Ympäristöteknologioiden verifioinnin mahdollisuudet pilaantuneiden maiden laadukkaan käsittelyn edistämisessä

EU on käynnistämässä ympäristöteknologioiden verifiointijärjestelmää, jonka avulla voidaan tarjota käyttäjille ja sijoittajille riippumatonta tietoa innovatiivisten teknologioiden toimivuudesta ja suorituskyvystä ja parantaa niiden markkina-asemaa. Verifioinnilla tarkoitetaan kolmannen osapuolen suorittamaa prosessia tai mekanismia, jonka avulla tuotteen toiminta ja suorituskyky voidaan todentaa. Kansallinen ympäristöteknologioiden verifiointijärjestelmä on käytössä mm. Yhdysvalloissa ja Kanadassa. Euroopassa järjestelmä otettaneen käyttöön vuonna 2011–2012. Suomessa tehdään nykyisin noin 300 pilaantuneen maan puhdistushanketta koskevaa lupa- ja ilmoituspäätöstä vuosittain. Noin 85 prosentissa kohteista käytetään kunnostusmenetelmänä massanvaihtoa. Massanvaihto tulee ainakin toistaiseksi säilymään yleisimpänä kunnostusmenetelmänä, mutta mm. in situ -menetelmien käytön arvioidaan lisääntyvän. Tämän diplomityön tavoitteena oli arvioida voidaanko verifiointia hyödyntää pilaantuneiden maiden laadukkaan käsittelyn edistämisessä ja voiko verifiointi nopeuttaa innovatiivisten kunnostusmenetelmien markkinoillepääsyä. Aihetta tarkasteltiin mm. kahden erityyppisen pilaantuneen maan ja pohjaveden kunnostusmenetelmän, reaktiivisten seinämien (in situ) ja bitumistabiloinnin (ex situ) kautta. Pilaantuneiden maiden kunnostusmenetelmien toimivuus riippuu monista eri tekijöistä, joista osaa ei voida hallita tai mallintaa luotettavasti. Verifiointi soveltuukin parhaiten laitteiden tai PIMA-menetelmiä yksinkertaisempien puhdistusmenetelmien suorituskyvyn todentamiseen. Verifiointi saattaa kuitenkin hyvin toimia PIMA-kunnostuksen kohdalla esimerkiksi tiedollisena ohjauskeinona. Reaktiivisten seinämien ja bitumistabiloinnin verifioinnin työvaiheet ovat hyvin samankaltaiset, suurimpana erona seinämien kohdalla tulee kuvata myös kohde johon seinämä on asennettu. Reaktiivisten seinämien toiminta on riippuvaista monista ympäristötekijöistä, toisin kuin erillisellä laitteistolla suoritettavan bitumistabiloinnin. Tulosten perusteella voidaan yleistää, että verifiointi soveltuu paremmin ex situ -, kuin in situ -kunnostusmenetelmille.

Fracionamento de metais pesados em solo contaminado antes e após cultivo de arroz

The objective of the present work was to evaluate the distribution of Cd, Cu, Mn, Pb and Zn among the different fractions of contaminated soil, before and after rice cultivation. Seven soil samples with different degrees of contamination were studied using a randomized experimental design, with four replicates. Using an ICP-OES we analyzed the contents of heavy metals in fractions of soil, the organic matter therein, the oxides and the residual content before and after rice cultivation. The largest concentrations of Cd, Cu, Mn and Zn in the soil are found in the fractions with stable chemical bonds.

The need for sustainable remediation

Humanity requires healthy soil in order to flourish. Soil is central to food production, the regulation of greenhouse gases, recreational areas such as parks and sports fields and the creation of an environment pleasing to the eye. But soil is fragile and easily damaged by uninformed management or accidents. One type of damage is contamination by chemicals that provide the lifestyles to which the developed world has become accustomed. Traditional soil "clean-up" has entailed either simple disposal or isolation of contaminated soil. Clearly this is not sustainable. Modern remedial techniques apply mineralogical and geochemical knowledge to clean up contaminated soil and make it good for reuse, rather than simply discarding this precious and finite resource.

Avaliação de processos de caracterização e remediação de passivos ambientais de contaminação por hidrocarbonetos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação ecotoxicológica da biodegradação utilizando inóculo enriquecido com Bacillus subtilis em solo contaminado com petróleo, diesel e biodiesel

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Um estudo da formação de disponibilidade de piromorfita (Pb 5(PO4)3OH) em solos contaminados com Pb e remediados com NH4H2PO4

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da elaboração do plano de descomissionamento para desativação de empreendimentos

Deconstructions, although hardly covered in Civil Engineering courses, are a very important field of study. Due to numerous factors, such as obsolescence, buildings life cycle comes to an end leading to their deactivations. Decommissioning is a process that intends to plan the hole deactivation by providing the cleaning of contaminated areas, avoiding risks to public health, as well as promoting a screening of generated waste, whether dangerous or not, offering their correct disposal or even reuse when possible. Decommissioning must be developed by a plan that covers from the recognition of the area until its releases to other uses. When this procedure is appropriate, attention must be paid to the cost effective of its implementation and to the cleaning standard that the plan intends to reach. The execution of the service allows to reuse the area, becoming productive again

Estudo da dinâmica e destino ambiental dos fluidos usados na usinagem industrial de peças metálicas

Este estudo consistiu na investigação sobre a interação dos lubrificantes empregados na usinagem de metais com a matéria orgânica natural (substâncias húmicas), a sua mobilidade no solo, a degradação microbiológica e a remoção dos mesmos do solo. Realizou-se, também, um estudo sobre as mudanças nas características dos fluidos após a sua utilização. Para o processo de degradação das amostras de fluido, submetidos aos efeitos de diferentes fatores ambientais, foram utilizados quatro tratamentos : (i) microrganismos nativos, chamada amostra controle; (ii) amostra controle com matéria orgânica proveniente de turfa; (iii) amostra controle acrescida de microrganismos existentes nos efluentes de máquinas de corte; e (iv) amostra controle com adição de microrganismos de compostagem. Para a pesquisa da degradação sem o efeito dos parâmetros climáticos, foram utilizadas amostras de solo contaminadas mantendo-se em estufa, e a inoculação dos microrganismos em meios de cultura com e sem acréscimo de fonte alternativa de carbono. Como técnicas analíticas, foram utilizadas a CG-DIC e a CG-EM. Essas técnicas são indicadas tanto para estudar a composição dos fluidos quanto dos produtos de degradação microbiológica, tendo sido otimizados métodos analíticos para serem empregados no monitoramento ambiental e de estudos de degradação. As análises por IVTF e por EF também foram empregadas na identificação e quantificação dos fluidos. Observou-se uma considerável interação dos fluidos solúveis com a matéria orgânica do solo, embora tenham se apresentado com alta mobilidade para alguns constituintes, bem como um acelerado processo de degradação durante o uso. De outro modo, os fluidos insolúveis se apresentaram mais imóveis, ficando retidos na matéria orgânica do solo, entretanto, foram mais prontamente degradados no ambiente que os solúveis. A adição de matéria orgânica e de microrganismos de compostagem acelerou o processo de degradação para todos os fluidos de corte investigados.

Aplicação de tratamentos eletroquímicos integrados para remediação de solos e águas contaminadas com petróleo e pesticidas

Electrochemical technologies have been proposed as a promising alternative for the treatment of effluents and contaminated soils. Therefore, the objective of this work was to study the treatment of contaminated soils and wastewaters using electrochemical technologies. Thus, the study regarding the scale-up of the electrochemical system with continuous flow treatment of wastewater of the petrochemical industry was investigated using platinum electrodes supported on titanium (Ti / Pt), and boron-doped diamond (BDD). The results clearly showed that under the operating conditions studied and electrocatalytic materials employed, the better removal efficiency was achieved with BDD electrode reducing the chemical oxygen demand (COD) from 2746 mg L-1 to 200 mg L-1 in 5 h consuming 56.2 kWh m-3 . The decontamination of soils and effluents by petrochemical products was evaluated by studying the effects of electrokinetic remediation for removal of total petroleum hydrocarbons (HTP) from contaminated soil with diesel. The efficiency of this process was dependent on the electrolyte used Na2SO4 (96.46%), citric acid (81.36%) and NaOH (68.03%) for 15 days. Furthermore, the effluent after treatment of the soil was treated by electrochemical oxidation, achieving a good elimination of the organic polluting load dissolved. Depending on the physical behavior of wastewater contaminated with oil (emulsified state); atrazine emulsified effluents were investigated. The main characteristics of the effluent produced during the washing of contaminated soil were studied, being dependent on the surfactant dosage used; which determined its electrolytic treatment with BDD. The electrochemical oxidation of emulsified effluent of atrazine was efficient, but the key to the treatment is reducing the size of micelles.

Remediation of sandy soils contaminated with hydrocarbons and halogenated hydrocarbons by soil vapour extraction

This paper presents the study of the remediation of sandy soils containing six of the most common contaminants (benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene) using soil vapour extraction (SVE). The influence of soil water content on the process efficiency was evaluated considering the soil type and the contaminant. For artificially contaminated soils with negligible clay contents and natural organic matter it was concluded that: (i) all the remediation processes presented efficiencies above 92%; (ii) an increase of the soil water content led to a more time-consuming remediation; (iii) longer remediation periods were observed for contaminants with lower vapour pressures and lower water solubilities due to mass transfer limitations. Based on these results an easy and relatively fast procedure was developed for the prediction of the remediation times of real soils; 83% of the remediation times were predicted with relative deviations below 14%.

Field trials to assess the uptake of arsenic by vegetables from contaminated soils and soil remediation with iron oxides

The uptake of arsenic (As) by plants from contaminated soils presents a health hazard that may affect the use of agricultural and former industrial land. Methods for limiting the hazard are desirable. A proposed remediation treatment comprises the precipitation of iron (Fe) oxides in the contaminated soil by adding ferrous sulfate and lime. The effects on As bioavailability were assessed using a range of vegetable crops grown in the field. Four UK locations were used, where soil was contaminated by As from different sources. At the most contaminated site, a clay loam containing a mean of 748 mg As kg(-1) soil, beetroot, calabrese, cauliflower, lettuce, potato, radish and spinach were grown. For all crops except spinach, ferrous sulfate treatment caused a significant reduction in the bioavailability of As in some part of the crop. Application of ferrous sulfate in solution, providing 0.2% Fe oxides in the soil (0-10 cm), reduced As uptake by a mean of 22%. Solid ferrous sulfate was applied to give concentrations of 0.5% and 1% Fe oxides: the 0.5% concentration reduced As uptake by a mean of 32% and the 1% concentration gave no significant additional benefit. On a sandy loam containing 65 mg As kg(-1) soil, there was tentative evidence that ferrous sulfate treatment up to 2% Fe oxides caused a significant reduction in lettuce As, but calabrese did not respond. At the other two sites, the effects of ferrous sulfate treatment were not significant, but the uptake of soil As was low in treated and untreated soils. Differences between sites in the bioavailable fraction of soil As may be related to the soil texture or the source of As. The highest bioavailability was found on the soil which had been contaminated by aerial deposition and had a high sand content. (C) 2003 Elsevier Science B.V. All rights reserved.

Field trials to assess the uptake of arsenic by vegetables from contaminated soils and soil remediation with iron oxides

The uptake of arsenic (As) by plants from contaminated soils presents a health hazard that may affect the use of agricultural and former industrial land. Methods for limiting the hazard are desirable. A proposed remediation treatment comprises the precipitation of iron (Fe) oxides in the contaminated soil by adding ferrous sulfate and lime. The effects on As bioavailability were assessed using a range of vegetable crops grown in the field. Four UK locations were used, where soil was contaminated by As from different sources. At the most contaminated site, a clay loam containing a mean of 748 mg As kg(-1) soil, beetroot, calabrese, cauliflower, lettuce, potato, radish and spinach were grown. For all crops except spinach, ferrous sulfate treatment caused a significant reduction in the bioavailability of As in some part of the crop. Application of ferrous sulfate in solution, providing 0.2% Fe oxides in the soil (0-10 cm), reduced As uptake by a mean of 22%. Solid ferrous sulfate was applied to give concentrations of 0.5% and 1% Fe oxides: the 0.5% concentration reduced As uptake by a mean of 32% and the 1% concentration gave no significant additional benefit. On a sandy loam containing 65 mg As kg(-1) soil, there was tentative evidence that ferrous sulfate treatment up to 2% Fe oxides caused a significant reduction in lettuce As, but calabrese did not respond. At the other two sites, the effects of ferrous sulfate treatment were not significant, but the uptake of soil As was low in treated and untreated soils. Differences between sites in the bioavailable fraction of soil As may be related to the soil texture or the source of As. The highest bioavailability was found on the soil which had been contaminated by aerial deposition and had a high sand content. (C) 2003 Elsevier Science B.V. All rights reserved.

Histological and Histochemical Analysis of the Fat Body of Rhinocricus padbergi (Diplopoda) Exposed to Contaminated Industrial Soil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Zinc and lead content and availability in Brazilian soil contaminated with residue of a secondary smelting lead recycling plant

The sequential extraction procedure of Zinc and lead performed in a Brazilian soil showed that it presents high pollution potential once over 90% of total lead is present in fractions where the metals can be easily mobilized. The fraction contents are as follow: F1 = 174 and 15 mg kg-1; F2 = 3155 and 9.7 mg kg -1; F3 = 99 and 1.6 mg kg -1; Residual fraction = 38 and 5.5 mg kg -1 for lead and zinc, respectively. The comparison with non contaminated soil only Pb 2+ concentration is above its intervention reference concentration, 900 mg kg -1.

Mobility and toxicity of heavy metal(loid)s arising from contaminated wood ash application to a pasture grassland soil

The authors acknowledge the financial support the Scottish Government’s Rural and Environmental Sciences and Analytical Services (RESAS) in order to complete some of the soil and pore water sample analysis as well as the Czech Ministry of Education, Youth and Sports (COST CZ LD13068), the Czech Science Foundation (GAČR 14-02183P) and EU COST actionFP1407 (‘ModWoodLife’) short term scientific mission grant in order to complete the column leaching test.