as minor components. The metastable phases found in this investigation are either simple cubic or amorphous. The formation of the simple cubic phase is discussed. The electrical resistance and the thermoelectric power of the simple cubic alloy (Au₃₀Te₇₀) have been measured and interpreted in terms of atomic bondings. The semiconducting properties of a metastable amorphous alloy (Au₅Cu₂₅Te₇₀) have been measured. The experimental results are discussed in connection with a theoretical consideration of the validity of band theory in an amorphous solid. The existence of extrinsic conduction in an amorphous semiconductor is suggested by the result of electrical resistance and thermoelectric power measurements.

Discrete Modeling of Granular Media: A NURBS-based Approach

This dissertation is concerned with the development of a new discrete element method (DEM) based on Non-Uniform Rational Basis Splines (NURBS). With NURBS, the new DEM is able to capture sphericity and angularity, the two particle morphological measures used in characterizing real grain geometries. By taking advantage of the parametric nature of NURBS, the Lipschitzian dividing rectangle (DIRECT) global optimization procedure is employed as a solution procedure to the closest-point projection problem, which enables the contact treatment of non-convex particles. A contact dynamics (CD) approach to the NURBS-based discrete method is also formulated. By combining particle shape flexibility, properties of implicit time-integration, and non-penetrating constraints, we target applications in which the classical DEM either performs poorly or simply fails, i.e., in granular systems composed of rigid or highly stiff angular particles and subjected to quasistatic or dynamic flow conditions. The CD implementation is made simple by adopting a variational framework, which enables the resulting discrete problem to be readily solved using off-the-shelf mathematical programming solvers. The capabilities of the NURBS-based DEM are demonstrated through 2D numerical examples that highlight the effects of particle morphology on the macroscopic response of granular assemblies under quasistatic and dynamic flow conditions, and a 3D characterization of material response in the shear band of a real triaxial specimen.

Avaliação das propriedades de barreira a gases de membranas obtidas a partir de dispersões aquosas à base de poliuretanos e argila

Materiais nanoestruturados têm recebido destaque na comunidade científica, destacando-se, dentre eles, os nanocompósitos à base de polímeros e argila. Quando esses materiais são obtidos no estado líquido, ressalta-se também o uso de água em substituição a solventes orgânicos, devido a questões ambientais. Neste trabalho foram sintetizadas dispersões aquosas à base de poliuretanos (WPUs) e argila hidrofílica do tipo montimorilonita (MMT) de natureza sódica, com o objetivo de avaliar as propriedades de barreira a gases conferidas pela presença de argila e pela variação nas proporções entre os segmentos flexíveis poli(glicol propilênico) (PPG) e o copolímero em bloco à base de poli(glicol etilênico) e poli(glicol propilênico) (EG-b-PG). Os monômeros empregados na síntese foram: poli(glicol propilênico) (PPG); copolímero em bloco à base de poli(glicol etilênico) e poli(glicol propilênico) (EG-b-PG), com teor de 7% de EG; ácido dimetilolpropiônico (DMPA), diisocianato de isoforona (IPDI) e etilenodiamina (EDA), como extensor de cadeia. Foram sintetizadas dispersões aquosas com e sem a presença de argila, fixando-se a razão entre o número de equivalentes-grama de grupos diisocianato e hidroxila (razão NCO/OH) em 1,5. Nas formulações foi variado também o teor de argila em relação à massa de prepolímero em 0,5% e 1%. Foi adicionada uma etapa de agitação adicional com dispersor Turrax em algumas formulações. A argila foi previamente deslaminada em água deionizada e incorporada à formulação na etapa da dispersão do prepolímero. As dispersões foram avaliadas, quanto ao teor de sólidos totais, tamanho médio de partícula e viscosidade aparente. Os filmes vazados a partir das dispersões foram caracterizados por espectrometria na região do infravermelho (FTIR) e permeabilidade ao CO2. A resistência térmica dos filmes foi determinada por termogravimetria (TG). Foram observadas modificações nas propriedades dos filmes obtidos com a inserção da argila e com a variação no teor de segmentos à base de poli(glicol etilênico). A inserção da argila promoveu uma melhoria na resistência térmica das membranas bem como uma redução na permeabilidade das mesmas. Foi observado um aumento na permeabilidade das membranas obtidas a partir das formulações com maior percentual de copolímero (EG-b-PG), com e sem argila.

Nonlinear Effects in Granular Crystals with Broken Periodicity

When studying physical systems, it is common to make approximations: the contact interaction is linear, the crystal is periodic, the variations occurs slowly, the mass of a particle is constant with velocity, or the position of a particle is exactly known are just a few examples. These approximations help us simplify complex systems to make them more comprehensible while still demonstrating interesting physics. But what happens when these assumptions break down? This question becomes particularly interesting in the materials science community in designing new materials structures with exotic properties In this thesis, we study the mechanical response and dynamics in granular crystals, in which the approximation of linearity and infinite size break down. The system is inherently finite, and contact interaction can be tuned to access different nonlinear regimes. When the assumptions of linearity and perfect periodicity are no longer valid, a host of interesting physical phenomena presents itself. The advantage of using a granular crystal is in its experimental feasibility and its similarity to many other materials systems. This allows us to both leverage past experience in the condensed matter physics and materials science communities while also presenting results with implications beyond the narrower granular physics community. In addition, we bring tools from the nonlinear systems community to study the dynamics in finite lattices, where there are inherently more degrees of freedom. This approach leads to the major contributions of this thesis in broken periodic systems. We demonstrate the first defect mode whose spatial profile can be tuned from highly localized to completely delocalized by simply tuning an external parameter. Using the sensitive dynamics near bifurcation points, we present a completely new approach to modifying the incremental stiffness of a lattice to arbitrary values. We show how using nonlinear defect modes, the incremental stiffness can be tuned to anywhere in the force-displacement relation. Other contributions include demonstrating nonlinear breakdown of mechanical filters as a result of finite size, and the presents of frequency attenuation bands in essentially nonlinear materials. We finish by presenting two new energy harvesting systems based on our experience with instabilities in weakly nonlinear systems.