Potential economic effects of climate change on Finnish agriculture

Selostus: Ilmastonmuutoksen taloudelliset vaikutukset suomalaiseen maatalouteen

A Phase IIB, Randomized, Double-Blind, Multicenter, Immunogenicity Study of Vacc-4x Versus Placebo in HIV-1-infected Patients

Background: Vacc-4x is a peptide-based HIV therapeutic vaccine to conserved domains on p24Gag. Recently conserved 'sectors' on HIV p24, critical for virus viability and thereby immunologically vulnerable have been identified. Elite controllers target immune responses to such regions. The Vacc-4x peptides lie within a number of these conserved sectors of HIV p24. The co-primary endpoints of this study were to compare changes in CD4 counts and return to ART between treatmentand placebo groups during a 24 week treatment interruption. Secondary endpoints included safety, viral load and immunogenicity.Methods: This prospective, randomized, double blind phase IIB clinical study (NCT00659789) was carried out in 13 European and 5 US centers recruiting 135 patients on ART. After 6 immunizations on ART over 28 weeks, treatment was interrupted for up to 24 weeks (to week 52) (Vacc-4x n = 88; placebo n = 38). Immunological analyses (ELISPOT, proliferation, intracellular cytokine staining) were carried out at central laboratories.Results: There were no Vacc-4x-related serious adverse events. Of the 135 patients recruited (male n = 92; female n = 43), 126 patients completed the study. Median prestudy CD4 count was 712 (Vacc-4x) and 619 cells/mm3 (placebo), and median CD4 nadir 300 (Vacc-4x) and 285 cells/mm3 (placebo). There was no statistically significant difference between the two groups regarding change in CD4 counts (p = 0.12) or ART resumption (p = 0.89) during treatment interruption. A statistically significant treatment difference between Vacc-4x and placebo groupsfor viral load (VL) was found for patients who achieved a 6 month ART-free period (p = 0.0022). There was a positive correlation between ELISPOT responses and lower viral load in the Vacc-4x group compared to placebo (p = 0.02). Long-term follow-up of patients up t o week 104 was completed in June 2011.Conclusion: Vacc-4x was found to be safe and well tolerated. TheVacc-4x group experienced a significant reduction in viral load compared to placebo.

Entropy change and magnetocaloric effect in Gd5(SixGe1-x)4

Isothermal magnetization curves up to 23 T have been measured in Gd5Si1.8Ge2.2. We show that the values of the entropy change at the first-order magnetostructural transition, obtained from the Clausius-Clapeyron equation and the Maxwell relation, are coincident, provided the Maxwell relation is evaluated only within the transition region and the maximum applied field is high enough to complete the transition. These values are also in agreement with the entropy change obtained from differential scanning calorimetry. We also show that a simple phenomenological model based on the temperature and field dependence of the magnetization accounts for these results.

Magnetic field induced entropy change and magnetoelasticity in Ni-Mn-Ga alloys

The magnetocaloric effect that originates from the martensitic transition in the ferromagnetic Ni-Mn-Gashape-memory alloy is studied. We show that this effect is controlled by the magnetostructural coupling at boththe martensitic variant and magnetic domain length scales. A large entropy change induced by moderatemagnetic fields is obtained for alloys in which the magnetic moment of the two structural phases is not verydifferent. We also show that this entropy change is not associated with the entropy difference between themartensitic and the parent phase arising from the change in the crystallographic structure which has beenfound to be independent of the magnetic field within this range of fields.

Durable, Cost-Effective Pavement Markings Phase I: Synthesis of Current Reseaech, June 2001

Pavement marking technology is a continually evolving subject. There are numerous types of materials used in the field today, including (but not limited to) paint, epoxy, tape, and thermoplastic. Each material has its own set of unique characteristics related to durability, retroreflectivity, installation cost, and life-cycle cost. The Iowa Highway Research Board was interested in investigating the possibility of developing an ongoing program to evaluate the various products used in pavement marking. This potential program would maintain a database of performance and cost information to assist state and local agencies in determining which materials and placement methods are most appropriate for their use. The Center for Transportation Research and Education at Iowa State University has completed Phase I of this research: to identify the current practice and experiences from around the United States to recommend a further course of action for the State of Iowa. There has been a significant amount of research completed in the last several years. Research from Michigan, Pennsylvania, South Dakota, Ohio, and Alaska all had some common findings: white markings are more retroreflective than yellow markings; paint is by-and-large the least expensive material; paint tends to degrade faster than other materials; thermoplastic and tapes had higher retroreflective characteristics. Perhaps the most significant program going on in the area of pavement markings is the National Transportation Product Evaluation Program (NTPEP). This is an ongoing research program jointly conducted by the American Association of State Highway and Transportation Officials and its member states. Field and lab tests on numerous types of pavement marking materials are being conducted at sites representing four climatological areas. These results are published periodically for use by any jurisdiction interested in pavement marking materials performance. At this time, it is recommended that the State of Iowa not embark on a test deck evaluation program. Instead, close attention should be paid to the ongoing evaluations of the NTPEP program. Materials that fare well on the NTPEP test de cks should be considered for further field studies in Iowa.

Laboratory Performance Evaluation of CIR-Emulsion and it Comparison Against CIR-Form Test Result from Phase II, Final Report TR-578 Phase III, December 2009

Currently, no standard mix design procedure is available for CIR-emulsion in Iowa. The CIR-foam mix design process developed during the previous phase is applied for CIR-emulsion mixtures with varying emulsified asphalt contents. Dynamic modulus test, dynamic creep test, static creep test and raveling test were conducted to evaluate the short- and long-term performance of CIR-emulsion mixtures at various testing temperatures and loading conditions. A potential benefit of this research is a better understanding of CIR-emulsion material properties in comparison with those of CIR-foam material that would allow for the selection of the most appropriate CIR technology and the type and amount of the optimum stabilization material. Dynamic modulus, flow number and flow time of CIR-emulsion mixtures using CSS-h were generally higher than those of HFMS-2p. Flow number and flow time of CIR-emulsion using RAP materials from Story County was higher than those from Clayton County. Flow number and flow time of CIR-emulsion with 0.5% emulsified asphalt was higher than CIR-emulsion with 1.0% or 1.5%. Raveling loss of CIR-emulsion with 1.5% emulsified was significantly less than those with 0.5% and 1.0%. Test results in terms of dynamic modulus, flow number, flow time and raveling loss of CIR-foam mixtures are generally better than those of CIR-emulsion mixtures. Given the limited RAP sources used for this study, it is recommended that the CIR-emulsion mix design procedure should be validated against several RAP sources and emulsion types.

Continuous recording intrarectal pressures during the second phase of labor.

Parameters of intrarectal pressure (surface area under pressure curve and peak pressure) recorded with a microsystem device during the second phase of labor showed no significant correlations with baby's weight or mode of delivery. AIM OF THE STUDY: Was to assess the biomechanical pressures delivered against pelvic floor structures during the second phase of labor in nulliparae women, and to correlate them with obstetrics parameters, i.e. baby'sweight and mode of delivery. MATERIAL: Using a microsystem device placed into the rectum at the beginning of the second phase of labor, two parameters were assessed during the bearing efforts in 59 nulliparae women: the surface area under the pressure curve and the peak pressure. RESULTS: During 11.5±9 bearing efforts of 99.1±16s duration, the mean value of surface area under the pressure curve was 32677±26058cm/s and the mean value of the peak pressure was 60.7±24cmH(2)O, exceeding 100cmH(2)O in 10% of women. These two parameters were not correlated with baby's weight (R: 0.19, P: 0.15 and R: 0.05, P: 0.71). In the same way, these two parameters were not correlated with the mode of delivery (spontaneous or forceps/vacuum-assisted). Furthermore, the individual values of these two parameters showed great variation from one woman to another. CONCLUSION: This study has showed that parameters of biomechanical pressures recorded into the rectum during second phase of labor had no significant correlations with obstetricals parameters, explaining why these latter have poor predicitive value of further pelvic floor problems.

Evaluation de la phase pilote du Dispositif cantonal d'indication et de suivi des personnes toxicodépendantes (DCIST)

Le Dispositif Cantonal d'Indication et de Suivi des personnes Toxicodépendantes (DCIST) s'inscrit dans l'axe numéro 1 de la politique vaudoise concernant la prévention et la lutte contre la toxicodépendance qui vise l'amélioration de l'adéquation entre l'offre de prestations et les besoins des usagers ainsi que dans le Plan Stratégique Vaudois 2011 établi dans le cadre de la reprise par le canton de Vaud des tâches de la Confédération. Le DCIST est un processus organisationnel de travail en réseau appuyé sur des outils standardisés d'évaluation des conditions de vie et de consommation des personnes toxicodépendantes qui a pour objectifs :1. d'ajuster au mieux les prestations proposées au regard des besoins rencontrés par les personnes toxicodépendantes;2. de développer un réseau de soins coordonné : a. améliorer l'efficacité de la prise en charge des personnes toxicodépendantes;b. favoriser le suivi et le maintien de ces personnes dans le réseau social et médical;c. favoriser le continuum dans la prise en charge médicosociale (des structures généralistes, de première ligne, aux institutions résidentielles spécialisées).Le DCIST a donc pour but de renforcer le rôle du canton de Vaud dans le pilotage et la planification des prestations dans le domaine de l'aide aux personnes concernées par la toxicodépendance. Il est indiqué et nécessaire pour toute personne souhaitant entrer dans une structure résidentielle pour des problèmes de toxicodépendance, avec ou sans problématique d'alcool associée.La mise en place du dispositif a été pilotée par les instances suivantes qui se sont réunies à intervalles réguliers : la cellule de projet (les responsables des deux services concernés - SSP et SPASa) et le/la chef-fe de projetb), le groupe de travail (GT) et ses différents sous-groupes et finalement le comité de pilotage (CoPil). Ces deux derniers groupes rassemblaient des professionnels représentatifs des différents secteurs concernés par le DCIST.La phase pilote du DCIST a duré du 1er octobre 2010 au 31 mars 2011. L'objectif de cette phase était d'éprouver les outils, la structure ainsi que les procédures élaborées et d'effectuer les ajustements nécessaires.Durant cette phase pilote, des formations sur la façon d'utiliser les outils du DCIST ont été dispensées aux personnes chargées d'indication dans les structures ou à d'autres collaborateurs intéressés.Des plateformes d'échange ont réuni les personnes concernées des différentes structures (centres d'indication, établissements socio-éducatifs [ESE]) et les responsables du projet. Ces réunions ont permis de faire émerger et d'échanger les points de vue sur les problèmes rencontrés et de discuter de solutions communes. [Auteurs, p. 5]

Transitional effects of a pension system change in Spain

This paper studies the output effects, transition costs and the change in pension benefits derived from the substitution of the current unfunded pension system by a fully funded pension system financed through mandatory savings.These effects are estimated by using reduced versions of the neoclassical and endogenous growth frameworks. Because of the greater capital accumulation during the transition phase, final output increases by 23,6% (neoclassicalframework); and a 24,5-31,5% (endogenous growth framework). The initial revenue loss for the government would represent a 4,8% of the GDP, raising very slowly during the transition period. Given the new growth rates, rates of return ofphysical capital, and financial intermediation costs, we have that the capitalization pension benefits obtained by all 30-contribution-year worker would be more than twice than those that guarantee the financial sustainability of thepublic pension system

Pressure to change and resistance against it: consumer perceptions and acceptance of nutritionally modified foods

Selostus: Muutospaineet ja muutosvastarinta: kuluttajien suhtautuminen ravitsemuksellisesti muunnettuihin elintarvikkeisiin

Feeding levels during the growing phase affect the production of primiparous Finnish Landrace ewes

Selostus: Ruokinnan voimakkuuden vaikutus siitosuuhikaritsan tuotantoon