Frequência da infecção por Toxoplasma gondii em galinhas caipira e frangos de corte em regiões dos Estados do Rio Grande do Norte e Paraíba

Toxoplasmosis is a zoonosis caused by Toxoplasma gondii, a protozoan that has a cosmopolitan geographic distribution and low host specificity. Usually a benign and selflimiting, infection can manifest itself in a severe systemic becoming overwhelming in fetuses and patients with immunosuppression. Domestic fowl are considered one of the most important hosts in the epidemiology of toxoplasmosis, since they are potential sources of infection for humans, in addition to playing the role of important indicators of environmental contamination by oocysts of T. gondii. We studied the prevalence of infection by the protozoan in chickens of different breeding systems mesoregions from the states of Rio Grande do Norte and Paraiba: broilers from commercial farms (200/PB) and free-range chickens of small farms (322/RN and PB). Were standardized IFAT and ELISA techniques for detecting specific antibodies in blood samples of birds, and commercial kit was used to determine the prevalence by IHAT. There was no seropositive reaction by T. gondii in the samples of broilers tested, indicating that the particularities of intensive management limit the chances of infection for these animals. Among the hens, the frequency of IgG anti-T. gondii diagnosed by the techniques of IHAT, IFAT and ELISA, respectively, were 3.73% (12/322), 37.88% (122/322) and 40.37% (130/322), for both young and adult animals. Amongst the seropositive samples by IFAT, 33 (27.05%) were positive at a dilution of 1:16, in 1:32, 31 (25.41%), in 1:64, 24 (19.67%), 15 (12.29%) in 1:128, and 19 presented titer greater than or equal to 1:256 (15.57%). The evaluation of the presence of anti-T. gondii should be careful, and reagents IHAT provided erratic results in this measure for the specie studied. This suggests the need for own standardization of the kit before the use in epidemiological studies in animal species. On the other hand, substantial agreement observed between IFAT and ELISA techniques (Kappa = 0.62) enables these methods as effective methodologies for the diagnosis of toxoplasmosis in chickens. The high prevalence of specific antibodies among poultry in the region studied attempts to the potential risk of transmission of toxoplasmosis to humans

Caracterização morfológica e frequência dos estádios do ciclo do epitélio seminífero em preás (Galea spixii Wagler, 1831) criados em cativeiro

Estudos baseados nas características testiculares estão altamente relacionados com a eficiência reprodutiva de varias espécies. Assim, o projeto desenvolvido teve como objetivo identificar as células do epitélio seminífero, caracterizar histologicamente suas associações, que formam os estádios, e determinar a frequência destes. Os fragmentos de testículos, com 30, 45, 60, 75, 90, 105, 120, 150 dias foram coletados no Centro de Multiplicação da Universidade Federal Rural do Semi-Árido (UFERSA), Mossoró/ RN. Passando pelos processos de fixação, lavagens em soluções de concentrações crescentes de álcoois (70-100%), desidratação em xilol, inclusão em Histosec®, preparação das lâminas histológicas, colorações em Hematoxilina e Eosina (HE) e suas fotomicrografias para a caracterização dos núcleos celulares do epitélio germinativo e a definição dos oitos estágios do ciclo do epitélio seminífero (CES) baseados no Método da Morfologia Tubular. Das faixas etárias analisadas todos os animais de 90-150 dias de idade apresentaram todos os estádios do CES. Os estádios I e III foram os que apresentaram maior e menor freqüência, respectivamente. Os animais caracterizados como pré-púberes (30 dias), púberes (45-90 dias de idade) e pós-púberes (105150 dias de idade) apresentaram os estádios I, VIII e IV com uma maior freqüência, respectivamente.

Análise da variabilidade da frequência cardíaca na síndrome dos ovários policísticos

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Associação da frequência alélica dos polimorfismos dos genes do sistema renina angiotensina com a força muscular e pressão arterial de idosas

Physiological changes induced by the aging process is dynamic and progressive, reducing the adaptability and independence of older people and may be influenced by genetic and environmental factors. Thus the aim of this thesis was to investigate the association between polymorphism of the ACE gene ID and the phenotypes of muscular strength and blood pressure of 62 elderly Brazilian (67.35 ± 5.66 years) during a 16-week program of supervised training. The elderly women were stratified by age, with the group 1 (G1, n = 34) <70 years and group 2 (G2 n = 28) ≥ 70 years, and in three groups by ACE, ACE-II (n = 8) ACE- DD (n = 35) and ACE-ID (n = 19). The level of muscle strength was evaluated by the method of maximum repetitions and measures of blood pressure (BP) were measured before and after training (PAPré1 and PAPós1) and before and after each training session (PAPre2 and PAPós2), in place of training. DNA samples were isolated from peripheral blood leukocytes polymorphism and insertion / deletion (ID) of the ACE gene (rs1800795) was genotyped by polymerase chain reaction (PCR) plus PCR-confirmatory. The genotype distribution of the polymorphism ID attended the prerogatives of Hardy-Weitíherg. There was variation in power levels before and after training and the age between groups (t-test) and the ACE polymorphism (ANOVA) (p <0.05). Depending on the results it was concluded that resistance training helps to reduce SBP and increased muscle strength of upper and lower limbs when considering the age and ACE polymorphism. In this study the Elderly carriers of the D allele were more reactive to changes in BP resistance training. This study was multidisciplinary project involving researchers in the areas Medical, Physical Education, Pharmacy, Nutrition, Gerontology and Statistics. This fulfilled the requirements of the multidisciplinary Graduate Program in Health Sciences

Efeitos do exercício físico aeróbio na modulação autonomica da frequência cardíaca de mulheres com sindrome dos ovários policisticos

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Avaliação da publicidade de medicamentos veiculada nas principais emissoras de rádio de Natal-RN

Drugs advertising is one of the most important marketing resources used by the pharmaceutical industry to induce people to buy these products although they do not have the real necessity to use them. The purpose of this article is to evaluate drugs advertisings transmitted on radio stations in Natal/RN, from October 2007 to September 2008. Were collected 228 advertising pieces, where, 21 were different among themselves and corresponded to 15 drugs. The results showed that 73,3% of the drugs ads were announced on AM station and 26,7% on FM station. The majority of the drugs were constituted of analgesics (26%), following by antiacids, vitamins, phitotherapics (13% each). The legal analysis showed that each advertising had some kind of infraction. The omission of the registration number happened in each advertising, following by the totally lack of contraindications (95,2%) and contraindications DCB/DCI (76,2%). In 42,9% advertisements were observed the relation between drugs use and physique/intellectual/emotional/sexual performance and/or beauty and 33% of them had abusive exploration of illnesses. The obligatory warning was omitted in 28,6% and the offer of financial bonus happened in 9,5% cases. The content analysis demonstrated that the most persuasion and convincing elements observed were indicatives of consumption appeal (34,2%). The study indicates the necessity of the topic drugs advertisements to be treated in a wide context, that is, to be discussed as a public health concern. Although the advertising regulation and inspection is the State responsibility , this should be shared with the advertising agency, pharmaceutical industry and media. Furthermore, it is indispensable to inform and to conscience the population of their rights in such mistaken situation

Análise da frequência alélica de 15 LOCI STR na população do Rio Grande do Norte

Human population have a significant number of polymorphic loci, whose use and applications range from construction of linkage maps, to study the evolution of populations, through the determination of paternity, forensic medicine and migration. Currently, STRs (Short Tanden Repeats) markers are considered the major markers for human identification, mainly due to its abundance and high variability because of the fact that they are easily amplifiable by PCR (Polymerase Chain Reaction), work with low amounts of DNA and be capable of automation processes involving fluorescence detection. The creation of regional databases containing allele frequencies of population provide subsidies to increase the reliability of the results of determining the genetic link. This paper aims to obtain a database of allele frequencies of 15 polymorphic molecular loci (D8S1179, D21S11, D7S820, CSF1PO, D19S433, vWA, TPOX, D18S51, D3S1358, TH01, D13S317, D16S539, D2S1338, D5S818 e FGA) in a population classifies as born in the State of Rio Grande do Norte, Brazil, totaling 1100 unrelated individuals. To evaluate the frequency, DNA samples were submitted to PCR amplification, followed by capilarry electrophoresis genetic sequencer. The frequencies identified in this study were compared with brazilian population in general and other states in Brazil. Except for the loci D21S11, D19S433 and D2D1338, the genotypes found were in Hardy-Weinberg equilibrium and no significant differences among the frequencies were found in the populations studied. The most informative loci was D2S1338 and D18S51, and the less informative is the locus TPOX

Frequência de retinopatia da prematuridade em recém-nascidos no Hospital das Clínicas da Faculdade de Medicina de Ribeirão Preto da Universidade de São Paulo

OBJETIVOS: Determinar a frequência de retinopatia da prematuridade no Hospital das Clínicas da Faculdade de Medicina de Ribeirão Preto (HCFMRP-USP) e verificar a associação da retinopatia da prematuridade com fatores de risco conhecidos. MÉTODOS: Foi realizada análise prospectiva de 70 pacientes, nascidos no HCFMRP-USP, com peso inferior a 1.500 gramas, no período de um ano. Os pacientes foram divididos em dois grupos (Retinopatia da prematuridade e Normal) para realização de análise estatística com relação a fatores de risco conhecidos. Adotou-se nível de significância de 5%. RESULTADOS: A frequência de retinopatia da prematuridade foi de 35,71% entre os pré-termos estudados. Os fatores pesquisados que apresentaram relação de risco para o desenvolvimento da doença foram: peso (p=0,001), idade gestacional (p=0,001), escore SNAPPE II (p=0,008), uso de oxigenoterapia por intubação (p=0,019) e por pressão positiva de vias aéreas (p=0,0017), múltiplas transfusões sanguíneas (p=0,01) e uso de diuréticos (p=0,01). CONCLUSÃO: A frequência de retinopatia da prematuridade foi de 35,71% entre os prétermos nascidos com menos de 1.500 g. Vários fatores de risco foram identificados nos recém-nascidos do HCFMRP-USP, sendo constatado que crianças mais pré-termos apresentam formas mais graves de retinopatia da prematuridade.

Placas de aço inoxidável 316L aplicadas no reparo de fratura experimental diafisária do rádio e ulna de cães

O objetivo do presente trabalho foi o de estudar a resistência à corrosão em placas de aço inoxidável 316L, com diferentes tipos de acabamento e tratamento superficial, e a possível interferência dessa reação corrosiva na consolidação óssea. Utilizaram-se placas semi-acabadas, polidas, tratadas com jatos de microesferas de vidro e passivadas, as quais foram aplicadas na epífise distal do rádio de cães. Foram utilizados 12 animais, divididos em dois grupos, nos quais, após osteotomia bilateral do rádio e ulna, foram realizadas osteossínteses do rádio, totalizando 24 procedimentos. Avaliou-se a evolução clínica e radiográfica das regiões que receberam os implantes aos 30, 60, 90, 180, 240 e 360 dias. Os animais do grupo 1 (GI) foram sacrificados aos 180 dias e os do GII aos 360 dias para estudo histológico e de microscopia eletrônica de varredura do local da osteotomia sob a região dos implantes metálicos e para estudo da resistência à corrosão no organismo, pelos implantes metálicos, por meio de análises química e metalográfica (microscopia óptica e eletrônica de varredura e espectroscopia de espalhamento de energia por raios X). Os animais recuperaram a função dos membros operados 24 horas após a cirurgia. Radiograficamente, verificou-se a consolidação óssea em todos os animais. Macro e microscopicamente não foram observados sinais de corrosão nos implantes metálicos, exceto em uma placa passivada, aplicada no rádio esquerdo de um animal, na qual a corrosão foi detectada pela microscopia óptica e eletrônica de varredura. Este estudo permite concluir que as placas de aço inoxidável 316L, independente do acabamento superficial a que foram submetidas, não sofreram corrosão ou reações adversas e foram efetivas no tratamento das fraturas experimentais do rádio e ulna de cães.

Biocompatibilidade do cimento de fosfato de cálcio implantado no rádio de coelhos

OBJETIVO: Avaliar a biocompatibilidade do cimento de fosfato de cálcio, para verificar sua eficácia como possível substituto ósseo. MÉTODOS: No presente trabalho, foi utilizado cimento de fosfato de cálcio em rádio de 8 coelhos, separados em dois grupos (GI e GII), referentes aos tempos de observação de 12 e 26 semanas pós-operatórias, a fim de se observar as reações entre este biomaterial e o tecido ósseo do animal. Foram feitas análises radiográficas e de densitometria óptica, além de microscopia óptica e eletrônica de varredura. RESULTADOS: Observou-se, ao final do experimento, que o cimento à base de fosfato de cálcio foi parcialmente reabsorvido durante o tempo de observação de 26 semanas, apresentando biocompatibilidade, com ausência de reações indesejáveis que pudessem ser atribuídas aos implantes. CONCLUSÕES: O cimento à base de fosfato de cálcio foi biocompatível e parcialmente reabsorvido no período de 26 semanas de observação. Tempos maiores de observação são necessários para a avaliação da reabsorção.

Influência da frequência de suplementação no consumo, na digestibilidade e na fermentação ruminal em novilhos de corte mantidos em pastagem de capim-marandu

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise e otimização de superfícies seletivas de Frequência utilizando redes neurais artificiais e algoritmos de otimização natural

The bidimensional periodic structures called frequency selective surfaces have been well investigated because of their filtering properties. Similar to the filters that work at the traditional radiofrequency band, such structures can behave as band-stop or pass-band filters, depending on the elements of the array (patch or aperture, respectively) and can be used for a variety of applications, such as: radomes, dichroic reflectors, waveguide filters, artificial magnetic conductors, microwave absorbers etc. To provide high-performance filtering properties at microwave bands, electromagnetic engineers have investigated various types of periodic structures: reconfigurable frequency selective screens, multilayered selective filters, as well as periodic arrays printed on anisotropic dielectric substrates and composed by fractal elements. In general, there is no closed form solution directly from a given desired frequency response to a corresponding device; thus, the analysis of its scattering characteristics requires the application of rigorous full-wave techniques. Besides that, due to the computational complexity of using a full-wave simulator to evaluate the frequency selective surface scattering variables, many electromagnetic engineers still use trial-and-error process until to achieve a given design criterion. As this procedure is very laborious and human dependent, optimization techniques are required to design practical periodic structures with desired filter specifications. Some authors have been employed neural networks and natural optimization algorithms, such as the genetic algorithms and the particle swarm optimization for the frequency selective surface design and optimization. This work has as objective the accomplishment of a rigorous study about the electromagnetic behavior of the periodic structures, enabling the design of efficient devices applied to microwave band. For this, artificial neural networks are used together with natural optimization techniques, allowing the accurate and efficient investigation of various types of frequency selective surfaces, in a simple and fast manner, becoming a powerful tool for the design and optimization of such structures

Estudo do acoplamento entre superfícies seletivas de frequência assimétricas em estruturas de multicamadas

This work presents the development of new microwaves structures, filters and high gain antenna, through the cascading of frequency selective surfaces, which uses fractals Dürer and Minkowski patches as elements, addition of an element obtained from the combination of the other two simple the cross dipole and the square spiral. Frequency selective surfaces (FSS) includes a large area of Telecommunications and have been widely used due to its low cost, low weight and ability to integrate with others microwaves circuits. They re especially important in several applications, such as airplane, antennas systems, radomes, rockets, missiles, etc. FSS applications in high frequency ranges have been investigated, as well as applications of cascading structures or multi-layer, and active FSS. In this work, we present results for simulated and measured transmission characteristics of cascaded structures (multilayer), aiming to investigate the behavior of the operation in terms of bandwidth, one of the major problems presented by frequency selective surfaces. Comparisons are made with simulated results, obtained using commercial software such as Ansoft DesignerTM v3 and measured results in the laboratory. Finally, some suggestions are presented for future works on this subject

Análise e síntese de antenas e superfícies seletivas de frequência utilizando computação evolucionária e inteligência de enxames

The frequency selective surfaces, or FSS (Frequency Selective Surfaces), are structures consisting of periodic arrays of conductive elements, called patches, which are usually very thin and they are printed on dielectric layers, or by openings perforated on very thin metallic surfaces, for applications in bands of microwave and millimeter waves. These structures are often used in aircraft, missiles, satellites, radomes, antennae reflector, high gain antennas and microwave ovens, for example. The use of these structures has as main objective filter frequency bands that can be broadcast or rejection, depending on the specificity of the required application. In turn, the modern communication systems such as GSM (Global System for Mobile Communications), RFID (Radio Frequency Identification), Bluetooth, Wi-Fi and WiMAX, whose services are highly demanded by society, have required the development of antennas having, as its main features, and low cost profile, and reduced dimensions and weight. In this context, the microstrip antenna is presented as an excellent choice for communications systems today, because (in addition to meeting the requirements mentioned intrinsically) planar structures are easy to manufacture and integration with other components in microwave circuits. Consequently, the analysis and synthesis of these devices mainly, due to the high possibility of shapes, size and frequency of its elements has been carried out by full-wave models, such as the finite element method, the method of moments and finite difference time domain. However, these methods require an accurate despite great computational effort. In this context, computational intelligence (CI) has been used successfully in the design and optimization of microwave planar structures, as an auxiliary tool and very appropriate, given the complexity of the geometry of the antennas and the FSS considered. The computational intelligence is inspired by natural phenomena such as learning, perception and decision, using techniques such as artificial neural networks, fuzzy logic, fractal geometry and evolutionary computation. This work makes a study of application of computational intelligence using meta-heuristics such as genetic algorithms and swarm intelligence optimization of antennas and frequency selective surfaces. Genetic algorithms are computational search methods based on the theory of natural selection proposed by Darwin and genetics used to solve complex problems, eg, problems where the search space grows with the size of the problem. The particle swarm optimization characteristics including the use of intelligence collectively being applied to optimization problems in many areas of research. The main objective of this work is the use of computational intelligence, the analysis and synthesis of antennas and FSS. We considered the structures of a microstrip planar monopole, ring type, and a cross-dipole FSS. We developed algorithms and optimization results obtained for optimized geometries of antennas and FSS considered. To validate results were designed, constructed and measured several prototypes. The measured results showed excellent agreement with the simulated. Moreover, the results obtained in this study were compared to those simulated using a commercial software has been also observed an excellent agreement. Specifically, the efficiency of techniques used were CI evidenced by simulated and measured, aiming at optimizing the bandwidth of an antenna for wideband operation or UWB (Ultra Wideband), using a genetic algorithm and optimizing the bandwidth, by specifying the length of the air gap between two frequency selective surfaces, using an optimization algorithm particle swarm

Análise e projeto de superfícies seletivas de frequência com elementos pré-fractais para aplicações em comunicações indoor

In this thesis, a frequency selective surface (FSS) consists of a two-dimensional periodic structure mounted on a dielectric substrate, which is capable of selecting signals in one or more frequency bands of interest. In search of better performance, more compact dimensions, low cost manufacturing, among other characteristics, these periodic structures have been continually optimized over time. Due to its spectral characteristics, which are similar to band-stop or band-pass filters, the FSSs have been studied and used in several applications for more than four decades. The design of an FSS with a periodic structure composed by pre-fractal elements facilitates the tuning of these spatial filters and the adjustment of its electromagnetic parameters, enabling a compact design which generally has a stable frequency response and superior performance relative to its euclidean counterpart. The unique properties of geometric fractals have shown to be useful, mainly in the production of antennas and frequency selective surfaces, enabling innovative solutions and commercial applications in microwave range. In recent applications, the FSSs modify the indoor propagation environments (emerging concept called wireless building ). In this context, the use of pre-fractal elements has also shown promising results, allowing a more effective filtering of more than one frequency band with a single-layer structure. This thesis approaches the design of FSSs using pre-fractal elements based on Vicsek, Peano and teragons geometries, which act as band-stop spatial filters. The transmission properties of the periodic surfaces are analyzed to design compact and efficient devices with stable frequency responses, applicable to microwave frequency range and suitable for use in indoor communications. The results are discussed in terms of the electromagnetic effect resulting from the variation of parameters such as: fractal iteration number (or fractal level), scale factor, fractal dimension and periodicity of FSS, according the pre-fractal element applied on the surface. The analysis of the fractal dimension s influence on the resonant properties of a FSS is a new contribution in relation to researches about microwave devices that use fractal geometry. Due to its own characteristics and the geometric shape of the Peano pre-fractal elements, the reconfiguration possibility of these structures is also investigated and discussed. This thesis also approaches, the construction of efficient selective filters with new configurations of teragons pre-fractal patches, proposed to control the WLAN coverage in indoor environments by rejecting the signals in the bands of 2.4~2.5 GHz (IEEE 802.11 b) and 5.0~6.0 GHz (IEEE 802.11a). The FSSs are initially analyzed through simulations performed by commercial software s: Ansoft DesignerTM and HFSSTM. The fractal design methodology is validated by experimental characterization of the built prototypes, using alternatively, different measurement setups, with commercial horn antennas and microstrip monopoles fabricated for low cost measurements