939 resultados para Soma Parcial


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The association of mandibular distal extension removable partial dentures with an osteointegrated implant is a treatment option at hasn't been fully explored by modern rehabilitation dentistry yet. The objective of this study is to evaluate, by means of the bidimensional method of finite elements, the distribution of tension on the structures supporting the distal extension removable partial denture (DERPD), associated to a 10.0 x 3.75 mm osteointegrated implant with an ERA retention system, in alveolar ridges of different shapes. Eight models were created, representing, from a sagittal perspective: Model A (MA) – a half arch with a horizontal ridge without posterior support, with the presence of the lower left canine, and a conventional DERPD, with metallic support in the incisal aspect of this canine, as replacement for the first and second pre-molars and the first and second molars of the lower left half arch; Model B (MB) – similar to MA, but different because of the presence of a 3.75 x 10.00 mm implant with an associated ERA retention system in the posterior region of the DERPD base; Model C (MC) - similar to MA, however with a distally ascending ridge format; Model D (MD) – similar to MC, but different because there is an implant associated to a retention system; Model E (ME) - similar to MA, however with a distally descending ridge format; Model F (MF) – similar to ME, but ditfferent in the sense that there is an implant with an associated ERA retention system; Model G (MG) – similar to MA, however with a distally descending-ascending ridge format; Model H (MH) – similar to MG, but different in the sense that there is an implant with an associated ERA retention system. The finite element program ANSYS 9.0 was used to load the models with vertical forces of 50 N, on each cuspid tip. The format of distal descending edge (ME and MF) was that presented worse results, so in the models with conventional RPD as in the models with RPD associated to the implant and ERA system of retention, for the structures gingival mucosa and tooth support. 1) the distally descending ridge presented the most significant stress in the model with the conventional RPD (ME) or with a prosthesis associated to an implant (MF) and 2) the horizontal ridge (MB) provided more relief to the support structures, such as the tooth and the spongy bone, when there was an implant associated to an ERA retention system. The incorporation of the implants with the ERA system retention, in the posterior area of the toothless edge, it promotes larger stability and retention to PPREL, improving the patient's masticatory acting and, consequently, its comfort and function.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O tema proposto para o 18º COLE é intrigante: “O mundo grita. Escuta?” Vale-se de uma afirmação e de uma interrogação com verbos de conotações diversas, num entrelace quiasmático da linguagem. Enfocando esta proposição, nosso objetivo é examinar conotações e atos de linguagem que perpassam o referido tema. Para tanto, utilizaremos como corpus a tela: “O grito”, de Munch; um capítulo de “Memórias póstumas de Brás Cubas”, de Machado de Assis; a crônica “Diálogo de todo dia”; de Carlos Drummond de Andrade; a música: “Sinal fechado”, de Paulinho da Viola; e cinco aulas do escritor argentino Jorge Luis Borges, in: “Borges oral & sete noites”, destacando que, apesar de o mundo pretender comunicar-se, o que resta é uma dúvida quanto à consecução de seu escopo. Os textos focados vão para a oralidade: pela representação iconográfica do grito, em Munch; pelo diálogo tipográfico, em Machado; pela conversa psitacista, em Drummond; pela conversa de tempo marcado, em Paulinho da Viola; e pela força da oralidade de um escritor cego, Nobel de Literatura. Várias linguagens representam o grito do mundo e outras escutam. Representações das artes plásticas e literárias fazem-nos refletir sobre a recusa de escutarmos os gritos de cada indivíduo, em solilóquios que se somam, mas continuam sendo, apenas, ouvidos, sem resposta concreta, pois, frequentemente, as redes sociais tomam lugar da oralidade. Embora haja diálogos, o grito individual está dentro do grito do mundo e o escutar resulta de um ato perlocutivo, impondo ao enunciatário uma resposta, uma ação.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The main disturbs affecting the genital segment of bulls are balanitis, phimosis and preputial injuries, abscesses or prolapses, resulting in decreased libido or mating ability. One case of traumatic phimosis with partial obliteration of preputial lumen is reported in Aberdeen Angus bull. During anamnesis, it was reported that the animal was unable to expose the penis and presented increased penile and preputial volume of unknown etiology after being submitted to a libido test. During clinical examination, a firm preputial mass of 15 cm in diameter was observed in the middle third of the prepuce and stenosis of preputial lumen was detected approximately 17 cm from the preputial orifice. Reconstructive surgery was the chosen therapy, with amputation of the affected foreskin portion. A skin segment of about 12 cm and affected mucosal portion were removed. Postoperative therapy consisted of dressing with chlorhexidine digluconate based ointment, povidone iodine and topical insect repellent (cypermethrin and carbamyl), systemic antibiotic therapy with benzathine penicillin (30,000 IU / kg, repeated after 48 hours) and anti-inflammatory therapy with flunixin meglumine (2 , 0 mg / kg SID) for three days. After twenty days, semen was collected by massage of the accessory glands. The ejaculate volume was 3 mL, with 200x106 spermatozoa / mL, white color, "suis generis" odor, 88% of motile sperm, 64% of progressively motile sperm and 82% of rapid sperm. Thus, the chosen surgical treatment was effective to correct the pathology and reintroduce the animal into reproductive activity

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to evaluate the behavior of reinforced composites with polyamide 6 fibers aligned (6000 rpm) and alignment (120 rpm) with or without CNT using the flexural strength test. After preparation of nanofibers aligned nylon 6 (6000 rpm) and alignment (120 rpm) with and without incorporation of nanotube carbon by the method of electrospinning, were performed one control group (n = 10) and 4 experimental groups (n = 40) G1: Control (just resin Charisma - Heraeus Kulzer) ;G2 Resin + N6 aligned (6000 rpm) + CNT; G3:Resin + N6 alignment (120 rpm) + CNT; G4: Resin + aligned ( 6000 rpm) N6. G5: Resin + N6 alignment (120 rpm). The fibers were cut to the dimensions of 0,3 x 15 mm and were applied an adhesive at the surface (Single Bond 2) for 5 min and cured. In the matrix, was added resin in the proximal box (Charisma A2, Heraeus Kulzer) and cured for 40 s. (power 1100 mW / cm²). A first layer of resin and on the resin was deposited. The resin layers specimens were light irradiated with three overlapping exposures delivered. For each resin layer were light irradiated for 40 sec. The samples were tested with a cross-speed of 1 mm / min, and a 50 Kgf at Universal testing machine (EMIC mod.DL2000). The Dunnet test showed that only the nanotube group was significantly different from the control group. The ANOVA two-way indicates that the nanotube factor was statistically significant (p < 0.05) and there is no interaction between factors and orientation nanotube. The presence of nanotube showed lower fracture resistance values for aligned and unaligned groups. The results of this study showed that the orientation of the fibers does not influence the strength of composite resins and the incorporation of nylon nanofibers with carbon nanotubes decreased the fracture resistance values. The presence of the fibers has not been able to improve the strength of the material in any of the...

Relevância:

20.00% 20.00%

Publicador:

Resumo:

As xilanases são enzimas que hidrolisam as ligações 1,4-β-xilosídicas da xilana e que possuem potencial biotecnológico em vários processos industriais, como na clarificação de sucos e vinhos, na fabricação de pães, na produção de biocombustíveis e no tratamento das polpas celulósicas. Além disso, os produtos de hidrólise da xilana, xilooligossacarídeos, podem ser utilizados como ingredientes prebióticos, ou seja, ingredientes nutricionais não digeríveis que estimulam seletivamente a proliferação e a atividade de bactérias benéficas do cólon. O uso de enzimas microbianas nas indústrias se dá devido às suas diversas vantagens sobre os métodos químicos e à facilidade de obtenção do microrganismo. Assim, os objetivos deste trabalho foram: produzir e caracterizar parcialmente a xilanase de Aspergillus sp isolado de pó de café utilizado, purificar parcialmente a enzima produzida e analisar os produtos de hidrólise da xilana. O Aspergillus sp mostrou-se bom produtor de xilanase quando o pó de sabugo de milho foi utilizado como fonte de carbono e a xilanase produzida apresentou melhor atividade específica quando o período de cultivo foi de 168 horas. Os processos de precipitação de proteínas e diálise promoveram o aumento da atividade específica do extrato. A xilanase de Aspergillus sp apresentou pH e temperatura de máxima atividade semelhantes aos de produzidas por Aspergillus niger isolados de outras fontes. A hidrólise da xilana produziu xilose e xilooligossacarídeos. Além da xilanase, o fungo revelou ser produtor de outras proteínas que podem ser estudadas em pesquisas futuras.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to evaluate the behavior of reinforced composites with polyamide 6 fibers aligned (6000 rpm) and alignment (120 rpm) with or without CNT using the flexural strength test. After preparation of nanofibers aligned nylon 6 (6000 rpm) and alignment (120 rpm) with and without incorporation of nanotube carbon by the method of electrospinning, were performed one control group (n = 10) and 4 experimental groups (n = 40) G1: Control (just resin Charisma - Heraeus Kulzer) ;G2 Resin + N6 aligned (6000 rpm) + CNT; G3:Resin + N6 alignment (120 rpm) + CNT; G4: Resin + aligned ( 6000 rpm) N6. G5: Resin + N6 alignment (120 rpm). The fibers were cut to the dimensions of 0,3 x 15 mm and were applied an adhesive at the surface (Single Bond 2) for 5 min and cured. In the matrix, was added resin in the proximal box (Charisma A2, Heraeus Kulzer) and cured for 40 s. (power 1100 mW / cm²). A first layer of resin and on the resin was deposited. The resin layers specimens were light irradiated with three overlapping exposures delivered. For each resin layer were light irradiated for 40 sec. The samples were tested with a cross-speed of 1 mm / min, and a 50 Kgf at Universal testing machine (EMIC mod.DL2000). The Dunnet test showed that only the nanotube group was significantly different from the control group. The ANOVA two-way indicates that the nanotube factor was statistically significant (p < 0.05) and there is no interaction between factors and orientation nanotube. The presence of nanotube showed lower fracture resistance values for aligned and unaligned groups. The results of this study showed that the orientation of the fibers does not influence the strength of composite resins and the incorporation of nylon nanofibers with carbon nanotubes decreased the fracture resistance values. The presence of the fibers has not been able to improve the strength of the material in any of the...

Relevância:

20.00% 20.00%

Publicador:

Resumo:

As xilanases são enzimas que hidrolisam as ligações 1,4-β-xilosídicas da xilana e que possuem potencial biotecnológico em vários processos industriais, como na clarificação de sucos e vinhos, na fabricação de pães, na produção de biocombustíveis e no tratamento das polpas celulósicas. Além disso, os produtos de hidrólise da xilana, xilooligossacarídeos, podem ser utilizados como ingredientes prebióticos, ou seja, ingredientes nutricionais não digeríveis que estimulam seletivamente a proliferação e a atividade de bactérias benéficas do cólon. O uso de enzimas microbianas nas indústrias se dá devido às suas diversas vantagens sobre os métodos químicos e à facilidade de obtenção do microrganismo. Assim, os objetivos deste trabalho foram: produzir e caracterizar parcialmente a xilanase de Aspergillus sp isolado de pó de café utilizado, purificar parcialmente a enzima produzida e analisar os produtos de hidrólise da xilana. O Aspergillus sp mostrou-se bom produtor de xilanase quando o pó de sabugo de milho foi utilizado como fonte de carbono e a xilanase produzida apresentou melhor atividade específica quando o período de cultivo foi de 168 horas. Os processos de precipitação de proteínas e diálise promoveram o aumento da atividade específica do extrato. A xilanase de Aspergillus sp apresentou pH e temperatura de máxima atividade semelhantes aos de produzidas por Aspergillus niger isolados de outras fontes. A hidrólise da xilana produziu xilose e xilooligossacarídeos. Além da xilanase, o fungo revelou ser produtor de outras proteínas que podem ser estudadas em pesquisas futuras.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

OBJETIVO: Avaliação dos resultados da utilização de enxerto de espessura parcial de esclera autóloga para o tratamento das úlceras esclerais profundas, como complicação tardia da exérese de pterígio associada à betaterapia. MÉTODOS: Foram tratados doze olhos de doze pacientes, nove femininos e três masculinos, com idade variando entre 48 e 82 anos, média 65,2 anos. RESULTADOS: Houve boa integração do enxerto em todos os casos, com resultado funcional e cosmético favorável e sem complicações. CONCLUSÃO: Várias técnicas de enxertia tem sido propostas para o tratamento da úlcera escleral: esclera e dura-máter homólogas, derme, cartilagem auricular e periósteo autólogos. No entanto, o procedimento com esclera autóloga apresenta reais vantagens em relaçâo aos enxertos empregados anteriormente. Não há referências na literatura quanto ao emprego de enxerto de esclera autóloga de espessura parcial para o tratamento da úlcera escleral.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

OBJETIVO: Descrever um modelo experimental de lesão de isquemia/reperfusão hepática com manifestações sistêmicas, representadas pelo envolvimento pulmonar, que possa ser utilizado por aqueles que pretendem compreender esse fenômeno. MÉTODOS: Ratos Wistar machos (200-250g) foram usados. Quatorze foram alocados em dois grupos, sendo G1 com oito submetidos somente à laparotomia e G2, seis à isquemia e reperfusão hepática. As funções hepática (aminotransferases séricas, respiração mitocondrial, histologia) e pulmonar (teste do azul de Evans) foram analisadas. RESULTADOS: houve diferença estatística significativa entre G1 e G2 ao se comparar valores de AST (24,3 ± 108 e 5406 ± 2263), ALT (88,5 ± 28,5 e 5169 ± 2690), razão de controle respiratório (3,41 ± 0,17 e 1,91 ± 0,55) e relação ADP/O (1,93 ± 0,03 e 1,45 ± 0,27), lesões histológicas (necrose, células inflamatórias, hemorragia, microesteatose) e teste do azul de Evans (194,31 ± 53 e 491,8 ± 141). CONCLUSÃO: O modelo mostrou-se útil para o estudo de lesão de isquemia/reperfusão hepática.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Ca(2+)-binding proteins parvalbumin (PV) and calbindin D-28k (CB) are key players in the intracellular Ca(2+)-buffering in specific cells including neurons and have profound effects on spatiotemporal aspects of Ca(2+) transients. The previously observed increase in mitochondrial volume density in fast-twitch muscle of PV-/- mice is viewed as a specific compensation mechanism to maintain Ca(2+) homeostasis. Since cerebellar Purkinje cells (PC) are characterized by high expression levels of the Ca(2+) buffers PV and CB, the question was raised, whether homeostatic mechanisms are induced in PC lacking these buffers. Mitochondrial volume density, i.e. relative mitochondrial mass was increased by 40% in the soma of PV-/- PC. Upregulation of mitochondrial volume density was not homogenous throughout the soma, but was selectively restricted to a peripheral region of 1.5 microm width underneath the plasma membrane. Accompanied was a decreased surface of subplasmalemmal smooth endoplasmic reticulum (sPL-sER) in a shell of 0.5 microm thickness underneath the plasma membrane. These alterations were specific for the absence of the "slow-onset" buffer PV, since in CB-/- mice neither changes in peripheral mitochondria nor in sPL-sER were observed. This implicates that the morphological alterations are aimed to specifically substitute the function of the slow buffer PV. We propose a novel concept that homeostatic mechanisms of components involved in Ca(2+) homeostasis do not always occur at the level of similar or closely related molecules. Rather the cell attempts to restore spatiotemporal aspects of Ca(2+) signals prevailing in the undisturbed (wildtype) situation by subtly fine tuning existing components involved in the regulation of Ca(2+) fluxes.