Application of Asymmetric Marcus-Hush Theory to Voltammetry in Room-Temperature Ionic Liquids

Asymmetric MarcusHush (AMH) theory is applied for the first time in ionic solvents to model the voltammetric reduction of oxygen in 1-butyl-1-methylpyrrolidinium bis-(trifluoromethylsulfonyl)-imide and of 2-nitrotoluene (2-NT), nitrocyclopentane (NCP), and 1-nitro-butane (BuN) in trihexyltetradecylphosphonium tris(pentafluoroethyl)trifluorophosphate on a gold microdisc electrode. An asymmetry parameter, gamma, was estimated for all systems as -0.4 for the reduction of oxygen and -0.05, 0.25, and 0 +/- 0.05 for the reductions of 2-NT, NCP, and BuN, respectively, which suggests equal force constants of reactants and products in the case of 2-NT and BuN and unequal force constants for oxygen and NCP where the force constants of the oxidized species are greater than the reduced species in the case of oxygen and less than the reduced species in the case of NCP. Previously measured values for a, the Butler-Volmer transfer coefficient, reflect this in each case. Where appreciable asymmetry occurs, AMH theory was seen to parametrize the experimental data better than either Butler-Volmer or symmetric Marcus-Hush theory, allowing additionally the extraction of reorganization energy. This is the first study to provide key physical insights into electrochemical systems in room-temperature ionic liquids using AMH theory, allowing elucidation of the reorganization energies and the relative force constants of the reactants and products in each reaction.

Naphthenic acid extraction and speciation from Doba crude oil using carbonate-based ionic liquids

A number of tetraalkylammonium methylcarbonate and hydrogencarbonate based ionic liquids are shown to be capable of reacting with the naphthenic acids contained in Doba crude oil via a neutralisation reaction. Spectral studies show that the ionic liquids neutralisation mechanism involves the formation of an ionic liquid-naphthenate complex, liberating methanol and carbon dioxide. Extraction of the neutralised complex into a separate methanol phase and subsequent regeneration using aqueous carbonic acid results in ∼70% of the ionic liquid being recovered for recycle. Isolation of the naphthenic acids shows that these make up to 0.85 wt% of the crude oil. Speciation of the naphthenic acids shows a mixture of monocyclic, through to tetracyclic structures with carbon numbers in the range C₁₂-C₄₀.

Genetic mapping of the rice ionome in leaves and grain:Identification of QTLs for 17 elements including arsenic, cadmium, iron and selenium

Research into the composition of cereal grains is motivated by increased interest in food quality. Here multi-element analysis is conducted on leaves and grain of the Bala x Azucena rice mapping population grown in the field. Quantitative trait loci (QTLs) for the concentration of 17 elements were detected, revealing 36 QTLs for leaves and 41 for grains. Epistasis was detected for most elements. There was very little correlation between leaf and grain element concentrations. For selenium, lead, phosphorus and magnesium QTLs were detected in the same location for both tissues. In general, there were no major QTL clusters, suggesting separate regulation of each element. QTLs for grain iron, zinc, molybdenum and selenium are potential targets for marker assisted selection to improve seed nutritional quality. An epistatic interaction for grain arsenic also looks promising to decrease the concentration of this carcinogenic element. © Springer Science+Business Media B.V. 2009.

Formation of soluble mercury oxide coatings: transformation of elemental mercury in soils

The impact of mercury (Hg) on human and ecological health has been known for decades. Although a treaty signed in 2013 by 147 nations regulates future large-scale mercury emissions, legacy Hg contamination exists worldwide and small scale releases will continue. The fate of elemental mercury, Hg(0), lost to the subsurface and its potential chemical transformation that can lead to changes in speciation and mobility are poorly understood. Here we show that Hg(0) beads interact with soil or manganese oxide solids and x-ray spectroscopic analysis indicates that the soluble mercury coatings are HgO. Dissolution studies show that after reacting with a composite soil, > 20 times more Hg is released into water from the coated beads than from a pure liquid mercury bead. An even larger, > 700 times, release occurs from coated Hg(0) beads that have been reacted with manganese oxide, suggesting that manganese oxides are involved in the transformation of the Hg(0) beads and creation of the soluble mercury coatings. Although the coatings may inhibit Hg(0) evaporation, the high solubility of the coatings can enhance Hg(II) migration away from the Hg(0)-spill site and result in potential changes in mercury speciation in the soil and increased mercury mobility.

Carbons, Ionic Liquids, and Quinones for Electrochemical Capacitors

Carbons are the main electrode materials used in supercapacitors, which are electrochemical energy storage devices with high power densities and long cycling lifetimes. However, increasing their energy density capacity will improve their potential for commercial implementation.
In this regard, the use of high surface area carbons and high voltage electrolytes are well known strategies to increase the attainable energy density, and lately ionic liquids have been explored as promising alternatives to current state of the art acetonitrile-based electrolytes. Also, in terms of safety and sustainability ionic liquids are attractive electrolyte materials for supercapacitors. In addition, it has been shown that the matching of the carbon pore size with the electrolyte ion size further increases the attainable electrochemical double layer (ECDL) capacitance and energy density.
The use of pseudocapacitive reactions can significantly increase the attainable energy density, and quinonic-based materials offer a potentially sustainable and cost effective research avenue for both the electrode and the electrolyte.
This perspective will provide an overview of the current state of the art research on supercapacitors based on combinations of carbons, ionic liquids and quinonic compounds, highlighting performances and challenges and discussing possible future research avenues. In this regard, current interest is mainly focused on strategies which may ultimately lead to commercially competitive sustainable high performance supercapacitors for different applications including those requiring mechanical flexibility and biocompatibility.

Compositonal Analysis of Potentially harmful Elements in Soils: Implications for Epidemiology and Kidney Disease

A substantial proportion of aetiological risks for many cancers and chronic diseases remain unexplained. Using geochemical soil and stream water samples collected as part of the Tellus Project studies, current research is investigating naturally occurring background levels of potentially toxic elements (PTEs) in soils and stream sediments and their possible relationship with progressive chronic kidney disease (CKD). The Tellus geological mapping project, Geological Survey Northern Ireland, collected soil sediment and stream water samples on a grid of one sample site every 2 km2 across the rural areas of Northern Ireland resulting in an excess of 6800 soil sampling locations and more than 5800 locations for stream water sampling. Accumulation of several PTEs including arsenic, cadmium, chromium, lead and mercury have been linked with human health and implicated in renal function decline. The hypothesis is that long-term exposure will result in cumulative exposure to PTEs and act as risk factor(s) for cancer and diabetes related CKD and its progression. The ‘bioavailable’ fraction of total PTE soil concentration depends on the ‘bioaccessible’ proportion through an exposure pathway. Recent work has explored this bioaccessible fraction for a range of PTEs across Northern Ireland. In this study the compositional nature of the multivariate geochemical PTE variables and bioaccessible data is explored to augment the investigation into the potential relationship between PTEs, bioaccessibility and disease data.

Cadmium phytotoxicity and trophic transfer to isopods

O cádmio (Cd) é um metal não essencial e é considerado um poluente prioritário pela comunidade europeia. Este metal atinge o ambiente no decurso de várias actividades antropogénicas e tende a concentrar-se nos solos e sedimentos, onde está potencialmente disponível para as plantas, sendo posteriormente transferido através da cadeia trófica. Neste contexto, o principal objectivo da presente dissertação foi o estudo dos efeitos da assimilação e da acumulação de Cd em plantas e as suas consequências para animais consumidores. Numa primeira fase, foram estudados os principais efeitos fisiológicos e genotóxicos do Cd em plantas. As plantas de alface (Lactuca sativa L.) expostas a Cd apresentaram um decréscimo na eficiência fotossintética, aumento de peroxidação lipídica e alterações significativas na actividade de enzimas de stress oxidativo. Estas alterações culminaram num decréscimo do crescimento da parte aérea no final da exposição. As respostas obtidas pelos parâmetros bioquímicos sugerem que estes poderão ser utilizados como eventuais biomarcadores em testes ecotoxicológicos com Cd em abordagens integrantes em conjunto com parâmetros clássicos. Os efeitos mutagénicos de Cd foram avaliados através da determinação da instabilidade de microsatélites (IM). Não foi observada IM, nem nas folhas nem nas raízes de plantas de alface com 5 semanas de idade expostas a 100 μM Cd durante 14 dias, no entanto observou-se IM em raízes de alface exposta a 10 μM Cd durante 28 dias desde a germinação. A idade da planta e a maior acumulação de Cd nas raízes poderão explicar os resultados obtidos. A clastogenicidade de Cd foi analisada em três espécies vegetais com diferentes capacidades de destoxificação e acumulação de metais através de citometria de fluxo. Foram detectadas alterações significativas nos parâmetros analisados em raízes alface, mas não nas espécies Thlaspi caerulescens J & C Presl e Thlaspi arvense L. Estes resultados sugerem que o stress provocado pelo Cd originou clastogenicidade como consequência da perda de porções de cromossomas, uma vez que o conteúdo de ADN nuclear diminuiu. A transferência trófica através da cadeia alimentar permanece muito pouco estudada em termos ecotoxicológicos. A distribuição subcellular de metais num organismo pode ser utilizada para compreender a transferência trófica de um metal na cadeia alimentar. Como tal, numa última parte é estudado de que modo a distribuição subcellular do Cd em plantas com perfis de acumulação de Cd distintos afecta a biodisponibilidade e transferência trófica de Cd para isópodes. A distribuição de Cd entre as 4 fracções subcelulares obtidas através de centrifugação diferencial revelou a existência de diferenças significativas entre as espécies de plantas. Estes resultados em conjunto com a avaliação directa da eficiência de assimilação (EA) de Cd individual de cada uma das quatro fracções subcelulares das plantas em estudo, resultou em informação de grande relevância para a explicação das diferenças observadas na EA de Cd por parte de isópodes alimentados com folhas de diferentes espécies de plantas. Com base nos resultados obtidos, o Cd ligado a proteínas estáveis à temperatura (e.g. metaloteoninas e fitoquelatinas) é o menos biodisponível, sendo assim o que menos contribuiu para a transferência trófica, enquanto que o Cd ligado a proteínas desnaturadas pela temperatura foi a fracção mais disponível para transferência trófica de Cd ao isópode. Estes resultados realçam a relevância ecológica da distribuição subcelular de Cd em plantas que tem influência directa na tranferência trófica deste metal para os consumidores e ainda o facto de que alterações na distribuição subcelular de Cd em plantas devido a diferentes mecanismos de destoxificação poderá ter um impacto directo na transferência trófica de Cd para o animal consumidor.

Influence of speciation in the bioavailability of cadmium to an isopod

Devido às actividades antropogénicas várias substâncias químicas têm sido introduzidas no meio ambiente em concentrações que de outro modo não ocorreriam de forma tão elevada naturalmente. Assim, o conhecimento acerca das características de um químico, tais como, o potencial para se acumular em diferentes níveis tróficos, a sua mobilidade dentro do ecossistema, a toxicidade específica e a bioacumulação, é fundamental para compreender os seus efeitos nos ecossistemas. Esta tese investiga a influência de especiação, na biodisponibilidade do cádmio (Cd) para o isópode Porcellio dilatatus, incluindo os efeitos de especiação do metal: (i) na assimilação do Cd, (ii) no modo como o Cd se distribui internamente no organismo, e (iii) como a sobrevivência e a reprodução são afectadas em isópodes terrestres. Num primeiro ensaio laboratorial avaliou-se a importância da transferência trófica na assimilação do Cd em P. dilatatus. Para tal analisou-se a eficiência de assimilação (EA) do Cd em isópodes, adicionado superficialmente ao alimento (alface) na forma de Cd(NO3)2 e contaminando o meio de crescimento da alface. A hipótese era de que a alface contaminada biologicamente através do cultivo em meio hidropónico contaminado teria uma maior proporção de complexos com proteína ou conjugado na forma de Cd (ex. Cd cisteína). A EA de Cd foi maior entre os isópodes que foram alimentados com o sal (71%, SE = 7%), do que entre os isópodes que se alimentaram de alface contaminada biologicamente (52%, SE = 5%), demonstrando-se assim num teste laboratorial que é provável que a especiação do Cd influencie a taxa de assimilação e acumulação do Cd. Na experiência alimentar que se seguiu, estudou-se em detalhe a especiação do metal comparando as EA do Cd conjugado com cisteína (Cd(Cys)2) e na forma de Cd(NO3)2, com os quais se contaminou gelatina com alface. A utilização de Cd-cisteína, proporcionou uma forma experimental para explorar a biodisponibilidade do Cd complexado dentro do tecido biológico. Como esperado, a EA de Cd em isópodes alimentados com nitrato de Cd (64%, SE = 5%) foi maior do que no caso de isópodes alimentados com o conjugado de cisteína (20%, SE = 3%). De seguida estudou-se a distribuição subcelular das espécies de Cd assimilado através de um processo de fraccionamento. Supunha-se que as diferenças de especiação de Cd reflectiria diferentes estratégias de compartimentalização, com consequências ao nível da detoxificação, armazenamento celular e distribuição subcelular do metal. O “sequestro” na forma de metal biologicamente detoxificado (BDM = proteínas estáveis ao calor - HSP e grânulos ricos em metal - RMG) foi maior nos isópodes alimentados com Cd(NO3)2, sugerindo que são mais eficientes na detoxificação de Cd (22%) do que quando alimentados com Cd(Cys)2 (15%). Foi também demonstrado que os isópodes alimentados com Cd(Cys)2 possuíam níveis de armazenamento de Cd superior nas fracções sensíveis ao metal (MSF = organelos e proteínas desnaturadas pelo calor - HDP) consideradas fracções potencialmente vulneráveis e afectando os isópodes em termos de toxicidade. As diferentes distribuições internas que se seguiram à assimilação e detoxificação das diferentes espécies de Cd foram finalmente avaliadas em termos da sobrevivência e reprodução dos isópodes. O tratamento com Cd(Cys)2 teve maior mortalidade, provavelmente devido à maior disponibilidade de Cd ingerido com implicações ao nível dos processos fisiológicos. Os isópodes alimentados com Cd(NO3)2 armazenaram o Cd nos MRG, como estratégia de detoxificação, sendo mais eficientes a detoxificar o Cd ainda que aumentando a concentração total do metal que se tornou menos tóxico para o isópode. Desta forma, o Cd nos grânulos não estava disponível para os processos fisiológicos e deixou de ser tóxico. Isso poderia estar relacionado com a resistência e tolerância aos metais devido à capacidade dos isópodes compartimentalizarem o Cd no hepatopâncreas, que actua como um mecanismo de detoxificação e contribui para a tolerância a altos níveis de cádmio. Em termos de parâmetros reprodutivos, observou-se uma redução de gestações e duração da gestação na presença de ambas as espécies de metal, mas no caso do Cd(Cys)2 as gravidezes não se concluíram. O número de jovens produzido por fêmeas alimentadas com Cd(NO3)2 foi menor do que no controlo, mas os pesos dos juvenis foram superiores. Finalmente sugere-se assim que esta abordagem seja considerada em estudos do movimento trófico de metais nas cadeias alimentares dado que se espera que a especiação de metais implique diferentes fluxos, dentro de uma dada cadeia trófica.

Mercaptans extraction from jet-fuel streams using ionic liquids

Desulfurization is one of the most important processes in the refining industry. Due to a growing concern about the risks to human health and environment, associated with the emissions of sulfur compounds, legislation has become more stringent, requiring a drastic reduction in the sulfur content of fuel to levels close to zero (< 10 ppm S). However, conventional desulfurization processes are inefficient and have high operating costs. This scenario stimulates the improvement of existing processes and the development of new and more efficient technologies. Aiming at overcoming these shortcomings, this work investigates an alternative desulfurization process using ionic liquids for the removal of mercaptans from "jet fuel" streams. The screening and selection of the most suitable ionic liquid were performed based on experimental and COSMO-RS predicted liquid-liquid equilibrium data. A model feed of 1-hexanethiol and n-dodecane was selected to represent a jet-fuel stream. High selectivities were determined, as a result of the low mutual solubility between the ionic liquid and the hydrocarbon matrix, proving the potential use of the ionic liquid, which prevents the loss of fuel for the solvent. The distribution ratios of mercaptans towards the ionic liquids were not as favorable, making the traditional liquid-liquid extraction processes not suitable for the removal of aliphatic S-compounds due to the high volume of extractant required. This work explores alternative methods and proposes the use of ionic liquids in a separation process assisted by membranes. In the process proposed the ionic liquid is used as extracting solvent of the sulfur species, in a hollow fiber membrane contactor, without co-extracting the other jet-fuel compound. In a second contactor, the ionic liquid is regenerated applying a sweep gas stripping, which allows for its reuse in a closed loop between the two membrane contactors. This integrated extraction/regeneration process of desulfurization produced a jet-fuel model with sulfur content lower than 2 ppm of S, as envisaged by legislation for the use of ultra-low sulfur jet-fuel. This result confirms the high potential for development of ultra-deep desulfurization application.

Electromechanical properties of engineered lead free potassium sodium niobate based materials

K0.5Na0.5NbO3 (KNN), is the most promising lead free material for substituting lead zirconate titanate (PZT) which is still the market leader used for sensors and actuators. To make KNN a real competitor, it is necessary to understand and to improve its properties. This goal is pursued in the present work via different approaches aiming to study KNN intrinsic properties and then to identify appropriate strategies like doping and texturing for designing better KNN materials for an intended application. Hence, polycrystalline KNN ceramics (undoped, non-stoichiometric; NST and doped), high-quality KNN single crystals and textured KNN based ceramics were successfully synthesized and characterized in this work. Polycrystalline undoped, non-stoichiometric (NST) and Mn doped KNN ceramics were prepared by conventional ceramic processing. Structure, microstructure and electrical properties were measured. It was observed that the window for mono-phasic compositions was very narrow for both NST ceramics and Mn doped ceramics. For NST ceramics the variation of A/B ratio influenced the polarization (P-E) hysteresis loop and better piezoelectric and dielectric responses could be found for small stoichiometry deviations (A/B = 0.97). Regarding Mn doping, as compared to undoped KNN which showed leaky polarization (P-E) hysteresis loops, B-site Mn doped ceramics showed a well saturated, less-leaky hysteresis loop and a significant properties improvement. Impedance spectroscopy was used to assess the role of Mn and a relation between charge transport – defects and ferroelectric response in K0.5Na0.5NbO3 (KNN) and Mn doped KNN ceramics could be established. At room temperature the conduction in KNN which is associated with holes transport is suppressed by Mn doping. Hence Mn addition increases the resistivity of the ceramic, which proved to be very helpful for improving the saturation of the P-E loop. At high temperatures the conduction is dominated by the motion of ionized oxygen vacancies whose concentration increases with Mn doping. Single crystals of potassium sodium niobate (KNN) were grown by a modified high temperature flux method. A boron-modified flux was used to obtain the crystals at a relatively low temperature. XRD, EDS and ICP analysis proved the chemical and crystallographic quality of the crystals. The grown KNN crystals exhibit higher dielectric permittivity (29,100) at the tetragonal-to-cubic phase transition temperature, higher remnant polarization (19.4 μC/cm2) and piezoelectric coefficient (160 pC/N) when compared with the standard KNN ceramics. KNN single crystals domain structure was characterized for the first time by piezoforce response microscopy. It could be observed that <001> - oriented potassium sodium niobate (KNN) single crystals reveal a long range ordered domain pattern of parallel 180° domains with zig-zag 90° domains. From the comparison of KNN Single crystals to ceramics, It is argued that the presence in KNN single crystal (and absence in KNN ceramics) of such a long range order specific domain pattern that is its fingerprint accounts for the improved properties of single crystals. These results have broad implications for the expanded use of KNN materials, by establishing a relation between the domain patterns and the dielectric and ferroelectric response of single crystals and ceramics and by indicating ways of achieving maximised properties in KNN materials. Polarized Raman analysis of ferroelectric potassium sodium niobate (K0.5Na0.5)NbO3 (KNN) single crystals was performed. For the first time, an evidence is provided that supports the assignment of KNN single crystals structure to the monoclinic symmetry at room temperature. Intensities of A′, A″ and mixed A′+A″ phonons have been theoretically calculated and compared with the experimental data in dependence of crystal rotation, which allowed the precise determination of the Raman tensor coefficients for (non-leaking) modes in monoclinic KNN. In relation to the previous literature, this study clarifies that assigning monoclinic phase is more suitable than the orthorhombic one. In addition, this study is the basis for non-destructive assessments of domain distribution by Raman spectroscopy in KNN-based lead-free ferroelectrics with complex structures. Searching a deeper understanding of the electrical behaviour of both KNN single crystal and polycrystalline materials for the sake of designing optimized KNN materials, a comparative study at the level of charge transport and point defects was carried out by impedance spectroscopy. KNN single crystals showed lower conductivity than polycrystals from room temperature up to 200 ºC, but above this temperature polycrystalline KNN displays lower conductivity. The low temperature (T < 200 ºC) behaviour reflects the different processing conditions of both ceramics and single crystals, which account for less defects prone to charge transport in the case of single crystals. As temperature increases (T > 200 ºC) single crystals become more conductive than polycrystalline samples, in which grain boundaries act as barriers to charge transport. For even higher temperatures the conductivity difference between both is increased due to the contribution of ionic conduction in single crystals. Indeed the values of activation energy calculated to the high temperature range (T > 300 ºC) were 1.60 and 0.97 eV, confirming the charge transport due to ionic conduction and ionized oxygen vacancies in single crystals and polycrystalline KNN, respectively. It is suggested that single crystals with low defects content and improved electromechanical properties could be a better choice for room temperature applications, though at high temperatures less conductive ceramics may be the choice, depending on the targeted use. Aiming at engineering the properties of KNN polycrystals towards the performance of single crystals, the preparation and properties study of (001) – oriented (K0.5Na0.5)0.98Li0.02NbO3 (KNNL) ceramics obtained by templated grain growth (TGG) using KNN single crystals as templates was undertaken. The choice of KNN single crystals templates is related with their better properties and to their unique domain structure which were envisaged as a tool for templating better properties in KNN ceramics too. X-ray diffraction analysis revealed for the templated ceramics a monoclinic structure at room temperature and a Lotgering factor (f) of 40% which confirmed texture development. These textured ceramics exhibit a long range ordered domain pattern consisting of 90º and 180º domains, similar to the one observed in the single crystals. Enhanced dielectric (13017 at TC), ferroelectric (2Pr = 42.8 μC/cm2) and piezoelectric (d33 = 280 pC/N) properties are observed for textured KNNL ceramics as compared to the randomly oriented ones. This behaviour is suggested to be due to the long range ordered domain patterns observed in the textured ceramics. The obtained results as compared with the data previously reported on texture KNN based ceramics confirm that superior properties were found due to ordered repeated domain pattern. This study provides an useful approach towards properties improvement of KNN-based piezoelectric ceramics. Overall, the present results bring a significant contribution to the pool of knowledge on the properties of sodium potassium niobate materials: a relation between the domain patterns and di-, ferro-, and piezo-electric response of single crystals and ceramics was demonstrated and ways of engineering maximised properties in KNN materials, for example by texturing were established. This contribution is envisaged to have broad implications for the expanded use of KNN over the alternative lead-based materials.

Removal of cyanobacteria and cyanotoxins from drinking water by powdered activated carbon adsorption/ultrafiltration

Tese dout., Ciências e Tecnologias do Ambiente, Universidade do Algarve, 2009

Development of new technologies for the selective removal of volatile compounds with applications in forensic science and natural aromas

Tese de doutoramento, Farmácia (Química Farmacêutica e Terapêutica), Universidade de Lisboa, Faculdade de Farmácia, 2015

Development of new membranes based on ionic liquid materials for gas separation

In the field of energy, natural gas is an essential bridge to a clean, low carbon, renewable energy era. However, natural gas processing and transportation regulation require the removal of contaminant compounds such as carbon dioxide (CO2). Regarding clean air, the increasing atmospheric concentrations of greenhouse gases, specifically CO2, is of particular concern. Therefore, new costeffective, high performance technologies for carbon capture have been researched and the design of materials with the ability to efficiently separate CO2 from other gases is of vital importance.(...)

Arsenic and germanium determination by hydride generation in the D.C. plasma optical emission spectrometer

Modifications to the commercial hydride generator, manufactured by Spectrametrics, resulted in improved operating procedure and enhancement of the arsenic and germanium signals. Experiments with arsenic(III) and arsenic(V) showed that identical reiults could be produced from both oxidation states. However, since arsenic(V) is reduced more slowly than arsenic(III), peak areas and not peak heights must be measured when the arsine is immediately stripped from the system (approximately 5 seconds reaction). When the reduction is allowed to proceed for 20 seconds before the arsine is stripped, peak heights may be used. For a 200 ng/mL solution, the relative standard deviation is 2.8% for As(III) and 3.8% for As(V). The detection limit for arsenic using the modified system is 0.50 ng/mL. Studies performed on As(V) standards show that the interferences from 1000 mg/L of nickel(II), cobalt(II), iron(III), copper(II), cadmium(II), and zinc(II) can be eliminated with the aid of 5 M Hel and 3% L-cystine. Conditions for the reduction of germanium to the corresponding hydride were investigated. The effect of different concentrations of HCl on the reduction of germanium to the covalent hydride in aqueous media by means of NaBH 4 solutions was assessed. Results show that the best response is accomplished at a pH of 1.7. The use of buffer solutions was similarly characterized. In both cases, results showed that the element is best reduced when the final pH of the solution after reaction is almost neutral. In addition, a more sensitive method, which includes the use of (NH4)2S208' has been developed. A 20% increase in the germanium signal is registered when compared to the signal achieved with Hel alone. Moreover, under these conditions, reduction of germanium could be accomplished, even when the solution's pH is neutral. For a 100 ng/mL germanium standard the rsd is 3%. The detection limit for germanium in 0.05 M Hel medium (pH 1.7) is 0.10 ng/mL and 0.09 ng/mL when ammonium persulphate is used in conjunction with Hel. Interferences from 1000 mg/L of iron(III), copper(II), cobalt(II), nickel(II), cadmium(II), lead(II), mercury(II), aluminum(III), tin(IV), arsenic(III), arsenic(V) and zinc(II) were studied and characterized. In this regard, the use of (NH4)ZS20S and Hel at a pH of 1.7 proved to be a successful mixture in the sbppression of the interferences caused by iron, copper, aluminum, tin, lead, and arsenic. The method was applied to the determination of germanium in cherts and iron ores. In addition, experiments with tin(IV) showed that a 15% increase in the tin signal can be accomplished in the presence of 1 mL of (NH4)2S20S 10% (m/V).

Societal cleavages and institutional change in Canada : retention, reform and removal of nominee councils

En concevant que toute société a deux clivages dominants, l’un social et l’autre partisan, cette thèse développe une théorie sur le changement institutionnel. L’hypothèse initiale, selon laquelle les groupes sociaux créés par le premier clivage agiront pour restreindre le changement institutionnel et que le changement aura lieu lors de l’émergence d’un groupe partisan capable de croiser le clivage social, fut testée par les processus traçant les changements qui furent proposés et qui ont eu lieu au sein des conseils nominés en Amérique du Nord britannique. Ces conseils furent modifiés un bon nombre de fois, devenant les chambres secondaires de législatures provinciales avant d’être éventuellement abolies. La preuve supporte l’hypothèse, bien qu’il ne soit pas suffisant d’avoir un groupe partisan qui puisse croiser le clivage qui mène le changement : un débat partisan sur le changement est nécessaire. Ceci remet aussi en cause la théorie prédominante selon laquelle les clivages sociaux mènent à la formation de partis politiques, suggérant qu’il est plus bénéfique d’utiliser ces deux clivages pour l’étude des institutions.