Novel Prostate Specific Antigen plastic antibody designed withcharged binding sites for an improved protein binding and itsapplication in a biosensor of potentiometric transduction

This work shows that the synthesis of protein plastic antibodies tailored with selected charged monomersaround the binding site enhances protein binding. These charged receptor sites are placed over a neutralpolymeric matrix, thus inducing a suitable orientation the protein reception to its site. This is confirmed bypreparing control materials with neutral monomers and also with non-imprinted template. This concepthas been applied here to Prostate Specific Antigen (PSA), the protein of choice for screening prostate can-cer throughout the population, with serum levels >10 ng/mL pointing out a high probability of associatedcancer.Protein Imprinted Materials with charged binding sites (C/PIM) have been produced by surfaceimprinting over graphene layers to which the protein was first covalently attached. Vinylben-zyl(trimethylammonium chloride) and vinyl benzoate were introduced as charged monomers labellingthe binding site and were allowed to self-organize around the protein. The subsequent polymerizationwas made by radical polymerization of vinylbenzene. Neutral PIM (N/PIM) prepared without orientedcharges and non imprinted materials (NIM) obtained without template were used as controls.These materials were used to develop simple and inexpensive potentiometric sensor for PSA. Theywere included as ionophores in plasticized PVC membranes, and tested over electrodes of solid or liq-uid conductive contacts, made of conductive carbon over a syringe or of inner reference solution overmicropipette tips. The electrodes with charged monomers showed a more stable and sensitive response,with an average slope of -44.2 mV/decade and a detection limit of 5.8 × 10−11mol/L (2 ng/mL). The cor-responding non-imprinted sensors showed lower sensitivity, with average slopes of -24.8 mV/decade.The best sensors were successfully applied to the analysis of serum, with recoveries ranging from 96.9to 106.1% and relative errors of 6.8%.

Haemoglobin smart plastic antibody material tailored with charged binding sites on silica nanoparticles: its application as an ionophore in potentiometric transduction

This work uses surface imprinting to design a novel smart plastic antibodymaterial (SPAM) for Haemoglobin (Hb). Charged binding sites are described here for the first time to tailor plastic antibody nanostructures for a large size protein such as Hb. Its application to design small, portable and low cost potentiometric devices is presented. The SPAM material was obtained by linking Hb to silica nanoparticles and allowing its ionic interaction with charged vinyl monomers. A neutral polymeric matrix was created around these and the imprinted protein removed. Additional materials were designed in parallel acting as a control: a neutral imprinted material (NSPAM), obtained by removing the charged monomers from the procedure, and the Non-Imprinted (NI) versions of SPAM and NSPAM by removing the template. SEM analysis confirmed the surface modification of the silica nanoparticles. All materials were mixed with PVC/plasticizer and applied as selective membranes in potentiometric transduction. Electromotive force (emf) variations were detected only for selective membranes having a lipophilic anionic additive in the membrane. The presence of Hb inside these membranes was evident and confirmed by FTIR, optical microscopy and Raman spectroscopy. The best performance was found for SPAM-based selective membranes with an anionic lipophilic additive, at pH 5. The limits of detection were 43.8 mg mL 1 and linear responses were obtained down to 83.8 mg mL 1, with an average cationic slope of +40 mV per decade. Good selectivity was also observed against other coexisting biomolecules. The analytical application was conducted successfully, showing accurate and precise results.

Smart Plastic Antibody Material for Hemoglobin Tailored by Silica Surface Imprinting and with Charged Binding Sites: Its use as Ionophore in Potentiometric Transduction

JORNADAS DE ELECTROQUÍMICA E INOVAÇÃO 2013

Fungal agents in different anatomical sites in Public Health Services in Cuiabá, state of Mato Grosso, Brazil

INTRODUCTION: A contribution to the regional epidemiological profile of the most common fungal agents in Public Health Services in Cuiabá, state of Mato Grosso, including university hospitals and polyclinics. METHODS: Clinical specimens (n = 1,496) from 1,078 patients were collected, submitted to direct mycological exam (potash or stick tape method) and cultured in specific mediums. Dermatophytic and non-dermatophytic agents were identified according to micromorphology (Ridell technique). RESULTS: The majority of the 1,496 specimens were skin (n = 985) and nail exams (n = 472). Of the 800 positive cultures, 246 (30.8%) corresponded to dermatophytes and 336 (42%) to yeasts of the genus Candida, 190 (23.7%) to other yeasts, 27 (3.4%) to non-dermatophytic filamentous fungi and one (0.1%) the agent of subcutaneous mycosis. Lesions considered primary occurred in greater numbers (59.5%) than recurrent lesions (37.4%), with a greater concentration of positivity occurring on the arms and legs. CONCLUSIONS: Comorbidities, allergies and diabetes mellitus were conditions associated with greater positivity in direct mycological exams and cultures. Positive culture was considered a definitive diagnosis of fungal infection and confirmed 47.8% of diagnostic hypotheses.

Contamination of public parks and squares from Guarulhos (São Paulo State, Brazil ) by Toxocara spp. and Ancylostoma spp.

The contaminated soil with mammal feces is an important factor of risk to infection with zoonotic diseases. Amongst these zoonoses are visceral larva migrans and cutaneous larva migrans caused by Toxocara spp. and Ancylostoma spp., respectively. The aim of this study was to assess the environmental contamination by Toxocara spp. eggs and hookworms (Ancylostoma spp.) in public parks and squares in the city of Guarulhos, a metropolitan area of São Paulo, São Paulo State, Brazil. Soil samples were collected, between September and December 2010, and examined using the centrifugal flotation technique with sodium dichromate and zinc sulphate as well as the modified Baermann method. Notably, 35 (74.5%) of the 47 districts surveyed in Guarulhos possessed samples contaminated with Toxocara spp. and/or eggs or larvae of Ancylostoma spp. The frequency of Toxocara spp. and Ancylostoma spp. in the samples from public areas was 68.1% and 46.8%, respectively. Overall, the eastern side of Guarulhos is the region with the highest occurrence of causative agents of larva migrans. In all collection sites, the presence of feces from dogs and cats accompanied by their owners and stray animals were observed. Notably, it is important to adopt measures to control dog and cat breeding, to treat infected animals, and provide health education to the population.

Breeding of Biomphalaria tenagophila in mass scale

An efficient method for breeding Biomphalaria tenagophila (Taim lineage/RS) was developed over a 5-year-period (2005-2010). Special facilities were provided which consisted of four cement tanks (9.4 x 0.6 x 0.22 m), with their bottom covered with a layer of sterilized red earth and calcium carbonate. Standard measures were adopted, as follows: each tank should contain an average of 3000 specimens, and would be provided with a daily ration of 35,000 mg complemented with lettuce. A green-house effect heating system was developed which constituted of movable dark canvas covers, which allowed the temperature to be controlled between 20 - 24 ºC. This system was essential, especially during the coldest months of the year. Approximately 27,000 specimens with a diameter of 12 mm or more were produced during a 14-month-period. The mortality rates of the newly-hatched and adult snails were 77% and 37%, respectively. The follow-up of the development system related to 310 specimens of B. tenagophila demonstrated that 70-day-old snails reached an average of 17.0 ± 0.9 mm diameter. The mortality rates and the development performance of B. tenagophila snails can be considered as highly satisfactory, when compared with other results in literature related to works carried out with different species of the genus Biomphalaria, under controlled laboratory conditions.

Spatial point pattern analysis of gorilla nest sites in the Kagwene Sanctuary, Cameroon: Towards understanding the nesting behavior of a critically endangered subspecies

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Long-term behaviour of railway transitions under dynamic loading application to soft soil sites

Dissertação para obtenção do Grau de Doutor em Engenharia Civil

O uso do video nos sites dos jornais impressos

DISSERTAÇÃO APRESENTADA PARA CUMPRIMENTO DOS REQUISITOS NECESSÁRIOS À OBTENÇÃO DO GRAU DE MESTRE EM (CIÊNCIAS DA COMUNICAÇÃO, VERTENTE DE CINEMA E TELEVISÃO),

Predisposition assessment modelling

Dissertation submitted for obtaining the degree of Master in Environmental Engineering

Environment, health and safety policy in small construction sites: an analysis of the situation in Brazil

This paper analyzes the safety, environmental and occupational health of workers in the small construction industry in Brazil. In this sector there are still many unsafe practices, which are very common in small work sites. We used a qualitative approach to understand these problems by long interviews with people who work directly in small construction sites, including occupational physicians, civil engineers, safety engineers, safety technicians, general foremen, construction workers, labor unionists and auditors. This paper aims to demonstrate that the "invisibility" of the small sites workers makes them less safe and therefore more prone to accidents, also weakening their health. The results show that small constructions workers are less visible to society and supervision because of their short periods of work. Therefore, they are also uncovered to the rigorous applicability of principles of safety and accident prevention. Thus, it has been seen in this field of work a precarious application of NR - 18, which was specifically made for the construction sites and it needs simplification to meet normative characteristics of small construction sites. In the State of Rio de Janeiro, some laws on small sites were recently created and implemented. This study concludes that the rules to work are not being taken as seriously as the legislation determinates, remaining practically unknown by many professionals, from the plot command, supervisors, engineers, architects and technicians who work on construction sites. This ignorance creates space for the lack of safety and consequently to accidents, leading to by weakness in the workers health. Therefore, the work process needs to be modified, the safety regulation must be disseminated through safer practices, promoting employee health and ensure that the work of small sites can be visible, especially ensuring the construction workers health and safety.

Genetic breeding on the bee Melipona scutellaris (Apidae, Meliponinae)

A selection of queens of Melipona scutellaris through the most productive colonies were carried out during eight months in an orange honeyflow. Each of the colonies was evaluated by its production, that is, the gross weight production ( pollen, brood, geopropolis and wax of each hive). With this data a coefficient of repeatability was estimated by the intraclass correlation method, obtained r = 0.835 ± 0.071. The repeatibility is very high showing that the analysed data (production) is repeatable. Selection was then carried out using the regression coefficient of each colony and the respective production gain. Using these data the colonies were divided into three groups according to the method Vencovsky and Kerr (1982): a with the colonies of highest productivity, b of least productivity, and c of intermediary productivity. Colonies with the highest production (Group a) gave their queens to those of the lowest production (Group b) after their queens were taken out and killed; while those of intermediate (Group c) stayed with the same queens during the entire experiment both before and after the selection. The modifications in weight, that is, the genetic response was (R)= 7.98 gr per day which indicated a selection gain. The estimate of the realized herdability is twice the rate of the response to selection (R) by the selection differential (S2). That is then h²R=2(R/S2) then h²R= 0.166

Fine-root production in two secondary forest sites with distinct ages in Eastern Amazon

The objective of this work was to assess the fine-root (≤ 2 mm diameter) production dynamics of two forest regrowths at different ages. Fine-root production was monitored by the ingrowth core method in one 18-year-old site (2 ha) and one 10-year-old site (0.5 ha), both localized in the Apeú region, Northern Pará State, Brazil. The sites were abandoned after successive shifting cultivation, beginning in 1940. Monthly production of live fine-root was similar between sites and was influenced by rainfall seasonality, with higher production during the dry season than the wet season for mass and length. However, mortality in terms of mass was higher in the 10-year-old site than in the 18-year-old site. The seasonality influenced mortality only in the 18-year old site following the pattern observed for live fine-root. The influence seasonal on mortality in terms of length was different between sites, with higher mortality during the wet season in the 10-year-old site and higher mortality during the dry season in the 18-year-old site. Specific root length was higher during the wet season and at the 10-year-old site. Fine-root production was not influenced by the chronosequence of the sites studied, probably fine-root production may have already stabilized in the sites or it depended more on climate and soil conditions. The production of fine-roots mass and length were indicators that generally showed the same pattern.

Characteristics and identification of sites of chagasic ventricular tachycardia by endocardial mapping

OBJECTIVE: To study electrophysiological characteristics that enable the identification and ablation of sites of chagasic tachycardia. METHODS: Thirty-one patients with chronic Chagas' heart disease and sustained ventricular tachycardia (SVT) underwent electrophysiological study to map and ablate that arrhythmia. Fifteen patients had hemodinamically stable SVT reproducible by programmed ventricular stimulation, 9 men and 6 women with ages ranging from 37 to 67 years and ejection fraction varying from 0.17 to 0.64. Endocardial mapping was performed during SVT in all patients. Radiofrequency (RF) current was applied to sites of presystolic activity of at least 30 ms. Entrainment was used to identify reentrant circuits. In both successful and unsuccessful sites of RF current application, electrogram and entrainment were analyzed. RESULTS: Entrainment was obtained during all mapped SVT. In 70.5% of the sites we observed concealed entrainment and ventricular tachycardia termination in the first 15 seconds of RF current application. In the unsuccessful sites, significantly earlier electrical activity was seen than in the successful ones. Concealed entrainment was significantly associated with ventricular tachycardia termination. Bystander areas were not observed. CONCLUSION: The reentrant mechanism was responsible for the genesis of all tachycardias. In 70.5% of the studied sites, the endocardial participation of the slow conducting zone of reentrant circuits was shown. Concealed entrainment was the main electrophysiological parameter associated with successful RF current application. There was no electrophysiological evidence of bystander regions in the mapped circuits of SVT.

Safety management of cranes on construction sites in Portugal: Critical factors of safety

The evolution of the construction caused a need to use more effective equipments, capable of meeting the increasingly demanding deadlines for the completion of works. In this context, the safety and efficiency of equipment have become key aspects in order to optimize the execution time of the works, as well as reducing labor costs and loss of materials. With the evolution of construction and construction processes, cranes have come to represent a signal of the construction of buildings, revealing to be, in most of the cases, the main equipment of construction sites. Currently, some engineers revels some apprehension regarding the use and handling of cranes which is natural and acceptable, since an equipment failure can lead to serious or fatal accidents. The factors affecting safety management of the cranes in construction sites were investigated, identified, classified and evaluated according to their degree of importance, through interviews with representatives of the general contractors of a set of selected construction sites.