Assessment of Atomic Data: Problems and Solutions

For the reliable analysis and modeling of astrophysical, laser-produced, and fusion plasmas, atomic data are required for a number of parameters, including energy levels, radiative rates, and electron impact excitation rates. Such data are desired for a range of elements (H to W) and their many ions. However, measurements of atomic data, mainly for radiative and excitation rates, are not feasible for many species, and therefore, calculations are needed. For some ions (such as of C, Fe, and Kr), there is a variety of calculations available in the literature, but often, they differ significantly from one another. Therefore, there is a great demand from the user community to have data "assessed" for accuracy so that they can be confidently applied to the modeling of plasmas. In this paper we highlight the difficulties in assessing atomic data and offer some solutions for improving the accuracy of calculated results.

Design of an automated solar concentrator for the pyrolysis of scrap rubber

An automated solar reactor system was designed and built to carry out catalytic pyrolysis of scrap rubber tires at 550°C. To maximize solar energy concentration, a two degrees-of-freedom automated sun tracking system was developed and implemented. Both the azimuth and zenith angles were controlled via feedback from six photo-resistors positioned on a Fresnel lens. The pyrolysis of rubber tires was tested with the presence of two types of acidic catalysts, H-beta and H-USY. Additionally, a photoactive TiO<inf>2</inf> catalyst was used and the products were compared in terms of gas yields and composition. The catalysts were characterized by BET analysis and the pyrolysis gases and liquids were analyzed using GC-MS. The oil and gas yields were relatively high with the highest gas yield reaching 32.8% with H-beta catalyst while TiO<inf>2</inf> gave the same results as thermal pyrolysis without any catalyst. In the presence of zeolites, the dominant gasoline-like components in the gas were propene and cyclobutene. The TiO<inf>2</inf> and non-catalytic experiments produced a gas containing gasoline-like products of mainly isoprene (76.4% and 88.4% respectively). As for the liquids they were composed of numerous components spread over a wide distribution of C<inf>10</inf> to C<inf>29</inf> hydrocarbons of naphthalene and cyclohexane/ene derivatives.

The white dwarf's carbon fraction as a secondary parameter of Type Ia supernovae

Context. Binary stellar evolution calculations predict thatChandrasekhar-mass carbon/oxygen white dwarfs (WDs) show a radiallyvarying profile for the composition with a carbon depleted core. Manyrecent multi-dimensional simulations of Type Ia supernovae (SNe Ia),however, assume the progenitor WD has a homogeneous chemicalcomposition.
Aims: In this work, we explore the impact ofdifferent initial carbon profiles of the progenitor WD on the explosionphase and on synthetic observables in the Chandrasekhar-mass delayeddetonation model. Spectra and light curves are compared to observationsto judge the validity of the model.
Methods: The explosion phaseis simulated using the finite volume supernova code Leafs, which isextended to treat different compositions of the progenitor WD. Thesynthetic observables are computed with the Monte Carlo radiativetransfer code Artis. Results: Differences in binding energies ofcarbon and oxygen lead to a lower nuclear energy release for carbondepleted material; thus, the burning fronts that develop are weaker andthe total nuclear energy release is smaller. For otherwise identicalconditions, carbon depleted models produce less 56Ni.Comparing different models with similar 56Ni yields showslower kinetic energies in the ejecta for carbon depleted models, butonly small differences in velocity distributions and line velocities inspectra. The light curve width-luminosity relation (WLR) obtained formodels with differing carbon depletion is roughly perpendicular to theobserved WLR, hence the carbon mass fraction is probably only asecondary parameter in the family of SNe Ia.
Tables 3 and 4 are available in electronic form at http://www.aanda.org

A novel TRNSYS type for short-term borehole heat exchanger simulation: B2G model

Models of ground source heat pump (GSHP) systems are used as an aid for the correct design and optimization of the system. For this purpose, it is necessary to develop models which correctly reproduce the dynamic thermal behavior of each component in a short-term basis. Since the borehole heat exchanger (BHE) is one of the main components, special attention should be paid to ensuring a good accuracy on the prediction of the short-term response of the boreholes. The BHE models found in literature which are suitable for short-term simulations usually present high computational costs. In this work, a novel TRNSYS type implementing a borehole-to-ground (B2G) model, developed for modeling the short-term dynamic performance of a BHE with low computational cost, is presented. The model has been validated against experimental data from a GSHP system located at Universitat Politècnica de València, Spain. Validation results show the ability of the model to reproduce the short-term behavior of the borehole, both for a step-test and under normal operating conditions.

Laser-driven x-ray and neutron source development for industrial applications of plasma accelerators

Pulsed beams of energetic x-rays and neutrons from intense laser interactions with solid foils are promising for applications where bright, small emission area sources, capable of multi-modal delivery are ideal. Possible end users of laser-driven multi-modal sources are those requiring advanced non-destructive inspection techniques in industry sectors of high value commerce such as aerospace, nuclear and advanced manufacturing. We report on experimental work that demonstrates multi-modal operation of high power laser-solid interactions for neutron and x-ray beam generation. Measurements and Monte Carlo radiation transport simulations show that neutron yield is increased by a factor ∼2 when a 1 mm copper foil is placed behind a 2 mm lithium foil, compared to using a 2 cm block of lithium only. We explore x-ray generation with a 10 picosecond drive pulse in order to tailor the spectral content for radiography with medium density alloy metals. The impact of using >1 ps pulse duration on laser-accelerated electron beam generation and transport is discussed alongside the optimisation of subsequent bremsstrahlung emission in thin, high atomic number target foils. X-ray spectra are deconvolved from spectrometer measurements and simulation data generated using the GEANT4 Monte Carlo code. We also demonstrate the unique capability of laser-driven x-rays in being able to deliver single pulse high spatial resolution projection imaging of thick metallic objects. Active detector radiographic imaging of industrially relevant sample objects with a 10 ps drive pulse is presented for the first time, demonstrating that features of 200 μm size are resolved when projected at high magnification.

Percursos da física e da energia nucleares na capital portuguesa : ciência, poder e política, 1947-1973

Tese de doutoramento, História e Filosofia das Ciências, Universidade de Lisboa, Faculdade de Ciências, 2014

Argonauta Video Database. Data Agregation

This Database was generated during the development of a computer vision-based system for safety purposes in nuclear plants. The system aims at detecting and tracking people within a nuclear plant. Further details may be found in the related thesis. The research was developed through a cooperation between the Graduate Electrical Engineering Program of Federal University of Rio de Janeiro (PEE/COPPE, UFRJ) and the Nuclear Engineering Institute of National Commission of Nuclear Energy (IEN, CNEN). The experimental part of this research was carried out in Argonauta, a nuclear research reactor belonging to IEN. The Database is made available in the sequel. All the videos are already rectified. The Projection and Homography matrices are given in the end, for both cameras. Please, acknowledge the use of this Database in any publication.

Economics of Hybrid Photovoltaic Power Plants

The global power supply stability is faced to several severe and fundamental threats, in particular steadily increasing power demand, diminishing and degrading fossil and nuclear energy resources, very harmful greenhouse gas emissions, significant energy injustice and a structurally misbalanced ecological footprint. Photovoltaic (PV) power systems are analysed in various aspects focusing on economic and technical considerations of supplemental and substitutional power supply to the constraint conventional power system. To infer the most relevant system approach for PV power plants several solar resources available for PV systems are compared. By combining the different solar resources and respective economics, two major PV systems are identified to be very competitive in almost all regions in the world. The experience curve concept is used as a key technique for the development of scenario assumptions on economic projections for the decade of the 2010s. Main drivers for cost reductions in PV systems are learning and production growth rate, thus several relevant aspects are discussed such as research and development investments, technical PV market potential, different PV technologies and the energetic sustainability of PV. Three major market segments for PV systems are identified: off-grid PV solutions, decentralised small scale on-grid PV systems (several kWp) and large scale PV power plants (tens of MWp). Mainly by application of ‘grid-parity’ and ‘fuel-parity’ concepts per country, local market and conventional power plant basis, the global economic market potential for all major PV system segments is derived. PV power plant hybridization potential of all relevant power technologies and the global power plant structure are analyzed regarding technical, economical and geographical feasibility. Key success criteria for hybrid PV power plants are discussed and comprehensively analysed for all adequate power plant technologies, i.e. oil, gas and coal fired power plants, wind power, solar thermal power (STEG) and hydro power plants. For the 2010s, detailed global demand curves are derived for hybrid PV-Fossil power plants on a per power plant, per country and per fuel type basis. The fundamental technical and economic potentials for hybrid PV-STEG, hybrid PV-Wind and hybrid PV-Hydro power plants are considered. The global resource availability for PV and wind power plants is excellent, thus knowing the competitive or complementary characteristic of hybrid PV-Wind power plants on a local basis is identified as being of utmost relevance. The complementarity of hybrid PV-Wind power plants is confirmed. As a result of that almost no reduction of the global economic PV market potential need to be expected and more complex power system designs on basis of hybrid PV-Wind power plants are feasible. The final target of implementing renewable power technologies into the global power system is a nearly 100% renewable power supply. Besides balancing facilities, storage options are needed, in particular for seasonal power storage. Renewable power methane (RPM) offers respective options. A comprehensive global and local analysis is performed for analysing a hybrid PV-Wind-RPM combined cycle gas turbine power system. Such a power system design might be competitive and could offer solutions for nearly all current energy system constraints including the heating and transportation sector and even the chemical industry. Summing up, hybrid PV power plants become very attractive and PV power systems will very likely evolve together with wind power to the major and final source of energy for mankind.

El Acuerdo de Cooperación Regional para la Promoción de la Ciencia y la Tecnología Nucleares en América Latina y el Caribe "ARCAL" como estrategia de integración regional en América Latina, 2002 - 2007

Partiendo de la idea de que no todos los usos de la Energía Nuclear son bélicos, el análisis de un Acuerdo de vital trascendencia para Latinoamérica tal como lo es el El Acuerdo de Cooperación Regional Para la Promoción de la Ciencia y la Tecnología Nucleares en América Latina y el Caribe (ARCAL) , nos da una visión mas amplia no solo de cuáles son los usos pacíficos de la energía nuclear mas significativos a nivel mundial, sino a demás, de cómo son trascendentales para lograr un desarrollo social y sostenible que resulte en cierto grado de integración regional en América Latina, gracias a los lineamientos propios con los cuales fue creado el Acuerdo.

Condiciones de trabajo y morbilidad percibidas entre mineros de carbón en Guachetá, Colombia

Introducción: En Colombia la investigación sobre condiciones de trabajo y salud en minería carbonífera es escasa y no considera la percepción de la población expuesta y sus comportamientos frente a los riesgos inherentes. Objetivo: Determinar la asociación entre las condiciones de trabajo y morbilidad percibidas entre trabajadores de minas de carbón en Guachetá, Cundinamarca. Materiales y métodos: Se realizó un estudio transversal con 154 trabajadores seleccionados aleatoriamente del total registrado en la alcaldía municipal. Se indagó sobre características sociodemográficas, condiciones de trabajo y salud en las minas. Se estimaron prevalencias de los trastornos respiratorios, osteomusculares y auditivos, y se exploraron las asociaciones entre algunas condiciones de trabajo y los eventos con prevalencia superior a 30% de forma bivariada y múltiple, con regresiones Poisson con varianza robusta. Resultados: Los trabajadores fueron en su mayoría hombres, con edades entre 18 y 77 años de edad. Los problemas de salud más frecuentemente reportados fueron dolor lumbar (46,10%), dolor del miembro superior (40,26%), dolor del miembro inferior (34,42%), trastornos respiratorios (17,53%) y problemas auditivos (13,64%). Existen diferencias importantes en la percepción dependiendo de la antigüedad laboral y las condiciones subterráneas o no del trabajo. Conclusión: Los riesgos más reconocidos por los trabajadores son los relacionados con trastornos osteomusculares, al parecer por ser más evidentes en su cotidianidad. Las acciones en salud ocupacional podrán considerar estos hallazgos en sus planes de prevención de la enfermedad en las minas del carbón colombianas.

Percepción de los trabajadores acerca del sistema de seguridad y salud en el trabajo en un hospital de III nivel, Bogotá-Colombia. 2014.

Objetivo: Evaluar la percepción que tienen los trabajadores acerca del sistema de seguridad y salud en el trabajo en la población asistencial y administrativa en un Hospital de III nivel de atención., Bogotá-Colombia. Materiales y métodos: Estudio de corte transversal en población de trabajadores asistenciales y administrativos. Se aplicó el “Cuestionario Nórdico Sobre Seguridad en el Trabajo NOSACQ 50 Spanish” validado. La muestra fue probabilística estratificada aleatoria, en 308 trabajadores (230 asistenciales y 78 administrativos). Resultados: El promedio de edad fue 39.5± 12 años, con mayor frecuencia de género femenino (74.68%), estado civil soltero (38.96%) y nivel educativo técnico (34.40%). La percepción que tienen los trabajadores acerca del sistema de seguridad y salud en el trabajo fue independiente de su tipo de actividad laboral administrativa y asistencial (p>0.05), la mayor percepción en ambos grupos fue la confianza de los trabajadores en la eficacia del sistema de seguridad (2.71 y 2.77), y las de menor percepción presentaron el empoderamiento de seguridad de gestión (2.35 y 2.46) y la seguridad como prioridad de los empleados y rechazo del riesgo (2.35 y 2.40). Conclusiones: Los trabajadores del Hospital tienen un nivel adecuado de buena percepción acerca de los aspectos de seguridad y salud en el trabajo donde se evidenció que la fortaleza es la confianza de los trabajadores en la eficacia del sistema y la debilidad del sistema se encuentra en la falta de empoderamiento y rechazo al riesgo.

Análisis de la amenaza de Corea del Norte en la modificación de políticas de Seguridad y Defensa de Japón (2003-2013)

La presente investigación tiene como objetivo analizar cómo desde 2003 las acciones militares de Corea de Norte han modificado las políticas de Seguridad y Defensa del Estado japonés, llevándolo a aumentar su poder militar mediante el fortalecimiento de sus fuerzas de auto-defensa. A su vez, se estudiará cómo la amenaza norcoreana ha creado dentro del gobierno nipón la idea de un ejército ofensivo y la utilización de la energía nuclear con fines armamentistas, sin cambiar su objetivo pacifista para la solución de controversias. Se utilizarán las teorías constructivista y de los complejos regionales de seguridad con el fin de ver cómo se fue construyendo la amenaza que hoy representa Corea del Norte a la Seguridad de Japón, y entender las dinámicas en materia de seguridad que se dan entre los dos Estados mencionados.

Use of soft heterocyclic N‑donor ligands to separate actinides and lanthanides

The removal of the most long-lived radiotoxic elements from used nuclear fuel, minor actinides, is foreseen as an essential step toward increasing the public acceptance of nuclear energy as a key component of a low-carbon energy future. Once removed from the remaining used fuel, these elements can be used as fuel in their own right in fast reactors or converted into shorter-lived or stable elements by transmutation prior to geological disposal. The SANEX process is proposed to carry out this selective separation by solvent extraction. Recent efforts to develop reagents capable of separating the radioactive minor actinides from lanthanides as part of a future strategy for the management and reprocessing of used nuclear fuel are reviewed. The current strategies for the reprocessing of PUREX raffinate are summarized, and some guiding principles for the design of actinide-selective reagents are defined. The development and testing of different classes of solvent extraction reagent are then summarized, covering some of the earliest ligand designs right through to the current reagents of choice, bis(1,2,4-triazine) ligands. Finally, we summarize research aimed at developing a fundamental understanding of the underlying reasons for the excellent extraction capabilities and high actinide/lanthanide selectivities shown by this class of ligands and our recent efforts to immobilize these reagents onto solid phases.

‘The European Dream of Franz Josef Strauss’

Franz Josef Strauss, West German Minister of Atomic Energy and Minister of Defence, pursued a project by which European political integration was to be paralleled by co-operation in the field of nuclear energy and indeed nuclear weapons. It has often been alleged that this covered nationalist German ambitions to turn Germany into a nuclear power in its own rights. Seen in the context of his European integration programme - which foundered on the devotion of French President de Gaulle to French national sovereignty - Strauss' overall policy suggests that he did indeed aim not to obtain nuclear weapons for Germany, but for an integrated European superstate.