Database of diazotrophs in global ocean: abundances, biomass and nitrogen fixation rates

[EN] Marine N2 fixing microorganisms, termed diazotrophs, are a key functional group in marine pelagic ecosystems. The biological fixation of dinitrogen (N2) to bioavailable nitrogen provides an important new source of nitrogen for pelagic marine ecosystems 5 and influences primary productivity and organic matter export to the deep ocean. As one of a series of efforts to collect biomass and rates specific to different phytoplankton functional groups, we have constructed a database on diazotrophic organisms in the global pelagic upper ocean by compiling about 12 000 direct field measurements of cyanobacterial diazotroph abundances (based on microscopic cell counts or qPCR 10 assays targeting the nifH genes) and N2 fixation rates. Biomass conversion factors are estimated based on cell sizes to convert  abundance data to diazotrophic biomass. The database is limited spatially, lacking large regions of the ocean especially in the Indian Ocean. The data are approximately log-normal distributed, and large variances exist in most sub-databases with non-zero values differing 5 to 8 orders of magnitude. 15 Lower mean N2 fixation rate was found in the North Atlantic Ocean than the Pacific Ocean. Reporting the geometric mean and the range of one geometric standard error below and above the geometric mean, the pelagic N2 fixation rate in the global ocean is estimated to be 62 (53–73) TgNyr−1 and the pelagic diazotrophic biomass in the global ocean is estimated to be 4.7 (2.3–9.6) TgC from cell counts and to 89 (40–20 200) TgC from nifH-based abundances. Uncertainties related to biomass conversion factors can change the estimate of geometric mean pelagic diazotrophic biomass in the global ocean by about ±70 %. This evolving database can be used to study spatial and temporal distributions and variations of marine N2 fixation, to validate geochemical estimates and to parameterize and validate biogeochemical models. The database is 25 stored in PANGAEA (http://doi.pangaea.de/10.1594/PANGAEA.774851).

Role of reactive oxygen and nitrogen species in the response of Prunus spp. to bicarbonate

In calcareous soils, which are a large share of agricultural soils worldwide, iron availability is limited. Consequently, the whole plant physiology is affected, because of the key role of iron in redox metabolism, resulting in reduced crop yield and quality. Peach cultivation is economically important in northern Italy, and is easily subjected to iron chlorosis. The management of iron nutrition in peach includes grafting on bicarbonate-tolerant rootstocks; other forms of management may be expensive and environmentally impacting. Four genotypes, used as rootstocks for peach and characterized by different degrees of tolerance to chlorosis, were tested in vitro on optimal and bicarbonate-enriched medium. Their redox status and antioxidant responses were assayed; the production and possible roles of nitric oxide (NO) and related compounds were also studied. The most sensitive genotypes show a stronger reduction of the antioxidant enzymatic activities and an increased oxidative stress. A high production of NO was found to be associated to resistant genotypes, whereas sensitive genotypes reacted to stress by downregulating nitrosoglutathione reductase activity. Therefore, NO is proposed to improve the internal iron availability, or to stimulate iron intake.

Biomass Gasification - Process analysis and dimensioning aspects for downdraft units and gas cleaning lines

In such territories where food production is mostly scattered in several small / medium size or even domestic farms, a lot of heterogeneous residues are produced yearly, since farmers usually carry out different activities in their properties. The amount and composition of farm residues, therefore, widely change during year, according to the single production process periodically achieved. Coupling high efficiency micro-cogeneration energy units with easy handling biomass conversion equipments, suitable to treat different materials, would provide many important advantages to the farmers and to the community as well, so that the increase in feedstock flexibility of gasification units is nowadays seen as a further paramount step towards their wide spreading in rural areas and as a real necessity for their utilization at small scale. Two main research topics were thought to be of main concern at this purpose, and they were therefore discussed in this work: the investigation of fuels properties impact on gasification process development and the technical feasibility of small scale gasification units integration with cogeneration systems. According to these two main aspects, the present work was thus divided in two main parts. The first one is focused on the biomass gasification process, that was investigated in its theoretical aspects and then analytically modelled in order to simulate thermo-chemical conversion of different biomass fuels, such as wood (park waste wood and softwood), wheat straw, sewage sludge and refuse derived fuels. The main idea is to correlate the results of reactor design procedures with the physical properties of biomasses and the corresponding working conditions of gasifiers (temperature profile, above all), in order to point out the main differences which prevent the use of the same conversion unit for different materials. At this scope, a gasification kinetic free model was initially developed in Excel sheets, considering different values of air to biomass ratio and the downdraft gasification technology as particular examined application. The differences in syngas production and working conditions (process temperatures, above all) among the considered fuels were tried to be connected to some biomass properties, such elementary composition, ash and water contents. The novelty of this analytical approach was the use of kinetic constants ratio in order to determine oxygen distribution among the different oxidation reactions (regarding volatile matter only) while equilibrium of water gas shift reaction was considered in gasification zone, by which the energy and mass balances involved in the process algorithm were linked together, as well. Moreover, the main advantage of this analytical tool is the easiness by which the input data corresponding to the particular biomass materials can be inserted into the model, so that a rapid evaluation on their own thermo-chemical conversion properties is possible to be obtained, mainly based on their chemical composition A good conformity of the model results with the other literature and experimental data was detected for almost all the considered materials (except for refuse derived fuels, because of their unfitting chemical composition with the model assumptions). Successively, a dimensioning procedure for open core downdraft gasifiers was set up, by the analysis on the fundamental thermo-physical and thermo-chemical mechanisms which are supposed to regulate the main solid conversion steps involved in the gasification process. Gasification units were schematically subdivided in four reaction zones, respectively corresponding to biomass heating, solids drying, pyrolysis and char gasification processes, and the time required for the full development of each of these steps was correlated to the kinetics rates (for pyrolysis and char gasification processes only) and to the heat and mass transfer phenomena from gas to solid phase. On the basis of this analysis and according to the kinetic free model results and biomass physical properties (particles size, above all) it was achieved that for all the considered materials char gasification step is kinetically limited and therefore temperature is the main working parameter controlling this step. Solids drying is mainly regulated by heat transfer from bulk gas to the inner layers of particles and the corresponding time especially depends on particle size. Biomass heating is almost totally achieved by the radiative heat transfer from the hot walls of reactor to the bed of material. For pyrolysis, instead, working temperature, particles size and the same nature of biomass (through its own pyrolysis heat) have all comparable weights on the process development, so that the corresponding time can be differently depending on one of these factors according to the particular fuel is gasified and the particular conditions are established inside the gasifier. The same analysis also led to the estimation of reaction zone volumes for each biomass fuel, so as a comparison among the dimensions of the differently fed gasification units was finally accomplished. Each biomass material showed a different volumes distribution, so that any dimensioned gasification unit does not seem to be suitable for more than one biomass species. Nevertheless, since reactors diameters were found out quite similar for all the examined materials, it could be envisaged to design a single units for all of them by adopting the largest diameter and by combining together the maximum heights of each reaction zone, as they were calculated for the different biomasses. A total height of gasifier as around 2400mm would be obtained in this case. Besides, by arranging air injecting nozzles at different levels along the reactor, gasification zone could be properly set up according to the particular material is in turn gasified. Finally, since gasification and pyrolysis times were found to considerably change according to even short temperature variations, it could be also envisaged to regulate air feeding rate for each gasified material (which process temperatures depend on), so as the available reactor volumes would be suitable for the complete development of solid conversion in each case, without even changing fluid dynamics behaviour of the unit as well as air/biomass ratio in noticeable measure. The second part of this work dealt with the gas cleaning systems to be adopted downstream the gasifiers in order to run high efficiency CHP units (i.e. internal engines and micro-turbines). Especially in the case multi–fuel gasifiers are assumed to be used, weightier gas cleaning lines need to be envisaged in order to reach the standard gas quality degree required to fuel cogeneration units. Indeed, as the more heterogeneous feed to the gasification unit, several contaminant species can simultaneously be present in the exit gas stream and, as a consequence, suitable gas cleaning systems have to be designed. In this work, an overall study on gas cleaning lines assessment is carried out. Differently from the other research efforts carried out in the same field, the main scope is to define general arrangements for gas cleaning lines suitable to remove several contaminants from the gas stream, independently on the feedstock material and the energy plant size The gas contaminant species taken into account in this analysis were: particulate, tars, sulphur (in H2S form), alkali metals, nitrogen (in NH3 form) and acid gases (in HCl form). For each of these species, alternative cleaning devices were designed according to three different plant sizes, respectively corresponding with 8Nm3/h, 125Nm3/h and 350Nm3/h gas flows. Their performances were examined on the basis of their optimal working conditions (efficiency, temperature and pressure drops, above all) and their own consumption of energy and materials. Successively, the designed units were combined together in different overall gas cleaning line arrangements, paths, by following some technical constraints which were mainly determined from the same performance analysis on the cleaning units and from the presumable synergic effects by contaminants on the right working of some of them (filters clogging, catalysts deactivation, etc.). One of the main issues to be stated in paths design accomplishment was the tars removal from the gas stream, preventing filters plugging and/or line pipes clogging At this scope, a catalytic tars cracking unit was envisaged as the only solution to be adopted, and, therefore, a catalytic material which is able to work at relatively low temperatures was chosen. Nevertheless, a rapid drop in tars cracking efficiency was also estimated for this same material, so that an high frequency of catalysts regeneration and a consequent relevant air consumption for this operation were calculated in all of the cases. Other difficulties had to be overcome in the abatement of alkali metals, which condense at temperatures lower than tars, but they also need to be removed in the first sections of gas cleaning line in order to avoid corrosion of materials. In this case a dry scrubber technology was envisaged, by using the same fine particles filter units and by choosing for them corrosion resistant materials, like ceramic ones. Besides these two solutions which seem to be unavoidable in gas cleaning line design, high temperature gas cleaning lines were not possible to be achieved for the two larger plant sizes, as well. Indeed, as the use of temperature control devices was precluded in the adopted design procedure, ammonia partial oxidation units (as the only considered methods for the abatement of ammonia at high temperature) were not suitable for the large scale units, because of the high increase of reactors temperature by the exothermic reactions involved in the process. In spite of these limitations, yet, overall arrangements for each considered plant size were finally designed, so that the possibility to clean the gas up to the required standard degree was technically demonstrated, even in the case several contaminants are simultaneously present in the gas stream. Moreover, all the possible paths defined for the different plant sizes were compared each others on the basis of some defined operational parameters, among which total pressure drops, total energy losses, number of units and secondary materials consumption. On the basis of this analysis, dry gas cleaning methods proved preferable to the ones including water scrubber technology in al of the cases, especially because of the high water consumption provided by water scrubber units in ammonia adsorption process. This result is yet connected to the possibility to use activated carbon units for ammonia removal and Nahcolite adsorber for chloride acid. The very high efficiency of this latter material is also remarkable. Finally, as an estimation of the overall energy loss pertaining the gas cleaning process, the total enthalpy losses estimated for the three plant sizes were compared with the respective gas streams energy contents, these latter obtained on the basis of low heating value of gas only. This overall study on gas cleaning systems is thus proposed as an analytical tool by which different gas cleaning line configurations can be evaluated, according to the particular practical application they are adopted for and the size of cogeneration unit they are connected to.

Phytoremediation by poplar: polyphenols polyamines and oxidative damage in the response to heavy metals in in vitro and in hydroponic cultures.

Poplar is considered a good candidate for phytoremediation, but its tolerance to heavy metals has not been fully investigated yet. In the present work, two different culture systems (in vitro and aeroponic/hydroponic) and two different stress tolerant clones of Populus alba (AL22 and Villafranca) were investigated for their total polyphenol and flavonoid content, individual phenolic compounds, polyamine, lipid peroxidation and hydrogen peroxide levels in response to Cu. In AL22 poplar plants cultured in vitro in the presence or absence of 50 μM Cu, total leaves polyphenol and flavonoid content was higher in treated samples than in controls but unaltered in the roots. Equally the same clone, grown under aeroponic conditions and hydroponically treated for 72 h with 100 μM Cu, displayed increased amount of polyphenols and flavonoids in the leaves, in particular chlorogenic acid and quercetin, and no differences in the roots. In exudates from treated roots total polyphenols and flavonoids, in particular catechin and epicatechin, were more abundant than in controls. Polyamine levels show an increase in conjugated putrescine (Put) and spermidine (Spd) was found. In the Villafranca clone, treated with 100 μM Cu for 6, 24 and 72 h, the pattern of polyphenol and flavonoid accumulation was the same as in AL22; in Cu-treated roots these compounds decreased compared with controls while they increased in root exudates. Free polyamine levels rose at 24 and 72 h while only conjugated Put increased at 24 h. Cu-treated Villafranca plants exhibited a higher malondialdehyde production than controls indicative of membrane lipid peroxidation and, therefore, oxidative stress. An in vitro experiment was carried to investigate the antioxidant effect of the polyamine spermidine (Spd). Exogenous Spd, supplied together with 100 μM Cu, reduced the accumulation of polyphenols and flavonoids, MDA and hydrogen peroxide induced by Cu.

Genetic basis of variation for root traits and response to heat stress in durum wheat

Durum wheat is the second most important wheat species worldwide and the most important crop in several Mediterranean countries including Italy. Durum wheat is primarily grown under rainfed conditions where episodes of drought and heat stress are major factors limiting grain yield. The research presented in this thesis aimed at the identification of traits and genes that underlie root system architecture (RSA) and tolerance to heat stress in durum wheat, in order to eventually contribute to the genetic improvement of this species. In the first two experiments we aimed at the identification of QTLs for root trait architecture at the seedling level by studying a bi-parental population of 176 recombinant inbred lines (from the cross Meridiano x Claudio) and a collection of 183 durum elite accessions. Forty-eight novel QTLs for RSA traits were identified in each of the two experiments, by means of linkage- and association mapping-based QTL analysis, respectively. Important QTLs controlling the angle of root growth in the seedling were identified. In a third experiment, we investigated the phenotypic variation of root anatomical traits by means of microscope-based analysis of root cross sections in 10 elite durum cultivars. The results showed the presence of sizeable genetic variation in aerenchyma-related traits, prompting for additional studies aimed at mapping the QTLs governing such variation and to test the role of aerenchyma in the adaptive response to abiotic stresses. In the fourth experiment, an association mapping experiment for cell membrane stability at the seedling stage (as a proxy trait for heat tolerance) was carried out by means of association mapping. A total of 34 QTLs (including five major ones), were detected. Our study provides information on QTLs for root architecture and heat tolerance which could potentially be considered in durum wheat breeding programs.

Bedeutung von allelen Varianten des Hexose-Transporters Hxt3p und der Hexokinasen Hxk1p und Hxk2p für Aufnahme und Verwertung von Glucose und Fructose durch Weinhefen

In Hinsicht darauf, dass sich S. cerevisiae-Stämme im Laufe der Domestizierung und Anpassung an verschiedene Habitate genetisch verändert haben, wurde in dieser Arbeit eine repräsentative Auswahl von Labor-, kommerziellen und in der Natur vorkommenden Saccharomyces-Stämmen und ihren Interspezies-Hybriden auf die Verbreitung alleler Varianten der Hexokinase-Gene HXK1 und HXK2 getestet. Von den Hexose-Transportern stand Hxt3p im Mittelpunkt, da seine essentielle Rolle bei der Vergärung von Glucose und Fructose bereits belegt wurde.rnIn dieser Arbeit wurde gezeigt, dass es bedeutende Unterschiede in der Vergärung von Glucose und Fructose zwischen Weinhefen der Gattung Saccharomyces gibt, die z.T. mit Struktur-Varianten des Hexose-Transporter Hxt3p korrelieren. rnInsgesamt 51 Hefestämme wurden auf ihre allele Variante des HXT3-Gens untersucht. Dabei haben sich drei Hauptgruppen (die Fermichamp®-Typ Gruppe, Bierhefen und Hybrid-Stämme) mit unterschiedlichem HXT3-Allel ergeben. Im Zusammenhang mit der Weinherstellung wurden signifikante Nukleotid-Substitutionen innerhalb des HXT3-Gens der robusten S. cerevisiae-Stämme (wie z.B. Sekthefen, kommerzielle Starterkulturen) und Hybrid-Stämmen festgestellt. Diese Hefen zeichneten sich durch die Fähigkeit aus, den Most trotz stressigen Umwelt-Bedingungen (wie hohe Ethanol-Konzentration, reduzierter Ammonium-Gehalt, ungünstiges Glucose:Fructose-Verhältnis) zu vergären. rnDie Experimente deuten darauf hin, dass die HXT3-Allel-Variante des als Starterkultur verwendbaren Stammes Fermichamp®, für den verstärkten Fructose-Abbau verantwortlich ist. Ein gleiches Verhalten der Stämme mit dieser Allel-Variante wurde ebenfalls beobachtet. Getestet wurden die S. cerevisiae-Stämme Fermichamp® und 54.41, die bezüglich Hxt3p-Aminosäuresequenz gleich sind, gegenüber zwei S. cerevisiae-Stämmen mit dem HXT3-Standard-Alleltyp Fermivin® und 33. Der Unterschied in der Hexose-Verwertung zwischen Stämmen mit Fermichamp®- und Standard-Alleltyp war in der Mitte des Gärverlaufs am deutlichsten zu beobachten. Beide Gruppen, sowohl mit HXT3 Fermichamp®- als auch Fermivin®-Alleltyp vergoren die Glucose schneller als die Fructose. Der Unterschied aber zwischen diesen HXT3-Alleltypen bei der Zucker-Verwertung lag darin, dass der Fermichamp®-Typ eine kleinere Differenz in der Abbau-Geschwindigkeit der beiden Hexosen zeigte als der Fermivin®-Typ. Die Zuckeraufnahme-Messungen haben die relativ gute Fructose-Aufnahme dieser Stämme bestätigt.rnEbenfalls korrelierte der fructophile Charakter des Triple-Hybrides S. cerevisiae x S. kudriavzevii x S. bayanus-Stamm HL78 in Transportexperimenten mit verstärkter Aufnahme von Fructose im Vergleich zu Glucose. Insgesamt zeigte dieser Stamm ähnliches Verhalten wie die S. cerevisiae-Stämme Fermichamp® und 54.41. rnIn dieser Arbeit wurde ein Struktur-Modell des Hexose-Transporters Hxt3p erstellt. Als Basis diente die zu 30 % homologe Struktur des Proton/Xylose-Symporters XylE aus Escherichia coli. Anhand des Hxt3p-Modells konnten Sequenzbereiche mit hoher Variabilität (Hotspots) in drei Hxt3p-Isoformen der Hauptgruppen (die Fermichamp®-Typ Gruppe, Bierhefen und Hybrid-Stämme) detektiert werden. Diese signifikanten Aminosäure-Substitutionen, die eine mögliche Veränderung der physikalischen und chemischen Eigenschaften des Carriers mit sich bringen, konzentrieren sich auf drei Bereiche. Dazu gehören die Region zwischen den N- und C-terminalen Domänen, die cytosolische Domäne und der Outside-Loop zwischen Transmembranregion 9 und Transmembranregion 10. rnObwohl die Transportmessungen keinen Zusammenhang zwischen Stämmen mit unterschiedlichen HXT3-Allelen und ihrer Toleranz gegenüber Ethanol ergaben, wurde ein signifikanter Anstieg in der Zuckeraufnahme nach vorheriger 24-stündiger Inkubation mit 4 Vol% Ethanol bei den Teststämmen beobachtet. rnInsgesamt könnten allele Varianten von HXT3-Gen ein nützliches Kriterium bei der Suche nach robusten Hefen für die Weinherstellung oder für andere industrielle Anwendungen sein. Die Auswirkung dieser Modifikationen auf die Struktur und Effizienz des Hexose-Transporters, sowie der mögliche Zusammenhang mit Ethanol-Resistenz müssen weiter ausführlich untersucht werden. rnEin Zusammenhang zwischen den niedrig variablen Allel-Varianten der Hexokinase-Gene HXK1 und HXK2 und dem Zucker-Metabolismus wurde nicht gefunden. Die Hexokinasen der untersuchten Stämme wiesen allerdings generell eine signifikante geringere Affinität zu Fructose im Vergleich zu Glucose auf. Hier liegt sicherlich eine Hauptursache für den Anstieg des Fructose:Glucose-Verhältnisses im Laufe der Vergärung von Traubenmosten.rn

Gene expression responses to acute and chronic heat stress in the common reef-building coral Pocillopora verrucosa

Global climate change is impacting coral reefs worldwide, with approximately 19% of reefs being permanently degraded, 15% showing symptoms of imminent collapse, and 20% at risk of becoming critically affected in the next few decades. This alarming level of reef degradation is mainly due to an increase in frequency and intensity of natural and anthropogenic disturbances. Recent evidence has called into question whether corals have the capacity to acclimatize or adapt to climate changes and some groups of corals showed inherent physiological tolerance to environmental stressors. The aim of the present study was to evaluate mRNA expression patterns underlying differences in thermal tolerance in specimen of the common reef-building coral Pocillopora verrucosa collected at different locations in Bangka Island waters (North Sulawesi, Indonesia). Part of the experimental work was carried out at the CoralEye Reef Research Outpost (Bangka Island). This includes sampling of corals at selected sites and at different depths (3 and 12 m) as well as their experimental exposure to an increased water temperature under controlled conditions for 3 and 7 days. Levels of mRNAs encoding ATP synthase (ATPs) NADH dehydrogenase (NDH) and a 70kDa Heat Shock Protein (HSP70) were evaluated by quantitative real time PCR. Transcriptional profiles evaluated under field conditions suggested an adaptation to peculiar local environmental conditions in corals collected at different sites and at the low depth. Nevertheless, high–depth collected corals showed a less pronounced site-to-site separation suggesting more homogenous environmental conditions. Exposure to an elevated temperature under controlled conditions pointed out that corals adapted to the high depth are more sensitive to the effects of thermal stress, so that reacted to thermal challenge by significantly over-expressing the selected gene products. Being continuously exposed to fluctuating environmental conditions, low-depth adapted corals are more resilient to the stress stimulus, and indeed showed unaffected or down-regulated mRNA expression profiles. Overall these results highlight that transcriptional profiles of selected genes involved in cellular stress response are modulated by natural seasonal temperature changes in P. verrucosa. Moreover, specimens living in more variable habitats (low-depth) exhibit higher basal HSP70 mRNA levels, possibly enhancing physiological tolerance to environmental stressors.

The effect of temperature on pressure tolerance of the shallow-water shrimp Palaemon serratus

Tolerance to low temperature and high pressure may allow shallow-water species to extend bathymetric range in response to changing climate, but adaptation to contrasting shallow-water environments may affect tolerance to these factors. The brackish shallow-water shrimp Palaemon varians demonstrates remarkable tolerance to elevated hydrostatic pressure and low temperature, but inhabits a highly variable environment: environmental adaptation may therefore make P. varians tolerances unrepresentative of other shallow-water species. Critical thermal maximum (CTmax), critical hydrostatic pressure maximum (CPmax), and acute respiratory response to hydrostatic pressure were assessed in the shallow-water shrimp Palaemon serratus, which inhabits a more stable intertidal habitat. P. serratus’ CTmax was 22.3°C when acclimated at 10°C, and CPmax was 5.9, 10.1, and 14.1 MPa when acclimated at 5, 10, and 15°C respectively: these critical tolerances were consistently lower than P. varians. Respiratory responses to acute hyperbaric exposures similarly indicated lower tolerance to hydrostatic pressure in P. serratus than in P. varians. Contrasting tolerances likely reflect physiological adaptation to differing environments and reveal that the capacity for depth-range extension may vary among species from different habitats.

Mild hypothermia during global cardiac ischemia opens a window of opportunity to develop heart donation after cardiac death

Although heart donation after cardiac death (DCD) could greatly improve graft availability, concerns regarding warm ischemic damage typically preclude transplantation. Improving tolerance to warm ischemia may thus open a window of opportunity for DCD hearts. We investigated the hypothesis that, compared with normothermia, mild hypothermia (32° C) initiated after ischemic onset improves cardiac functional recovery upon reperfusion. Isolated, working hearts from adult, male Wistar rats underwent global, no-flow ischemia, and reperfusion (n = 28). After ischemic onset, temperature was maintained at either 37° C for 20 or 30 min or reduced to 32° C for 40, 50, or 60 min. Recovery was measured after 60-min reperfusion. Following normothermic ischemia, recovery of rate-pressure product (RPP; per cent of preischemic value) was almost complete after 20-min ischemia (97 ± 9%), whereas no recovery was detectable after 30-min ischemia. After mildly hypothermic ischemia (32° C), RPP also recovered well after 40 min (86 ± 4%). Markers of metabolism and necrosis were similar in 37° C/20 min and 32° C/40 min groups. Simple reduction in cardiac temperature by a few degrees after the onset of global ischemia dramatically prolongs the interval during which the heart remains resistant to functional deterioration. Preservation of hemodynamic function is associated with improved metabolic recovery and reduced necrosis. The application of mild hypothermia may be a simple first step towards development of clinical protocols for DCD heart recovery.

Tolerance and Critical Thinking

Post-soviet countries are in the process of transformation from a totalitarian order to a democratic one, a transformation which is impossible without a profound shift in people's way of thinking. The group set themselves the task of determining the essence of this shift. Using a multidisciplinary approach, they looked at concrete ways of overcoming the totalitarian mentality and forming that necessary for an open democratic society. They studied the contemporary conceptions of tolerance and critical thinking and looked for new foundations of criticism, especially in hermeneutics. They then sought to substantiate the complementary relation between tolerance and criticism in the democratic way of thinking and to prepare a a syllabus for teaching on the subject in Ukrainian higher education. In a philosophical exploration of tolerance they began with relgious tolerance as its first and most important form. Political and social interests often lay at the foundations of religious intolerance and this implicitly comprised the transition to religious tolerance when conditions changed. Early polytheism was more or less indifferent to dogmatic deviations but monotheism is intolerant of heresies. The damage wrought by the religious wars of the Reformations transformed tolerance into a value. They did not create religious tolerance but forced its recognition as a positive phenomenon. With the weakening of religious institutions in the modern era, the purely political nature of many conflicts became evident and this stimulated the extrapolation of tolerance into secular life. Each historical era has certain acts and operations which may be interpreted as tolerant and these can be classified as to whether or not they are based on the conscious following of the principle of tolerance. This criterion requires the separation of the phenomenon of tolerance from its concept and from tolerance as a value. Only the conjunction of a concept of tolerance with a recognition of its value can transform it into a principle dictating a norm of conscious behaviour. The analysis of the contemporary conception of tolerance focused on the diversity of the concept and concluded that the notions used cannot be combined in the framework of a single more or less simple classification, as the distinctions between them are stimulated by the complexity of the realty considered and the variety of its manifestations. Notions considered in relation to tolerance included pluralism, respect and particular-universal. The rationale of tolerance was also investigated and the group felt that any substantiation of the principle of tolerance must take into account human beings' desire for knowledge. Before respecting or being tolerant of another person different from myself, I should first know where the difference lies, so knowledge is a necessary condition of tolerance.The traditional division of truth into scientific (objective and unique) and religious, moral, political (subjective and so multiple) intensifies the problem of the relationship between truth and tolerance. Science was long seen as a field of "natural" intolerance whereas the validity of tolerance was accepted in other intellectual fields. As tolerance eemrges when there is difference and opposition, it is essentially linked with rivaly and there is a a growing recognition today that unlimited rivalry is neither able to direct the process of development nor to act as creative matter. Social and economic reality has led to rivalry being regulated by the state and a natural requirement of this is to associate tolerance with a special "purified" form of rivalry, an acceptance of the actiivity of different subjects and a specification of the norms of their competition. Tolerance and rivalry should therefore be subordinate to a degree of discipline and the group point out that discipline, including self-discipline, is a regulator of the balance between them. Two problematic aspects of tolerance were identified: why something traditionally supposed to have no positive content has become a human activity today, and whether tolerance has full-scale cultural significance. The resolution of these questions requires a revision of the phenomenon and conception of tolerance to clarify its immanent positive content. This involved an investigation of the contemporary concept of tolerance and of the epistemological foundations of a negative solution of tolerance in Greek thought. An original soution to the problem of the extrapolation of tolerance to scientific knowledge was proposed based on the Duhem-Quine theses and conceptiion of background knowledge. In this way tolerance as a principle of mutual relations between different scientific positions gains an essential epistemological rationale and so an important argument for its own universal status. The group then went on to consider the ontological foundations for a positive solution of this problem, beginning with the work of Poincare and Reichenbach. The next aspect considered was the conceptual foundations of critical thinking, looking at the ideas of Karl Popper and St. Augustine and at the problem of the demarcation line between reasonable criticism and apologetic reasoning. Dogmatic and critical thinking in a political context were also considered, before an investigation of critical thinking's foundations. As logic is essential to critical thinking, the state of this discipline in Ukrainian and Russian higher education was assessed, together with the limits of formal-logical grounds for criticism, the role of informal logical as a basis for critical thinking today, dialectical logic as a foundation for critical thinking and the universality of the contemporary demand for criticism. The search for new foundations of critical thinking covered deconstructivism and critical hermeneutics, including the problem of the author. The relationship between tolerance and criticism was traced from the ancient world, both eastern and Greek, through the transitional community of the Renaissance to the industrial community (Locke and Mill) and the evolution of this relationship today when these are viewed not as moral virtues but as ordinary norms. Tolerance and criticism were discussed as complementary manifestations of human freedom. If the completeness of freedom were accepted it would be impossible to avoid recognition of the natural and legal nature of these manifestations and the group argue that critical tolerance is able to avoid dismissing such negative phenomena as the degradation of taste and manner, pornography, etc. On the basis of their work, the group drew up the syllabus of a course in "Logic with Elements of Critical Thinking, and of a special course on the "Problem of Tolerance".

Analysis of spring break-up and its effects on a biomass feedstock supply chain in northern Michigan

Demand for bio-fuels is expected to increase, due to rising prices of fossil fuels and concerns over greenhouse gas emissions and energy security. The overall cost of biomass energy generation is primarily related to biomass harvesting activity, transportation, and storage. With a commercial-scale cellulosic ethanol processing facility in Kinross Township of Chippewa County, Michigan about to be built, models including a simulation model and an optimization model have been developed to provide decision support for the facility. Both models track cost, emissions and energy consumption. While the optimization model provides guidance for a long-term strategic plan, the simulation model aims to present detailed output for specified operational scenarios over an annual period. Most importantly, the simulation model considers the uncertainty of spring break-up timing, i.e., seasonal road restrictions. Spring break-up timing is important because it will impact the feasibility of harvesting activity and the time duration of transportation restrictions, which significantly changes the availability of feedstock for the processing facility. This thesis focuses on the statistical model of spring break-up used in the simulation model. Spring break-up timing depends on various factors, including temperature, road conditions and soil type, as well as individual decision making processes at the county level. The spring break-up model, based on the historical spring break-up data from 27 counties over the period of 2002-2010, starts by specifying the probability distribution of a particular county’s spring break-up start day and end day, and then relates the spring break-up timing of the other counties in the harvesting zone to the first county. In order to estimate the dependence relationship between counties, regression analyses, including standard linear regression and reduced major axis regression, are conducted. Using realizations (scenarios) of spring break-up generated by the statistical spring breakup model, the simulation model is able to probabilistically evaluate different harvesting and transportation plans to help the bio-fuel facility select the most effective strategy. For early spring break-up, which usually indicates a longer than average break-up period, more log storage is required, total cost increases, and the probability of plant closure increases. The risk of plant closure may be partially offset through increased use of rail transportation, which is not subject to spring break-up restrictions. However, rail availability and rail yard storage may then become limiting factors in the supply chain. Rail use will impact total cost, energy consumption, system-wide CO2 emissions, and the reliability of providing feedstock to the bio-fuel processing facility.

Exploring the MHC-peptide matrix of central tolerance in the human thymus

Ever since it was discovered that central tolerance to self is imposed on developing T cells in the thymus through their interaction with self-peptide major histocompatibility complexes on thymic antigen-presenting cells, immunologists have speculated about the nature of these peptides, particularly in humans. Here, to shed light on the so-far unknown human thymic peptide repertoire, we analyse peptides eluted from isolated thymic dendritic cells, dendritic cell-depleted antigen-presenting cells and whole thymus. Bioinformatic analysis of the 842 identified natural major histocompatibility complex I and II ligands reveals significant cross-talk between major histocompatibility complex-class I and II pathways and differences in source protein representation between individuals as well as different antigen-presenting cells. Furthermore, several autoimmune- and tumour-related peptides, from enolase and vimentin for example, are presented in the healthy thymus. 302 peptides are directly derived from negatively selecting dendritic cells, thus providing the first global view of the peptide matrix in the human thymus that imposes self-tolerance in vivo.

Ventilatory response to nitrogen multiple-breath washout in infants

BACKGROUND Nitrogen multiple-breath washout (N2 MBW) using 100% oxygen (O2 ) has regained interest to assess efficiency of tracer gas clearance in, for example, children with Cystic Fibrosis (CF). However, the influence of hyperoxia on the infants' respiratory control is unclear. We assessed safety and impact on breathing pattern from hyperoxia, and if exposure to 40% O2 first induces tolerance to subsequent 100% O2 for N2 MBW. METHODS We prospectively enrolled 39 infants aged 3-57 weeks: 15 infants with CF (8 sedated for testing) and 24 healthy controls. Infants were consecutively allocated to the protocols comprising of 100% O2 or 40/100% O2 administered for 30 breaths. Lung function was measured using an ultrasonic flowmeter setup. Primary outcome was tidal volume (VT ). RESULTS None of the infants experienced apnea, desaturation, or bradycardia. Both protocols initially induced hypoventilation. VT temporarily declined in 33/39 infants across 10-25 breaths. Hypoventilation occurred independent of age, disease, and sedation. In the new 40/100% O2 protocol, VT returned to baseline during 40% O2 and remained stable during 100% O2 exposure. End-tidal carbon dioxide monitored online did not change. CONCLUSION The classical N2 MBW protocol with 100% O2 may change breathing patterns of the infants. The new protocol with 40% O2 induces hyperoxia-tolerance and does not lead to changes in breathing patterns during later N2 washout using 100% O2 . Both protocols are safe, the new protocol seems an attractive option for N2 MBW in infants. Pediatr Pulmonol. © 2013 Wiley Periodicals, Inc.

Seedling resistance, tolerance and escape from herbivores: insights from co-dominant canopy tree species in a resource-poor African rain forest

* Although plants can reduce the impacts of herbivory in multiple ways, these defensive traits are often studied in isolation and an understanding of the resulting strategies is incomplete. * In the study reported here, empirical evidence was simultaneously evaluated for the three main sets of traits available to plants: (i) resistance through constitutive leaf traits, (ii) tolerance to defoliation and (iii) escape in space, for three caesalpiniaceous tree species Microberlinia bisulcata, Tetraberlinia bifoliolata and T. korupensis, which co-dominate groves within the lowland primary rain forest of Korup National Park (Cameroon). * Mesh cages were placed around individual wild seedlings to exclude insect herbivores at 41 paired canopy gap and understorey locations. After following seedling growth and survival for c. 2 years, caged and control treatments were removed, leaves harvested to determine nutrient and phenolic concentrations, leaf mass per area estimated, and seedling performance in gaps followed for a further c. 2 years to quantify tolerance to the leaf harvesting. * The more nutrient-rich leaves of the weakly shade-tolerant M. bisulcata were damaged much more in gaps than the two strongly shade-tolerant Tetraberlinia species, which had higher leaf mass per area and concentrations of total phenols. Conversely, the faster-growing M. bisulcata was better able to tolerate defoliation in terms of height growth (reflushing capacity), but not at maintaining overall leaf numbers, than the other two species. * Across gaps, insect-mediated Janzen–Connell effects were most pronounced for M. bisulcata, less so for T. korupensis, and not detectable for T. bifoliolata. The three species differed distinctly in their secondary metabolic profiles. * Taken together, the results suggested a conceptual framework linking the three sets of traits, one in which the three co-dominant species adopt different strategies towards herbivore pressure depending on their different responses to light availability. This study is one of the first in a natural forest ecosystem to examine resistance to, tolerance of, and escape from herbivory among a group of co-occurring tropical tree species.

Disentangling human tolerance and resistance against HIV.

In ecology, "disease tolerance" is defined as an evolutionary strategy of hosts against pathogens, characterized by reduced or absent pathogenesis despite high pathogen load. To our knowledge, tolerance has to date not been quantified and disentangled from host resistance to disease in any clinically relevant human infection. Using data from the Swiss HIV Cohort Study, we investigated if there is variation in tolerance to HIV in humans and if this variation is associated with polymorphisms in the human genome. In particular, we tested for associations between tolerance and alleles of the Human Leukocyte Antigen (HLA) genes, the CC chemokine receptor 5 (CCR5), the age at which individuals were infected, and their sex. We found that HLA-B alleles associated with better HIV control do not confer tolerance. The slower disease progression associated with these alleles can be fully attributed to the extent of viral load reduction in carriers. However, we observed that tolerance significantly varies across HLA-B genotypes with a relative standard deviation of 34%. Furthermore, we found that HLA-B homozygotes are less tolerant than heterozygotes. Lastly, tolerance was observed to decrease with age, resulting in a 1.7-fold difference in disease progression between 20 and 60-y-old individuals with the same viral load. Thus, disease tolerance is a feature of infection with HIV, and the identification of the mechanisms involved may pave the way to a better understanding of pathogenesis.