Sistema encastat de monitorització d'informació múltiple: implementació per a vehicles

Aquest projecte es centra en l’àmbit de l’automoció, i la seva finalitat es ampliar la informació que proporciona el fabricant d’un vehicle als usuaris. Un dels punts claus del sistema es que aquest quedi completament integrat, per tant, utilitza dispositius externs inclosos al vehicle com ara el display que anteriorment s’utilitzava per a mostrar informació del radiocasset, i una maneta amb dos botons utilitzada per al control del sistema. El sistema mostra diferents tipus d’informació com ara la velocitat instantània del vehicle, revolucions del motor, velocitat màxima, distància parcial recorreguda, hora i data. A més de mostrar informació, aquest es capaç d’emmagatzemar-la en un suport extraïble per a una posterior explotació a un ordinador convencional. El sistema no està pensat per a ser un projecte tancat, sinó que esta dissenyat per a ser ampliat en quant a funcionalitats, i per tant aquest projecte es considera una primera versió.

A new method for geoelectrical investigations underwater

A new electrical method is proposed for determining the apparent resistivity of multi-earth layers located underwater. The method is based on direct current geoelectric sounding principles. A layered earth model is used to simulate the stratigraphic target. The measurement array is of pole-pole type; it is located underwater and is orientated vertically. This particular electrode configuration is very useful when conventional electrical methods cannot be used, especially if the water depth becomes very important. The calculated apparent resistivity shows a substantial quality increase in the measured signal caused by the underwater targets, from which little or no response is measured using conventional surface electrode methods. In practice, however, different factors such as water stratification, underwater streams or meteorological conditions complicate the interpretation of the field results. A case study is presented, where field surveys carried out on Lake Geneva were interpreted using the calculated apparent resistivity master-curves.

Organometallic cages as vehicles for intracellular release of photosensitizers.

Water-soluble metalla-cages were used to deliver hydrophobic porphin molecules to cancer cells. After internalization, the photosensitizer was photoactivated, significantly increasing the cytotoxicity in cells. During the transport, the photosensitizer remains nonreactive to light, offering a new strategy to tackle overall photosensitization, a limitation often encountered in photodynamic therapy.

Passes fins a futurs canvis legislatius a l’àmbit penal en material de conducció de vehicles. Estudi quantitatiu de cocaïna i heroïna en saliva de conductors

Estudi de la presència de cocaïna i opiacis en saliva, en subjectes sospitosos de conduir sota els efectes de les drogues. Aplicació d’un test d’immunoassaig (Cozart). Confirmació i quantificació dels resultats positius (CG-EM). Comparació amb alteracions clíniques en els subjectes. No hi ha diferències entre concentracions de droga i signes clínics avaluades

Treball Final de Carrera .NET : plataforma per a la gestió d'un servei de lloguer de vehicles

Plataforma per a la gestió d'un servei de lloguer de vehicles desenvolupat en tecnologia .Net de Microsoft.Consta d'una plana web enfocada als clients, una aplicació d'administració i d'una aplicació mòbil per a la gestió per part del personal de taller.

Towards Detecting Changes in Underwater Image Sequences

Detecting changes between images of the same scene taken at different times is of great interest for monitoring and understanding the environment. It is widely used for on-land application but suffers from different constraints. Unfortunately, Change detection algorithms require highly accurate geometric and photometric registration. This requirement has precluded their use in underwater imagery in the past. In this paper, the change detection techniques available nowadays for on-land application were analyzed and a method to automatically detect the changes in sequences of underwater images is proposed. Target application scenarios are habitat restoration sites, or area monitoring after sudden impacts from hurricanes or ship groundings. The method is based on the creation of a 3D terrain model from one image sequence over an area of interest. This model allows for synthesizing textured views that correspond to the same viewpoints of a second image sequence. The generated views are photometrically matched and corrected against the corresponding frames from the second sequence. Standard change detection techniques are then applied to find areas of difference. Additionally, the paper shows that it is possible to detect false positives, resulting from non-rigid objects, by applying the same change detection method to the first sequence exclusively. The developed method was able to correctly find the changes between two challenging sequences of images from a coral reef taken one year apart and acquired with two different cameras

Towards Direct Policy Search Reinforcement Learning for Robot Control

This paper proposes a high-level reinforcement learning (RL) control system for solving the action selection problem of an autonomous robot. Although the dominant approach, when using RL, has been to apply value function based algorithms, the system here detailed is characterized by the use of direct policy search methods. Rather than approximating a value function, these methodologies approximate a policy using an independent function approximator with its own parameters, trying to maximize the future expected reward. The policy based algorithm presented in this paper is used for learning the internal state/action mapping of a behavior. In this preliminary work, we demonstrate its feasibility with simulated experiments using the underwater robot GARBI in a target reaching task

Detection of matchings in a sequence of underwater images through texture analysis

This paper presents an approach to ameliorate the reliability of the correspondence points relating two consecutive images of a sequence. The images are especially difficult to handle, since they have been acquired by a camera looking at the sea floor while carried by an underwater robot. Underwater images are usually difficult to process due to light absorption, changing image radiance and lack of well-defined features. A new approach based on gray-level region matching and selective texture analysis significantly improves the matching reliability

Proposal of a parallel architecture for a motion detection algorithm

This paper proposes a parallel architecture for estimation of the motion of an underwater robot. It is well known that image processing requires a huge amount of computation, mainly at low-level processing where the algorithms are dealing with a great number of data. In a motion estimation algorithm, correspondences between two images have to be solved at the low level. In the underwater imaging, normalised correlation can be a solution in the presence of non-uniform illumination. Due to its regular processing scheme, parallel implementation of the correspondence problem can be an adequate approach to reduce the computation time. Taking into consideration the complexity of the normalised correlation criteria, a new approach using parallel organisation of every processor from the architecture is proposed

Behaviours implemented using a vision system based on coded light projection

In a search for new sensor systems and new methods for underwater vehicle positioning based on visual observation, this paper presents a computer vision system based on coded light projection. 3D information is taken from an underwater scene. This information is used to test obstacle avoidance behaviour. In addition, the main ideas for achieving stabilisation of the vehicle in front of an object are presented

An overview of the advantages and constraints of coded pattern projection techniques for autonomous navigation

The absolute necessity of obtaining 3D information of structured and unknown environments in autonomous navigation reduce considerably the set of sensors that can be used. The necessity to know, at each time, the position of the mobile robot with respect to the scene is indispensable. Furthermore, this information must be obtained in the least computing time. Stereo vision is an attractive and widely used method, but, it is rather limited to make fast 3D surface maps, due to the correspondence problem. The spatial and temporal correspondence among images can be alleviated using a method based on structured light. This relationship can be directly found codifying the projected light; then each imaged region of the projected pattern carries the needed information to solve the correspondence problem. We present the most significant techniques, used in recent years, concerning the coded structured light method

Aplicació de la tècnica d’ espectroscòpia d’ absorció atòmica de flama com a eina per al manteniment de vehicles

L’objectiu d’aquest projecte fi de carrera és en primer lloc, determinar les modificacions a realitzar en el laboratori de lubricants i combustibles de l’EPS per a la utilització de l’espectrofotòmetre d’absorció atòmica de flama; en segon lloc, posar a punt l’aparell establint els paràmetres i les condicions d’assaig idònies per a portar a terme les anàlisis de metalls de desgast presents en olis lubricants usats de motors de combustió interna. I finalment, establir un protocol de treball al laboratori i estudiar la viabilitat d’oferir el servei d’anàlisi de lubricants a empreses i particulars

Servei de retirada de vehicles de la via pública del terme municipal de València basat en localització GPS i comunicacions GPRS

L’objectiu d’aquest projecte és dotar a Servicleop d’un programari que li permeti millorar la gestió dels serveis de retirada de vehicles de la via pública, que actualment s’efectua a través del canal de veu. Això s’aconseguirà mitjançant l’ús de cartografia digital i localització GPS, que permetrà optimitzar l’assignació de retirades al saber quina grua es troba en millor disposició, i PDAs que es comunicaran amb un centre de control a través de GPRS des del qual s’assignaran aquest serveis. S’oferiran facilitats sempre que sigui possible en la introducció de dades, disminuint les probabilitats de cometre errors, i tot el procés quedarà enregistrat automàticament en base de dades per a poder generar estadístiques o informes. el projecte parteix d’un altre projecte intern de Knosos anomenat Micronav.Net Serveis, en el qual també he treballat molt activament i que ofereix una solució genèrica similar a la requerida per Servicleop, empresa a la que va destinada el sistema que es presenta en aquest projecte final de carrera

Estudi de l’eficiència aerodinàmica de vehicles pesants de transport de passatgers

Estudi de l’eficiència aerodinàmica de les carrosseries de vehicles pesants de cara a reduir el consum de combustible en autocars de llarg trajecte. L’estudi es basa en tres aspectes: validació del programa de simulació, estudi aerodinàmic de diferents carrosseries d’autocar de mercat i estudi aerodinàmic de diferents complements