Electronic structure of interfaces between copper-hexadecafluoro-phthalocyanine and 2,5-bis(4-biphenylyl) bithiophene

The interfaces formed between copper-hexadecafluoro-phthalocyanine (F16CuPc) and 2,5-bis(4-biphenylyl) bithiophene (BP2T) were examined using photoemission and inverse photoemission spectroscopy. It is observed that in F16CuPc/BP2T the heterojunction is characterized by band bending in both materials, while in BP2T/F16CuPc the band bending is confined in BP2T only. The combination of the band bending and finite Debye lengths provides an explanation to the observed ambipolar behavior of the organic thin film transistors based on such heterojunctions.

Systematic investigation of alkali metal ion transfer across the micro- and nano-water/1,2-dichloroethane interfaces facilitated by dibenzo-18-crown-6

Facilitated alkali metal ion (M+= Li+, Na+, K+, Rb+, and Cs+) transfers across the micro- and nano-water/1,2-dichloroethane (W/DCE) interfaces supported at the tips of micro- and nanopipets by dibenzo-18-crown-6 (DB18C6) have been investigated systematically using cyclic voltammetry. The theory developed by Matsuda et al. was applied to estimate the association constants of DB18C6 and M+ in the DCE phase based on the experimental voltammetric results. The kinetic measurements for alkali metal ion transfer across the W/DCE interface facilitated by DB18C6 were conducted using nanopipets or-submicropipets, and the standard rate constants (k(0)) were evaluated by analysis of the experimental voltammetric data. They increase in the following order: k(Cs+)(0) < k(Li+)(0) < k(Rb+)(0) < k(Na+)(0) < k(K+)(0), which is in accordance with their association constants except Cs+ and Li+.

Windows编程中高精度定时的实现

介绍了Windows编程中两种高精度时钟控制的实现方法,可达到毫秒级的时间分辨率,给出了较为完整的例子,完全能应用于实际编程中。

Information system for ICP-AES in Windows environment

An information system for inductively coupled plasma atomic emission spectrometry (TCP-BES) in MS Windows environment was developed based on the previous work in the laboratory. The system contains the data of about 28 000 spectral lines and a function of ICP spectral simulation,so it would be very helpful for line selection. The system also contains the Kalman filter and factor analysis programmes written with MS Visual Basic(version 4.0), which can be used for spectral interference correction and peak position optimization. A large amount of real spectral scanning data of rare earth elements were included in the system for user's references. All these characteristics made the system more useful and practical.

IMPEDANCE STUDY OF THE INTERFACES BETWEEN LITHIUM, POLYANILINE, LITHIUM-DOPED MNO2 AND MODIFIED POLY(ETHYLENE OXIDE) ELECTROLYTE

Impedance study was carried out for the interfaces between lithium, polyaniline (PAn), lithium-doped MnO2 and modified poly(ethylene oxide) (PEO) electrolyte under various' conditions. The interfacial charge-transfer resistances R(ct) on PEO/PAn, R(ct) on PEO/LiMn2O4 increase with depth-of-discharge and decrease after the charge of the cell containing modified PEO as electrolyte. The charge-transfer resistance R(ct) on PEO/PAn is higher than R(ct) on PEO/LiMn2O4 under the same condition, since inserted species and mechanism are different for both cases. In the case of PAn, an additional charge-transfer resistance might be related to the electronic conductivity change in discharge/charge potential range, as it was evident from a voltammetry curve. With increasing cycle numbers, the charge-transfer resistance increases gradually. The impedance results also have shown that at low frequency the diffusion control is dominant in the process of the charge and discharge of Li/PEO/PAn or Li/PEO/LiMn2O4 cell. The diffusion coefficients have been calculated from impedance data.

ANESTHETIC LIDOCAINE AND DICAINE TRANSFER ACROSS LIQUID LIQUID INTERFACES

Lidocaine transfer across the water/1,2-dichloroethane and the water/nitrobenzene interfaces has been investigated by chronopotentiometry with linear current scanning and cyclic voltammetry. The irreversible hydrolysis occurring in the phase transfer of dicaine at the water/nitrobenzene interface is discussed.

基于Windows NT的开放式机器人控制系统

本文介绍了一个在WindowsNT平台上开发的工业机器人控制系统，该系统可在通用的工业计算机上运行，系统运行环境为WindowsNT加RTX实时扩展，可保证良好的实时性，该系统硬件平台为标准的PC硬件平台，控制软件采用模块化设计，具有良好的开放性和可扩展性。

基于Windows平台的开放式并联机床数控系统

以5坐标并联机床为依托,面向不同构型并联机床,采用“PMAC+IPC”双CPU为硬件平台、VisualC++6.0为软件平台,开发了基于Windows操作平台的开放式并联机床数控系统。本文介绍了本数控系统的硬件结构、软件构成,并对数控软件开发的关键技术进行了阐述。

Windows环境下用软件CODEC实现数字视频实时通信

讨论了Ｗｉｎｄｏｗｓ环境下利用软件编解码器实现视频压缩的方法和技巧，结合视频捕获和视频传输，以网络环境下机器人遥操作的实际应用为背景，给出了数字视频实时通信的编程实例。

基于Windows的大型ROV控制系统软件设计

针对Windows越来越能满足实时控制系统这一情形,本文在分析大型ROV控制系统的实时性基础上,进行了基于Windows的大型ROV实时控制系统软件设计,并给出了实际应用结果。应用结果表明,该控制系统软件运行稳定、可靠,很好的完成了对大型ROV的实时控制。

用Windows 2000构建企业网的安全体系

阐述了一种用Ｗｉｎｄｏｗｓ２０００构建企业Ｉｎｔｒａｎｅｔ的原理，并给出了一个应用实例，该方法适合中小企业以较高性价比，比较低的使用、维护费用通过公共网建立ＶＰＮ，并能安全地与Ｉｎｔｅｒｎｅｔ相连接，是一种切实可行的方案．

Exploring Vision-Based Interfaces: How to Use Your Head in Dual Pointing Tasks

The utility of vision-based face tracking for dual pointing tasks is evaluated. We first describe a 3-D face tracking technique based on real-time parametric motion-stereo, which is non-invasive, robust, and self-initialized. The tracker provides a real-time estimate of a ?frontal face ray? whose intersection with the display surface plane is used as a second stream of input for scrolling or pointing, in paral-lel with hand input. We evaluated the performance of com-bined head/hand input on a box selection and coloring task: users selected boxes with one pointer and colors with a second pointer, or performed both tasks with a single pointer. We found that performance with head and one hand was intermediate between single hand performance and dual hand performance. Our results are consistent with previously reported dual hand conflict in symmetric pointing tasks, and suggest that a head-based input stream should be used for asymmetric control.

Projeções de superfície 3D no plano para análise de interfaces proteicas através do Sting.

Análise, de forma visual, de como algumas grandezas físico-químico estão presentes na interface proteica. A proteína é mostrada em 3 dimensões(3D). Cada região da cadeia proteic é colorida com uma cor diferente, representando a variaçao de características físico-químicas na cadeia

Uso de XML para representação de interfaces com o usuário.

Estrutura da ferramenta ServCLIPS. Representação de interfaces com o usuário em XML.