Complex meiotic configuration of the holocentric chromosomes: the intriguing case of the scorpion Tityus bahiensis

Mitotic and meiotic chromosomes of Tityus bahiensis were investigated using light (LM) and transmission electron microscopy (TEM) to determine the chromosomal characteristics and disclose the mechanisms responsible for intraspecific variability in chromosome number and for the presence of complex chromosome association during meiosis. This species is endemic to Brazilian fauna and belongs to the family Buthidae, which is considered phylogenetically basal within the order Scorpiones. In the sample examined, four sympatric and distinct diploid numbers were observed: 2n = 5, 2n = 6, 2n = 9, and 2 = 10. The origin of this remarkable chromosome variability was attributed to chromosome fissions and/or fusions, considering that the decrease in chromosome number was concomitant with the increase in chromosome size and vice versa. The LM and TEM analyses showed the presence of chromosomes without localised centromere, the lack of chiasmata and recombination nodules in male meiosis, and two nucleolar organiser regions carrier chromosomes. Furthermore, male prophase I cells revealed multivalent chromosome associations and/or unsynapsed or distinctly associated chromosome regions (gaps, less-condensed chromatin, or loop-like structure) that were continuous with synapsed chromosome segments. All these data permitted us to suggest that the chromosomal rearrangements of T. bahiensis occurred in a heterozygous state. A combination of various factors, such as correct disjunction and balanced segregation of the chromosomes involved in complex meiotic pairing, system of achiasmate meiosis, holocentric nature of the chromosomes, population structure, and species dispersion patterns, could have contributed to the high level of chromosome rearrangements present in T. bahiensis.

Synthesis, Characterization, and Electrocatalytic Activity toward Methanol Oxidation of Carbon-Supported Pt(x)-(RuO(2)-M)(1-x) Composite Ternary Catalysts (M = CeO(2), MoO(3), or PbO(x))

Carbon-supported platinum is commonly used as an anode electrocatalyst in low-temperature fuel cells fueled with methanol. The cost of Pt and the limited world supply are significant barriers for the widespread use of this type of fuel cell. Moreover, Pt used as anode material is readily poisoned by carbon monoxide produced as a byproduct of the alcohol oxidation. Although improvements in the catalytic performance for methanol oxidation were attained using Pt-Ru alloys, the state-of-the-art Pt-Ru catalyst needs further improvement because of relatively low catalytic activity and the high cost of noble Pt and Ru. For these reasons, the development of highly efficient ternary platinum-based catalysts is an important challenge. Thus, various compositions of ternary Pt(x)-(RuO(2)-M)(1-x)/C composites (M = CeO(2), MoO(3), or PbO(x)) were developed and further investigated as catalysts for the methanol electro-oxidation reaction. The characterization carried out by X-ray diffraction, energy-dispersive X-ray analysis, transmission electron microscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry point out that the different metallic oxides were successfully deposited on the Pt/C, producing small and well-controlled nanoparticles in the range of 2.8-4.2 nm. Electrochemical experiments demonstrated that the Pt(0.50)(RuO(2)-CeO(2))(0.50)/C composite displays the higher catalytic activity toward the methanol oxidation reaction (lowest onset potential of 207 mV and current densities taken at 450 mV, which are 140 times higher than those at commercial Pt/C), followed by the Pt(0.75)(RuO(2)-MoO(3))(0.25)/C composite. In addition, both of these composites produced low quantities of formic acid and formaldehyde when compared to a commercially available Pt(0.75)-Ru(0.25)/C composite (from E-Tek, Inc.), suggesting that the oxidation of methanol occurs mainly by a pathway that produces CO(2) forming the intermediary CO(ads).

Design and assessment of a large commercial Photovoltaic System in Barbados

One of the main aims of this thesis is to design an optimized commercial Photovoltaic (PV) system in Barbados from several variables such as racking type, module type and inverter type based on practicality, technical performance as well as financial returns to the client. Detailed simulations are done in PVSYST and financial models are used to compare different systems and their viability. Once the preeminent system is determined from a financial and performance perspective a detailed design is done using PVSYST and AutoCAD to design the most optimal PV system for the customer. In doing so, suitable engineering drawings are generated which are detailed enough for construction of the system. Detailed cost with quotes from relevant manufacturers, suppliers and estimators become instrumental in determining Balance of System Costs in addition to total project cost. The final simulated system is suggested with a PV capacity of 425kW and an inverter output of 300kW resulting in an array oversizing of 1.42. The PV system has a weighted Performance Ratio of 77 %, a specific yield of 1467 kWh/kWp and a projected annual production of 624 MWh/yr. This system is estimated to offset approximately 28 % of Carlton’s electrical load annually. Over the course of 20 years the PV system is projected to produce electricity at a cost of $0.201USD/kWh which is significantly lower than the $0.35 USD/kWh paid to the utility at the time of writing this thesis. Due to the high cost of electricity on the island, an attractive Feed-In-Tariff is not necessary to warrant the installation of a commercial System which over a lifetime which produces electricity at less than 60% of the cost to the user purchasing electricity from the utility. A simple payback period of 5.4 years, a return on investment of 17 % without incentives, in addition to an estimated diversion of 6840 barrels of oil or 2168 tonnes of CO2 further provides compelling justification for the installation of a commercial Photovoltaic System not only on Carlton A-1 Supermarket, but also island wide as well as regionally where most electricity supplies are from imported fossil fuels.

On the welfare costs of business cycles in the 20th century

Lucas (1987) has shown a surprising result in business-cycle research, that the welfare cost of business cycles are relatively small. Using standard assumptions on preferences and a reasonable reduced form for consumption, we computed these welfare costs for the pre- and post-WWII era, using three alternative trend-cycle decomposition methods. The post-WWII period is very era this basic result is dramatically altered. For the Beveridge and Nelson decomposition, and reasonable preference parameter and discount values, we get a compensation of about 5% of consumption, which is by all means a sizable welfare cost (about US$ 1,000.00 a year).

On the welfare costs of business-cycle fluctuations and economic-growth variation in the 20th century

Lucas (1987) has shown a surprising result in business-cycle research: the welfare cost of business cycles are very small. Our paper has several original contributions. First, in computing welfare costs, we propose a novel setup that separates the effects of uncertainty stemming from business-cycle fluctuations and economic-growth variation. Second, we extend the sample from which to compute the moments of consumption: the whole of the literature chose primarily to work with post-WWII data. For this period, actual consumption is already a result of counter-cyclical policies, and is potentially smoother than what it otherwise have been in their absence. So, we employ also pre-WWII data. Third, we take an econometric approach and compute explicitly the asymptotic standard deviation of welfare costs using the Delta Method. Estimates of welfare costs show major differences for the pre-WWII and the post-WWII era. They can reach up to 15 times for reasonable parameter values -β=0.985, and ∅=5. For example, in the pre-WWII period (1901-1941), welfare cost estimates are 0.31% of consumption if we consider only permanent shocks and 0.61% of consumption if we consider only transitory shocks. In comparison, the post-WWII era is much quieter: welfare costs of economic growth are 0.11% and welfare costs of business cycles are 0.037% - the latter being very close to the estimate in Lucas (0.040%). Estimates of marginal welfare costs are roughly twice the size of the total welfare costs. For the pre-WWII era, marginal welfare costs of economic-growth and business- cycle fluctuations are respectively 0.63% and 1.17% of per-capita consumption. The same figures for the post-WWII era are, respectively, 0.21% and 0.07% of per-capita consumption.

On the welfare costs of business-cycle fluctuations and economic-growth variation in the 20th century

Lucas(1987) has shown a surprising result in business-cycle research: the welfare cost of business cycles are very small. Our paper has several original contributions. First, in computing welfare costs, we propose a novel setup that separates the effects of uncertainty stemming from business-cycle uctuations and economic-growth variation. Second, we extend the sample from which to compute the moments of consumption: the whole of the literature chose primarily to work with post-WWII data. For this period, actual consumption is already a result of counter-cyclical policies, and is potentially smoother than what it otherwise have been in their absence. So, we employ also pre-WWII data. Third, we take an econometric approach and compute explicitly the asymptotic standard deviation of welfare costs using the Delta Method. Estimates of welfare costs show major diferences for the pre-WWII and the post-WWII era. They can reach up to 15 times for reasonable parameter values = 0:985, and = 5. For example, in the pre-WWII period (1901-1941), welfare cost estimates are 0.31% of consumption if we consider only permanent shocks and 0.61% of consumption if we consider only transitory shocks. In comparison, the post-WWII era is much quieter: welfare costs of economic growth are 0.11% and welfare costs of business cycles are 0.037% the latter being very close to the estimate in Lucas (0.040%). Estimates of marginal welfare costs are roughly twice the size of the total welfare costs. For the pre-WWII era, marginal welfare costs of economic-growth and business-cycle uctuations are respectively 0.63% and 1.17% of per-capita consumption. The same gures for the post-WWII era are, respectively, 0.21% and 0.07% of per-capita consumption.

On the welfare costs of business-cycle fluctuations and economic-growth variation in the 20th century and beyond

The main objective of this paper is to propose a novel setup that allows estimating separately the welfare costs of the uncertainty stemming from business-cycle uctuations and from economic-growth variation, when the two types of shocks associated with them (respectively,transitory and permanent shocks) hit consumption simultaneously. Separating these welfare costs requires dealing with degenerate bivariate distributions. Levis Continuity Theorem and the Disintegration Theorem allow us to adequately de ne the one-dimensional limiting marginal distributions. Under Normality, we show that the parameters of the original marginal distributions are not afected, providing the means for calculating separately the welfare costs of business-cycle uctuations and of economic-growth variation. Our empirical results show that, if we consider only transitory shocks, the welfare cost of business cycles is much smaller than previously thought. Indeed, we found it to be negative - -0:03% of per-capita consumption! On the other hand, we found that the welfare cost of economic-growth variation is relatively large. Our estimate for reasonable preference-parameter values shows that it is 0:71% of consumption US$ 208:98 per person, per year.

Electricity, hot water and cold water production from biomass. Energetic and economical analysis of the compact system of cogeneration run with woodgas from a small downdraft gasifier

Wood gasification technologies to convert the biomass into fuel gas stand out. on the other hand, producing electrical energy from stationary engine is widely spread, and its application in rural communities where the electrical network doesn't exist is very required. The recovery of exhaust gases (engine) is a possibility that makes the system attractive when compared with the same components used to obtain individual heat such as electric power. This paper presents an energetic alternative to adapt a fixed bed gasifier with a compact cogeneration system in order to cover electrical and thermal demands in a rural area and showing an energy solution for small social communities using renewable fuels. Therefore, an energetic and economical analysis from a cogeneration system producing electric energy, hot and cold water, using wooden gas as fuel from a small-sized gasifier was calculated. The energy balance that includes the energy efficiency (electric generation as well as hot and cold water system; performance coefficient and the heat exchanger, among other items), was calculated. Considering the annual interest rates and the amortization periods, the costs of production of electrical energy, hot and cold water were calculated, taking into account the investment, the operation and the maintenance cost of the equipments. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.

High incidences of DNA ploidy abnormalities in tongue squamous cell carcinoma of young patients: an international collaborative study

Aims: This multi-centre analysis assessed the DNA content of TSCC in 37 young patients (<40 years) and 28 old patients (>50 years) and determined the correlation of DNA ploidy findings with clinicopathological data.Methods and results: Image cytometry was carried out using an automated cellular imaging system on Feulgen-stained histological sections to obtain high-fidelity DNA histograms. Among young patients, 37.8% were females compared to 18.7% in the older group (P = 0.002). In total, 48.6% patients were non-smokers and 40.5% were non-drinkers compared to 10.7% non-smokers and non-drinkers in the older group (P < 0.0001). TNM, clinical stage of disease and histological grade of differentiation did not differ between groups. Tumour aneuploidy was detected in 86.5% and tetraploidy in 24.3% young patients; this was significantly greater than in the older group where 64.3% were aneuploid (P < 0.0001) and 7.2% tetraploid (P < 0.0001). The mean values of DNA index (DI) and DNA heterogeneity index as well as the percentage of cells with DI exceeding 5N were higher in young patients (P < 0.0001).Conclusions: Young patients with TSCC represent a distinct clinical entity. The high incidence of DNA ploidy abnormalities suggest that they may have increased genomic instability and indicates underlying genetic differences between TSCC in young and older patients.

EFFECT of DIFFERENT AIRBORNE-PARTICLE ABRASION/BONDING AGENT COMBINATIONS on THE BOND STRENGTH of A RESIN CEMENT TO A BASE METAL ALLOY

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The floral nectary of Hymenaea stigonocarpa (Fabaceae, caesalpinioideae): Structural aspects during floral development

Background and Aims Considering that few studies on nectary anatomy and ultrastructure are available for chiropterophilous flowers and the importance of Hymenaea stigonocarpa in natural 'cerrado' communities, the present study sought to analyse the structure and cellular modifications that take place within its nectaries during the different stages of floral development, with special emphasis on plastid dynamics.Methods For the structural and ultrastructural studies the nectary was processed as per usual techniques and studied under light, scanning and transmission electron microscopy. Histochemical tests were employed to identify the main metabolites on nectary tissue and secretion samples.Key Results The floral nectary consists of the inner epidermis of the hypanthium and vascularized parenchyma. Some evidence indicates that the nectar release occurs via the stomata. The high populations of mitochondria, and their juxtaposition with amyloplasts, seem to be related to energy needs for starch hydrolysis. Among the alterations observed during the secretory phase, the reduction in the plastid stromatic density and starch grain size are highlighted. When the secretory stage begins, the plastid envelope disappears and a new membrane is formed, enclosing this region and giving rise to new vacuoles. After the secretory stage, cellular structures named 'extrastomatic bodies' were observed and seem to be related to the nectar resorption.Conclusions Starch hydrolysis contributes to nectar formation, in addition to the photosynthates derived directly from the phloem. In these nectaries, the secretion is an energy-requiring process. During the secretion stage, some plastids show starch grain hydrolysis and membrane rupture, and it was observed that the region previously occupied by this organelle continued to be reasonably well defined, and gave rise to new vacuoles. The extrastomatic bodies appear to be related to the resorption of uncollected nectar.

Marine anomurans (Decapoda) from the non-consolidated sublittoral bottom at the southeastern coast of Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphometric analysis of the venom gland in worker bees of Apis mellifera (Hymenoptera : Apidae) from the pantanal region of Mato Grosso do Sul

In Apis mellifera the acid or venom gland is composed of secretory cells that surround a channel that opens into a reservoir devoid of musculature. This gland can at times present apical branching. In this study we recorded the frequency of branched venom glands in workers of Africanized bees (Apis mellifera Linnaeus) from six localities in the Pantanal region of Mato Grosso do Sul, and analyzed the relation among the length of the main duct, the length of the duct from the reservoir to the beginning of branching, the length of the branched segment (when present) and the total length of the gland. We sought to determine the probable genotypes of the bees from each population by using the model proposed by Alves-Junior. The frequency of branched glands varied from 50% to 83% in the worker bees coming from those places, indicating that this characteristic is primitive in these bees. The results of the Analysis of Discriminant Functions indicated significant differences in the morphometrical segments of the venom gland (Wilk's Lambda = 0.065; F-(27,F-30) = 4.507; P < 0.001), and permitted a differentiation of the populations studied. The genotypes inferred for the bees of each locality agree with the results obtained in the Analysis of Discriminant Functions and form three distinct groups, with some overlapping areas among them. In all of the populations considered the phenotype largevenom gland was predominant. It is inferred that bees with this phenotype (venom gland larger than S. 15 mm) have Gm(1) Gm(1) genotype, being therefore homozygotes for the major alleles and also for the modifier genes that codify this morphological trait. The high frequency of worker bees with large venom gland in all the places considered makes viable the development of a selection program in order to obtain bees with longer venom glands, aimed at the commercial production of venom by the beekeepers of the Pantanal region of Mato Grosso do Sul.

Complex meiotic configuration of the holocentric chromosomes: the intriguing case of the scorpion Tityus bahiensis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

High Prevalence of bla(CTX-M) Extended Spectrum Beta-Lactamase Genes in Klebsiella pneumoniae Isolates from a Tertiary Care Hospital: First report of bla(SHV-12), bla(SHV-31), bla(SHV-38), and bla(CTX-M-15) in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)