An Eventful Synthetic Approach Towards the Biologically Potent Natural Product Ottelione A: Enantio-, Regio- and Stereoselective Construction of the Bicyclic Core

A novel synthetic approach towards the recently reported anti-tumor and anti-tuberculor natural product ottelione A from the readily available Diels-Alder adduct of cyclopentadiene and p-benzoquinone is delineated. Our short strategy, besides being enantio-, regio- and stereoselective, charts an eventful course and is inherently well-suited for adaptation towards diverse synthetic analogues of this biologically potent natural product.

Neural network based approach to standard cell placement

We propose a novel algorithm for placement of standard cells in VLSI circuits based on an analogy of this problem with neural networks. By employing some of the organising principles of these nets, we have attempted to improve the behaviour of the bipartitioning method as proposed by Kernighan and Lin. Our algorithm yields better quality placements compared with the above method, and also makes the final placement independent of the initial partition.

Trends in Pharmaceutical Product Development 2000-2010

Merkittävä osa alkuperäislääkevalmistajien tutkimus- ja tuotekehityskuluista näyttää olevan suunnattu olemassa olevien lääkkeiden kehittämiseen. Tämä voi oletettavasti johtaa kiinnostaviin formulaatiokehitysstrategioihin. Tutkimuksen tarkoituksena oli selvittää, voidaanko farmaseuttisen tuotekehityksen trendejä havaita myönnettyjen myyntilupien perusteella. Tutkimuksen mielenkiinnon kohteena olivat myös suurimpien lääkeyritysten käyttämät elinkaaren hallinnan keinot, joilla suojataan myyvimpiä tuotteita geneeriseltä kilpailulta ja varmistetaan markkinaosuus. Tutkimuksen painopiste oli kiinteissä oraalisissa lääkevalmisteissa. Laadullisten ja määrällisten menetelmien yhdistelmää käytettiin laajan näkökulman saamiseksi tutkittavaan aiheeseen. Suomalaisten myyntilupaviranomaisten haastatteluja käytettiin keräämään taustatietoa tutkimuksen määrällistä osaa varten. Määrällinen osa koostui myyntilupatietokannoista, jotka käsittivät kaikkien menettelyjen kautta Suomessa myönnetyt myyntiluvat, keskitetyn menettelyn kautta EU:ssa myönnetyt myyntiluvat ja maailman kymmenen suurinta lääkeyritystä USA:ssa. Tutkimustulosten perusteella rinnakkaislääkkeiden määrässä tapahtui merkittävä nousu Suomessa kaikkien menettelyjen kautta myönnetyissä myyntiluvissa ja EU:ssa keskitetyn menettelyn kautta myönnetyissä myyntiluvissa vuosina 2000-2010. Tämä muutos saattaa ainakin osaksi johtua lainsäädännöllisistä muutoksista, joilla luotiin kannustimia rinnakkaislääkkeiden käyttöön ja valmistukseen, kuten lääkevaihto ja viitehintajärjestelmä. USA:n tiedot osoittivat suurten lääkevalmistajien kiinnostuksen elinkaaren hallintaan: suurin osa maailman kymmenelle suurimmalle lääkeyritykselle myönnetyistä myyntiluvista vuosina 2005-2010 oli tähän tarkoitukseen. Elinkaaren hallinnan suhde uusiin lääkeaineisiin oli lähes 4:1. Kiinteä oraalinen lääkemuoto on kiistatta kaikista suosituin tapa annostella lääke, minkä vahvistivat sekä arvioijien haastattelut että myyntilupatiedot. Kiinteiden oraalisten rooli oli entistäkin korostuneempi rinnakkaislääkkeiden kohdalla. Kun innovatiivisuutta mitattiin epätyypillisten annosmuotojen määrällä, USA:n tiedot kiinteistä oraalisista lääkemuodoista osoittivat vahvaa innovatiivisuutta Suomen ja EU:n tietoihin verrattuna. Tämä saattaa heijastaa suurten lääkeyritysten innovatiivista tuotevalikoimaa. Epätyypillisten kiinteiden oraalisten annosmuotojen osuus oli huomattavasti pienempi rinnakkaislääkkeissä kuin alkuperäislääkkeissä kaikilla alueilla. Elinkaaren hallinnassa käytetyimmät strategiat olivat uusi formulaatio, uusi vahvuus ja uusi yhdistelmä olemassa olevasta valmisteesta. Kiinteiden oraalisten lääkemuotojen osalta kaksi kolmasosaa uusista elinkaaren hallinnan formulaatioista oli säädellysti vapauttavia valmisteita. Elinkaaren hallinta on olennainen osa suurten lääkeyritysten liiketoimintastrategiaa, ja sen tärkeyttä havainnollistettiin Coreg-tablettien tapausesimerkillä.

Effect of water vapour stabilization of raw materials on the quality of the inhalation product

Generation of raw materials for dry powder inhalers by different size reduction methods can be expected to influence physical and chemical properties of the powders. This can cause differences in particle size, size distribution, shape, crystalline properties, surface texture and energy. These physical properties of powders influence the behaviour of particles before and after inhalation. Materials with an amorphous surface have different surface energy compared to materials with crystalline surface. This can affect the adhesion and cohesion of particles. Changes in the surface nature of the drug particles results in a change in product performance. By stabilization of the raw materials the amorphous surfaces are converted into crystalline surfaces. The primary aim of the study was to investigate the influence of the surface properties of the inhalation particles on the quality of the product. The quality of the inhalation product is evaluated by measuring the fine particle dose (FPD). FDP is the total dose of particles with aerodynamic diameters smaller than 5,0 μm. The secondary aim of this study was to achieve the target level of the FPD and the stability of the FPD. This study was also used to evaluate the importance of the stabilization of the inhalation powders. The study included manufacturing and analysing drug substance 200 μg/dose inhalation powder batches using non-stabilized or stabilized raw materials. The inhaler formulation consisted of micronized drug substance, lactose <100μm and micronized lactose <10μm. The inhaler device was Easyhaler®. Stabilization of the raw materials was done in different relative humidity, temperature and time. Surface properties of the raw materials were studied by dynamic vapour sorption, scanning electron microscopy and three-point nitrogen adsorption technique. Particle size was studied by laser diffraction particle size analyzer. Aerodynamic particle size distribution from inhalers was measured by new generation impactor. Stabilization of all three raw materials was successful. A clear difference between nonstabilized and stabilized raw materials was achieved for drug substance and lactose <10μm. However for lactose <100μm the difference wasn’t as clear as wanted. The surface of the non-stabilized drug substance was more irregular and the particles had more roughness on the surface compared to the stabilized drug substances particles surface. The surface of the stabilized drug particles was more regular and smoother than non-stabilized. Even though a good difference between stabilized and non-stabilized raw materials was achieved, a clear evidence of the effect of the surface properties of the inhalation particles on the quality of the product was not observed. Stabilization of the raw materials didn’t lead to a higher FPD. Possible explanations for the unexpected result might be too rough conditions in the stabilization of the drug substance or smaller than wanted difference in the degree of stabilization of the main component of the product <100μm. Despite positive effects on the quality of the product were not seen there appears to be some evidence that stabilized drug substance results in smaller particle size of dry powder inhalers.

Parallel min-cut placement on reduced hardware SIMD architecture.

Massively parallel SIMD computing is applied to obtain an order of magnitude improvement in the executional speed of an important algorithm in VLSI design automation. The physical design of a VLSI circuit involves logic module placement as a subtask. The paper is concerned with accelerating the well known Min-cut placement technique for logic cell placement. The inherent parallelism of the Min-cut algorithm is identified, and it is shown that a parallel machine based on the efficient execution of the placement procedure.

Reinstate hydrogen peroxide as the product of alternative oxidase of plant mitochondria

Chill treatment of potato tubers for 8 days induced mitochondrial O-2 consumption by cyanide-insensitive alternative oxidase (AOX). About half of the total O-2 consumption in such mitochondria was found to be sensitive to salicylhydroxamate (SHAM), a known inhibitor of AOX activity. Addition of catalase to the reaction mixture of AOX during the reaction decreased the rate of SHAM-sensitive O-2 consumption by nearly half, and addition at the end of the reaction released half of the O-2 consumed by AOX, both typical of catalase action on H2O2. This reaffirmed that the product of reduction of O-2 by plant AOX was H2O2 as found earlier and not H2O as reported in some recent reviews.

Missile battery placement for air defense: A dynamic programming approach

A procedure to evaluate surface-to-air missile battery placement patterns for air defense is presented. A measure of defense effectiveness is defined as a function of kill probability of the defense missiles and the nature of the surrounding terrain features. The concept of cumulative danger index is used to select the best path for a penetrating hostile aircraft for any given pattern of placement. The aircraft is assumed to be intelligent and well-informed. The path is generated using a dynamic programming methodology. The software package so developed can be used off-line to choose the best among a number of possible battery placement patterns.

Reaction of spironaphthalenones with hydroxylamine: Part II. Structure of product in the reaction of 1′-substituted spironaphthalenone.

Reaction of 1′-aryl substituted spironaphthalenones 1a–d with hydroxylamine hydrochloride in ethanol gave substituted cinnamic ester derivatives 4a–d. Similarly, reaction of spironaphthalenone 1a with different alcohols gave the corresponding esters 4i–m. Reaction of unsymmetrical spironaphthalenones 1e–h with hydroxylamine hydrochloride in presence of ethanol gave the respective esters 4e–h. All the esters were characterised by their spectral data.

Mobile Base Stations Placement and Energy Aware Routing in Wireless Sensor Networks

Increasing network lifetime is important in wireless sensor/ad-hoc networks. In this paper, we are concerned with algorithms to increase network lifetime and amount of data delivered during the lifetime by deploying multiple mobile base stations in the sensor network field. Specifically, we allow multiple mobile base stations to be deployed along the periphery of the sensor network field and develop algorithms to dynamically choose the locations of these base stations so as to improve network lifetime. We propose energy efficient low-complexity algorithms to determine the locations of the base stations; they include i) Top-K-max algorithm, ii) maximizing the minimum residual energy (Max-Min-RE) algorithm, and iii) minimizing the residual energy difference (MinDiff-RE) algorithm. We show that the proposed base stations placement algorithms provide increased network lifetimes and amount of data delivered during the network lifetime compared to single base station scenario as well as multiple static base stations scenario, and close to those obtained by solving an integer linear program (ILP) to determine the locations of the mobile base stations. We also investigate the lifetime gain when an energy aware routing protocol is employed along with multiple base stations.

Formation of rearrangement product in photolysis of α,α-dimethydeoxybenzoin upon cyclodextrin complexation

Solid-state irradiation of cyclodextrin complexes of alpha,alpha-dimethyldeoxybenzoin results in the formation of a significant amount of rearrangement product, 4-isopropylbenzophenone, in addition to cage products. This behavior is not observed in the photolysis in solution or in micellar media.

Optimal polygon placement by translation

Let M be an m-sided simple polygon and N be an n-sided polygon with holes. In this paper we consider the problem of computing the feasible region, i.e., the set of all placements by translation of M so that M lies inside N without intersecting any hole. First we propose an O (mn(2)) time algorithm for computing the feasible region for the case when M is a monotone polygon. Then we consider the general case when M is a simple polygon and propose an O(m(2)n(2)) time algorithm for computing the feasible region. Both algorithms are optimal upto a constant factor.