The performance in context model: A 21st century tertiary dance teaching pedagogy

Despite tertiary institutions acknowledging that reflective practice is an essential component of undergraduate dance teacher training, there is often a disparity between the tertiary students’ reflective skills and the more sophisticated reflective ability needed to navigate the 21st century workforce (Silva 2008). This paper charts the evolution of a dance teaching reflective pedagogy within a suite of three units across a three-year undergraduate dance teacher-training course for school, community and studio dance teachers. This reflective pedagogy based on exploration, collaboration, critical questioning and connections with community forms the basis of a model of tertiary dance teacher- training; the Performance in Context Model (PCM). Over the past four years, through four cycles of action research, the PCM pedagogy, context and engagement with community has developed into a successful model integrating practical dance teaching skills, artistry and community engagement. The PCM represents a holistic collaborative approach to dance teacher education: the marrying of ‘teacher-as-artist’, ‘teacher-as-performer’ and ‘teacher-as-researcher’. More specifically, it emphasises the need for mature, reflective, receptive and flexible approaches in response to dance teaching and learning. These are enacted in a variety of contexts, with tertiary dance teaching students identifying as teaching artists, as well as researchers of their own practice.

Surveillance of Surgical Site Infections following Major Hip and Knee Surgery in Finland

Background and aims. Since 1999, hospitals in the Finnish Hospital Infection Program (SIRO) have reported data on surgical site infections (SSI) following major hip and knee surgery. The purpose of this study was to obtain detailed information to support prevention efforts by analyzing SIRO data on SSIs, to evaluate possible factors affecting the surveillance results, and to assess the disease burden of postoperative prosthetic joint infections in Finland. Methods. Procedures under surveillance included total hip (THA) and total knee arthroplasties (TKA), and the open reduction and internal fixation (ORIF) of femur fractures. Hospitals prospectively collected data using common definitions and written protocol, and also performed postdischarge surveillance. In the validation study, a blinded retrospective chart review was performed and infection control nurses were interviewed. Patient charts of deep incisional and organ/space SSIs were reviewed, and data from three sources (SIRO, the Finnish Arthroplasty Register, and the Finnish Patient Insurance Centre) were linked for capture-recapture analyses. Results. During 1999-2002, the overall SSI rate was 3.3% after 11,812 orthopedic procedures (median length of stay, eight days). Of all SSIs, 56% were detected after discharge. The majority of deep incisional and organ/space SSIs (65/108, 60%) were detected on readmission. Positive and negative predictive values, sensitivity, and specificity for SIRO surveillance were 94% (95% CI, 89-99%), 99% (99-100%), 75% (56-93%), and 100% (97-100%), respectively. Of the 9,831 total joint replacements performed during 2001-2004, 7.2% (THA 5.2% and TKA 9.9%) of the implants were inserted in a simultaneous bilateral operation. Patients who underwent bilateral operations were younger, healthier, and more often males than those who underwent unilateral procedures. The rates of deep SSIs or mortality did not differ between bi- and uni-lateral THAs or TKAs. Four deep SSIs were reported following bilateral operations (antimicrobial prophylaxis administered 48-218 minutes before incision). In the three registers, altogether 129 prosthetic joint infections were identified after 13,482 THA and TKA during 1999-2004. After correction with the positive predictive value of SIRO (91%), a log-linear model provided an estimated overall prosthetic joint infection rate of 1.6% after THA and 1.3% after TKA. The sensitivity of the SIRO surveillance ranged from 36% to 57%. According to the estimation, nearly 200 prosthetic joint infections could occur in Finland each year (the average from 1999 to 2004) after THA and TKA. Conclusions. Postdischarge surveillance had a major impact on SSI rates after major hip and knee surgery. A minority of deep incisional and organ/space SSIs would be missed, however, if postdischarge surveillance by questionnaire was not performed. According to the validation study, most SSIs reported to SIRO were true infections. Some SSIs were missed, revealing some weakness in case finding. Variation in diagnostic practices may also affect SSI rates. No differences were found in deep SSI rates or mortality between bi- and unilateral THA and TKA. However, patient materials between these two groups differed. Bilateral operations require specific attention paid to their antimicrobial prophylaxis as well as to data management in the surveillance database. The true disease burden of prosthetic joint infections may be heavier than the rates from national nosocomial surveillance systems usually suggest.

Mulibrey nanism : Clinical characteristics and pathophysiologic features of growth restriction, insulin resistance and tumour development

Background: Mulibrey nanism (MUL; Muscle-liver-brain-eye nanism; OMIM 253250) is an autosomal recessive growth disorder more prevalent in Finland than elsewhere in the world. Clinical characteristics include severe prenatal onset growth restriction, cardiopathy, multiple organ manifestations but no major neurological handicap. MUL is caused by mutations in the TRIM37 gene on chromosome 17q22-23, encoding a peroxisomal protein TRIM37 with ubiquitin E3-ligase activity. Nineteen different mutations have been detected, four of them present in the Finnish patients. Objective: This study aimed to characterize clinical and histopathological features of MUL in the national cohort of Finnish patients. Patients and methods: A total of 92 Finnish patients (age 0.7 to 77 years) participated in the clinical follow-up study. Patients hospital records and growth charts were reviewed. Physical, radiographic and laboratory examinations were performed according to a clinical protocol. Thirty patients (18 females) were treated with recombinant human GH for a median period of 5.7 years. Biopsies and autopsy samples were used for the histopathological and immunohistochemical analyses. Results: MUL patients were born small for gestational age (SGA) with immature craniofacial features after prenatal-onset growth restriction. They experienced a continuous deceleration in both height SDS and weight-for-height (WFH) postnatally. In infancy feeding difficulties and frequent pneumonias were common problems. At the time of diagnosis (median age 2.1 years) characteristic craniofacial, radiological and ocular features were the most constant findings. MUL patients showed a dramatic change in glucose metabolism with increasing age. While the children had low fasting glucose and insulin levels, 90% of the adults were insulin resistant, half had type 2 diabetes and an additional 42% showed impaired glucose tolerance (IGT). Seventy percent fulfilled the National Cholesterol Education Program (NCEP) Adult Treatment Panel III criteria for metabolic syndrome as adults. GH therapy improved pre-pubertal growth but had only minor impact on adult height (+5 cm). Interestingly, treated subjects were slimmer and had less frequent metabolic concerns as young adults. MUL patients displayed histologically a disturbed architecture with ectopic tissues and a high frequency of both benign and malignant tumours present in several internal organs. A total of 232 tumorous lesions were detected in our patient cohort. The majority of the tumours showed strong expression of endothelial cell marker CD34 as well as α-smooth muscle actin (α-SMA). Fifteen of the tumours were malignant and seven of them (five Wilms tumours) occurred in the kidney. Conclusions: MUL patients present a distinct postnatal growth pattern. Short-term response of GH treatment is substantial but the long-term impact remains modest. Although MUL patients form a distinct clinical and diagnostic entity, their clinical findings vary considerably from infancy to adulthood. While failure to thrive dominates early life, MUL adults develop metabolic syndrome and have a tendency for malignancies and vascular lesions in several organs. This speaks for a central role of TRIM37 in regulation of key cellular functions, such as proliferation, migration, angiogenesis and insulin signalling.

Healthcare-Associated Infections in Pediatrics

Healthcare-associated infections (HAIs) are known to increase the risk for patient morbidity and mortality in different healthcare settings and thereby to cause additional costs. HAIs typically affect patients with severe underlying conditions. HAIs are prevalent also among pediatric patients, but the distribution of the types of infection and the causative agents differ from those detected in adults. The aim of this study was to obtain information on pediatric HAIs in Finland through an assessment of the surveillance of bloodstream infections (BSIs), through two outbreak investigations in a neonatal intensive care unit (NICU), and through a study of postoperative HAIs after open-heart surgery. The studies were carried out at the Hospital for Children and Adolescents of Helsinki University Central Hospital. Epidemiological features of pediatric BSIs were assessed. For the outbreak investigations, case definitions were set and data collected from microbiological and clinical records. The antimicrobial susceptibilities of the Serratia marcescens and the Candida parapsilosis isolates were determined and they were genotyped. Patient charts were reviewed for the case-control and cohort studies during the outbreak investigations, as well as for the patients who acquired surgical site infections (SSIs) after having undergone open-heart surgery. Also a prospective postdischarge study was conducted to detect postoperative HAIs in these patients. During 1999-2006, the overall annual BSI rate was 1.6/1,000 patient days (range by year, 1.2–2.1). High rates (average, 4.9 and 3.2 BSIs/1,000 patient days) were detected in hematology and neonatology units. Coagulase-negative staphylococci were the most common pathogens both hospital-wide and in each patient group. The overall mortality was 5%. The genotyping of the 15 S. marcescens isolates revealed three independent clusters. All of the 26 C. parapsilosis isolates studied proved to be indistinguishable. The NICU was overcrowded during the S. marcescens clusters. A negative correlation between C. parapsilosis BSIs and fluconazole use in the NICU was detected, and the isolates derived from a single initially susceptible strain became less susceptible to fluconazole over time. Eighty postoperative HAIs, including all severe infections, were detected during hospitalization after open-heart surgery; 34% of those HAIs were SSIs and 25% were BSIs. The postdischarge study found 65 infections that were likely to be associated with hospitalization. The majority (89%) of them were viral respiratory or gastrointestinal infections, and these often led to rehospitalizations. The annual hospital-wide BSI rates were stable, and the significant variation detected in some units could not be seen in overall rates. Further studies with data adequately adjusted for risk factors are needed to assess BSI rates in the patient groups with the highest rates (hematology, neonatology). The outbreak investigations showed that horizontal transmission was common in the NICU. Overcrowding and lapses in hand hygiene probably contributed to the spreading of the pathogens. Following long-term use of fluconazole in the NICU, resistance to fluconazole developed in C. parapsilosis. Almost one-fourth of the patients who underwent open-heart surgery acquired at least one HAI. All severe HAIs were detected during hospitalization. The postdischarge study found numerous viral infections, which often caused rehospitalization.

Optimum design of cantilever sheet pile walls in sandy soils using inverse reliability approach

In this paper an approach for obtaining depth and section modulus of the cantilever sheet pile wall using inverse reliability method is described. The proposed procedure employs inverse first order reliability method to obtain the design penetration depth and section modulus of the steel sheet pile wall in order that the reliability of the wall against failure modes must meet a desired level of safety. Sensitivity analysis is conducted to assess the effect of uncertainties in design parameters on the reliability of cantilever sheet pile walls. The analysis is performed by treating back fill soil properties, depth of the water table from the top of the sheet pile wall, yield strength of steel and section modulus of steel pile as random variables. Two limit states, viz., rotational and flexural failure of sheet pile wall are considered. The results using this approach are used to develop a set of reliability based design charts for different coefficients of variation of friction angle of the backfill (5%, 10% and 15%). System reliability considerations in terms of series and parallel systems are also studied.

Target reliability based design optimization of anchored cantilever sheet pile walls

In this study, the stability of anchored cantilever sheet pile wall in sandy soils is investigated using reliability analysis. Targeted stability is formulated as an optimization problem in the framework of an inverse first order reliability method. A sensitivity analysis is conducted to investigate the effect of parameters influencing the stability of sheet pile wall. Backfill soil properties, soil - steel pile interface friction angle, depth of the water table from the top of the sheet pile wall, total depth of embedment below the dredge line, yield strength of steel, section modulus of steel sheet pile, and anchor pull are all treated as random variables. The sheet pile wall system is modeled as a series of failure mode combination. Penetration depth, anchor pull, and section modulus are calculated for various target component and system reliability indices based on three limit states. These are: rotational failure about the position of the anchor rod, expressed in terms of moment ratio; sliding failure mode, expressed in terms of force ratio; and flexural failure of the steel sheet pile wall, expressed in terms of the section modulus ratio. An attempt is made to propose reliability based design charts considering the failure criteria as well as the variability in the parameters. The results of the study are compared with studies in the literature.

Neighborhood Shopkeepers in Contemporary South Korea: Household, Work, and Locality

This is an ethnographic study of the lived worlds of the keepers of small shops in a residential neighborhood in Seoul, South Korea. It outlines, discusses, and analyses the categories and conceptualizations of South Korean capitalism at the level of households, neighborhoods, and Korean society. These cultural categories were investigated through the neighborhood shopkeepers practices of work and reciprocal interaction as well as through the shopkeepers articulations of their lived experience. In South Korea, the keepers of small businesses have continued to be a large occupational category despite of societal and economic changes, occupying approximately one fourth of the population in active work force. In spite of that, these people, their livelihoods and their cultural and social worlds have rarely been in the focus of social science inquiry. The ethnographic field research for this study was conducted during a 14-month period between November 1998 and December 1999 and in three subsequent short visits to Korea and to the research neighborhood. The fieldwork was conducted during the aftermath of the Asian currency crisis, colloquially termed at the time as the IMF crisis, which highlighted the social and cultural circumstances of small businesskeeper in a specific way. The livelihoods of small-scale entrepreneurs became even more precarious than before; self-employment became an involuntary choice for many middle-class salaried employees who were laid off; and the cultural categories and concepts of society and economy South Korean capitalism were articulated more sharply than before. This study begins with an overview of the contemporary setting, the Korean society under the socially and economically painful outcomes of the economic crisis, and continues with an overview of relevant literature. After introducing the research area and the informants, I discuss the Korean notion of neighborhood, which incorporates both the notions of culturally valued Koreanness and deficiency in the sense of modernity and development. This study further analyses the ways in which the businesskeepers appropriate and reproduce the Korean ideas of men s and women s gender roles and spheres of work. As the appropriation of children s labor is conditional to intergenerational family trajectories which aim not to reproduce parents occupational status but to gain entry to salaried occupations via educational credentials, the work of a married couple is the most common organization of work in small businesses, to which the Korean ideas of family and kin continuity are not applied. While the lack of generational businesskeeping succession suggests that the proprietors mainly subscribe to the notions of familial status that emanate from the practices of the white-collar middle class, the cases of certain women shopkeepers show that their proprietorship and the ensuing economic standing in the family prompts and invites inversed interpretations and uses of common cultural notions of gender. After discussing and analyzing the concept of money and the cultural categorization of leisure and work, topics that emerged as very significant in the lived world of the shopkeepers, this study charts and analyses the categories of identification which the shopkeepers employ for their cultural and social locations and identities. Particular attention is paid to the idea of ordinary people (seomin), which shopkeepers are commonly considered to be most representative of, and which also sums up the ambivalence of neighborhood shopkeepers as a social category: they are not committed to familial reproduction and continuity of the business but aspire non-entrepreneurial careers for their children, while they occupy a significant position in the elaborations of culturally valued notions and ideologies defining Koreanness such as warmheartedness and sociability.

Correlation of thermodynamic properties of chloromethanes

A correlation for entropy and enthalpy based on the two-parameter law of corresponding states and the reference substance concept has been obtained. For 199 points tested, the over-all average absolute deviation and the maximum deviations in the calculated values of entropy with the available data are 0.74 and 7.20%. The corresponding deviations of enthalpy are 1.86 and 15.0%, respectively. A compressibility chart for chloromethanes has been made and shown to be superior to existing charts. For 102 points tested, the average absolute and maximum deviations in the compressibilities were 1.80 and 19.5%, respectively.

Didactical reconstructions for organizing knowledge in physics teacher education

Physics teachers are in a key position to form the attitudes and conceptions of future generations toward science and technology, as well as to educate future generations of scientists. Therefore, good teacher education is one of the key areas of physics departments education program. This dissertation is a contribution to the research-based development of high quality physics teacher education, designed to meet three central challenges of good teaching. The first challenge relates to the organization of physics content knowledge. The second challenge, connected to the first one, is to understand the role of experiments and models in (re)constructing the content knowledge of physics for purposes of teaching. The third challenge is to provide for pre-service physics teachers opportunities and resources for reflecting on or assessing their knowledge and experience about physics and physics education. This dissertation demonstrates how these challenges can be met when the content knowledge of physics, the relevant epistemological aspects of physics and the pedagogical knowledge of teaching and learning physics are combined. The theoretical part of this dissertation is concerned with designing two didactical reconstructions for purposes of physics teacher education: the didactical reconstruction of processes (DRoP) and the didactical reconstruction of structures (DRoS). This part starts with taking into account the required professional competencies of physics teachers, the pedagogical aspects of teaching and learning, and the benefits of the graphical ways of representing knowledge. Then it continues with the conceptual and philosophical analysis of physics, especially with the analysis of experiments and models role in constructing knowledge. This analysis is condensed in the form of the epistemological reconstruction of knowledge justification. Finally, these two parts are combined in the designing and production of the DRoP and DRoS. The DRoP captures the knowledge formation of physical concepts and laws in concise and simplified form while still retaining authenticity from the processes of how concepts have been formed. The DRoS is used for representing the structural knowledge of physics, the connections between physical concepts, quantities and laws, to varying extents. Both DRoP and DRoS are represented in graphical form by means of flow charts consisting of nodes and directed links connecting the nodes. The empirical part discusses two case studies that show how the three challenges are met through the use of DRoP and DRoS and how the outcomes of teaching solutions based on them are evaluated. The research approach is qualitative; it aims at the in-depth evaluation and understanding about the usefulness of the didactical reconstructions. The data, which were collected from the advanced course for prospective physics teachers during 20012006, consisted of DRoP and DRoS flow charts made by students and student interviews. The first case study discusses how student teachers used DRoP flow charts to understand the process of forming knowledge about the law of electromagnetic induction. The second case study discusses how student teachers learned to understand the development of physical quantities as related to the temperature concept by using DRoS flow charts. In both studies, the attention is focused on the use of DRoP and DRoS to organize knowledge and on the role of experiments and models in this organization process. The results show that students understanding about physics knowledge production improved and their knowledge became more organized and coherent. It is shown that the flow charts and the didactical reconstructions behind them had an important role in gaining these positive learning results. On the basis of the results reported here, the designed learning tools have been adopted as a standard part of the teaching solutions used in the physics teacher education courses in the Department of Physics, University of Helsinki.

Analysis of the performance characteristics of a two-inertia power transmission system with a plate clutch

The performance of a plate clutch in a two-inertia power transmission system is analysed assuming negligible compliance and using a piecewise linear function to represent the clutch torque characteristic. Expressions defining, for all linear segments of the clutch torque characteristic, dimensionless input and output velocities of the clutch and dimensionless slip period are presented. The use of these expressions in preparing design charts to aid analysis and design of the plate clutch is outlined.

An Eventful Synthetic Approach Towards the Biologically Potent Natural Product Ottelione A: Enantio-, Regio- and Stereoselective Construction of the Bicyclic Core

A novel synthetic approach towards the recently reported anti-tumor and anti-tuberculor natural product ottelione A from the readily available Diels-Alder adduct of cyclopentadiene and p-benzoquinone is delineated. Our short strategy, besides being enantio-, regio- and stereoselective, charts an eventful course and is inherently well-suited for adaptation towards diverse synthetic analogues of this biologically potent natural product.

Pocket Statistics 2011

A compact selection of statistics on the social security programmes administered by the Kela. Including both tables and charts, the Pocket statistics presents key data on the benefits provided by the Kela, supplemented by selected data about programmes administered by other organizations. Most of the data is updated to the end of 2010, with some of the presentations extending into 2011.

Analysis of heat and mass transfer during bulk hydraircooling of spherical food products

Hydraircooling is a technique used for precooling food products. In this technique chilled water is sprayed over the food products while cold unsaturated air is blown over them. Hydraircooling combines the advantages of both air- and hydrocooling. The present study is concerned with the analysis of bulk hydraircooling as it occurs in a package filled with several layers of spherical food products with chilled water sprayed from the top and cold unsaturated air blown from the bottom. A mathematical model is developed to describe the hydrodynamics and simultaneous heat and mass transfer occurring inside the package. The non-dimensional governing equations are solved using the finite difference numerical methods. The results are presented in the form of time-temperature charts. A correlation is obtained to calculate the process time in terms of the process parameters.

Passive pressure coefficients, critical failure surface and its kinematic admissibility

Using a combination of a logarithmic spiral and a straight line as a failure surface, comprehensive charts have been developed to determine the passive earth pressure coefficients and the positions of the critical failure surface for positive as well as negative wall friction angles. Translational movement of the wall has been examined in detail, considering the soil as either an associated flow dilatant material or a non-dilatant material, to determine the kinematic admissibility of the limit equilibrium solutions.

Exergetic analysis of carbon dioxide vapour compression refrigeration cycle using the new fundamental equation of state

The purpose of this paper is to present exergy charts for carbon dioxide (CO2) based on the new fundamental equation of state and the results of a thermodynamic analysis of conventional and trans-critical vapour compression refrigeration cycles using the data thereof. The calculation scheme is anchored on the Mathematica platform. There exist upper and lower bounds for the high cycle pressure for a given set of evaporating and pre-throttling temperatures. The maximum possible exergetic efficiency for each case was determined. Empirical correlations for exergetic efficiency and COP, valid in the range of temperatures studied here, are obtained. The exergy losses have been quantified. (C) 2003 Elsevier Ltd. All rights reserved.