Reconfigurable photonic logic architecture

The amorphous silicon photo-sensor studied in this thesis, is a double pin structure (p(a-SiC:H)-i’(a-SiC:H)-n(a-SiC:H)-p(a-SiC:H)-i(a-Si:H)-n(a-Si:H)) sandwiched between two transparent contacts deposited over transparent glass thus with the possibility of illumination on both sides, responding to wave-lengths from the ultra-violet, visible to the near infrared range. The frontal il-lumination surface, glass side, is used for light signal inputs. Both surfaces are used for optical bias, which changes the dynamic characteristics of the photo-sensor resulting in different outputs for the same input. Experimental studies were made with the photo-sensor to evaluate its applicability in multiplexing and demultiplexing several data communication channels. The digital light sig-nal was defined to implement simple logical operations like the NOT, AND, OR, and complex like the XOR, MAJ, full-adder and memory effect. A pro-grammable pattern emission system was built and also those for the validation and recovery of the obtained signals. This photo-sensor has applications in op-tical communications with several wavelengths, as a wavelength detector and to execute directly logical operations over digital light input signals.

An agent based architecture to support monitoring in plug and produce manufacturing systems using knowledge extraction

In recent years a set of production paradigms were proposed in order to capacitate manufacturers to meet the new market requirements, such as the shift in demand for highly customized products resulting in a shorter product life cycle, rather than the traditional mass production standardized consumables. These new paradigms advocate solutions capable of facing these requirements, empowering manufacturing systems with a high capacity to adapt along with elevated flexibility and robustness in order to deal with disturbances, like unexpected orders or malfunctions. Evolvable Production Systems propose a solution based on the usage of modularity and self-organization with a fine granularity level, supporting pluggability and in this way allowing companies to add and/or remove components during execution without any extra re-programming effort. However, current monitoring software was not designed to fully support these characteristics, being commonly based on centralized SCADA systems, incapable of re-adapting during execution to the unexpected plugging/unplugging of devices nor changes in the entire system’s topology. Considering these aspects, the work developed for this thesis encompasses a fully distributed agent-based architecture, capable of performing knowledge extraction at different levels of abstraction without sacrificing the capacity to add and/or remove monitoring entities, responsible for data extraction and analysis, during runtime.

Architecture and mosaics in recently discovered Palaeochristian basilicas

The excavations of the Dericik Early Christian Basilicas revealed the importance of the surrounding area of Bursa for understanding Early Christianity between the Late Roman and Early Byzantine periods. In the salvage excavations of 2001, the basic plan of the basilica (nave, narthex, presbyterium and apse) was revealed. The most important artefacts uncovered in that year were the mosaic pavements with geometric and plant ornaments and a grave located in the North Eastern corner of the church. The mosaic of the basilica was laid with the opus tessellatum technique on a thick mortar foundation with white, red, yellow, olive green and dark blue tesserae. A refrigerium scene is represented in the middle of the narthex mosaic. The mosaic in the centre of the nave is divided into parts, one of which with figures of birds inside octagons. In the transitional area between the nave and apse, three heavily damaged inscriptions have been conserved each of three or four lines, one of them indicating the wish of Epituchanos, diakôn, a church member.

Portuguese plain architecture: history opening a closed sequence

The paper will address George Kubler’s Portuguese Plain Architecture [PPA] (1972) and its effect in Portuguese architectural practice. Kubler’s philosophy of art history implied that closed sequences of objects could be opened by several reasons. Thus, it will be argued that there is an effect upon Portuguese architecture post 1974, that is apparent by the reemergence of some of the form classes treated by Kubler. This was mostly achieved through the popularity of Kubler’s book within architectural practice, scholarship and moreover by the establishment of the term “Plain Architecture” in portuguese architectural vocabulary. Plain Architecture of the seventeenth and eighteenth centuries shared some qualities with the architecture to be built in post‑revolutionary Portugal, most importantly the effect that could be achieved with low budget buildings that were responding to a situation of crisis, and simultaneously exhaled aristocratic sparsity. The connection of PPA with the ideological attributes of early modernism and the political context of the time catalysed the reemergence of a new order of Portuguese Plain that resonates still in contemporary architecture.

Recensão: Michelangelo Sabatino, "Pride in Modesty: Modernist Architecture and the Vernacular Tradition in Italy"

Recensão de: Michelangelo Sabatino, "Pride in Modesty: Modernist Architecture and the Vernacular Tradition in Italy", Toronto: University of Toronto Press, 2011

In Search of the Origins of Modernism: Venice and the Crisis of Classical Architecture in the mid-eighteenth century

This paper attempts to prove that in the years 1735 to 1755 Venice was the birthplace and cradle of Modern architectural theory, generating a major crisis in classical architecture traditionally based on the Vitruvian assumption that it imitates early wooden structures in stone or in marble. According to its rationalist critics such as the Venetian Observant Franciscan friar and architectural theorist Carlo Lodoli (1690-1761) and his nineteenth-century followers, classical architecture is singularly deceptive and not true to the nature of materials, in other words, dishonest and fallacious. This questioning did not emanate from practising architects, but from Lodoli himself– a philosopher and educator of the Venetian patriciate – who had not been trained as an architect. The roots of this crisis lay in a new approach to architecture stemming from the new rationalist philosophy of the Enlightenment age with its emphasis on reason and universal criticism.

Semantic architecture for sensors

Based on the report for the unit “Sociology of New Information Technologies” of the Master on Computer Sciences at FCT/University Nova Lisbon in 2015-16. The responsible of this curricular unit is Prof. António Moniz

A novel architecture of a bidirectional bridgeless interleaved converter for EV battery chargers

This paper presents a novel architecture of a bidirectional bridgeless interleaved converter for battery chargers of electric vehicles (EVs). The proposed converter is composed by two power stages: an ac-dc converter that is used to interface the power grid and the dc-link, and a dc-dc converter that is used to interface the dc-link and the batteries. The ac-dc converter is an interleaved bridgeless bidirectional boost-type converter and the dc-dc converter is a bidirectional buck-boost-type converter. The proposed converter works with sinusoidal grid current and with high power factor for all operating power levels, and in both grid-to-vehicle (G2V) and vehicle-to-grid (V2G) operation modes. In the paper is described in detail the proposed converter for EV battery chargers: the circuit topology, the principle of operation, the power control theory, and the current control strategy. Several simulation results for both G2V and V2G operation modes are presented.

Affordable prefabricated modular houses using cement and polymer based materials and advanced design tools

By taking advantage of the appropriate use of cement and polymer based materials and advanced computational tools, a pre-fabricated affordable house was built in a modular system. Modular system refers to the complete structure that is built-up by assembling pre-fabricated sandwich panels composed of steel fibre reinforced self-compacting concrete (SFRSCC) outer layers that are connected by innovative glass fibre reinforced polymer (GFRP) connectors, resulting in a panel with adequate structural, acoustic, and thermal insulation properties. The modular house was prepared for a typical family of six members, but its living area can be easily increased by assembling other pre-fabricated elements. The speed of construction and the cost of the constructive elements make these houses competitive when compared to traditional solutions. In this paper the relevant research subjacent to this project (LEGOUSE) is briefly described, as well as the construction process of the built real scale prototype.

The domestic architecture of Bracara Augusta and its evolution

The excavations carried out under the rescue “Project of Bracara Augusta” have generated significant amounts of data that enabled the reconstruction of Bracara Augusta urban evolution and the characterization of its buildings and blocks. This paper aims to enhance the existing data related with the domestic architecture of the roman town, which was mainly represented by the houses of domus type.

Generating timed trajectories foran autonomous robot

Tese de Doutoramento Programa Doutoral em Engenharia Electrónica e Computadores

Engineering modular viral scaffolds for targeted bacterial population editing

Bacteria are central to human health and disease, but existing tools to edit microbial consortia are limited. For example, broad-spectrum antibiotics are unable to precisely manipulate bacterial communities. Bacteriophages can provide highly specific targeting of bacteria, but assembling well-defined phage cocktails solely with natural phages can be a time-, labor- and cost-intensive process. Here, we present a synthetic biology strategy to modulate phage host ranges by engineering phage genomes in Saccharomyces cerevisiae. We used this technology to redirect Escherichia coli phage scaffolds to target pathogenic Yersinia and Klebsiella bacteria, and conversely, Klebsiella phage scaffolds to target E. coli by modular swapping of phage tail components. The synthetic phages achieved efficient killing of their new target bacteria and were used to selectively remove bacteria from multi-species bacterial communities with cocktails based on common viral scaffolds. We envision this approach accelerating phage biology studies and enabling new technologies for bacterial population editing.

Different module placements in a modular façade system for natural ventilation

Nowadays natural ventilation has gained prominence because its correct use can reduce energy consumption for cooling systems and improve thermal comfort among users. In this paper, we report on the modelling initiative, based on the wind tunnel tests that were carried out for the determination of the influence of natural ventilation in buildings. Indeed, the renewal of air in a closed environment without using an air conditioning system with mechanical elements can lead to energy savings and, in addition, provide air quality.The wind tunnel tests were carried out by varying the positioning of six ventilation modules in the façade system configuration. The modules were positioned below the window-sill (ventilated window-sill) as well as separately above and below the façade. The wind speed measurements were taken inside and outside the model for the different façades configurations to evaluate the best performance in relation to natural ventilation. The results supported the positioning of the six ventilation modules below the window-sill, forming a â ventilated window-sillâ as the most effective natural ventilation solution.

Study of natural ventilation for a modular façade system in wind tunnel tests

Wind tunnel tests are a reliable tool to determine the effect of natural ventilation on buildings. This paper presents results of wind tunnel tests conducted to evaluate the influence of ventilation modules positioning on a façade system. Modules positioning was modified, resulting in different façade configurations. The tests were carried out with the use of a model, varying the position of the ventilation modules in the façade configuration. The cases tested were six ventilation modules positioned below the window-sill (ventilated window-sill), and three ventilation modules positioned above and below the façade. The façade system proposed was movable and interchangeable so that the same basic model could be used to test the possibilities for ventilation. Wind speed measurements were taken inside and outside the model for the different façades configurations to evaluate the best performance in relation to natural ventilation. Singleâ sided and Cross ventilation were considered for wind speed measurements. Results show the use of six ventilation modules positioned below the window-sill, forming "a ventilated window-sill" is the best solution in terms of natural ventilation.

Design modular: Solução sustentável aplicada aos resíduos limpos na indústria do couro

ISSN 19820941