985 resultados para Optical bias
Resumo:
Report for the scientific sojourn at the Department of Information Technology (INTEC) at the Ghent University, Belgium, from january to june 2007. All-Optical Label Swapping (AOLS) forms a key technology towards the implementation of All-Optical Packet Switching nodes (AOPS) for the future optical Internet. The capital expenditures of the deployment of AOLS increases with the size of the label spaces (i.e. the number of used labels), since a special optical device is needed for each recognized label on every node. Label space sizes are affected by the wayin which demands are routed. For instance, while shortest-path routing leads to the usage of fewer labels but high link utilization, minimum interference routing leads to the opposite. This project studies and proposes All-Optical Label Stacking (AOLStack), which is an extension of the AOLS architecture. AOLStack aims at reducing label spaces while easing the compromise with link utilization. In this project, an Integer Lineal Program is proposed with the objective of analyzing the softening of the aforementioned trade-off due to AOLStack. Furthermore, a heuristic aiming at finding good solutions in polynomial-time is proposed as well. Simulation results show that AOLStack either a) reduces the label spaces with a low increase in the link utilization or, similarly, b) uses better the residual bandwidth to decrease the number of labels even more.
Resumo:
Background : In the present article, we propose an alternative method for dealing with negative affectivity (NA) biases in research, while investigating the association between a deleterious psychosocial environment at work and poor mental health. First, we investigated how strong NA must be to cause an observed correlation between the independent and dependent variables. Second, we subjectively assessed whether NA can have a large enough impact on a large enough number of subjects to invalidate the observed correlations between dependent and independent variables.Methods : We simulated 10,000 populations of 300 subjects each, using the marginal distribution of workers in an actual population that had answered the Siegrist's questionnaire on effort and reward imbalance (ERI) and the General Health Questionnaire (GHQ).Results : The results of the present study suggested that simulated NA has a minimal effect on the mean scores for effort and reward. However, the correlations between the effort and reward imbalance (ERI) ratio and the GHQ score might be important, even in simulated populations with a limited NA.Conclusions : When investigating the relationship between the ERI ratio and the GHQ score, we suggest the following rules for the interpretation of the results: correlations with an explained variance of 5% and below should be considered with caution; correlations with an explained variance between 5% and 10% may result from NA, although this effect does not seem likely; and correlations with an explained variance of 10% and above are not likely to be the result of NA biases. [Authors]
Resumo:
Recent attempts to incorporate optimal fiscal policy into New Keynesian models subject to nominal inertia, have tended to assume that policy makers are benevolent and have access to a commitment technology. A separate literature, on the New Political Economy, has focused on real economies where there is strategic use of policy instruments in a world of political conflict. In this paper we combine these literatures and assume that policy is set in a New Keynesian economy by one of two policy makers facing electoral uncertainty (in terms of infrequent elections and an endogenous voting mechanism). The policy makers generally share the social welfare function, but differ in their preferences over fiscal expenditure (in its size and/or composition). Given the environment, policy shall be realistically constrained to be time-consistent. In a sticky-price economy, such heterogeneity gives rise to the possibility of one policy maker utilising (nominal) debt strategically to tie the hands of the other party, and influence the outcome of any future elections. This can give rise to a deficit bias, implying a sub-optimally high level of steady-state debt, and can also imply a sub-optimal response to shocks. The steady-state distortions and inflation bias this generates, combined with the volatility induced by the electoral cycle in a sticky-price environment, can significantly
Resumo:
New Keynesian models rely heavily on two workhorse models of nominal inertia - price contracts of random duration (Calvo, 1983) and price adjustment costs (Rotemberg, 1982) - to generate a meaningful role for monetary policy. These alternative descriptions of price stickiness are often used interchangeably since, to a first order of approximation they imply an isomorphic Phillips curve and, if the steady-state is efficient, identical objectives for the policy maker and as a result in an LQ framework, the same policy conclusions. In this paper we compute time-consistent optimal monetary policy in bench-mark New Keynesian models containing each form of price stickiness. Using global solution techniques we find that the inflation bias problem under Calvo contracts is significantly greater than under Rotemberg pricing, despite the fact that the former typically significant exhibits far greater welfare costs of inflation. The rates of inflation observed under this policy are non-trivial and suggest that the model can comfortably generate the rates of inflation at which the problematic issues highlighted in the trend inflation literature emerge, as well as the movements in trend inflation emphasized in empirical studies of the evolution of inflation. Finally, we consider the response to cost push shocks across both models and find these can also be significantly different. The choice of which form of nominal inertia to adopt is not innocuous.
Resumo:
This paper analyses intergenerational earnings mobility in Spain correcting for different selection biases. We address the co-residence selection problem by combining information from two samples and using the two-sample two-stage least square estimator. We find a small decrease in elasticity when we move to younger cohorts. Furthermore, we find a higher correlation in the case of daughters than in the case of sons; however, when we consider the employment selection in the case of daughters, by adopting a Heckman-type correction method, the diference between sons and daughters disappears. By decomposing the sources of earnings elasticity across generations, we find that the correlation between child's and father's occupation is the most important component. Finally, quantile regressions estimates show that the influence of the father's earnings is greater when we move to the lower tail of the offspring's earnings distribution, especially in the case of daughters' earnings.
Resumo:
Using a panel of 38 economies, over the period 2001 to 2010, we analyse the link between different facets of education and diversification in international portfolios. We find that university education, mathematical numeracy, in addition to financial skill, play an important role in reducing home bias. After separating countries according to their level of financial development, we find that less developed economies with more university graduates, or with higher level of mathematical numeracy, have lower level of local equity bias compared to more developed countries. We also find that the beneficial effect of education is more pronounced during the most recent financial crisis, especially for economies with less developed financial markets.
Selection bias and unobservable heterogeneity applied at the wage equation of European married women
Resumo:
This paper utilizes a panel data sample selection model to correct the selection in the analysis of longitudinal labor market data for married women in European countries. We estimate the female wage equation in a framework of unbalanced panel data models with sample selection. The wage equations of females have several potential sources of.
Resumo:
Sex-dependent selection often leads to spectacularly different phenotypes in males and females. In species in which sexual dimorphism is not complete, it is unclear which benefits females and males derive from displaying a trait that is typical of the other sex. In barn owls (Tyto alba), females exhibit on average larger black eumelanic spots than males but members of the two sexes display this trait in the same range of possible values. In a 12-year study, we show that selection exerted on spot size directly or on genetically correlated traits strongly favoured females with large spots and weakly favoured males with small spots. Intense directional selection on females caused an increase in spot diameter in the population over the study period. This increase is due to a change in the autosomal genes underlying the expression of eumelanic spots but not of sex-linked genes. Female-like males produced more daughters than sons, while male-like females produced more sons than daughters when mated to a small-spotted male. These sex ratio biases appear adaptive because sons of male-like females and daughters of female-like males had above-average survival. This demonstrates that selection exerted against individuals displaying a trait that is typical of the other sex promoted the evolution of specific life history strategies that enhance their fitness. This may explain why in many organisms sexual dimorphism is often not complete.
Resumo:
This project aims to analyse the kind of questions the teacher asks students in order to encourage them to participate in her classes. Consequently, the researcher has read relevant literature and has analysed a short excerpt of a video recorded during her first practicum. She has also analysed a number of activities carried out during her second practicum in order to find out if she had improved her questioning skills in the classroom
Resumo:
In the investigation of thin films of transition metal nitrides, an essential role is played by the accurate determination of their chemical composition. Actually the chemical composition depends on the deposition parameters and influences the optical properties. These relations are illustrated in thin films of TiNx and (Ti1-yVy)N-x deposited by reactive magnetron sputtering from composite targets of the elements. By variation of the nitrogen partial pressure and the target composition, different samples have been obtained. The chemical composition has been measured by electron probe microanalysis at low irradiation voltages. The optical properties are evaluated by ex-situ ellipsometry. Using the screened Drude model, they are correlated with the differences in composition. Adding vanadium or nitrogen in Ti-N is shown to have the same effect on the optical properties.
Resumo:
We evaluate the performance of different optimization techniques developed in the context of optical flowcomputation with different variational models. In particular, based on truncated Newton methods (TN) that have been an effective approach for large-scale unconstrained optimization, we develop the use of efficient multilevel schemes for computing the optical flow. More precisely, we evaluate the performance of a standard unidirectional multilevel algorithm - called multiresolution optimization (MR/OPT), to a bidrectional multilevel algorithm - called full multigrid optimization (FMG/OPT). The FMG/OPT algorithm treats the coarse grid correction as an optimization search direction and eventually scales it using a line search. Experimental results on different image sequences using four models of optical flow computation show that the FMG/OPT algorithm outperforms both the TN and MR/OPT algorithms in terms of the computational work and the quality of the optical flow estimation.
Resumo:
OBJECTIVE: The purpose of this study was to compare the use of different variables to measure the clinical wear of two denture tooth materials in two analysis centers. METHODS: Twelve edentulous patients were provided with full dentures. Two different denture tooth materials (experimental material and control) were placed randomly in accordance with the split-mouth design. For wear measurements, impressions were made after an adjustment phase of 1-2 weeks and after 6, 12, 18, and 24 months. The occlusal wear of the posterior denture teeth of 11 subjects was assessed in two study centers by use of plaster replicas and 3D laser-scanning methods. In both centers sequential scans of the occlusal surfaces were digitized and superimposed. Wear was described by use of four different variables. Statistical analysis was performed after log-transformation of the wear data by use of the Pearson and Lin correlation and by use of a mixed linear model. RESULTS: Mean occlusal vertical wear of the denture teeth after 24 months was between 120μm and 212μm, depending on wear variable and material. For three of the four variables, wear of the experimental material was statistically significantly less than that of the control. Comparison of the two study centers, however, revealed correlation of the wear variables was only moderate whereas strong correlation was observed among the different wear variables evaluated by each center. SIGNIFICANCE: Moderate correlation was observed for clinical wear measurements by optical 3D laser scanning in two different study centers. For the two denture tooth materials, wear measurements limited to the attrition zones led to the same qualitative assessment.