Final report : enabling team collaboration with pervasive and mobile computing

This is the final report of research project 2002-057-C: Enabling Team Collaboration with Pervasive and Mobile Computing. The research project was carried out by the Australian Cooperative Research Centre for Construction Innovation and has two streams that consider the use of pervasive computing technologies in two different contexts. The first context was the on-site deployment of mobile computing devices, where as the second context was the use and development of intelligent rooms based on sensed environments and new human-computer interfaces (HCI) for collaboration in the design office. The two streams present a model of team collaboration that relies on continues communication to people and information to reduce information leakage. This report consists of five sections: (1) Introduction; (2) Research Project Background; (3) Project Implementation; (4) Case Studies and Outcomes; and (5) Conclusion and Recommendation. Introduction in Section 1 presents a brief description of the research project including general research objectives and structure. Section 2 introduces the background of the research and detailed information regarding project participants, objectives and significance, and also research methodology. Review of all research activities such as literature review and case studies are summarised in Project Implementation in Section 3. Following this, in Section 4 the report then focuses on analysing the case studies and presents their outcomes. Conclusion and recommendation of the research project are summarised in Section 5. Other information to support the content of the report such as research project schedule is provided in Appendices. The purpose of the final project report is to provide industry partners with detailed information on the project activities and methodology such as the implementation of pervasive computing technologies in the real contexts. The report summarises the outcomes of the case studies and provides necessary recommendation to industry partners of using new technologies to support better project collaboration.

Report : enabling team collaboration with pervasive and mobile computing : cost benefit analysis methodology

Construction is an information intensive industry in which the accuracy and timeliness of information is paramount. It observed that the main communication issue in construction is to provide a method to exchange data between the site operation, the site office and the head office. The information needs under consideration are time critical to assist in maintaining or improving the efficiency at the jobsite. Without appropriate computing support this may increase the difficulty of problem solving. Many researchers focus their research on the usage of mobile computing devices in the construction industry and they believe that mobile computers have the potential to solve some construction problems that leads to reduce overall productivity. However, to date very limited observation has been conducted in terms of the deployment of mobile computers for construction workers on-site. By providing field workers with accurate, reliable and timely information at the location where it is needed, it will support the effectiveness and efficiency at the job site. Bringing a new technology into construction industry is not only need a better understanding of the application, but also need a proper preparation of the allocation of the resources such as people, and investment. With this in mind, an accurate analysis is needed to provide clearly idea of the overall costs and benefits of the new technology. A cost benefit analysis is a method of evaluating the relative merits of a proposed investment project in order to achieve efficient allocation of resources. It is a way of identifying, portraying and assessing the factors which need to be considered in making rational economic choices. In principle, a cost benefit analysis is a rigorous, quantitative and data-intensive procedure, which requires identification all potential effects, categorisation of these effects as costs and benefits, quantitative estimation of the extent of each cost and benefit associated with an action, translation of these into a common metric such as dollars, discounting of future costs and benefits into the terms of a given year, and summary of all cost and benefit to see which is greater. Even though many cost benefit analysis methodologies are available for a general assessment, there is no specific methodology can be applied for analysing the cost and benefit of the application of mobile computing devices in the construction site. Hence, the proposed methodology in this document is predominantly adapted from Baker et al. (2000), Department of Finance (1995), and Office of Investment Management (2005). The methodology is divided into four main stages and then detailed into ten steps. The methodology is provided for the CRC CI 2002-057-C Project: Enabling Team Collaboration with Pervasive and Mobile Computing and can be seen in detail in Section 3.

Report : enabling team collaboration with pervasive and mobile computing : a review of existing mobile computing technologies

The application of Information and Communication Technology (ICT) in construction industry has been recognised widely by some practitioners and researchers for the last several years. During the 1990s the international construction industry started using with the increasing confidence information and communication technology. The use of e-mail became usual and web-sites were established for marketing purposes. Intranets and extranets were also established to facilitate communication within companies and throughout their branches. One of the important applications of the ICT in construction industry was the use of mobile computing devices to achieve better communication and data transmission between construction sites and offices.

Development of a biaxial compression device for biological samples : preliminary experimental results for a closed cell foam

Biological tissues are subjected to complex loading states in vivo and in order to define constitutive equations that effectively simulate their mechanical behaviour under these loads, it is necessary to obtain data on the tissue's response to multiaxial loading. Single axis and shear testing of biological tissues is often carried out, but biaxial testing is less common. We sought to design and commission a biaxial compression testing device, capable of obtaining repeatable data for biological samples. The apparatus comprised a sealed stainless steel pressure vessel specifically designed such that a state of hydrostatic compression could be created on the test specimen while simultaneously unloading the sample along one axis with an equilibrating tensile pressure. Thus a state of equibiaxial compression was created perpendicular to the long axis of a rectangular sample. For the purpose of calibration and commissioning of the vessel, rectangular samples of closed cell ethylene vinyl acetate (EVA) foam were tested. Each sample was subjected to repeated loading, and nine separate biaxial experiments were carried out to a maximum pressure of 204 kPa (30 psi), with a relaxation time of two hours between them. Calibration testing demonstrated the force applied to the samples had a maximum error of 0.026 N (0.423% of maximum applied force). Under repeated loading, the foam sample demonstrated lower stiffness during the first load cycle. Following this cycle, an increased stiffness, repeatable response was observed with successive loading. While the experimental protocol was developed for EVA foam, preliminary results on this material suggest that this device may be capable of providing test data for biological tissue samples. The load response of the foam was characteristic of closed cell foams, with consolidation during the early loading cycles, then a repeatable load-displacement response upon repeated loading. The repeatability of the test results demonstrated the ability of the test device to provide reproducible test data and the low experimental error in the force demonstrated the reliability of the test data.

The appeal of the International Baccalaureate in Australia’s educational market: A curriculum of choice for mobile futures

In Australia there is growing interest in a national curriculum to replace the variety of matriculation credentials managed by State Education departments, ostensibly to address increasing population mobility. Meanwhile, the International Baccalaureate (IB) is attracting increasing interest and enrolments in State and private schools in Australia, and has been considered as one possible model for a proposed Australian Certificate of Education. This paper will review the construction of this curriculum in Australian public discourse as an alternative frame for producing citizens, and ask why this design appeals now, to whom, and how the phenomenon of its growing appeal might inform national curricular debates. The IB’s emergence is understood with reference to the larger context of neo-liberal marketization policies, neo-conservative claims on the curriculum and middle class strategy. The paper draws on public domain documents from the IB Organisation and newspaper reportage to demonstrate how the IB is constructed for public consumption in Australia.

Planning mobile futures : the border artistry of International Baccalaureate Diploma choosers

This paper reports on a study of students choosing the International Baccalaureate Diploma (IBD) over state-based curricula in Australian schools. The IBD was initially designed as a matriculation certificate to facilitate international mobility. While first envisaged as a lifestyle agenda for cultural elites, such mobility is now widespread with more people living ‘beyond the nation’ through choice or circumstance. Beck (2007) and others highlight how the capacity to cross national borders offers a competitive edge with which to strategically pursue economic and cultural capital. Beck’s ‘border artistes’ are those who use national borders to their individual advantage through reflexive strategy. The study explored the rationales and strategy behind the choice of the IBD curriculum expressed by students in a focus group interview and an online survey. This paper reports on their imagined transnational routes and mobile orientations, and how a localised curriculum limits their imagined mobile futures.

Unleashing creative writers : situated engagement with mobile narratives

The emergence of sophisticated multimedia phones in combination with improvements to the mobile Internet provides the possibility to read texts and stories on mobile handsets. However, the question is, how to adapt stories in order to take advantage of the user’s mobility and create an engaging and appealing experience. To address these new conditions, a Mobile Narrative was created and access to individual chapters of the story was restricted. Authors can specify constraints, such as a location or time, which need to be met by the reader if they want to read the story. This concept allows creative writers of the story to exploit the fact that the reader’s context is known, by intensifying the user experience and integrating this knowledge into the writing process. Interviews with authors and creative writers and two user studies explored the effects of this way of writing on both parties. The paper presents our preliminary research findings discussing this new experience that was found to be exciting and interesting by both sides.

Biological performance of a polycaprolactone-based scaffold used as fusion cage device in a large animal model of spinal reconstructive surgery

A bioactive and bioresorbable scaffold fabricated from medical grade poly (epsilon-caprolactone) and incorporating 20% beta-tricalcium phosphate (mPCL–TCP) was recently developed for bone regeneration at load bearing sites. In the present study, we aimed to evaluate bone ingrowth into mPCL–TCP in a large animal model of lumbar interbody fusion. Six pigs underwent a 2-level (L3/4; L5/6) anterior lumbar interbody fusion (ALIF) implanted with mPCL–TCP þ 0.6 mg rhBMP-2 as treatment group while four other pigs implanted with autogenous bone graft served as control. Computed tomographic scanning and histology revealed complete defect bridging in all (100%) specimen from the treatment group as early as 3 months. Histological evidence of continuing bone remodeling and maturation was observed at 6 months. In the control group, only partial bridging was observed at 3 months and only 50% of segments in this group showed complete defect bridging at 6 months. Furthermore, 25% of segments in the control group showed evidence of graft fracture, resorption and pseudoarthrosis. In contrast, no evidence of graft fractures, pseudoarthrosis or foreign body reaction was observed in the treatment group. These results reveal that mPCL–TCP scaffolds could act as bone graft substitutes by providing a suitable environment for bone regeneration in a dynamic load bearing setting such as in a porcine model of interbody spine fusion.

Designing participation in agile ridesharing with mobile social software

Growing participation is a key challenge for the viability of sustainability initiatives, many of which require enactment at a local community level in order to be effective. This paper undertakes a review of technology assisted carpooling in order to understand the challenge of designing participation and consider how mobile social software and interface design can be brought to bear. It was found that while persuasive technology and social networking approaches have roles to play, critical factors in the design of carpooling are convenience, ease of use and fit with contingent circumstances, all of which require a use-centred approach to designing a technological system and building participation. Moreover, the reach of technology platform-based global approaches may be limited if they do not cater to local needs. An approach that focuses on iteratively designing technology to support and grow mobile social ridesharing networks in particular locales is proposed. The paper contributes an understanding of HCI approaches in the context of other designing participation approaches.

Investigation into submicrometer particle and gaseous emissions from airport ground running procedures

Emissions from airport operations are of significant concern because of their potential impact on local air quality and human health. The currently limited scientific knowledge of aircraft emissions is an important issue worldwide, when considering air pollution associated with airport operation, and this is especially so for ultrafine particles. This limited knowledge is due to scientific complexities associated with measuring aircraft emissions during normal operations on the ground. In particular this type of research has required the development of novel sampling techniques which must take into account aircraft plume dispersion and dilution as well as the various particle dynamics that can affect the measurements of the aircraft engine plume from an operational aircraft. In order to address this scientific problem, a novel mobile emission measurement method called the Plume Capture and Analysis System (PCAS), was developed and tested. The PCAS permits the capture and analysis of aircraft exhaust during ground level operations including landing, taxiing, takeoff and idle. The PCAS uses a sampling bag to temporarily store a sample, providing sufficient time to utilize sensitive but slow instrumental techniques to be employed to measure gas and particle emissions simultaneously and to record detailed particle size distributions. The challenges in relation to the development of the technique include complexities associated with the assessment of the various particle loss and deposition mechanisms which are active during storage in the PCAS. Laboratory based assessment of the method showed that the bag sampling technique can be used to accurately measure particle emissions (e.g. particle number, mass and size distribution) from a moving aircraft or vehicle. Further assessment of the sensitivity of PCAS results to distance from the source and plume concentration was conducted in the airfield with taxiing aircraft. The results showed that the PCAS is a robust method capable of capturing the plume in only 10 seconds. The PCAS is able to account for aircraft plume dispersion and dilution at distances of 60 to 180 meters downwind of moving a aircraft along with particle deposition loss mechanisms during the measurements. Characterization of the plume in terms of particle number, mass (PM2.5), gaseous emissions and particle size distribution takes only 5 minutes allowing large numbers of tests to be completed in a short time. The results were broadly consistent and compared well with the available data. Comprehensive measurements and analyses of the aircraft plumes during various modes of the landing and takeoff (LTO) cycle (e.g. idle, taxi, landing and takeoff) were conducted at Brisbane Airport (BNE). Gaseous (NOx, CO2) emission factors, particle number and mass (PM2.5) emission factors and size distributions were determined for a range of Boeing and Airbus aircraft, as a function of aircraft type and engine thrust level. The scientific complexities including the analysis of the often multimodal particle size distributions to describe the contributions of different particle source processes during the various stages of aircraft operation were addressed through comprehensive data analysis and interpretation. The measurement results were used to develop an inventory of aircraft emissions at BNE, including all modes of the aircraft LTO cycle and ground running procedures (GRP). Measurements of the actual duration of aircraft activity in each mode of operation (time-in-mode) and compiling a comprehensive matrix of gas and particle emission rates as a function of aircraft type and engine thrust level for real world situations was crucial for developing the inventory. The significance of the resulting matrix of emission rates in this study lies in the estimate it provides of the annual particle emissions due to aircraft operations, especially in terms of particle number. In summary, this PhD thesis presents for the first time a comprehensive study of the particle and NOx emission factors and rates along with the particle size distributions from aircraft operations and provides a basis for estimating such emissions at other airports. This is a significant addition to the scientific knowledge in terms of particle emissions from aircraft operations, since the standard particle number emissions rates are not currently available for aircraft activities.

Mobile phone use while driving : an investigation of the beliefs influencing drivers’ hands-free and hand-held mobile phone use.

This study explored the psychological influences of hands-free and hand-held mobile phone use while driving. Participants were 796 Australian drivers aged 17 to 76 years who owned mobile phones. A cross-sectional survey assessed frequency of calling and text messaging while driving (overall, hands-free, hand-held) as well as drivers’ behavioural, normative, and control beliefs relating to mobile phone use while driving. Irrespective of handset type, 43% of drivers reported answering calls while driving on a daily basis, followed by making calls (36%), reading text messages (27%), and sending text messages (18%). In total, 63.9% of drivers did not own hands-free kits and, of the drivers that owned hand-free kits, 32% did not use it most or all of the time. Significant differences were found in the behavioural, normative, and control beliefs of frequent and infrequent users of both types of handset while driving. As expected, frequent users reported more advantages of, more approval from others for, and fewer barriers that would prevent them from, using either a hands-free or a hand-held mobile phone while driving than infrequent users. Campaigns to reduce mobile phone use while driving should attempt to minimise the perceived benefits of the behaviour and highlight the risks of this unsafe driving practice.

A psychosocial approach to understanding young Australians' mobile phone behaviour

This thesis by publication contributes to our knowledge of psychological factors underlying a modern day phenomenon, young people’s mobile phone behaviour. Specifically, the thesis reports a PhD program of research which adopted a social psychological approach to explore mobile phone behaviour among young Australians aged between 15 and 24 years. A particular focus of the research program was to explore both the cognitive and behavioural aspects of young people’s mobile phone behaviour which for the purposes of this thesis is defined as mobile phone involvement. The research program comprised three separate stages which were developmental in nature, in that, the findings of each stage of the research program informed the next. The overarching goal of the program of research was to improve our understanding of the psychosocial factors influencing young people’s mobile phone behaviour. To achieve this overall goal, there were a number of aims to the research program which reflect the developmental nature of this thesis. Given the limited research into the mobile phone behaviour in Australia, the first two aims of the research program were to explore patterns of mobile phone behaviour among Australian youth and explore the social psychological factors relating to their mobile phone behaviour. Following this exploration, the research program sought to develop a measure which captures the cognitive and behavioural aspects of mobile phone behaviour. Finally, the research program aimed to examine and differentiate the psychosocial predictors of young people’s frequency of mobile phone use and their level of involvement with their mobile phone. Both qualitative and quantitative methodologies were used throughout the program of research. Five papers prepared during the three stages of the research program form the bulk of this thesis. The first stage of the research program was a qualitative investigation of young people’s mobile phone behaviour. Thirty-two young Australians participated in a series of focus groups in which they discussed their mobile phone behaviour. Thematic data analysis explored patterns of mobile phone behaviour among young people, developed an understanding of psychological factors influencing their use of mobile phones, and identified that symptoms of addiction were emerging in young people’s mobile phone behaviour. Two papers (Papers 1 and 2) emanated from this first stage of the research program. Paper 1 explored patterns of mobile phone behaviour and revealed that mobile phones were perceived as being highly beneficial to young people’s lives, with the ability to remain in constant contact with others being particularly valued. The paper also identified that symptoms of behavioural addiction including withdrawal, cognitive and behavioural salience, and loss of control, emerged in participants’ descriptions of their mobile phone behaviour. Paper 2 explored how young people’s need to belong and their social identity (two constructs previously unexplored in the context of mobile phone behaviour) related to their mobile phone behaviour. It was revealed that young people use their mobile phones to facilitate social attachments. Additionally, friends and peers influenced young people’s mobile phone behaviour; for example, their choice of mobile phone carrier and their most frequent type of mobile phone use. These papers laid the foundation for the further investigation of addictive patterns of behaviour and the role of social psychological factors on young people’s mobile behaviour throughout the research program. Stage 2 of the research program focussed on developing a new parsimonious measure of mobile phone behaviour, the Mobile Phone Involvement Questionnaire (MPIQ), which captured the cognitive and behavioural aspects of mobile phone use. Additionally, the stage included a preliminary exploration of factors influencing young people’s mobile phone behaviour. Participants (N = 946) completed a questionnaire which included a pool of items assessing symptoms of behavioural addiction, the uses and gratifications relating to mobile phone use, and self-identity and validation from others in the context of mobile phone behaviour. Two papers (Papers 3 & 4) emanated from the second stage of the research program. Paper 3 provided an important link between the qualitative and quantitative components of the research program. Qualitative data from Stage 1 indicated the reasons young people use their mobile phones and identified addictive characteristics present in young people’s mobile phone behaviour. Results of the quantitative study conducted in Stage 2 of the research program revealed the uses and gratifications relating to young people’s mobile phone behaviour and the effect of these gratifications on young people’s frequency of mobile phone use and three indicators of addiction, withdrawal, salience, and loss of control. Three major uses and gratifications: self (such as feeling good or as a fashion item), social (such as contacting friends), and security (such as use in an emergency) were found to underlie much of young people’s mobile phone behaviour. Self and social gratifications predicted young people’s frequency of mobile phone use and the three indicators of addiction but security gratifications did not. These results provided an important foundation for the inclusion of more specific psychosocial predictors in the later stages of the research program. Paper 4 reported the development of the mobile phone involvement questionnaire and a preliminary exploration of the effect of self-identity and validation from others on young people’s mobile phone behaviour. The MPIQ assessed a unitary construct and was a reliable measure amongst this cohort. Results found that self-identity influenced the frequency of young people’s use whereas self-identity and validation from others influenced their level of mobile phone involvement. These findings provided an important indication that, in addition to self factors, other people have a strong influence on young people’s involvement with their mobile phone and that mobile phone involvement is conceptually different to frequency of mobile phone use. Stage 3 of the research program empirically examined the psychosocial predictors of young people’s mobile behaviour and one paper, Paper 5, emanated from this stage. Young people (N = 292) from throughout Australia completed an online survey assessing the role of self-identity, ingroup norm, the need to belong, and self-esteem on their frequency of mobile phone use and their mobile phone involvement. Self-identity was the only psychosocial predictor of young people’s frequency of mobile phone use. In contrast, self-identity, ingroup norm, and need to belong all influenced young people’s level of involvement with their mobile phone. Additionally, the effect of self-esteem on young people’s mobile phone involvement was mediated by their need to belong. These results indicate that young people who perceive their mobile phone to be an integral part of their self-identity, who perceive that mobile phone is common amongst friends and peers, and who have a strong need for attachment to others, in some cases driven by a desire to enhance their self-esteem, are most likely to become highly involved with their mobile phones. Overall, this PhD program of research has provided an important contribution to our understanding of young Australians’ mobile phone behaviour. Results of the program have broadened our knowledge of factors influencing mobile phone behaviour beyond the approaches used in previous research. The use of various social psychological theories combined with a behavioural addiction framework provided a novel examination of young people’s mobile behaviour. In particular, the development of a new measure of mobile phone behaviour in the research program facilitated the differentiation of the psychosocial factors influencing frequency of young people’s mobile phone behaviour and their level of involvement with their mobile phone. Results of the research program indicate the important role that mobile phone behaviour plays in young people’s social development and also signals the characteristics of those people who may become highly involved with their mobile phone. Future research could build on this thesis by exploring whether mobile phones are affecting traditional social psychological processes and whether the results in this research program are generalisable to other cohorts and other communication technologies.

Exploring Chinese consumer's perceptions of using new mobile technology : A qualitative study

This study examines the case of Chinese consumer's intention to adopt the upcoming mobile technology, 3G. The qualitative study involved 45 in-depth intervie3ws undertaken in three major Chemise cities to explore what perceptions, beliefs and attitudes will influence their decisions about adopting 3G. Perceived beliefs about using 3G technology were found to be important determinants. Additionally, there was evidence of influences from their social network that could motivate the adoption behaviour, as well as influence from the secondary information sources, such as the media and the Internet. Finally, some constraints were identifies that may inhibit Chinese consumers' adoption of this technology.

Conveying identity with mobile content

A series of mobile phone prototypes called The Swarm have been developed in response to the user needs identified in a three-year empirical study of young people’s use of mobile phones. The prototypes take cues from user led innovation and provide multiple avatars that allow individuals to define and manage their own virtual identity. This paper briefly maps the evolution of the prototypes and then describes how the pre-defined, color coded avatars in the latest version are being given greater context and personalization through the use of digital images. This not only gives ‘serendipity a nudge’ by allowing groups to come together more easily, it provides contextual information that can reduce gratuitous contact.