Comparison of the pharmacokinetics of oxycodone and noroxycodone in male dark agouti and Sprague-Dawley rats: Influence of streptozotocin-induced diabetes

Purpose. The aims of this study are to evaluate whether cytochrome P450 (CYP)2D1/2D2-deficient dark agouti (DA) rats and/or CYP2D1/2D2-replete Sprague-Dawley (SD) rats are suitable preclinical models of the human, with respect to mirroring the very low plasma concentrations of metabolically derived oxymorphone seen in humans following oxycodone administration, and to examine the effects of streptozotocin-induced diabetes on the pharmacokinetics of oxycodone and its metabolites, noroxycodone and oxymorphone, in both rodent strains. Methods. High-performance liquid chromatography-electrospray ionization-tandem mass spectrometry was used to quantify the serum concentrations of oxycodone, noroxycodone, and oxymorphone following subcutaneous administration of bolus doses of oxycodone (2 mg/kg) to groups of nondiabetic and diabetic rats. Results. The mean (+/- SEM) areas under the serum concentration vs. time curves for oxycodone and noroxycodone were significantly higher in DA relative to SD rats (diabetic, p < 0.05; nondiabetic, p < 0.005). Serum concentrations of oxymorphone were very low (< 6.9 nM). Conclusions. Both DA and SD rats are suitable rodent models to study oxycodone's pharmacology, as their systemic exposure to metabolically derived oxymorphone (potent mu-opioid agonist) is very low, mirroring that seen in humans following oxycodone administration. Systemic exposure to oxycodone and noroxycodone was consistently higher for DA than for SD rats showing that strain differences predominated over diabetes status.

High performance liquid level monitoring system based on polymer fiber Bragg gratings embedded in silicone rubber diaphragm

Liquid-level sensing technologies have attracted great prominence, because such measurements are essential to industrial applications, such as fuel storage, flood warning and in the biochemical industry. Traditional liquid level sensors are based on electromechanical techniques; however they suffer from intrinsic safety concerns in explosive environments. In recent years, given that optical fiber sensors have lots of well-established advantages such as high accuracy, costeffectiveness, compact size, and ease of multiplexing, several optical fiber liquid level sensors have been investigated which are based on different operating principles such as side-polishing the cladding and a portion of core, using a spiral side-emitting optical fiber or using silica fiber gratings. The present work proposes a novel and highly sensitive liquid level sensor making use of polymer optical fiber Bragg gratings (POFBGs). The key elements of the system are a set of POFBGs embedded in silicone rubber diaphragms. This is a new development building on the idea of determining liquid level by measuring the pressure at the bottom of a liquid container, however it has a number of critical advantages. The system features several FBG-based pressure sensors as described above placed at different depths. Any sensor above the surface of the liquid will read the same ambient pressure. Sensors below the surface of the liquid will read pressures that increase linearly with depth. The position of the liquid surface can therefore be approximately identified as lying between the first sensor to read an above-ambient pressure and the next higher sensor. This level of precision would not in general be sufficient for most liquid level monitoring applications; however a much more precise determination of liquid level can be made by linear regression to the pressure readings from the sub-surface sensors. There are numerous advantages to this multi-sensor approach. First, the use of linear regression using multiple sensors is inherently more accurate than using a single pressure reading to estimate depth. Second, common mode temperature induced wavelength shifts in the individual sensors are automatically compensated. Thirdly, temperature induced changes in the sensor pressure sensitivity are also compensated. Fourthly, the approach provides the possibility to detect and compensate for malfunctioning sensors. Finally, the system is immune to changes in the density of the monitored fluid and even to changes in the effective force of gravity, as might be obtained in an aerospace application. The performance of an individual sensor was characterized and displays a sensitivity (54 pm/cm), enhanced by more than a factor of 2 when compared to a sensor head configuration based on a silica FBG published in the literature, resulting from the much lower elastic modulus of POF. Furthermore, the temperature/humidity behavior and measurement resolution were also studied in detail. The proposed configuration also displays a highly linear response, high resolution and good repeatability. The results suggest the new configuration can be a useful tool in many different applications, such as aircraft fuel monitoring, and biochemical and environmental sensing, where accuracy and stability are fundamental. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

High performance liquid-level sensor based on mPOFBG for aircraft applications

A high performance liquid-level sensor based on microstructured polymer optical fiber Bragg grating (mPOFBG) array sensors is reported in detail. The sensor sensitivity is found to be 98pm/cm of liquid, enhanced by more than a factor of 9 compared to a reported silica fiber-based sensor.

Analysis of early synthetic dyes with HPLC-DAD-MS: an important database for analysis of colorants used in cultural heritage

Presented thesis at Faculdade de Ciências e Tecnologias, Universidade de Lisboa, to obtain the Master Degree in Conservation and Restoration of Textiles

Determinació de diferents compostos bioactius en ingredients naturals per a l'elaboració de bombons funcionals amb beneficis cardiovasculars

Durant les darreres dècades, i degut, principalment, a un canvi en els hàbits alimentaris, hi ha hagut un augment a nivell mundial de malalties cròniques (l’obesitat, malalties cardiovasculars, etc.). En els països mediterranis hi ha menys incidència d’aquestes malalties i sembla ser que això es deu a l’anomenada dieta mediterrània. La dieta mediterrània es caracteritza per una combinació d’oli d’oliva com a grassa principal, verdures, hortalisses i fruites en abundància, lleguminoses, fruits secs, formatges i iogurt, peix, pa, pasta, cereals i els seus derivats i un consum moderat de vi i carns. Aquest model alimentari, ric en tocoferols, fitosterols i fitoestanols que ajuden a reduir el contingut de colesterol en sang, fa que en les poblacions mediterrànies hi hagi menys incidència de malalties cardiovasculars. Aquests compostos inhibeixen el deteriorament oxidatiu dels olis, actuen com agent antipolimerització per olis de fregir. Tenen capacitat de reduir els nivells de colesterol, evitant la incidència de malalties cardiovasculars. Els fitoesterols y fitoestanols es poden trobar en forma lliure o esterificada amb àcids grassos, àcids fenòlics i glucosa. Els objectius d’ aquest treball han estat, primer en el desenvolupament de mètodes d'anàlisi ràpids, fiables i robusts dels tocoferols, fitoesterols i fitoestanols i la seva aplicació en fruits sec, oli de segó, oli de pinyol de raïm i productes que els continguin. El primer mètode va estar basat en la cromatografía líquida (HPLC-DAD) amb extracció en fase sòlida (SPE) com tècnica alternativa a la saponificació para la determinació de fitoesterols lliures. Aquest mètode va estar aplicada a mostres de bombons que contenia fitoesterols. El segon mètode va estar basat en la cromatografia de gasos (GCFID) amb aponificació i SPE per quantificar fitoesterols i fitoestanols lliures, esterificats i totals. En els documents annexos es descriuen a profunditat els mètodes desenvolupats.

A need for determination of arsenic species at low levels in cereal-based food and infant cereals. Validation of a method by LC-ICPMS.

The present study arose from the need to determine inorganic arsenic (iAs) at low levels in cereal-based food. Validated methods with a low limit of detection (LOD) are required to analyse these kinds of food. An analytical method for the determination of iAs, methylarsonic acid (MA) and dimethylarsinic acid (DMA) in cereal-based food and infant cereals is reported. The method was optimised and validated to achieve low LODs. Ion chromatography-inductively coupled plasma mass spectrometry (LC-ICPMS) was used for arsenic speciation. The main quality parameters were established. To expand the applicability of the method, different cereal products were analysed: bread, biscuits, breakfast cereals, wheat flour, corn snacks, pasta and infant cereals. The total and inorganic arsenic content of 29 cereal-based food samples ranged between 3.7-35.6 and 3.1-26.0 microg As kg-1, respectively. The present method could be considered a valuable tool for assessing inorganic arsenic contents in cereal-based foods.

A need for determination of arsenic species at low levels in cereal-based food and infant cereals. Validation of a method by LC-ICPMS.

The present study arose from the need to determine inorganic arsenic (iAs) at low levels in cereal-based food. Validated methods with a low limit of detection (LOD) are required to analyse these kinds of food. An analytical method for the determination of iAs, methylarsonic acid (MA) and dimethylarsinic acid (DMA) in cereal-based food and infant cereals is reported. The method was optimised and validated to achieve low LODs. Ion chromatography-inductively coupled plasma mass spectrometry (LC-ICPMS) was used for arsenic speciation. The main quality parameters were established. To expand the applicability of the method, different cereal products were analysed: bread, biscuits, breakfast cereals, wheat flour, corn snacks, pasta and infant cereals. The total and inorganic arsenic content of 29 cereal-based food samples ranged between 3.7-35.6 and 3.1-26.0 microg As kg-1, respectively. The present method could be considered a valuable tool for assessing inorganic arsenic contents in cereal-based foods.

Étude du continuum exposition-effet cancérogène du benzo[a]pyrène

Le benzo[a]pyrène (BaP) est un contaminant environnemental de la famille des hydrocarbures aromatiques polycycliques ayant été classé cancérogène chez l’humain. Cependant, la relation entre l’exposition et les effets est toujours mal documentée. L’objectif de cette thèse était de mieux documenter la relation quantitative entre l’exposition au BaP, l’évolution temporelle des biomarqueurs d’exposition et l’apparition d’altérations biologiques précoces, à partir d’études expérimentales chez le rat. Dans un premier temps, nous avons déterminé l’effet de 4 doses de BaP (0.4, 4, 10 et 40 µmol/kg) sur plusieurs biomarqueurs d’exposition (3- et 7-OHBaP, 4,5- et 7,8-diolBaP, BaPtétrol et 1,6-, 3,6- et 7,8-diones-BaP), les adduits à l’ADN et l’expression de gènes impliqués dans le métabolisme du BaP, la réparation de l’ADN et le stress oxydatif. Le BaP et ses métabolites ont été mesurés dans le sang, les tissus et les excrétas, 8 h et 24 h après l’administration intraveineuse de BaP par chromatographie liquide à ultra haute performance (UHPLC) couplée à la fluorescence. Les adduits à l’ADN ont été quantifiés dans les poumons par immuno-essai en chémoluminescence. L’expression des gènes dans les poumons a été réalisée par PCR quantitative en temps réel (qRT-PCR). Les résultats ont révélé une bonne relation dose-excrétion pour le 3-OHBaP, le 4,5-diolBaP et le 7,8-diolBaP et ils ont également renforcé l’utilité du 4,5-diolBaP comme potentiel biomarqueur du BaP en plus du 3-OHBaP. De plus, l’augmentation dose-dépendante de la formation des adduits et de l’expression de certains gènes impliqués dans le métabolisme et le stress oxydatif a suggéré l’intérêt de ces derniers comme biomarqueurs d’effet précoce. Dans un second temps, nous avons évaluer le profil cinétique des biomarqueurs en lien avec la modulation temporelle de la formation des adduits à l’ADN et de l’expression génique, en utilisant la dose de 40 µmol/kg de BaP telle qu’établie dans l’étude précédente, avec une série de mesures sur une durée de 72 h après l’injection intraveineuse de BaP. Il est apparu que le 3- et le 7-OHBaP ainsi que le 4,5- et le 7,8-diolBaP semblaient être de bons biomarqueurs d'exposition; les hydroxyBaP et diolBaP présentaient des cinétiques différentes, mais tous ces métabolites étaient corrélés de façon significative aux adduits BaPDE dans les poumons. L’expression de certains gènes et l’étude de leur profil cinétique a également permis de faire des liens avec la formation des adduits et de mieux comprendre le métabolisme du BaP. Après ces résultats, il semblait alors logique de s’intéresser à l’effet de la voie d’exposition dans un context d’exposition multiple de la population. Les données mesurées dans le sang et les excréta, après administration de 40 µmol/kg de BaP par voie intraveineuse, intratrachéale, orale, et cutanée, ont encore une fois montré l'intérêt de mesurer plusieurs métabolites pour l’évaluation de l’exposition en raison des différences en fonction de la voie d’administration du composé et des différences dans la cinétique de plusieurs biomarqueurs, notamment entre les hydroxy (3- et 7-OHBaP) et les diols-BaP (4,5- et 7,8-diolBaP). Les résultats suggèrent aussi que la mesure de ratios de concentrations de différents métabolites pourrait aider à indiquer le moment et la principale voie d’exposition. Ces données ont permis une meilleure compréhension du continuum entre l’exposition et les effets.

Comparison of lung tissue concentrations of nebulized ceftazidime in ventilated piglets: ultrasonic versus vibrating plate nebulizers

Objective: To compare the efficiency of an Aeroneb Pro vibrating plate and an Atomisor MegaHertz ultrasonic nebulizer for providing ceftazidime distal lung deposition.Design: In vitro experiments. One gram of cetazidime was nebulized in respiratory circuits and mass median aerodynamic diameter of particles generated by ultrasonic and vibrating plate nebulizers was compared using a laser velocimeter. In vivo experiments. Lung tissue concentrations and extrapulmonary depositions were measured in ten anesthetized ventilated piglets with healthy lungs that received 1 g of ceftazidime by nebulization with either an ultrasonic (n = 5), or a vibrating plate (n = 5) nebulizer.Setting: A two-bed Experimental Intensive Care Unit of a University School of Medicine.Intervention: Following sacrifice, 5 subpleural specimens were sampled in dependent and nondependent lung regions for measuring ceftazidime lung tissue concentrations by high-performance liquid chromatography.Measurements and results: Mass median aerodynamic diameters generated by both nebulizers were similar with more than 95% of the particles between 0.5 and 5 mu m. Lung tissue concentrations were 553 +/- 123 [95% confidence interval: 514-638] mu g g(-1) using ultrasonic nebulizer, and 452 +/- 172 [95% confidence interval: 376-528] mu g g(-1) using vibrating plate nebulizers (NS). Extrapulmonary depositions were, respectively, of 38 +/- 5% (ultrasonic) and 34 +/- 4% (vibrating plate) (NS).Conclusions: Vibrating plate nebulizer is comparable to ultrasonic nebulizers for ceftazidime nebulization. It may represent a new attractive technology for inhaled antibiotic therapy.

Development of an HPLC-UV/Vis method for the determination of dyes in a gasoline sample employing different pre-treatments

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Identification of the antimicrobial substances produced by Solanum palinacanthum (Solanaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Enzymatic and oxidative metabolites of lycopene.

Using the post-mitochondrial fraction of rat intestinal mucosa, we have investigated lycopene metabolism. The incubation media was composed of NAD+, KCI, and DTT with or without added lipoxygenase. The addition of lipoxygenase into the incubation significantly increased the production of lycopene metabolites. The enzymatic incubation products of 2H10 lycopene were separated using high-performance liquid chromatography and analyzed by UV/Vis spectrophotometer and atmospheric pressure chemical ionization-mass spectroscopy. We have identified two types of products: cleavage products and oxidation products. The cleavage products are likely: (1) 3-keto-apo-13-lycopenone (C18H24O2 or 6,10,14-trimethyl-12-one-3,5,7,9,13-pentadecapentaen-2-one) with lambdamax = 365 nm and m/z =272 and (2) 3,4-dehydro-5,6-dihydro-15-apo-lycopenal (C20H28O or 3,7,11,15-tetramethyl-2,4,6,8,12,14-hexadecahexaen-l-al) with lambdamax= 380 nm and m/z = 284. The oxidative metabolites are likely: (3) 2-ene-5,8-lycopenal-furanoxide (C37H50O) with lambdamax = 415 nm, 435 nm, and 470 nm, and m/z = 510; (4) lycopene-5, 6, 5', 6'-diepoxide (C40H56O2) with lambdamax = 415 nm, 440 nm, and 470 nm, and m/z =568; (5) lycopene-5,8-furanoxide isomer (I) (C40H56O2) with lambdamax = 410 nm, 440 nm, and 470 nm, and m/z = 552; (6) lycopene-5,8-epoxide isomer (II) (C40H56O) with lambdamax = 410, 440, 470 nm, and m/z = 552; and (7) 3-keto-lycopene-5',8'-furanoxide (C40H54O2) with lambdamax = 400 nm, 420 nm, and 450 nm, and m/z = 566. These results demonstrate that both central and excentric cleavage of lycopene occurs in the rat intestinal mucosa in the presence of soy lipoxygenase.

Caracterização da cinética de captação de glutamato por cromatografia líquida de alta eficiência em tecido retiniano

O presente estudo descreve um método eficiente e simples utilizando cromatografia líquida de alta eficiência (CLAE) acoplada a detector de fluorescência para determinação dos parâmetros cinéticos da captação de glutamato (glu) no sistema nervoso central (SNC). O tecido retiniano embrionário de ave com sete dias de desenvolvimento foi incubado com concentrações conhecidas de glu (50-500 μM) por dez minutos. Os níveis do aminoácido derivado a partir de ortoftaldeído (OPA) no meio de incubação foram mensurados. Após avaliar a diferença entre a concentração de glu inicial e a final no meio, foi determinada a saturação do mecanismo de captação (Km = 8,2 e Vmax = 9,8 nmol/mg proteína/minuto). Estas determinações foram dependentes e independentes de sódio e temperatura, indicando que o mecanismo que regula a diminuição dos níveis de glu no SNC, é a captação via transportadores de alta afinidade. Além disso, o cloreto de zinco (ZnCl) (um inibidor do transportador glu/aspartato) foi utilizado em diversas concentrações e evocou diminuição da captação de glu. Com isto, destaca-se a elevada aplicabilidade desta metodologia. Além deste trabalho caracterizar metodologia alternativa para avaliar captação de glu no SNC usando CLAE, também pode ser importante ferramenta para estudos relacionados à caracterização do transporte do neurotransmissor durante injúrias no SNC.

Peptídeos derivados da toxina ParE: síntese, estrutura e estudos de inibição de DNA topoisomerases

Pós-graduação em Biotecnologia - IQ