Technological-forecasting and research inputs in area of birth-control technology

Technological forecasting, defined as quantified probabilistic prediction of timings and degree of change in the technological parameters, capabilities desirability or needs at different times in the future, is applied to birth control technology (BCT) as a means of revealing the paths of most promising research through identifying the necessary points for breakthroughs. The present status of BCT in the areas of pills and the IUD, male contraceptives, immumological approaches, post-coital pills, abortion, sterilization, luteolytic agents, laser technologies, and control of the sex of the child, are each summarized and evaluated in turn. Fine mapping is done to identify the most potentially promising areas of BCT. These include efforts to make oral contraception easier, improvement of the design of the IUD, clinical evaluation of the male contraceptive danazol, the effecting of biochemical changes in the seminal fluid, and researching of immunological approaches and the effects of other new drugs such as prostaglandins. The areas that require immediate and large research inputs are oral contraception and the IUD. On the basis of population and technological forecasts, it is deduced that research efforts could most effectively aid countries like India through the immediate production of an oral contraceptive pill or IUD with long-lasting effects. Development of a pill for males or an immunization against pre gnancy would also have a significant impact. However, the major impediment to birth control programs to date is attitudes, which must be changed through education.

On trade-off solution pairs in a special type of transportation problem

Abstract is not available.

Essays on Labor Market Frictions, Technological Change and Macroeconomic Fluctuations

The dissertation consists of an introductory chapter and three essays that apply search-matching theory to study the interaction of labor market frictions, technological change and macroeconomic fluctuations. The first essay studies the impact of capital-embodied growth on equilibrium unemployment by extending a vintage capital/search model to incorporate vintage human capital. In addition to the capital obsolescence (or creative destruction) effect that tends to raise unemployment, vintage human capital introduces a skill obsolescence effect of faster growth that has the opposite sign. Faster skill obsolescence reduces the value of unemployment, hence wages and leads to more job creation and less job destruction, unambiguously reducing unemployment. The second essay studies the effect of skill biased technological change on skill mismatch and the allocation of workers and firms in the labor market. By allowing workers to invest in education, we extend a matching model with two-sided heterogeneity to incorporate an endogenous distribution of high and low skill workers. We consider various possibilities for the cost of acquiring skills and show that while unemployment increases in most scenarios, the effect on the distribution of vacancy and worker types varies according to the structure of skill costs. When the model is extended to incorporate endogenous labor market participation, we show that the unemployment rate becomes less informative of the state of the labor market as the participation margin absorbs employment effects. The third essay studies the effects of labor taxes on equilibrium labor market outcomes and macroeconomic dynamics in a New Keynesian model with matching frictions. Three policy instruments are considered: a marginal tax and a tax subsidy to produce tax progression schemes, and a replacement ratio to account for variability in outside options. In equilibrium, the marginal tax rate and replacement ratio dampen economic activity whereas tax subsidies boost the economy. The marginal tax rate and replacement ratio amplify shock responses whereas employment subsidies weaken them. The tax instruments affect the degree to which the wage absorbs shocks. We show that increasing tax progression when taxation is initially progressive is harmful for steady state employment and output, and amplifies the sensitivity of macroeconomic variables to shocks. When taxation is initially proportional, increasing progression is beneficial for output and employment and dampens shock responses.

The Newcastle solution: A realist perspective

This intervention was a multi-component program where a number of different strategies were implemented simultaneously: • Reduced trading hours; • ‘Lockouts’; • Restrictions on the strength of alcohol after certain times; • Managerial changes to the operation of the licensed premises

Finite field computation technique for exact solution of systems of linear equations and interval linear programming problems

An error-free computational approach is employed for finding the integer solution to a system of linear equations, using finite-field arithmetic. This approach is also extended to find the optimum solution for linear inequalities such as those arising in interval linear programming probloms.

Application of Laplace transform technique to the solution of certain third-order non-linear systems

A number of papers have appeared on the application of operational methods and in particular the Laplace transform to problems concerning non-linear systems of one kind or other. This, however, has met with only partial success in solving a class of non-linear problems as each approach has some limitations and drawbacks. In this study the approach of Baycura has been extended to certain third-order non-linear systems subjected to non-periodic excitations, as this approximate method combines the advantages of engineering accuracy with ease of application to such problems. Under non-periodic excitations the method provides a procedure for estimating quickly the maximum response amplitude, which is important from the point of view of a designer. Limitations of such a procedure are brought out and the method is illustrated by an example taken from a physical situation.

Dilute solution properties of methyl methacrylate�acrylonitrile copolymer (MA1)

This paper deals with studies on the dilute solution properties of methyl methacrylate�acrylonitrile copolymer of 0.289 mole fraction (mf) of acrylonitrile composition. Mark�Houwink parameters for this copolymer have been evaluated in acetonitrile (MeCN), 2-butanone (MEK), dimethylformamide (DMF) and γ-butyrolactone (γ-BL). The solvent power is found to be in the order of MEK < MeCN < DMF < γ-BL at 30°C. Herein, probably for the first time, the steric factor for the copolymer is found to be lower than that for the parent homopolymers and the excess interaction parameter, �AB is found to be negative. This probably suggests that the units are compatible to each other.

Effects of glycerol on enzymatic hydrolysis and ethanol production using sugarcane bagasse pretreated by acidified glycerol solution

In this study, for the first time the effects of glycerol on enzymatic hydrolysis and ethanol fermentation were investigated. Enzymatic hydrolysis was inhibited slightly with 2.0 wt% glycerol, leading to reduction in glucan digestibility from 84.9% without glycerol to 82.9% (72 h). With 5.0 wt% and 10.0 wt% glycerol, glucan digestibility reduced by 4.5% and11.0%, respectively. However, glycerol appeared not detrimental to cellulase enzymes. Ethanol fermentation was not affected with glycerol up to 5.0 wt%, and was inhibited slightly with 10.0 wt% glycerol, which resulted in reduction in ethanol yield from 86.0% without glycerol to 83.7% (20 h). Based on laboratory and pilot scale enzymatic hydrolysis and ethanol production results, it was estimated that 0.142 kg ethanol could be produced from 1.0 kg dry bagasse (a glucan content of 38.0%) after pretreatment with acidified glycerol solution.

Dressing up Tinderella: Interrogating authenticity claims on the mobile dating app Tinder

Mobile dating applications (‘apps’) have increased in popularity over recent years, with Tinder among the first to break into the mainstream heterosexual market. Since mobile dating intensifies the need to confirm that potential dates are not misrepresenting themselves and are safe to meet in person, Tinder’s success indicates that it has allayed these concerns regarding the authenticity of its users. This article combines Giddens’ conceptualization of authenticity, as the ability to reference a coherent biographical narrative, with Callon’s sociology of translation to investigate Tinder’s framing of authenticity within mobile dating. Applying a walkthrough method that interrogates Tinder’s technological architecture, promotional materials, and related media, this hybrid theoretical framework is used to identify how Tinder configures an actor-network that establishes its app as the solution to users’ concerns, enrols individuals in using its features in authenticity claims, and popularizes Tinder’s framing across public discourse. This network of human and non-human actors frames authenticity as being established through one’s Facebook profile and adherence to normative standards relating to age, gender, ethnicity, and socioeconomic status. However, user discourses on other social media identify and challenge negative outcomes of this framing, with normativity fostering discrimination and Facebook verification failing to prevent abusive behavior. This case study of Tinder paves the way for future investigation into user responses to its framing. Further, it demonstrates the efficacy and broader applicability of this theoretical approach for identifying both human and technological influences on the construction of authenticity with digital media.

Synthesis, structural and ferromagnetic properties of La1-xKxMnO3 (0.0 <= x <= 0.25) phases by solution combustion method

We describe the solution combustion synthesis and characterization of La1-xKxMnO3 (0.0 <= x <= 0.25) perovskite phases, which is a low temperature initiated, rapid route to prepare metal oxides. As-synthesized compounds are amorphous in nature; crystallinity was observed on heating at 800 degrees C for 5 min. Structural parameters were determined by the Rietveld refinement method using powder XRD data. Parent LaMnO3 compound crystallizes in the orthorhombic structure (space group Pbnm, No. 62). Potassium substituted compounds were crystallized with rhombohedral symmetry (space group R-3c, No. 167). The ratio of the Mn3+/Mn4+ was determined by the iodometric titration. The Fourier transform infrared spectrum (FTIR) shows two absorption bands for Mn-O stretching vibration (v, mode), Mn-O-Mn deformation vibration (v(b) mode) around 600 cm(-1) and 400 cm(-1) for the compositions, x = 0.0, 0.05 and 0-10. Four-probe electrical resistivity measurements reveal a composition controlled metal to insulator transition (TM-1), the maximum TM-1 was observed for the composition La0.85K0.15MnO3 at 287 K. Room temperature vibrating sample magnetometer data indicate that for the composition up to x = 0-10, the compounds are paramagnetic whereas composition with x = 0.15, 0.20 and 0.25 show magnetic moments of 27, 29 and 30 emu/g, respectively.

Solution NMR studies of acetohydroxy acid synthase I: Identification of the sites of inter-subunit interactions using multidimensional NMR methods

The novel multidomain organization in the multimeric Escherichia coli AHAS I (ilvBN) enzyme has been dissected to generate polypeptide fragments. These fragments when cloned, expressed and purified reassemble in the presence of cofactors to yield a catalytically competent enzyme. Structural characterization of AHAS has been impeded due to the fact that the holoenzyme is prone to dissociation leading to heterogeneity in samples. Our approach has enabled the structural characterization using high-resolution nuclear magnetic resonance methods. Near complete sequence specific NMR assignments for backbone H-N, N-15, C-13 alpha and C-13(beta) atoms of the FAD binding domain of ilvB have been obtained on samples isotopically enriched in H-2, C-13 and N-15. The secondary structure determined on the basis of observed C-13(alpha) secondary chemical shifts and sequential NOEs indicates that the secondary structure of the FAD binding domain of E. coli AHAS large Subunit (ilvB) is similar to the structure of this domain in the catalytic subunit of yeast AHAS. Protein-protein interactions involving the regulatory subunit (ilvN) and the domains of the catalytic subunit (ilvB) were studied using circular dichroic and isotope edited solution nuclear magnetic resonance spectroscopic methods. Observed changes in circular dichroic spectra indicate that the regulatory subunit (ilvN) interacts with ilvB alpha and ilvB beta domains of the catalytic subunit and not with the ilvB gamma domain. NMR chemical shift mapping methods show that ilvN binds close to the FAD binding site in ilvB beta and proximal to the intrasubunit ilvB alpha/ilvB beta domain interface. The implication of this interaction on the role of the regulatory subunit oil the activity of the holoenzyme is discussed. NMR studies of the regulatory domains show that these domains are structured in solution. Preliminary evidence for the interaction of ilvN with the metabolic end product of the pathway, viz., valine is also presented.

Coupled Solution for Forced Recharge in Confined Aquifers

Analytical solutions for forced well recharge currently in use were initially developed for pumping scenarios and applied for recharge cases assuming that radial flow in the recharge well replicates a mirror image of that in to a pumping well. Moreover these solutions were not extended to multiaquifer systems. Well bore numerical solutions were generally not considering the effect of well bore interaction, which has a significant effect in the case of a recharge well. In the present paper, improved analytical solutions are developed for a well fully penetrating either single or multiaquifers in respect.to of well storage, well loss, and interactions between the individual aquifers through well bore. The solution developed for constant and variable rates of injection and well loss is applied to the experimental data of the Hansol well injection project near the city of Ahmedabad in the Gujarat state in India. The paper also discusses the difference in well hydraulics of recharge and recovery wells.