Early childhood caries in Switzerland: a marker of social inequalities.

BACKGROUND: Early childhood caries (ECC) is a marker of social inequalities worldwide because disadvantaged children are more likely to develop caries than their peers. This study aimed to define the ECC prevalence among children living in French-speaking Switzerland, where data on this topic were scarce, and to assess whether ECC was an early marker of social inequalities in this country. METHODS: The study took place between 2010 and 2012 in the primary care facility of Lausanne Children's Hospital. We clinically screened 856 children from 36 to 71 months old for ECC, and their caregivers (parents or legal guardians) filled in a questionnaire including items on socioeconomic background (education, occupation, income, literacy and immigration status), dental care and dietary habits. Prevalence rates, prevalence ratios and logistic regressions were calculated. RESULTS: The overall ECC prevalence was 24.8 %. ECC was less frequent among children from higher socioeconomic backgrounds than children from lower ones (prevalence ratios ≤ 0.58). CONCLUSIONS: This study reported a worrying prevalence rate of ECC among children from 36 to 71 months old, living in French-speaking Switzerland. ECC appears to be a good marker of social inequalities as disadvantaged children, whether from Swiss or immigrant backgrounds, were more likely to have caries than their less disadvantaged peers. Specific preventive interventions regarding ECC are needed for all disadvantaged children, whether immigrants or Swiss.

Use of fine-needle aspirate calcitonin to detect medullary thyroid carcinoma: A systematic review.

BACKGROUND: The measurement of calcitonin in washout fluids of thyroid nodule aspirate (FNA-calcitonin) has been reported as accurate to detect medullary thyroid carcinoma (MTC). The results from these studies have been promising and the most updated version of ATA guidelines quoted for the first time that "FNA findings that are inconclusive or suggestive of MTC should have calcitonin measured in the FNA washout fluid." Here we aimed to systematically review published data on this topic to provide more robust estimates. RESEARCH DESIGN AND METHODS: A comprehensive computer literature search of the medical databases was conducted by searching for the terms "calcitonin" AND "washout." The search was updated until April 2015. RESULTS: Twelve relevant studies, published between 2007 and 2014, were found. Overall, 413 thyroid nodules or neck lymph nodes underwent FNA-calcitonin, 95 were MTC lesions and 93 (97.9%) of these were correctly detected by this measurement regardless of their cytologic report. CONCLUSIONS: The present study shows that the above ATA recommendation is well supported. Almost all MTC lesions are correctly detected by FNA-calcitonin and this technique should be used to avoid false negative or inconclusive results from cytology. The routine determination of serum calcitonin in patients undergoing FNA should improve the selection of patients at risk for MTC, guiding the use of FNA-calcitonin in the same FNA sample and providing useful information to the cytopathologist for the morphological assessment and the application of tailored ancillary tests.

Jäähdytysnestekierron optimointi tuuliturbiinin konvertterikaapistoon

Diplomityössä perehdytään tuuliturbiinin konvertterikaapiston nestekierron tarkasteluun ja mittausten suunnitteluun sitä varten. Tarkastelun tulokset ovat yhdistettävissä konvertterikaapiston ilmapuolen jäähdytykseen, jolloin koko jäähdytysjärjestelmä on katettu. Työn alkupuolella perehdytään lyhyesti nykyhetken tuulivoimaan. Tämän jälkeen tarkastellaan itse konvertterikaapistoa, sen toimintaa sekä nestejäähdytyksen toteutusta komponentteineen. Työn keskimmäisessä osassa konvertterille tehtiin virtaustekninen malli aiempaa mittausdataa hyväksi käyttäen. Tällä mallilla suoritettiin herkkyystarkasteluja ja simuloitiin konvertterikaapiston nestekierron käyttäytymistä yhden tai useamman haaran tukkeutuessa osittain tai kokonaan. Lisäksi suunniteltiin uusi nestekierto. Lopuksi selvitetään mittauksissa tarvittava laitteisto, perehdytään kunkin laitteen toimintaperiaatteeseen sekä selvennetään suositeltavat asennuspaikat ja suojaetäisyydet.

Soveltuvuuden arviointiperusteet kansallisissa julkisissa hankinnoissa

Osallistuessaan julkisten hankintojen tarjouskilpailuun yritys pyrkii tekemään tarjouksen, jolla se voittaa kilpailun. Ennen tarjousten vertailua yrityksen soveltuvuus arvioidaan tarjoajien valinnassa. Tutkimuksen tavoite on selvittää miten yritys voi varmistaa tarjousvertailuun pääsyn. Tutkimusmenetelmänä on lainoppi. Empiirisessä osiossa aineistona ovat hankintailmoitukset ja -aineistot, joita analysoidaan kvalitatiivisen tutkimuksen keinoin. Lain, lainvalmisteluaineiston, oikeuskirjallisuuden ja oikeuskäytännön perusteella muodostetaan peilaavan vastauksen malli. Yritys varmistaa jatkoon pääsyn, kun se tarjouksessaan kuvaa resurssinsa peilaten hankintayksikön ilmoittamia vaatimuksia sekä toimittaa vaaditut liiteasiakirjat määräajassa. Aineiston perusteella mallin todetaan toimivan silloin, kun myös hankintayksikkö toimii mallin odotusten mukaan. Kun hankintayksikkö ei toimi mallin oletusten mukaisesti, yrityksen mallin mukaista toimintaa ei voi arvioida.

Modelling nitrogen and phosphorus loads in a Mediterranean river catchment (La Tordera, NE Spain)

Human activities have resulted in increased nutrient levels in many rivers all over Europe. Sustainable management of river basins demands an assessment of the causes and consequences of human alteration of nutrient flows, together with an evaluation of management options. In the context of an integrated and interdisciplinary environmental assessment (IEA) of nutrient flows, we present and discuss the application of the nutrient emission model MONERIS (MOdelling Nutrient Emissions into River Systems) to the Catalan river basin, La Tordera (north-east Spain), for the period 1996–2002. After a successful calibration and verification process (Nash-Sutcliffe efficiencies E=0.85 for phosphorus and E=0.86 for nitrogen), the application of the model MONERIS proved to be useful in estimating nutrient loads. Crucial for model calibration, in-stream retention was estimated to be about 50 % of nutrient emissions on an annual basis. Through this process, we identified the importance of point sources for phosphorus emissions (about 94% for 1996–2002), and diffuse sources, especially inputs via groundwater, for nitrogen emissions (about 31% for 1996–2002). Despite hurdles related to model structure, observed loads, and input data encountered during the modelling process, MONERIS provided a good representation of the major interannual and spatial patterns in nutrient emissions. An analysis of the model uncertainty and sensitivity to input data indicates that the model MONERIS, even in data-starved Mediterranean catchments, may be profitably used by water managers for evaluating quantitative nutrient emission scenarios for the purpose of managing river basins. As an example of scenario modelling, an analysis of the changes in nutrient emissions through two different future scenarios allowed the identification of a set of relevant measures to reduce nutrient loads.

Removal of chromium (vi) in aqueous environments using cork and heat-treated cork samples from quercus cerris and quercus suber

Chromium (VI) removal and its reduction to chromium (III) from aqueous solution by untreated and heat-treated Quercus cerris and heat-treated Quercus suber black agglomerate cork granules was investigated. Initial screening studies revealed that among the sorbents tested, untreated Q. cerris and Q. suber black agglomerate are the most efficient in the removal of Cr(VI) ions and were selected for adsorption essays. Heat treatment adversely affected chromium adsorption and chromium (VI) reduction in Q. cerris cork. The highest metal uptake was found at pH 3.0 for Q. cerris and pH 2.0 for black agglomerate. The experimental data fitted the Langmuir model and the calculated qmax was 22.98 mg/g in black agglomerate and 21.69 mg/g in untreated Q. cerris cork. The FTIR results indicated that while in black agglomerate, lignin is the sole component responsible for Cr(VI) sorption, and in untreated Q. cerris cork, suberin and polysaccharides also play a significant role on the sorption. The SEM-EDX results imply that chromium has a homogenous distribution within both cork granules. Also, phloemic residues in Q. cerris granules showed higher chromium concentration. The results obtained in this study show that untreated Q. cerris and black agglomerate cork granules can be an effective and economical alternative to more costly materials for the treatment of liquid wastes containing chromium

Análise térmica aplicada ao estudo de materiais energéticos

This paper shows different aspects related to the application of different thermal analysis techniques in the study of energetic materials. The criteria used to choose the best technique and an exact approach to adjust the experimental data with a proper model are here discussed. The paper shows how to use the different thermal analysis results to help develop new compounds, to study the stability of some energetic materials and their compatibility, and the conditions necessary for a secure storing environment.

Programació d'una aplicació gràfica per l'anàlisi de senyals usant LDB (Local Discriminant Bases) i MLDB (Modified LDB)

Tot seguit presentem un entorn per analitzar senyals de tot tipus amb LDB (Local Discriminant Bases) i MLDB (Modified Local Discriminant Bases). Aquest entorn utilitza funcions desenvolupades en el marc d’una tesi en fase de desenvolupament. Per entendre part d’aquestes funcions es requereix un nivell de coneixement avançat de processament de senyals. S’han extret dels treballs realitzats per Naoki Saito [3], que s’han agafat com a punt de partida per la realització de l’algorisme de la tesi doctoral no finalitzada de Jose Antonio Soria. Aquesta interfície desenvolupada accepta la incorporació de nous paquets i funcions. Hem deixat un menú preparat per integrar Sinus IV packet transform i Cosine IV packet transform, tot i que també podem incorporar-n’hi altres. L’aplicació consta de dues interfícies, un Assistent i una interfície principal. També hem creat una finestra per importar i exportar les variables desitjades a diferents entorns. Per fer aquesta aplicació s’han programat tots els elements de les finestres, en lloc d’utilitzar el GUIDE (Graphical User Interface Development Enviroment) de MATLAB, per tal que sigui compatible entre les diferents versions d’aquest programa. En total hem fet 73 funcions en la interfície principal (d’aquestes, 10 pertanyen a la finestra d’importar i exportar) i 23 en la de l’Assistent. En aquest treball només explicarem 6 funcions i les 3 de creació d’aquestes interfícies per no fer-lo excessivament extens. Les funcions que explicarem són les més importants, ja sigui perquè s’utilitzen sovint, perquè, segons la complexitat McCabe, són les més complicades o perquè són necessàries pel processament del senyal. Passem cada entrada de dades per part de l’usuari per funcions que ens detectaran errors en aquesta entrada, com eliminació de zeros o de caràcters que no siguin números, com comprovar que són enters o que estan dins dels límits màxims i mínims que li pertoquen.

Integrating user experience into early phases of software development

The value and benefits of user experience (UX) are widely recognized in the modern world and UX is seen as an integral part of many fields. This dissertation integrates UX and understanding end users with the early phases of software development. The concept of UX is still unclear, as witnessed by more than twenty-five definitions and ongoing argument about its different aspects and attributes. This missing consensus forms a problem in creating a link between UX and software development: How to take the UX of end users into account when it is unclear for software developers what UX stands for the end users. Furthermore, currently known methods to estimate, evaluate and analyse UX during software development are biased in favor of the phases where something concrete and tangible already exists. It would be beneficial to further elaborate on UX in the beginning phases of software development. Theoretical knowledge from the fields of UX and software development is presented and linked with surveyed and analysed UX attribute information from end users and UX professionals. Composing the surveys around the identified 21 UX attributes is described and the results are analysed in conjunction with end user demographics. Finally the utilization of the gained results is explained with a proof of concept utility, the Wizard of UX, which demonstrates how UX can be integrated into early phases of software development. The process of designing, prototyping and testing this utility is an integral part of this dissertation. The analyses show statistically significant dependencies between appreciation towards UX attributes and surveyed end user demographics. In addition, tests conducted by software developers and industrial UX designer both indicate the benefits and necessity of the prototyped Wizard of UX utility. According to the conducted tests, this utility meets the requirements set for it: It provides a way for software developers to raise their know-how of UX and a possibility to consider the UX of end users with statistical user profiles during the early phases of software development. This dissertation produces new and relevant information for the UX and software development communities by demonstrating that it is possible to integrate UX as a part of the early phases of software development.

Sumea suositin elokuville

Suositusmenetelmien tarkoituksena on auttaa käyttäjää löytämään häntä kiinnostavia asioita ja välttämään asioita, joista hän ei pitäisi. Suositusmenetelmät antavat suosituk- set yleensä terävinä lukuina. Tässä työssä kehitetään suositusmenetelmä, joka antaa suo- situkset arvosanojen sumeina jäsenyysasteina. Menetelmän antamat suositukset voidaan myös perustella käyttäjälle. Menetelmä kuuluu pääosin yhteisösuodatusmenetelmiin, jois- sa suositukset tehdään käyttäjien antamien arvosanojen perusteella, mutta myös tietoa elokuvien tyylilajeista hyödynnetään suositustarkkuuden parantamiseksi. Sumeiden suo- situsten suositeltavuusjärjestyksen laskemiseen esitetään myös menetelmä. Käyttäjien elokuville antamat arvosanat voidaan käsittää sumeana datana. Käyttäjä voi kuvata arvosanaa esimerkiksi ilmaisulla ”noin 4”. Tästä syystä on loogista esittää suo- situksetkin sumeina lukuina. Tällöin käyttäjälle voidaan antaa tietoa suosituksen tark- kuudesta ja mahdollisista ristiriidoista. Epävarmojen suositusten tapauksessa käyttäjä voi painottaa enemmän muita tietolähteitä. Kokeiden perusteella kehitetty menetelmä antaa joissa tapauksissa selvästi vertailtavia menetelmiä parempia suosituksia, kun taas toisissa tapauksissa suositukset ovat selvästi heikompia.

Impact of ivermectin-resistant gastrointestinal nematodes in feedlot cattle in Argentina

The aim was to evaluate for 75 days the impact on production of the remaining burden of ivermectin (IVM)-resistant parasites in naturally infected feedlot calves. The herds came from tick-infested areas of cattle breeding where the systematic use of IVM to control tick increases the gastrointestinal parasites resistant to this drug. This investigation was carried out in two commercial feedlots in Buenos Aires province. In feedlot A, two groups of 35 animal each received IVM 1% and the other received ricobendazole (RBZ) 10% respectively. The same was done in feedlot B. On day 0, two groups of 35 animals were made in feedlots A and B. Fecal samples were taken on days 0, 22, 54 and 75 pos-treatment (PT), and body weight was registered, from each animal. Fecal samples were processed for individual count of eggs per gram (EPG) and pooled fecal culture was carried out for identification of the parasite genus in each sampling. Fecal egg count reduction test (FECR) was calculated on day 22 PT. The study design used was a totally randomized block, with commercial feedlot and sex as block variables. For data analysis, a mixed model of the SAS statistical program was used. The FECR average on day 22 was 28.4% in the IVM group, and 94,2 % in the RBZ group . From this date on, significant differences in EPG were kept until day 54. EPG counts were only equal near the end of the trial, on day 75 (p=0.16). In both commercial feedlots, especially in the IVM group, Cooperia spp. was the most prevalent parasite in the fecal cultures. Significant differences in weight (P<0.01) on post-treatment day 75 was found between the average weight in the RBZ and the IVM group (246 vs. 238 kg respectively), what means a difference of 8.3% in gains. The importance for production in the antiparasite failure treatment in commercial feedlots was demonstrated, and the need of pos-treatment controls to evaluate the efficacy of the antiparasitic administered is emphasized.

Comparison between one-dimensional uncoupled and convection-conduction conjugated approaches in finned surface heat transfer

This work studies the forced convection problem in internal flow between concentric annular ducts, with radial fins at the internal tube surface. The finned surface heat transfer is analyzed by two different approaches. In the first one, it is assumed one-dimensional heat conduction along the internal tube wall and fins, with the convection heat transfer coefficient being a known parameter, determined by an uncoupled solution. In the other way, named conjugated approach, the mathematical model (continuity, momentum, energy and K-epsilon equations) applied to tube annuli problem was numerically solved using finite element technique in a coupled formulation. At first time, a comparison was made between results obtained for the conjugated problem and experimental data, showing good agreement. Then, the temperature profiles under these two approaches were compared to each other to analyze the validity of the one-dimensional classical formulation that has been utilized in the heat exchanger design.

Integration of JINR Information Resources

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Kramerius - Fedora based open source system for a digital library

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

A pulsatile flow model for in vitro quantitative evaluation of prosthetic valve regurgitation

A pulsatile pressure-flow model was developed for in vitro quantitative color Doppler flow mapping studies of valvular regurgitation. The flow through the system was generated by a piston which was driven by stepper motors controlled by a computer. The piston was connected to acrylic chambers designed to simulate "ventricular" and "atrial" heart chambers. Inside the "ventricular" chamber, a prosthetic heart valve was placed at the inflow connection with the "atrial" chamber while another prosthetic valve was positioned at the outflow connection with flexible tubes, elastic balloons and a reservoir arranged to mimic the peripheral circulation. The flow model was filled with a 0.25% corn starch/water suspension to improve Doppler imaging. A continuous flow pump transferred the liquid from the peripheral reservoir to another one connected to the "atrial" chamber. The dimensions of the flow model were designed to permit adequate imaging by Doppler echocardiography. Acoustic windows allowed placement of transducers distal and perpendicular to the valves, so that the ultrasound beam could be positioned parallel to the valvular flow. Strain-gauge and electromagnetic transducers were used for measurements of pressure and flow in different segments of the system. The flow model was also designed to fit different sizes and types of prosthetic valves. This pulsatile flow model was able to generate pressure and flow in the physiological human range, with independent adjustment of pulse duration and rate as well as of stroke volume. This model mimics flow profiles observed in patients with regurgitant prosthetic valves.