Caracterização mecânica e microestrutural de um aço de baixo carbono

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Enriquecimento de compostos fenólicos de folhas de Inga edulis por extração em fase sólida: quantificação de seus compostos majoritários e avaliação da capacidade antioxidante

ABSTRACT: A phenolic fraction was obtained from of the acetone-water-acetic acid extract of Inga edulis leaves, by liquid-liquid partition and SPE-C18 cartridges. This method provided an increase of 108, 66, 51, 50 and 36% of flavonols, proanthocyanidins, total polyphenols, gallotannins and flavanols, respectively. The major phenolics in purified fraction were procyanidin B2, catechin and myricetin-3-O-α-L-rhamnopyranoside, which achieved increases of 111, 47 and 45%, respectively, after SPE. Acid hydrolysis confirmed the presence of procyanidins, prodelphinidins and glycosylated flavonoids.

β-glucanas de isolados fúngicos do gênero Botryosphaeria: produção, caracterização química e atividade anticoagulante

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Síntese, caracterização e estudo do comportamento térmico dos 2-metoxicinamalpiruvatos de lantanídeos (III), exceto promécio, e ítrio (III) no estado sólido

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação de fluido de corte em quantidades reduzidas para usinagem do aço SAE 52100 no processo de retificação centerless de passagem

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Preparação e caracterização estrutural de aerogéis de sílica com diferentes concentrações de F127

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determinação de Cd, Pb e Cu em particulados atmosféricos da região de Presidente Prudente por análise voltamétrica utilizando eletrodo de mercúrio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação de suportes para a imobilização de Zymomonas mobilis CCT 4494 visando à produção de etanol e levana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sugarcane bagasse cellulose fibres and their hydrous niobium phosphate composites: synthesis and characterization by XPS, XRD and SEM

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nanocomposites of natural rubber and polyaniline-modified cellulose nanofibrils

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito de reagentes de branqueamento na classificação e refinação de polpa de eucalipto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of cellulose nanofibrils on soft and hard segments of polyurethane/cellulose nanocomposites and effect of humidity on their mechanical properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do efeito da temperatura na deslignificação com o oxigênio nas propriedades do papel

The deslignification with oxygen, also denominated pre-O2, consists in a whitening stage, which consists of accomplishing an oxidation of the lignin, and remove it with the alkali, providing a larger earnings in the bleaching of the pulp. The pre-O2 is a process already very established, where a significant part of the cellulose of whitened short fiber produced nowadays suffers deslignification for this method. The conditions of work of this stage contemplate directly in the results of the deslignification level, in the physical, optical and mechanics properties of the pulp, and consequently of the paper, because this is important to know their effects fully. The main variables related to the control of this process are respectively: pressure and oxygen load, alkaline load, consistence, time and temperature, being this last variable was the study focus in this work. The objective of the work was to analyze the effect of the variation of the temperature in the oxygen whitening along every bleaching process of the pulp, refine and in the optical, physics and mechanics properties of the paper. The development of the work was based in four temperature levels (90, 95, 100 and 105°C) combined to two whitening sequences (OD0(E+P)D1P and OAHTD0(E+P)D1P). The results obtained in the oxygen deslignification stage indicated that the elevation of the temperature contemplated in increases of the whiteness, deslignification efficiency and in the viscosity loss allied to the reduction of the selectivity of the process. In the remaining of the whitening, the sequence that included the acid hydrolysis presented values slightly inferior of whiteness, kappa number, viscosity and yield in relation to the other sequence when compared with the samples of same temperatures. Already the physical tests showed that the sequence with acid stage amplifies the values of capillary... (Complete abstract click electronic access below)

Propriedades estruturais de géis de sílica preparados com adições de dodecil sulfato de sódio

This work aims to study the structural characteristics of silica gels obtained from the acid hydrolysis of tetraethoxysilane (TEOS) in water solutions with different concentrations of sodium dodecyl sulfate (SDS). The structural characteristics were studied in stages ranging from the wet gel to the dry stages of the gels (aerogels and xerogels). Aerogels were obtained by ambient pressure drying (APD) after silylation process using trimethylchlorosilane (TMCS) as silylating agent. Xerogels were obtained by conventional evaporating the liquid phase from non silylated gels. The samples were characterized by nitrogen adsorption and small angle X-ray scattering (SAXS). The structure of the wet gels and of the aerogels prepared with the surfactant exhibited characteristics of mass-fractal structures with fractal dimension D in the range 2.1-2.2 for the wet gels and 2.3-2.4 for the aerogels. The characteristic size  of the fractal domain reduces while the size a0 of the primary silica particle composing the fractal structure increases with the drying of the gels, in a process in which share of the porosity is eliminated. Aerogels exhibited typical values for the specific surface of 900 m2g-1 and of 3.5 cm3.g-1 for the total pore volume. These values are correspondingly comparable to those of the aerogels prepared by supercritical drying, since the silylation process replaces hydrophilic –OH groups by hydrophobic –Si-R3 ones, inhibiting the porosity elimination on drying. The silica particle size also increases lightly with the silylation because the attachment of the –Si-R3 groups on the silica surface. The pore size distribution curves of the aerogels are similar for all samples exhibiting a maximum in around 40 nm, independent the concentration of surfactant. This suggests that the characteristic size of 40 nm is due to the association of surfactant micelles... (Complete abstract click electronic access below)

Compósitos de nanocelulose / PHBV: manta microfibrilica por eletrofiação

Pós-graduação em Engenharia Mecânica - FEG