Study of flow behaviour in a three-product cyclone using computational fluid dynamics

Simplicity in design and minimal floor space requirements render the hydrocyclone the preferred classifier in mineral processing plants. Empirical models have been developed for design and process optimisation but due to the complexity of the flow behaviour in the hydrocyclone these do not provide information on the internal separation mechanisms. To study the interaction of design variables, the flow behaviour needs to be considered, especially when modelling the new three-product cyclone. Computational fluid dynamics (CFD) was used to model the three-product cyclone, in particular the influence of the dual vortex finder arrangement on flow behaviour. From experimental work performed on the UG2 platinum ore, significant differences in the classification performance of the three-product cyclone were noticed with variations in the inner vortex finder length. Because of this simulations were performed for a range of inner vortex finder lengths. Simulations were also conducted on a conventional hydrocyclone of the same size to enable a direct comparison of the flow behaviour between the two cyclone designs. Significantly, high velocities were observed for the three-product cyclone with an inner vortex finder extended deep into the conical section of the cyclone. CFD studies revealed that in the three-product cyclone, a cylindrical shaped air-core is observed similar to conventional hydrocyclones. A constant diameter air-core was observed throughout the inner vortex finder length, while no air-core was present in the annulus. (c) 2006 Elsevier Ltd. All rights reserved.

The human papillomavirus type 16 E7 protein binds human interferon regulatory factor-9 via a novel PEST domain required for transformation

It is critical that viruses are able to avoid the antiviral activities of interferon (IFN). We have shown previously that the human papillomavirus (HPV) is able to avoid IFN-alpha via interaction of the HPV-16 E7 protein with IFN regulatory factor-9 (IRF-9). Here, we investigated the details of the interaction using HPV-16 E7 peptide mapping to show that IRF-9 binds HPV-16 E7 in a domain encompassing amino acids 25-36. A closer examination of this region indicates this is a novel proline, glutamate, serine, and threonine-rich (PEST) domain, with a PEST score of 8.74. We have also mapped the region of interaction within IRF-9 and found that amino acids 354-393 play an important role in binding to HPV-16 E7. This region of IRF-9 encompasses the IRF association domain (IAD), a region important for protein-protein interaction central to IRF function. Finally, we used alanine-scanning mutagenesis to determine if E7-IRF-9 interaction was important for E7-mediated cellular transformation and found that the HPV-16 E7 mutants Y25A, E26A, S31A, S32A, and E35A, but not L28A and N29A, caused loss of transformation ability. Preliminary data suggest loss of IRF-9 interaction with E7 mutants correlated with transformation. Our work suggests E7- IRF- 9 interaction is important for the transforming ability of HPV-16 E7 and that HPV-16 E7 may interact with other IRF proteins that have IAD domains.

Conservation and accessibility of an inner core lipopolysaccharide epitope of Neisseria meningitidis

We investigated the conservation and antibody accessibility of inner core epitopes of Neisseria meningitidis lipopolysaccharide (LPS) because of their potential as vaccine candidates. An immunoglobulin G3 murine monoclonal antibody (MAb), designated MAb B5, was obtained by immunizing mice with a galE mutant of N. meningitidis H44/76 (B.15.P1.7,16 immunotype L3). We have shown that MAb B5 can bind to the core LPS of wild-type encapsulated MC58 (B.15.P1.7,16 immunotype L3) organisms in vitro and ex vivo. An inner core structure recognized by MAb B5 is conserved and accessible in 26 of 34 (76%) of group B and 78 of 112 (70%) of groups A, C, W, X, Y, and Z strains. N. meningitidis strains which possess this epitope are immunotypes in which phosphoethanolamine (PEtn) is linked to the 3-position of the beta-chain heptose (HepII) of the inner core. In contrast, N. neningitidis strains lacking reactivity with MAb B5 have an alternative core structure in which PEtn is linked to an exocyclic position (i.e., position 6 or 7) of HepII (immunotypes L2, L4, and L6) or is absent (immunotype L5). We conclude that MAb B5 defines one or more of the major inner core glycoforms of N. meningitidis LPS. These findings support the possibility that immunogens capable of eliciting functional antibodies specific to inner core structures could be the basis of a vaccine against invasive infections caused by N. meningitidis.

Further evidence of linkage at 7p22 with familial hyperaldosteronism type II and exclusion of genetic defects in the RBAK coding regions

Once thought rare, primary aldosteronism (PAL) is now reported to be responsible for 5–10% of hypertension. Unlike familial hyperaldosteronism type I (FH-I), FH-II is not glucocorticoidremediable and not associated with the hybrid CYP11B1/CYP11B2 gene mutation. At least five times more common than FH-I, FH-II is clinically indistinguishable from apparently sporadic PAL, suggesting an even higher incidence. Studies performed in collaboration with C Stratakis (NIH, Bethesda) on our largest Australian family (eight affected members) demonstrated linkage at chromosome 7p22. Linkage at this region was also found in a South American family (DNA provided by MI New, Mount Sinai School of Medicine, New York) and in a second Australian family. The combined multipoint LOD score for these 3 families is 4.61 (q = 0) with markers D7S462 and D7S517, providing strong support for this locus harbouring mutations responsible for FH-II. A newly identified recombination event in our largest Australian family has narrowed the region of linkage by 1.8 Mb, permitting exclusion of approximately half the genes residing in the originally reported 5 Mb linked locus. Candidate genes that are involved in cell cycle control are of interest as adrenal hyperplasia and adrenal adenomas are common in FH-II patients. A novel candidate gene in this linked region produces the retinoblastoma-associated Kruppel-associated box protein (RBaK) which interacts with the retinoblastoma gene product to repress the expression of genes activated by members of the E2F family of transcription factors.

A study of new product market search and user adoption

The research was carried out in the Aviation Division of Dunlop Limited and was initiated as a search for more diverse uses for carbon/carbon composites. An assumed communication model of adoption was refined by introducing the concept of a two way search after making cross industry comparisons of supplier and consumer behaviour. This research has examined methods of searching for new uses for advanced technology materials. Two broad approaches were adopted. First, a case history approach investigated materials that had been in a similar oosition to carbon/carbon to see how other material producing firms had tackled the problem. Second, a questionnaire survey among industrialists examined: the role and identity of material decision makers in different sized firms; the effectiveness of various information sources and channels; and the material adoption habits of different industries. The effectiveness of selected information channels was further studied by monitoring the response to publicity given to carbon/carbon. A flow chart has been developed from the results of this research which should help any material producing firm that is contemplating the introduction of a new material to the world market. Further benefit to our understanding of the innovation and adoption of new materials would accrue from work in the followino areas: "micro" type case histories; understanding more fully the role of product champions or promoters; investigating the phase difference between incremental and radical type innovations for materials; examining the relationship between the adoption rate of new materials and the advance of technology; studying the development of cost per unit function methods for material selection; and reviewing the benefits that economy of scale studies can have on material developments. These are all suggested areas for further work.

Product innovation in a medium size mature manufacturing company

This thesis is concerned with the management of product innovation inside the medium size, mature, manufacturing company. An academic perspective of innovation is integrated with an account of direct participation acquired over a two year period. The emergent synthesis provides fresh insight into some of the problems associated with producing and sustaining innovation. Product innovation is a very complex activity, and it presents particular difficulties for mature industry. However, the ability to innovate is fundamental to a company's continued survival. Three aspects of product innovation are examined in detail. Firstly, is the requirement to separate innovation activity from the on-going business interests; dependency between the degree of separation and novelty is supported. Secondly, a simple sequential model of the innovation process is tested and shown to be of considerable practical value. Thirdly a relationship is established between the age of the recipient market and the type of innovation to be found in that market All three aspects are found to have important implications for management in their pursuit of innovation. Management deficiencies which inhibited the successful resolution of innovation-linked problems are described and solutions which stress the need for commitment and coherency are proposed. The long existing management structure in the mature company which mitigates against successful and continuing innovation are examined in detail and a strategy is evolved which uses the intrinsic strengths of the mature company to promote innovation of a kind compatible with success in the market. A set of guidelines of practical value is presented for those managers wishing to pursue, and sustain, product innovation in the medium size mature company.

Comparative risk of microalbuminuria and proteinuria in UK residents of south Asian and white European ethnic background with type 2 diabetes:a report from UKADS

Objective - This study investigated and compared the prevalence of microalbuminuria and overt proteinuria and their determinants in a cohort of UK resident patients of white European or south Asian ethnicity with type 2 diabetes mellitus. Research design and methods - A total of 1978 patients, comprising 1486 of south Asian and 492 of white European ethnicity, in 25 general practices in Coventry and Birmingham inner city areas in England were studied in a cross-sectional study. Demographic and risk factor data were collected and presence of microalbuminuria and overt proteinuria assessed. Main outcome measures - Prevalences of microalbuminuria and overt proteinuria. Results - Urinary albumin:creatinine measurements were available for 1852 (94%) patients. The south Asian group had a lower prevalence of microalbuminuria, 19% vs. 23% and a higher prevalence of overt proteinuria, 8% vs. 3%, X2?=?15.85, 2df, P?=?0.0004. In multiple logistic regression models, adjusted for confounding factors, significantly increased risk for the south Asian vs. white European patients for overt proteinuria was shown; OR (95% CI) 2.17 (1.05, 4.49), P?=?0.0365. For microalbuminuria, an interaction effect for ethnicity and duration of diabetes suggested that risk for south Asian patients was lower in early years following diagnosis; OR for SA vs. WH at durations 0 and 1 year were 0.56 (0.37, 0.86) and 0.59 (0.39, 0.89) respectively. After 20 years’ duration, OR?=?1.40 (0.63, 3.08). Limitations - Comparability of ethnicity defined groups; statistical methods controlled for differences between groups, but residual confounding may remain. Analyses are based on a single measure of albumin:creatinine ratio. Conclusions - There were significant differences between ethnicity groups in risk factor profiles and microalbuminuria and overt proteinuria outcomes. Whilst south Asian patients had no excess risk of microalbuminuria, the risk of overt proteinuria was elevated significantly, which might be explained by faster progression of renal dysfunction in patients of south Asian ethnicity.

Profiling purchasing skills by purchase type : a survey of buyers in Taiwan

This paper presents the results of an empirical study of purchasing skills and how they vary by type of purchase. Building on the purchasing portfolio approach, purchase type was defined using 10 internally oriented, product- related dimensions, and 8 externally oriented, supply-related dimensions. Based on these dimensions, experienced purchasing personnel described a specific purchase and profiled the skills required for effective performance in purchasing that item. Cluster analysis of the 72 valid responses provided three distinct groups of purchasing situations, which were labelled strategic, tactical and routine purchase types. Of the 33 skills identified from prior literature, 24 were found to differ significantly (p>0.05) across purchase type clusters. For each cluster, the purchase situation and skills profile are described. Results show that, as product and market complexity and risk increase, both more purchasing skills are needed, and their importance for successful performance increases. Further analysis through pairwise comparisons of the clusters reveals more detailed insights. Suggestions for refining this survey tool and for its potential application in companies are discussed.

Intermediate pyrolysis and product identification by TGA and Py-GC/MS of green microalgae and their extracted protein and lipid components

The thermo-chemical conversion of green microalgae Chlamydomonas reinhardtii wild type (CCAP 11/32C), its cell wall deficient mutant C. reinhardtii CW15 (CCAP 11/32CW15) and Chlorella vulgaris (CCAP 211/11B) as well as their proteins and lipids was studied under conditions of intermediate pyrolysis. The microalgae were characterised for ultimate and gross chemical composition, lipid composition and extracted products were analysed by Thermogravimetric analysis (TG/DTG) and Pyrolysis-gaschromatography/mass-spectrometry (Py-GC/MS). Proteins accounted for almost 50% and lipids 16-22 % of dry weight of cells with little difference in the lipid compositions between the C. reinhardtii wild type and the cell wall mutant. During TGA analysis, each biomass exhibited three stages of decomposition, namely dehydration, devolatilization and decomposition of carbonaceous solids. Py-GC/MS analysis revealed significant protein derived compounds from all algae including toluene, phenol, 4-methylphenol, 1H-indole, 1H-indole-3methyl. Lipid pyrolysis products derived from C. reinhardtii wild type and C. reinhardtii CW15 were almost identical and reflected the close similarity of the fatty acid profiles of both strains. Major products identified were phytol and phytol derivatives formed from the terpenoid chain of chlorophyll, benzoic acid alkyl ester derivative, benzenedicarboxylic acid alkyl ester derivative and squalene. In addition, octadecanoic acid octyl ester, hexadecanoic acid methyl ester and hydrocarbons including heptadecane, 1-nonadecene and heneicosane were detected from C. vulgaris pyrolysed lipids. These results contrast sharply with the types of pyrolytic products obtained from terrestrial lignocellulosic feedstocks and reveal that intermediate pyrolysis of algal biomass generates a range of useful products with wide ranging applications including bio fuels.

The Aston Medication Adherence Study:mapping the adherence patterns of an inner-city population

Background: The Aston Medication Adherence Study was designed to examine non-adherence to prescribed medicines within an inner-city population using general practice (GP) prescribing data. Objective: To examine non-adherence patterns to prescribed oralmedications within three chronic disease states and to compare differences in adherence levels between various patient groups to assist the routine identification of low adherence amongst patients within the Heart of Birmingham teaching Primary Care Trust (HoBtPCT). Setting: Patients within the area covered by HoBtPCT (England) prescribed medication for dyslipidaemia, type-2 diabetes and hypothyroidism, between 2000 and 2010 inclusively. HoBtPCT's population was disproportionately young,with seventy per cent of residents fromBlack and Minority Ethnic groups. Method: Systematic computational analysis of all medication issue data from 76 GP surgeries dichotomised patients into two groups (adherent and non-adherent) for each pharmacotherapeutic agent within the treatment groups. Dichotomised groupings were further analysed by recorded patient demographics to identify predictors of lower adherence levels. Results were compared to an analysis of a self-reportmeasure of adherence [using the Modified Morisky Scale© (MMAS-8)] and clinical value data (cholesterol values) from GP surgery records. Main outcome: Adherence levels for different patient demographics, for patients within specific longterm treatment groups. Results: Analysis within all three groups showed that for patients with the following characteristics, adherence levels were statistically lower than for others; patients: younger than 60 years of age; whose religion is coded as "Islam"; whose ethnicity is coded as one of the Asian groupings or as "Caribbean", "Other Black" and "African"; whose primary language is coded as "Urdu" or "Bengali"; and whose postcodes indicate that they live within the most socioeconomically deprived areas of HoBtPCT. Statistically significant correlations between adherence status and results from the selfreport measure of adherence and of clinical value data analysis were found. Conclusion: Using data fromGP prescribing systems, a computerised tool to calculate individual adherence levels for oral pharmacotherapy for the treatment of diabetes, dyslipidaemia and hypothyroidism has been developed.The tool has been used to establish nonadherence levels within the three treatment groups and the demographic characteristics indicative of lower adherence levels, which in turn will enable the targeting of interventional support within HoBtPCT. © Koninklijke Nederlandse Maatschappij ter bevordering der Pharmacie 2013.

catena-[μ-tris(1,2-bis(tetrazol-1-yl)ethane-N4,N4')iron(II)] bis(tetrafluoroborate): Synthesis, structure, spectroscopic and magnetic characterisation of a chain-type coordination polymer spin-crossover compound.

In analogy to a common synthesis of 1-substituted 5-H tetrazoles (Tetrahedron Lett. 36 (1995)1759; Beloruss. Gos. Univ., Minsk, USSR. Khim. Geterotsikl. Soedin. 11 (1985) 1521; Beloruss. Gos. Univ., Minsk, USSR. Khim. Geterotsikl. Soedin. 1 (1991) 66; BGU, Belarus. Vestsi Akad. Navuk Belarusi, Ser. Khim. Navuk 1 (1992) 73), the new bidentate ligand 1,2-bis(tetrazol-1-yl)ethane [endi] was synthesized and characterized by X-ray diffraction, NMR, IR and UV–Vis spectroscopy. By using iron(II) tetrafluoroborate hexahydrate the complexation with this ligand yields a 1-dimensional linear coordination polymer similar to the recently published chain compound (Inorg. Chem. 39 (2000) 1891) exhibiting a thermally induced spin-crossover phenomenon. Similar to the 1,2-bis(tetrazol-1-yl)propane-bridged compound, our 1,2-bis(tetrazol-1-yl)ethane-bridged compound shows a gradual spin transition, but the spin-crossover temperature T1/2≈140 K is found to be 10 K above the other T1/2. The T1/2 was determined by temperature-dependent 57Fe-Mössbauer, far FT-IR and UV–Vis spectroscopy as well as by temperature-dependent magnetic susceptibility measurements. Single crystals of the complex were grown in situ from a solution of the ligand and iron(II) tetrafluoroborate. The X-ray structure determinations of both the high spin as well as the low spin state of the compound revealed a solid state structure, which is comparable to that of catena-[Fe(1,2-bis(tetrazole-1-yl)propane)3](ClO4)2 (Inorg. Chem. 39 (2000) 1891; 2nd TMR-TOSS Meeting, 4th Spin Crossover Family Meeting, Lufthansa Training Center, Seeheim/Germany, April 30–May 2, 1999). Both the 1,2-bis(tetrazol-1-yl)propane-bridged and our compound do not show a thermal hysteresis effect (J. Am. Chem. Soc. 115 (1993) 9810; Inorg. Chim. Acta 37 (1979) 169; Chem. Phys. Lett. 93 (1982) 567). The synthesis of the complex described in the experimental section yielded a fine powdered product being poorly soluble in most common solvents. The single crystal measurements were done with crystals obtained by various diffusion methods. Most of them yielded either thin needles or small hexagonal prism crystals depending on the specific conditions.

The influence of organizational and national culture on new product performance

The authors conduct a meta-analysis on the combined influence of organizational and national culture on new product performance. For this purpose, they refer to the effectiveness of value congruency and develop a conceptual model describing the fit between organizational culture types as suggested by the competing values framework and national culture, as described by Hofstede's cultural dimensions. The meta-analysis is based on 489 effect sizes taken from 123 manuscripts. The findings show that organizations with a market culture show the highest new product performance, while hierarchy-type organizations show the lowest performance. The influence of national culture variables supports the effect of value congruency, and shows that in individualistic cultures the impact of a clan culture decreases, the impact of an adhocracy culture type decreases with uncertainty avoidance, and the influence of a hierarchy culture type increases with power distance. The superior effect of a market culture type can be matched by other organizational orientations, but in particular national cultures only. The combined findings underline the importance for firms that seek to improve the success rate of new products on international markets to consider the fit of a national culture with a firm's organizational culture.

Influence of processing and clay type on nanostructure and stability of polypropylene-clay nanocomposites

Melt processing is a critical step in the manufacture of polymer articles and is even more critical when dealing with inhomogeneous polymer-clay nanocomposites systems. The chemical composition, and in particular the clay type and its organic modification, also plays a major contribution in determining the final properties and in particular the thermal and long-term oxidative stability of the resulting polymer nanocomposites. Proper selection and tuning of the process variable should, in principle, lead to improved characteristics of the fabricated product. With multiphase systems containing inorganic nanoclays, however, this is not straightforward and it is often the case that the process conditions are chosen initially to improve one or more desired properties at the expense of others. This study assesses the influence of organo-modified clays and the processing parameters (extrusion temperature and screw speed) on the rheological and morphological characteristics of polymer nanocomposites as well as on their melt and thermo-oxidative stability. Nanocomposites (PPNCs) based on PP, maleated PP and organically modified clays were prepared in different co-rotating twin-screw extruders ranging from laboratory scale to semi-industrial scale. Results show that the amount of surfactant present in similar organo-modified clays affects differently the thermo-oxidative stability of the extruded PPNCs and that changes in processing conditions affect the clay morphology too. By choosing an appropriate set of tuned process variables for the extrusion process it would be feasible to selectively fabricate polymer-clay nanocomposites, with the desired mechanical and thermo-oxidative characteristics. © 2013 Elsevier Ltd. All rights reserved.

Factorizations of some Groups of Lie Type of Lie Rank 4

Еленка Генчева, Цанко Генчев В настоящата работа се разглеждат крайни прости групи G , които могат да се представят като произведение на две свои собствени неабелеви прости подгрупи A и B. Всяко такова представяне G = AB е прието да се нарича факторизация на G, а тъй като множителите A и B са избрани да бъдат прости подгрупи на G, то разглежданите факторизации са известни още като прости факторизации на G. Тук се предполага, че G е проста група от лиев тип и лиев ранг 4 над крайно поле GF (q). Ключови думи: крайни прости групи, групи от лиев тип, факторизации на групи.

Solutions Globales Régulières pour Quelques Équations Lineaires D'évolution du Type Pseudo-Différentiel Singulier

2000 Mathematics Subject Classification: 35C15, 35D05, 35D10, 35S10, 35S99.