Development of a generic crop model template in the cropping system model APSIM

The Agricultural Production Systems slMulator, APSIM, is a cropping system modelling environment that simulates the dynamics of soil-plant-management interactions within a single crop or a cropping system. Adaptation of previously developed crop models has resulted in multiple crop modules in APSIM, which have low scientific transparency and code efficiency. A generic crop model template (GCROP) has been developed to capture unifying physiological principles across crops (plant types) and to provide modular and efficient code for crop modelling. It comprises a standard crop interface to the APSIM engine, a generic crop model structure, a crop process library, and well-structured crop parameter files. The process library contains the major science underpinning the crop models and incorporates generic routines based on physiological principles for growth and development processes that are common across crops. It allows APSIM to simulate different crops using the same set of computer code. The generic model structure and parameter files provide an easy way to test, modify, exchange and compare modelling approaches at process level without necessitating changes in the code. The standard interface generalises the model inputs and outputs, and utilises a standard protocol to communicate with other APSIM modules through the APSIM engine. The crop template serves as a convenient means to test new insights and compare approaches to component modelling, while maintaining a focus on predictive capability. This paper describes and discusses the scientific basis, the design, implementation and future development of the crop template in APSIM. On this basis, we argue that the combination of good software engineering with sound crop science can enhance the rate of advance in crop modelling. Crown Copyright (C) 2002 Published by Elsevier Science B.V. All rights reserved.

Product form approximations for highly linear loss networks with trunk reservation

Admission controls, such as trunk reservation, are often used in loss networks to optimise their performance. Since the numerical evaluation of performance measures is complex, much attention has been given to finding approximation methods. The Erlang Fixed-Point (EFP) approximation, which is based on an independent blocking assumption, has been used for networks both with and without controls. Several more elaborate approximation methods which account for dependencies in blocking behaviour have been developed for the uncontrolled setting. This paper is an exploratory investigation of extensions and synthesis of these methods to systems with controls, in particular, trunk reservation. In order to isolate the dependency factor, we restrict our attention to a highly linear network. We will compare the performance of the resulting approximations against the benchmark of the EFP approximation extended to the trunk reservation setting. By doing this, we seek to gain insight into the critical factors in constructing an effective approximation. (C) 2003 Elsevier Ltd. All rights reserved.

The variety of variables in automated real-time refinement

The refinement calculus is a well-established theory for deriving program code from specifications. Recent research has extended the theory to handle timing requirements, as well as functional ones, and we have developed an interactive programming tool based on these extensions. Through a number of case studies completed using the tool, this paper explains how the tool helps the programmer by supporting the many forms of variables needed in the theory. These include simple state variables as in the untimed calculus, trace variables that model the evolution of properties over time, auxiliary variables that exist only to support formal reasoning, subroutine parameters, and variables shared between parallel processes.

A modified Weibull distribution

A new lifetime distribution capable of modeling a bathtub-shaped hazard-rate function is proposed. The proposed model is derived as a limiting case of the Beta Integrated Model and has both the Weibull distribution and Type I extreme value distribution as special cases. The model can be considered as another useful 3-parameter generalization of the Weibull distribution. An advantage of the model is that the model parameters can be estimated easily based on a Weibull probability paper (WPP) plot that serves as a tool for model identification. Model characterization based on the WPP plot is studied. A numerical example is provided and comparison with another Weibull extension, the exponentiated Weibull, is also discussed. The proposed model compares well with other competing models to fit data that exhibits a bathtub-shaped hazard-rate function.

A coupled knowledge-based expert system for design of liquid-retaining structures

This paper describes a coupled knowledge-based system (KBS) for the design of liquid-retaining structures, which can handle both the symbolic knowledge processing based on engineering heuristics in the preliminary synthesis stage and the extensive numerical crunching involved in the detailed analysis stage. The prototype system is developed by employing blackboard architecture and a commercial shell VISUAL RULE STUDIO. Its present scope covers design of three types of liquid-retaining structures, namely, a rectangular shape with one compartment, a rectangular shape with two compartments and a circular shape. Through custom-built interactive graphical user interfaces, the user is directed throughout the design process, which includes preliminary design, load specification, model generation, finite element analysis, code compliance checking and member sizing optimization. It is also integrated with various relational databases that provide the system with sectional properties, moment and shear coefficients and final member details. This system can act as a consultant to assist novice designers in the design of liquid-retaining structures with increase in efficiency and optimization of design output and automated record keeping. The design of a typical example of the liquid-retaining structure is also illustrated. (C) 2003 Elsevier B.V All rights reserved.

API documentation with executable examples

The rise of component-based software development has created an urgent need for effective application program interface (API) documentation. Experience has shown that it is hard to create precise and readable documentation. Prose documentation can provide a good overview but lacks precision. Formal methods offer precision but the resulting documentation is expensive to develop. Worse, few developers have the skill or inclination to read formal documentation. We present a pragmatic solution to the problem of API documentation. We augment the prose documentation with executable test cases, including expected outputs, and use the prose plus the test cases as the documentation. With appropriate tool support, the test cases are easy to develop and read. Such test cases constitute a completely formal, albeit partial, specification of input/output behavior. Equally important, consistency between code and documentation is demonstrated by running the test cases. This approach provides an attractive bridge between formal and informal documentation. We also present a tool that supports compact and readable test cases; and generation of test drivers and documentation, and illustrate the approach with detailed case studies. (C) 2002 Elsevier Science Inc. All rights reserved.

Architectural prototyping: from CCS to .Net

Over the last decade, software architecture emerged as a critical issue in Software Engineering. This encompassed a shift from traditional programming towards software development based on the deployment and assembly of independent components. The specification of both the overall systems structure and the interaction patterns between their components became a major concern for the working developer. Although a number of formalisms to express behaviour and to supply the indispensable calculational power to reason about designs, are available, the task of deriving architectural designs on top of popular component platforms has remained largely informal. This paper introduces a systematic approach to derive, from CCS behavioural specifications the corresponding architectural skeletons in the Microsoft .Net framework, in the form of executable C and Cω code. The prototyping process is fully supported by a specific tool developed in Haskell

The verification of temporal KBS: SPARSE - a case study in power systems

In this paper we present VERITAS, a tool that focus time maintenance, that is one of the most important processes in the engineering of the time during the development of KBS. The verification and validation (V&V) process is part of a wider process denominated knowledge maintenance, in which an enterprise systematically gathers, organizes, shares, and analyzes knowledge to accomplish its goals and mission. The V&V process states if the software requirements specifications have been correctly and completely fulfilled. The methodologies proposed in software engineering have showed to be inadequate for Knowledge Based Systems (KBS) validation and verification, since KBS present some particular characteristics. VERITAS is an automatic tool developed for KBS verification which is able to detect a large number of knowledge anomalies. It addresses many relevant aspects considered in real applications, like the usage of rule triggering selection mechanisms and temporal reasoning.

PSiS mobile

Os sistemas de recomendação têm vindo a ser cada vez mais utilizados nos últimos anos. Por isso, é imprescindível que estes sistemas se adaptem à evolução da sociedade incluindo cada vez mais novas funcionalidades, tais como a adaptação do sistema ao contexto da pessoa. Esta adaptação pode ser feita através de, por exemplo, dispositivos móveis, que têm vindo a apresentar uma taxa de crescimento de vendas muito grande. Dada a crescente integração dos sistemas de recomendação com os sistemas móveis, foi elaborado um estudo sobre o estado da arte dos sistemas de auxílio ao turista que utilizam dispositivos móveis, sendo apresentadas as suas vantagens e desvantagens. Estes sistemas móveis de auxílio a turistas foram divididos em dois grupos: os que apresentam apenas a informação sobre pontos de interesse e os sistemas que são capazes de efectuar recomendações, com base no perfil do turista. Um breve estudo sobre os sistemas operativos para dispositivos móveis é apresentado, sendo especialmente focado o sistema operativo Android que foi o escolhido para esta implementação. Como os dispositivos móveis, actualmente, ainda possuem várias limitações, estas foram descritas e apresentadas as boas práticas no desenvolvimento de aplicações para este tipo de sistemas. É também apresentado um estudo que visa descobrir qual é o método mais leve e mais rápido para trocar dados entre a parte servidora e a parte móvel. Com a parte introdutória apresentada, é exposto o projecto desenvolvido nesta tese, o PSiS Mobile. Este sistema é um módulo que faz parte do projecto PSiS e pretende trazer todas as vantagens dos sistemas móveis para o sistema base já implementado. O projecto PSiS foca-se no estabelecimento de planos de visita personalizados com indicação de percursos para turistas com tempo limitado. Apoiando a definição de planos de visitas de acordo com o perfil do turista (interesses, valores pessoais, desejos, restrições, deficiências, etc.) combinando os produtos de turismo mais adequados (locais de interesse, eventos, restaurantes, etc.) em itinerários eficientes. A utilização de dispositivos móveis para acompanhamento da visita permite uma rápida interacção entre o turista e o sistema. Assim, o PSiS poderá recolher informação contextual do utilizador para que o perfil do mesmo seja enriquecido. O sistema apresentado é composto por duas partes: a parte cliente e a parte servidora. Toda a informação, como por exemplo o perfil do turista, histórico de viagens e valores de similaridade entre utilizadores está presente na parte servidora. O processo de recomendação também é efectuado pela aplicação servidora, sendo esta a responsável pela atribuição de uma classificação aos pontos de interesse tendo em conta o perfil do utilizador em causa. A base de dados do PSiS possui toda a informação relativa aos pontos de interesse numa determinada cidade ou região e o portfólio completo do histórico de visitas de cada utilizador. A componente móvel é uma parte muito importante para o sistema, pois interage com o utilizador no terreno. Um dispositivo móvel como o PDA, não só permite a apresentação de informação relevante ao utilizador, como também permite a recolha automática de informação contextual (por exemplo, a localização). Toda esta informação contribui para a definição de um perfil completo e para uma melhor adaptação do sistema às necessidades do utilizador. De forma a nem sempre estar dependente do servidor, a aplicação móvel possui rotinas para a realização de recomendações básicas. Ou seja, a aplicação móvel não realiza a classificação dos pontos de interesse, mas apenas mostra os principais resultados já formados pela parte servidora. Por exemplo, se um utilizador gostar de comida Chinesa, um restaurante Chinês nas imediações irá ter uma boa classificação e, por isso, ser recomendado. A aplicação móvel mostra ao turista o percurso definido para o dia em que o mesmo se encontra, sendo feito o rastreio do trajecto que o mesmo efectua. Assim, o sistema consegue saber se o horário do planeamento está a ser cumprido ou não. Caso não esteja, é invocado um algoritmo de planeamento que irá tentar corrigir o atraso ou o adiantamento perante o horário inicial. Depois de visitar um ponto de interesse, é pedido ao utilizador para fornecer feedback sobre o mesmo. Se desejado também é possível mostrar os pontos de interesse existentes perto do turista (usando as coordenadas GPS obtidas pelo dispositivo móvel) organizados por categorias, raio de distância, etc. Apesar dos dispositivos móveis possuírem várias restrições, pretendeu-se proporcionar ao utilizador uma boa experiência, através de uma aplicação rápida, de fácil utilização e adaptável, incluindo funcionalidades de planeamento, realidade aumentada e integração com a rede social do sistema. Todos estes factores contribuem para a disponibilização de informação detalhada ao turista.

A framework for the development of parallel and distributed real-time embedded systems

Embedded real-time applications increasingly present high computation requirements, which need to be completed within specific deadlines, but that present highly variable patterns, depending on the set of data available in a determined instant. The current trend to provide parallel processing in the embedded domain allows providing higher processing power; however, it does not address the variability in the processing pattern. Dimensioning each device for its worst-case scenario implies lower average utilization, and increased available, but unusable, processing in the overall system. A solution for this problem is to extend the parallel execution of the applications, allowing networked nodes to distribute the workload, on peak situations, to neighbour nodes. In this context, this report proposes a framework to develop parallel and distributed real-time embedded applications, transparently using OpenMP and Message Passing Interface (MPI), within a programming model based on OpenMP. The technical report also devises an integrated timing model, which enables the structured reasoning on the timing behaviour of these hybrid architectures.

Software transactional memory as a building block for parallel embedded realtime systems

The recent trends of chip architectures with higher number of heterogeneous cores, and non-uniform memory/non-coherent caches, brings renewed attention to the use of Software Transactional Memory (STM) as a fundamental building block for developing parallel applications. Nevertheless, although STM promises to ease concurrent and parallel software development, it relies on the possibility of aborting conflicting transactions to maintain data consistency, which impacts on the responsiveness and timing guarantees required by embedded real-time systems. In these systems, contention delays must be (efficiently) limited so that the response times of tasks executing transactions are upper-bounded and task sets can be feasibly scheduled. In this paper we assess the use of STM in the development of embedded real-time software, defending that the amount of contention can be reduced if read-only transactions access recent consistent data snapshots, progressing in a wait-free manner. We show how the required number of versions of a shared object can be calculated for a set of tasks. We also outline an algorithm to manage conflicts between update transactions that prevents starvation.

Layered smart grid architecture approach and field tests by ZigBee technology

This paper presents a layered Smart Grid architecture enhancing security and reliability, having the ability to act in order to maintain and correct infrastructure components without affecting the client service. The architecture presented is based in the core of well design software engineering, standing upon standards developed over the years. The layered Smart Grid offers a base tool to ease new standards and energy policies implementation. The ZigBee technology implementation test methodology for the Smart Grid is presented, and provides field tests using ZigBee technology to control the new Smart Grid architecture approach. (C) 2014 Elsevier Ltd. All rights reserved.

Information technology service management: an experimental approach towards IT service prediction

Dissertation presented to obtain a Masters degree in Computer Science

Step count algorithm adapted to indoor localization

This paper presents a step count algorithm designed to work in real-time using low computational power. This proposal is our first step for the development of an indoor navigation system, based on Pedestrian Dead Reckoning (PDR). We present two approaches to solve this problem and compare them based in their error on step counting, as well as, the capability of their use in a real time system.

Simulation Environment for Multi-Robot Cooperative 3D Target Perception

4th International Conference, SIMPAR 2014, Bergamo, Italy, October 20-23, 2014