High temperature time-dependent low cycle fatigue behaviour of a type 316L(N) stainless steel

Total strain controlled low cycle fatigue tests on 316L(N) stainless steel have been conducted in air at various strain rates in the temperature range of 773-873 K to identify the operative time-dependent mechanisms and to understand their influence on the cyclic deformation and fracture behaviour of the alloy. The cyclic stress response at all the testing conditions was marked by an initial hardening followed by stress saturation. A negative strain rate stress response is observed under specific testing conditions which is attributed to dynamic strain ageing (DSA). Transmission electron microscopy studies reveal that there is an increase in the dislocation density and enhanced slip planarity in the DSA regime. Fatigue life is found to decrease with a decrease in strain rate. The degradation in fatigue resistance is attributed to the detrimental effects associated with DSA and oxidation. Quantitative measurement of secondary cracks indicate that both transgranular and intergranular cracking are accelerated predominantly under conditions conducive to DSA.

Impedance-fatigue correlated studies on SrBi2Ta2O9

Ceramic samples of SrBi2Ta2O9 (SBT) were prepared by the solid state reaction method with a view to study their electrical properties. Reasons as to why SBT shows better fatigue endurance than conventional perovskites like Pb(Zr, Ti)O-3 are looked into. Complex impedance spectroscopy (CIS) was used as a tool to do so. CIS data was acquired over the temperature range from room temperature to 500 degrees C over a wide range of frequencies. Electrical conductivity data indicates that the conductivity in SBT is essentially due to oxygen vacancies and the activation energy for conduction in the high temperature region was found to be 0.95 eV. CIS was used to separate out the bulk and the interfacial contributions to complex impedance.

Predictors of mental health in midlife and older Australian women: A multilevel investigation

The purpose of this article is to examine the factors associated with women's mental health. A random sample of 340 Australian women aged 40–55 completed surveys on menopausal and lifestyle factors and mental health at three time points. We used hierarchical models to show that decrements in mental health were associated with a corresponding increase in some midlife symptoms (p < .01), time (p < .01), and poor physical health (p < .01), but the effect was not permanent. In older women, mental health was associated with physical functioning, climacteric symptoms, and time, while individual variations in mental health score were largely explained by lifestyle factors.

How does calcification influence plaque vulnerability? Insights from fatigue analysis

Background Calcification is commonly believed to be associated with cardiovascular disease burden. But whether or not the calcifications have a negative effect on plaque vulnerability is still under debate. Methods and Results Fatigue rupture analysis and the fatigue life were used to evaluate the rupture risk. An idealized baseline model containing no calcification was first built. Based on the baseline model, we investigated the influence of calcification on rupture path and fatigue life by adding a circular calcification and changing its location within the fibrous cap area. Results show that 84.0% of calcified cases increase the fatigue life up to 11.4%. For rupture paths 10D far from the calcification, the life change is negligible. Calcifications close to lumen increase more fatigue life than those close to the lipid pool. Also, calcifications in the middle area of fibrous cap increase more fatigue life than those in the shoulder area. Conclusion Calcifications may play a positive role in the plaque stability. The influence of the calcification only exists in a local area. Calcifications close to lumen may be influenced more than those close to lipid pool. And calcifications in the middle area of fibrous cap are seemly influenced more than those in the shoulder area.

Fatigue crack growth under pulsatile pressure and plaque rupture

Identification of vulnerable plaque pre-rupture is extremely important for patient risk stratification. The mechanism of plaque rupture is still not entirely clear, but it is thought to be a process involving multiple factors. From a biomechanical viewpoint, plaque rupture is usually seen as a structural failure when the plaque cannot resist the hemodynamic blood pressure and shear stress exerted on it. However, the cardiovascular system is naturally a cyclical hemodynamic environment, and myocardial infarction can be a symptomatically quiescent but potentially progressive process when plaque ruptures at stresses much lower than its strength. Therefore, fatigue accumulation is a possible mechanism for plaque rupture. In this study, a crack growth model was developed, and the previously-mentioned hypothesis was tested by conducting a comparative study between 18 symptomatic and 16 asymptomatic patients with carotid stenosis.

Fatigue crack propagation analysis of plaque rupture

Rupture of atheromatous plaque is the major cause of stroke or heart attack. Considering that the cardiovascular system is a classic fatigue environment, plaque rupture was treated as a chronic fatigue crack growth process in this study. Fracture mechanics theory was introduced to describe the stress status at the crack tip and Paris' law was used to calculate the crack growth rate. The effect of anatomical variation of an idealized plaque cross-section model was investigated. The crack initiation was considered to be either at the maximum circumferential stress location or at any other possible locations around the lumen. Although the crack automatically initialized at the maximum circumferential stress location usually propagated faster than others, it was not necessarily the most critical location where the fatigue life reached its minimum. We found that the fatigue life was minimum for cracks initialized in the following three regions: the midcap zone, the shoulder zone, and the backside zone. The anatomical variation has a significant influence on the fatigue life. Either a decrease in cap thickness or an increase in lipid pool size resulted in a significant decrease in fatigue life. Comparing to the previously used stress analysis, this fatigue model provides some possible explanations of plaque rupture at a low stress level in a pulsatile cardiovascular environment, and the method proposed here may be useful for further investigation of the mechanism of plaque rupture based on in vivo patient data.

MRI-based fatigue analysis predicts plaque vulnerability: A study comparing symptomatic and asymptomatic individuals

BACKGROUND: Rupture of atheromatous plaque in the carotid artery often leads to thrombosis and subsequent stroke. The mechanism of plaque rupture is not entirely clear but is thought to be a multi-factorial process involving thinning and weakening of the fibrous cap and biomechanical stress as the trigger leading to plaque rupture. As the cardiovascular system is a classic fatigue environment, the weakening of plaque leading to rupture may be a fatigue process, which is a symptomatically quiescent but potentially progressive failure process. In this study, we used a fatigue analysis based on in vivo magnetic resonance imaging (MRI) to investigate the rupture initiation location, crack propagation path and fatigue life within plaques of asymptomatic and symptomatic individuals. METHODS: Forty non-consecutive subjects (20 symptomatic and 20 asymptomatic) underwent high-resolution multi-sequence in vivo MRI of the carotid bifurcation. Fatigue analysis was performed based on the plaque geometry derived from in vivo MRI of the carotid artery at the point of maximum stenosis. Paris’ Law in fracture mechanics is adopted to determine the fatigue crack growth rate. Incremental crack propagation was dynamically simulated based on stress distributions. Plaque initiation location, crack propagation path and fatigue cycle of symptomatic and asymptomatic individuals were compared. RESULTS: Cracks were often found to begin at the lumen wall at areas of stress concentration. The preferred rupture direction was radial from the lumen center. The crack initially advanced slowly but accelerated as it developed, depending on plaque morphology. The fatigue cycles of symptomatic plaques were significantly less than those in the asymptomatic group (2.3 ± 0.9 vs 3.1 ± 0.7 (x106); p = 0.003). CONCLUSIONS: The number of cycles to rupture in symptomatic patients was higher than those predicted in asymptomatic patients by fatigue analysis, suggesting the possibility that plaques with a less fatigue life may be more prone to be symptomatic and rupture. If further validated by large-scale longitudinal studies, fatigue analysis based on high resolution in vivo MRI could potentially act as a useful tool for risk assessment of carotid atheroma.

Effects of tempered structure on the near threshold fatigue crack growth behavior of a coarse grained high strength steel

Near threshold fatigue crack growth behavior of a high strength steel under different temper levels was investigated. It is found that the observed variations in ΔKth could predominantly be attributed to roughness induced crack closure. The closure-free component of the threshold stress intensity range, ΔKeff,th showed a systematic variation with monotonic yield strength.

Ancient Philosophers on Mental Illness

This dissertation is about ancient philosophers notions of mental illness, from Plato onwards. Mental illness here means disorders that, in ancient medical thought, were believed to originate in the body but to manifest themselves predominantly through mental symptoms. These illnesses were treated by physical means, which were believed to address the bodily cause of the illness, conceived of as an elemental imbalance or a state of cephalic stricture , for example. Sometimes the mental symptoms were addressed directly by psychotherapeutic means. The first and most important question explored concerns how the ancient philosophers responded to the medical notion of mental illness, and how they explained such illnesses in their theories of physiology and psychology. Although the illnesses are seldom discussed extensively, the philosophers were well aware of their existence and regarded their occurrence an indication of the soul s close dependence on the body. This called for a philosophical account. The second question addressed has to do with the ancient philosophers role as experts in mental problems of a non-medical kind, such as unwanted emotions. These problems were dubbed diseases of the soul , and the philosophers thus claimed to be doctors of the soul. Although the distinction between mental illnesses and diseases of the soul was often presented as rather obvious, there was some vagueness and overlap. There is still a third question that is explored, concerning the status of both mental illnesses and diseases of the soul as unnatural conditions, the role of the human body in the philosophical aetiologies of evil, and the medico-philosophical theories of psycho-physiological temperaments. This work consists of an introduction and five main chapters, focusing on Plato, Aristotle, the Stoics and Galen, and the Sceptics, the Epicureans and later Platonists. The sources drawn on are the original Greek and Latin philosophical and medical texts. It appears that the philosophers accepted the medical notion of mental illness, but interpreted it in various ways. The differences in interpretation were mostly attributable to differences in their theories of the soul. Although the distinction between mental illness and diseases of the soul was important, marking the boundary between the fields of expertise of medicine and philosophy, and of the individual s moral responsibilities, the problematic aspects of establishing it are discussed rather little in ancient philosophy. There may have been various reasons for this. The medical descriptions of mental illness are often extreme, symptoms of the psychotic type excluding the possibility of the condition being of the non-medical kind. In addition, the rigid normativeness of ancient philosophical anthropologies and their rigorous notion of human happiness decreased the need to assess the acceptability of individual variation in their emotional and intellectual lives and external behaviour.

Fatigue crack growth rates and fracture toughness in electroslag refined En 52 steel

En 52 steel has been electroslag refined and the resultant effects of refining on its mechanical properties have been assessed. It was found that refining caused a decrease in fatigue crack growth rates and increases in fatigue strength, fracture toughness, Charpy fracture energy and tensile ductility. Fatigue crack growth rates in region I and in region III were found to be considerably lower in the electroslag refined steel: they were unaffected in region II. The fracture toughness values for the electroslag refined steel are nearly twice those estimated for the unrefined steel. Measurements on heat-treated samples have shown that the electroslag refined steel has a better response to heat-treatment. The improvement in the mechanical properties is explained in terms of the removal of nonmetallic inclusions and a reduction in the sulphur content of the steel.

Effect of electroslag refining on the fracture toughness and fatigue crack propagation rates in heat treated AISI 4340 steel

The AISI 4340 steel has been electroslag refined and the improvement in mechanical properties has been assessed. Electroslag refining (ESR) has improved tensile ductility, plane strain fracture toughness, Charpy fracture energy, and has decreased fatigue crack growth rates. The KIC values for the ESR steel are nearly twice those estimated in the unrefined steel and higher than those obtained in the vacuum arc remelted steel. Fatigue crack growth rates in region I and in region III are found to be decreased considerably in the ESR steel, while they are unaffected in region II. Measurements on heat treated samples have shown that the ESR steel has a better response to heat treatment. Both the suggested heat treatments namely austenitizing at 1140–1470 K as well as the conventional heat treatment of austenitizing at 1140 K have been followed. The improvement in the mechanical properties of ESR steel has been explained on the basis of removal of nonmetallic inclusions and reduction in sulfur content in the steel.

Some Considerations on the Occurrence of Intergranular Fracture during Fatigue Crack growth in Steels

The occurrence of a maximum in the percentage of intergranular fracture on the fracture surface during the transition from intermediate to low fatigue crack growth rates has been observed for a high strength steel. It is suggested that transgranular planar slip leading to slip localization is essential in promoting intergranular fracture when the cyclic plastic zone size becomes equal to the prior austenite grain size.

Non-reductive Physicalism, Irreducibility of the Mental and the Problem of Mental Causation : A study of Donald Davidson's and Georg Henrik von Wright's positions in the philosophy of mind

In this study I consider what kind of perspective on the mind body problem is taken and can be taken by a philosophical position called non-reductive physicalism. Many positions fall under this label. The form of non-reductive physicalism which I discuss is in essential respects the position taken by Donald Davidson (1917-2003) and Georg Henrik von Wright (1916-2003). I defend their positions and discuss the unrecognized similarities between their views. Non-reductive physicalism combines two theses: (a) Everything that exists is physical; (b) Mental phenomena cannot be reduced to the states of the brain. This means that according to non-reductive physicalism the mental aspect of humans (be it a soul, mind, or spirit) is an irreducible part of the human condition. Also Davidson and von Wright claim that, in some important sense, the mental aspect of a human being does not reduce to the physical aspect, that there is a gap between these aspects that cannot be closed. I claim that their arguments for this conclusion are convincing. I also argue that whereas von Wright and Davidson give interesting arguments for the irreducibility of the mental, their physicalism is unwarranted. These philosophers do not give good reasons for believing that reality is thoroughly physical. Notwithstanding the materialistic consensus in the contemporary philosophy of mind the ontology of mind is still an uncharted territory where real breakthroughs are not to be expected until a radically new ontological position is developed. The third main claim of this work is that the problem of mental causation cannot be solved from the Davidsonian - von Wrightian perspective. The problem of mental causation is the problem of how mental phenomena like beliefs can cause physical movements of the body. As I see it, the essential point of non-reductive physicalism - the irreducibility of the mental - and the problem of mental causation are closely related. If mental phenomena do not reduce to causally effective states of the brain, then what justifies the belief that mental phenomena have causal powers? If mental causes do not reduce to physical causes, then how to tell when - or whether - the mental causes in terms of which human actions are explained are actually effective? I argue that this - how to decide when mental causes really are effective - is the real problem of mental causation. The motivation to explore and defend a non-reductive position stems from the belief that reductive physicalism leads to serious ethical problems. My claim is that Davidson's and von Wright's ultimate reason to defend a non-reductive view comes back to their belief that a reductive understanding of human nature would be a narrow and possibly harmful perspective. The final conclusion of my thesis is that von Wright's and Davidson's positions provide a starting point from which the current scientistic philosophy of mind can be critically further explored in the future.

Patterns of care: Primary research in mental health nursing

The foundation of mental health nursing has historically been grounded in an interpersonal, person-centred process of health care, yet recent evidence suggests that the interactional work of mental health nursing is being eroded. Literature emphasises the importance of person-centred care on consumer outcomes, a model reliant upon the intimate engagement of nurses and consumers. Yet, the arrival of medical interventions in psychiatry has diverted nursing work from the therapeutic nursing role to task-based roles delegated by medicine, distancing nurses from consumers. This study used work sampling methodology to observe the proportion of time nurses working in an inpatient mental health setting engage in specific activities. The observations of this study determined that nurses' time is accounted for 31.65% in direct care, 51.63% in indirect care and 16.71% in service related activities.