Light scattering from suspensions under external gradients

We analyze the light-scattering spectrum of a suspension in a viscoelastic fluid under density and velocity gradients. When a density gradient is present, the dynamic structure factor exhibits universality in the sense that its expression depends only on the reduced frequency and the reduced density gradient. For a velocity gradient, however, the universality breaks down. In this last case we have found a transition point from one to three characteristic frequencies in the spectrum, which is governed by the value of the external gradient. The presence of the viscoelastic time scales introduces a shift in the ``critical¿¿ point.

Chemical variability in clays and pottery from a traditional cooking pot production village: Testing assumptions in Pereruela

This paper explores analytically the contemporary pottery-making community of Pereruela (north-west Spain) that produces cooking pots from a mixture of red clay and kaolin. Analyses by different techniques (XRF, NAA, XRD, SEM and petrography) showed an extremely high variability for cooking ware pottery produced in a single production centre, by the same technology and using local clays. The main source of chemical variation is related to the use of different red clays and the presence of non-normally distributed inclusions of monazite. These two factors induce a high chemical variability, not only in the output of a single production centre, but even in the paste of a single pot, to an extent to which chemical compositions from one"workshop", or even one"pot", could be classified as having different provenances. The implications for the chemical characterization and for provenance studies of archaeological ceramics are addressed.

Impairment of the Bacterial Biofilm Stability by Triclosan

The accumulation of the widely-used antibacterial and antifungal compound triclosan (TCS) in freshwaters raises concerns about the impact of this harmful chemical on the biofilms that are the dominant life style of microorganisms in aquatic systems. However, investigations to-date rarely go beyond effects at the cellular, physiological or morphological level. The present paper focuses on bacterial biofilms addressing the possible chemical impairment of their functionality, while also examining their substratum stabilization potential as one example of an important ecosystem service. The development of a bacterial assemblage of natural composition – isolated from sediments of the Eden Estuary (Scotland, UK) – on non-cohesive glass beads (,63 mm) and exposed to a range of triclosan concentrations (control, 2 – 100 mg L21) was monitored over time by Magnetic Particle Induction (MagPI). In parallel, bacterial cell numbers, division rate, community composition (DGGE) and EPS (extracellular polymeric substances: carbohydrates and proteins) secretion were determined. While the triclosan exposure did not prevent bacterial settlement, biofilm development was increasingly inhibited by increasing TCS levels. The surface binding capacity (MagPI) of the assemblages was positively correlated to the microbial secreted EPS matrix. The EPS concentrations and composition (quantity and quality) were closely linked to bacterial growth, which was affected by enhanced TCS exposure. Furthermore, TCS induced significant changes in bacterial community composition as well as a significant decrease in bacterial diversity. The impairment of the stabilization potential of bacterial biofilm under even low, environmentally relevant TCS levels is of concern since the resistance of sediments to erosive forces has large implications for the dynamics of sediments and associated pollutant dispersal. In addition, the surface adhesive capacity of the biofilm acts as a sensitive measure of ecosystem effects

Contribution of electrostatic interactions, compactness and quaternary structure to protein thermostability: lessons from structural genomics of Thermotoga maritima.

Studies of the structural basis of protein thermostability have produced a confusing picture. Small sets of proteins have been analyzed from a variety of thermophilic species, suggesting different structural features as responsible for protein thermostability. Taking advantage of the recent advances in structural genomics, we have compiled a relatively large protein structure dataset, which was constructed very carefully and selectively; that is, the dataset contains only experimentally determined structures of proteins from one specific organism, the hyperthermophilic bacterium Thermotoga maritima, and those of close homologs from mesophilic bacteria. In contrast to the conclusions of previous studies, our analyses show that oligomerization order, hydrogen bonds, and secondary structure play minor roles in adaptation to hyperthermophily in bacteria. On the other hand, the data exhibit very significant increases in the density of salt-bridges and in compactness for proteins from T.maritima. The latter effect can be measured by contact order or solvent accessibility, and network analysis shows a specific increase in highly connected residues in this thermophile. These features account for changes in 96% of the protein pairs studied. Our results provide a clear picture of protein thermostability in one species, and a framework for future studies of thermal adaptation.

Are there control processes, and (if so) can they be studied?

Generally, so-called control processes are thought to be necessary when we must perform one out of several competing actions. Some examples include performance of a less well-practiced action instead of a well-practiced one (prepotency); learning a new action (novelty); and rapidly switching from one action to another (task-switching). While it certainly is difficult to perform the desired action in these circumstances, it is less clear that a separate set of processes (e.g., control processes) are necessary to explain the observed behavior. Another way to approach the study of control processes is to investigate physiological dependent measures (e.g., electrophysiological or neuroimaging measures). Although these offer another avenue of inquiry into control processes, they have yet to furnish unambiguous evidence that control processes exist. While this might suggest that there are no control processes, it is also possible that our methods are insufficiently sensitive to measure control processes. We have investigated this latter possibility using tasks that are neuroanatomically distinct, though within the same modality (vision). This approach did not yield evidence for a separable set of control processes. However, recent works using a task-switching paradigm in which subjects switch between a visual and an auditory task suggest that switching both task and modality may be importantly different than switching task within a given modality. This may represent a way forward in the study of control processes.

Micromeasurement of total and regional CO2 productions in the one-day-old chick embryo.

A conductometric micromethod combined with image analysis system has been developed allowing to determine the CO2 production within 'two-dimensional' tissues, i.e., flat and thin cell layers or epithelial sheets. The preparation was mounted into an airtight chamber separated in two compartments by a thin silicone membrane permeable to gases. The lower compartment contained the nutritive medium and the preparation. The upper compartment and a conductivity measuring capillary connected in series were perfused with a solution of Ba(OH)2. The CO2 produced by the tissue precipitated as BaCO3 and the resulting decrease of electrical conductivity was linearly related to the total CO2 production. In addition, the pattern of CO2 production was directly observable as the BaCO3 crystals formed upon the silicone membrane over the regions which produced CO2. The spatial distribution of the crystals was quantified by video image processing and the regional CO2 production evaluated with a spatial resolution of 100 microns. This new microtechnique was originally developed to study the CO2 production in the early chick blastoderm which is a disc 1-5 cells thick. At the stage of young neurula the CO2 production was found to be 235 +/- 37 nmol.h-1 (mean +/- SD; n = 10) per blastoderm and large variations of local CO2 production were detected from one region to another (from 0.6 to 6.5 nmol.h-1.mm-2). These results indicate a high metabolic and functional differentiation of cells within the blastoderm. The possible applications and improvements of such a microtechnique are discussed.

Use of anisotropic modelling in electrical impedance tomography: description of method and preliminary assessment of utility in imaging brain function in the adult human head.

Electrical Impedance Tomography (EIT) is an imaging method which enables a volume conductivity map of a subject to be produced from multiple impedance measurements. It has the potential to become a portable non-invasive imaging technique of particular use in imaging brain function. Accurate numerical forward models may be used to improve image reconstruction but, until now, have employed an assumption of isotropic tissue conductivity. This may be expected to introduce inaccuracy, as body tissues, especially those such as white matter and the skull in head imaging, are highly anisotropic. The purpose of this study was, for the first time, to develop a method for incorporating anisotropy in a forward numerical model for EIT of the head and assess the resulting improvement in image quality in the case of linear reconstruction of one example of the human head. A realistic Finite Element Model (FEM) of an adult human head with segments for the scalp, skull, CSF, and brain was produced from a structural MRI. Anisotropy of the brain was estimated from a diffusion tensor-MRI of the same subject and anisotropy of the skull was approximated from the structural information. A method for incorporation of anisotropy in the forward model and its use in image reconstruction was produced. The improvement in reconstructed image quality was assessed in computer simulation by producing forward data, and then linear reconstruction using a sensitivity matrix approach. The mean boundary data difference between anisotropic and isotropic forward models for a reference conductivity was 50%. Use of the correct anisotropic FEM in image reconstruction, as opposed to an isotropic one, corrected an error of 24 mm in imaging a 10% conductivity decrease located in the hippocampus, improved localisation for conductivity changes deep in the brain and due to epilepsy by 4-17 mm, and, overall, led to a substantial improvement on image quality. This suggests that incorporation of anisotropy in numerical models used for image reconstruction is likely to improve EIT image quality.

Effects of particulate matters on inflammatory markers in the general adult population

Summary: Particulate air pollution is associated with increased cardiovascular risk. The induction of systemic inflammation following particle inhalation represents a plausible mechanistic pathway. The purpose of this study was to assess the associations of short-term exposure to ambient particulate matters of aerodynamic diameter less than 10 μm (PM10) with circulating inflammatory markers in 6183 adults in Lausanne, Switzerland. The results show that short-term exposure to PM10 was associated with higher levels of circulating IL-6 and TNF-α. The positive association of PM10 with markers of systemic inflammation materializes the link between air pollution and cardiovascular risk. Background: Variations in short-term exposure to particulate matters (PM) have been repeatedly associated with daily all-cause mortality. Particle-induced inflammation has been postulated to be one of the important mechanisms for increased cardiovascular risk. Experimental in-vitro, in-vivo and controlled human studies suggest that interleukin 6 (IL-6) and tumor-necrosis-factor alpha (TNF-α) could represent key mediators of the inflammatory response to PM. The associations of short-term exposure to ambient PM with circulating inflammatory markers have been inconsistent in studies including specific subgroups so far. The epidemiological evidence linking short-term exposure to ambient PM and systemic inflammation in the general population is scarce. So far, large-scale population-based studies have not explored important inflammatory markers such as IL-6, IL-1β or TNF-α. We therefore analyzed the associations between short-term exposure to ambient PM10 and circulating levels of high-sensitive CRP (hs-CRP), IL-6, IL-1β and TNF-α in the population-based CoLaus study. Objectives: To assess the associations of short-term exposure to ambient particulate matters of aerodynamic diameter less than 10 μm (PM10) with circulating inflammatory markers, including hs-CRP, IL-6, IL-1β and TNF-α, in adults aged 35 to 75 years from the general population. Methodology: All study subjects were participants to the CoLaus study (www.colaus.ch) and the baseline examination was carried out from 2003 to 2006. Overall, 6184 participants were included. For the present analysis, 6183 participants had data on at least one of the four measured circulating inflammatory markers. The monitoring data was obtained from the website of Swiss National Air Pollution Monitoring Network (NABEL). We analyzed data on PM10 as well as outside air temperature, pressure and humidity. Hourly concentrations of PM10 were collected from 1 January 2003 to 31 December 2006. Robust linear regression (PROC ROBUSTREG) was used to evaluate the relationship between cytokine inflammatory and PM10. We adjusted all analyses for age, sex, body mass index, smoking status, alcohol consumption, diabetes status, hypertension status, education levels, zip code, and statin intake. All data were adjusted for the effects of weather by including temperature, barometric pressure, and season as covariates in the adjusted models. We performed simple and multiple logistic regression analyses. Descriptive statistical analysis used the Wilcoxon rank sum test (for medians). All data analyses were performed using SAS software (version 9.2; SAS Institute Inc., Cary, NC, USA), and a two-sided significance level of 5% was used. Results: PM10 levels averaged over 24 hours were significantly and positively associated with continuous IL-6 and TNF-α levels, in the whole study population both in unadjusted and adjusted analyses. For each cytokine, there was a similar seasonal pattern, with wider confidence intervals in summer than during the other seasons, which might partly be due to the smaller number of participants examined in summer. The associations of PM10 with IL-6 and TNF-α were also found after having dichotomized these cytokines into high versus low levels, which suggests that the associations of PM10 with the continuous cytokine levels are very robust to any distributional assumption and to potential outlier values. In contrast with what we observed for continuous IL-1β levels, high PM10 levels were significantly associated with high IL-1β. PM10 was significantly associated with IL-6 and TNF-α in men, but with TNF-α only in women. However, there was no significant statistical interaction between PM10 and sex. For IL-6 and TNF-α, the associations tended to be stronger in younger people, with a significant interaction between PM10 and age groups for IL-6. PM10 was significantly associated with IL-6 and TNF-α in the healthy group and also in the "non-healthy" group, although the statistical interaction between healthy status and PM10 was not significant. Conclusion: In summary, we found significant independent positive associations of short-term exposure to PM10 with circulating levels of IL-6 and TNF-α in the adult population of Lausanne. Our findings strongly support the idea that short-term exposure to PM10 is sufficient to induce systemic inflammation on a broad scale in the general population. From a public health perspective, the reported association of elevated inflammatory cytokines with short-term exposure to PM10 in a city with relatively clean air such as Lausanne supports the importance of limiting urban air pollution levels.

Verkko-oppimateriaalien uudelleenkäytettävyys ja siirrettävyys oppimisalustalta toiselle

Työssä tarkastellaan oppimisalustoilla käytettäviä testikysymyksiä ja oppisisältöjä uudelleen-käytettävyyden ja siirrettävyyden näkökulmasta. Tavoitteena on selvittää, minkälaisia välineitä määrämuotoisten sisältöjen tuottamista varten on olemassa, ja miten niillä luodut materiaalit ovat siirrettävissä työvälineestä toiseen ja oppimisalustoille. Tutkittavana ovat sisällön paketointiin tarkoitetutSCORM- ja IMS Content Packaging -spesifikaatiot sekä kysymysten esittämiseen tarkoitettu IMS Question and Test Interoperability -spesifikaatio. Pääpaino työssäon selvittää, miten oppisisällöt ovat siirrettävissä WebCT- ja Moodle-alustojenvälillä. Tähän liittyen on luotu ohjeistus, miten yksittäiset tiedostot, kysymykset ja Sisältökokonaisuus-työkalulla koostetut sisällöt siirretään WebCT:ltä Moodleen.

Sähköisten reseptien hallinta

Sähköinen reseptijärjestelmä nykyisessä muodossaan sai alkunsa Sosiaali- ja terveysministeriön aloitteesta ja Kansaneläkelaitoksen toimesta vuoden 2001 aikana. Käytössä oleva kansallinen reseptipalvelin mahdollistaa potilaiden oikeudet muun muassa apteekin vapaaseen valintaan ja lääkkeiden suorakorvausmenetelmään. Sähköinen resepti pyritään integroimaan olemassa olevien potilasrekisterijärjestelmien yhteyteen, joten semanttisen webin tuomat teknologiat kuten Web-palvelut ja XML-pohjaiset kielet ovat tärkeässä asemassa reseptien hallinnassa. Tässä työssä pyritään esittämään sähköisen reseptijärjestelmän toimintaa ja sen mahdollistavia jo olemassa olevia tekniikoita. Esille tuodaan myös uusia lisäarvoa tuovia tekniikoita, kuten RDF(S)-kuvauskielet, jotka mahdollistavat muun muassa resepteihin kohdistuvat kyselyt ja täten uudet terveyspalvelut sekä potilaille että lääkäreille. Oleellista on tietenkin myös tietoturva, sillä organisaatioiden välillä resepteissä liikkuu arkaluontoisia tietoja. Turvallisuutta pyritään edistämään muun muassa sähköisillä allekirjoituksilla ja älykorttien avulla tapahtuvalla järjestelmään tunnistautumisella. Jotta sähköinen resepti toimisi tulevaisuudessakin halutulla tavalla ja mahdollistaisi lisäarvopalveluita, on siinä panostettava sisällön lisäksi senkuvaamiseen. Sisällön ja sen suhteiden tarkka määrittely auttaa muun muassa reseptikyselyjen tekemisessä, mikä onkin olennainen osa potilasturvallisuuden ylläpitoa. Kuvauskielien ja ontologioiden käyttö voi myös auttaa lääkehoidon määrittämisessä useiden erilaisten ja jatkuvasti lisääntyvien lääkkeiden viidakossa, kun lääkkeitä voidaan etsiä tietokannoista reseptin kirjoituksen yhteydessä.

Sähköisen hankintatyökalun kehittäminen ja käyttöönotto. Case: Inex Partners Oy

Internetin yleistyminen on luonut uudenlaiset puitteet yritysten väliselle sähköiselle kaupankäynnille. Vanhat EDI-pohjaiset järjestelmät koetaan kalliiksi ja sitoviksi ja niiden sijasta rakennetaan www-teknologiaan pohjautuvia järjestelmiä. Tämän pro gradu-tutkielman tarkoituksena oli kuvata mahdollisimman tarkkaan erään web-pohjaisen hankintatyökalun kehittämis- ja käyttöönottoprojekti sekä arvioida sen onnistumista sekä käyttöönoton vaikutuksia. Case yrityksenä tutkielmassa toimii valikoima- ja logistiikkayhtiö Inex Partners Oy. Tutkielma on luonteeltaan toimintatutkimus, sillä tutkija on osa tutkimuskohdetta. Työn teoriaosassa käsitellään hankintatoimen strategiaa toimittajien valinnan ja toimittajasuhteiden hallinnan näkökulmasta. Tämän jälkeen esitellään sähköistä kaupankäyntiä ja sen hankintatoimelle tarjoamia sovelluksia. Kehitysprojektin tuotoksena syntyi sähköinen SRM-toimittajaportaali, joka mahdollistaa tarjouspyyntöjen lähettämisen ja vastaanottamisen Inexin ja tavarantoimittajien välillä. Portaali on integroitu Inexin toiminnanohjausjärjestelmään (ERP) siten, että tarjouspyyntöjen perusteella muodostuneet ostotilaukset siirtyvät järjestelmästä toiseen. Tutkielman johtopäätöksinä esitetään, että läpikäyty kehitysprojekti oli lähtökohtaisesti oikeintoteutettu ja yrityksen strategian mukainen. Tuotoksena saadun toimittajaportaalin istuvuutta tuoteryhmän hankintastrategiaan ei kuitenkaan oltu otettu tarpeeksi huomioon. Teknisen toteutuksen monimutkaisuus asettaa myös haasteensa työkalun käytölle. Jatkokehitystarpeiksi puolestaan esitetään portaalin räätälöimistä Inexin muiden tuoteryhmien hankinnan tueksi sekä portaalin huutokauppa- toiminnallisuuden kehittämistä ja käyttöönotttoa.

Dynamic Model of a Small Once-Through Boiler

In this study, a model for the unsteady dynamic behaviour of a once-through counter flow boiler that uses an organic working fluid is presented. The boiler is a compact waste-heat boiler without a furnace and it has a preheater, a vaporiser and a superheater. The relative lengths of the boiler parts vary with the operating conditions since they are all parts of a single tube. The present research is a part of a study on the unsteady dynamics of an organic Rankine cycle power plant and it will be a part of a dynamic process model. The boiler model is presented using a selected example case that uses toluene as the process fluid and flue gas from natural gas combustion as the heat source. The dynamic behaviour of the boiler means transition from the steady initial state towards another steady state that corresponds to the changed process conditions. The solution method chosen was to find such a pressure of the process fluid that the mass of the process fluid in the boiler equals the mass calculated using the mass flows into and out of the boiler during a time step, using the finite difference method. A special method of fast calculation of the thermal properties has been used, because most of the calculation time is spent in calculating the fluid properties. The boiler was divided into elements. The values of the thermodynamic properties and mass flows were calculated in the nodes that connect the elements. Dynamic behaviour was limited to the process fluid and tube wall, and the heat source was regarded as to be steady. The elements that connect the preheater to thevaporiser and the vaporiser to the superheater were treated in a special way that takes into account a flexible change from one part to the other. The model consists of the calculation of the steady state initial distribution of the variables in the nodes, and the calculation of these nodal values in a dynamic state. The initial state of the boiler was received from a steady process model that isnot a part of the boiler model. The known boundary values that may vary during the dynamic calculation were the inlet temperature and mass flow rates of both the heat source and the process fluid. A brief examination of the oscillation around a steady state, the so-called Ledinegg instability, was done. This examination showed that the pressure drop in the boiler is a third degree polynomial of the mass flow rate, and the stability criterion is a second degree polynomial of the enthalpy change in the preheater. The numerical examination showed that oscillations did not exist in the example case. The dynamic boiler model was analysed for linear and step changes of the entering fluid temperatures and flow rates.The problem for verifying the correctness of the achieved results was that there was no possibility o compare them with measurements. This is why the only way was to determine whether the obtained results were intuitively reasonable and the results changed logically when the boundary conditions were changed. The numerical stability was checked in a test run in which there was no change in input values. The differences compared with the initial values were so small that the effects of numerical oscillations were negligible. The heat source side tests showed that the model gives results that are logical in the directions of the changes, and the order of magnitude of the timescale of changes is also as expected. The results of the tests on the process fluid side showed that the model gives reasonable results both on the temperature changes that cause small alterations in the process state and on mass flow rate changes causing very great alterations. The test runs showed that the dynamic model has no problems in calculating cases in which temperature of the entering heat source suddenly goes below that of the tube wall or the process fluid.

Torque vibration model of axial-flux surface-mounted permanent magnet synchronous machine

In order that the radius and thus ununiform structure of the teeth and otherelectrical and magnetic parts of the machine may be taken into consideration the calculation of an axial flux permanent magnet machine is, conventionally, doneby means of 3D FEM-methods. This calculation procedure, however, requires a lotof time and computer recourses. This study proves that also analytical methods can be applied to perform the calculation successfully. The procedure of the analytical calculation can be summarized into following steps: first the magnet is divided into slices, which makes the calculation for each section individually, and then the parts are submitted to calculation of the final results. It is obvious that using this method can save a lot of designing and calculating time. Thecalculation program is designed to model the magnetic and electrical circuits of surface mounted axial flux permanent magnet synchronous machines in such a way, that it takes into account possible magnetic saturation of the iron parts. Theresult of the calculation is the torque of the motor including the vibrations. The motor geometry and the materials and either the torque or pole angle are defined and the motor can be fed with an arbitrary shape and amplitude of three-phase currents. There are no limits for the size and number of the pole pairs nor for many other factors. The calculation steps and the number of different sections of the magnet are selectable, but the calculation time is strongly depending on this. The results are compared to the measurements of real prototypes. The permanent magnet creates part of the flux in the magnetic circuit. The form and amplitude of the flux density in the air-gap depends on the geometry and material of the magnetic circuit, on the length of the air-gap and remanence flux density of the magnet. Slotting is taken into account by using the Carter factor in the slot opening area. The calculation is simple and fast if the shape of the magnetis a square and has no skew in relation to the stator slots. With a more complicated magnet shape the calculation has to be done in several sections. It is clear that according to the increasing number of sections also the result will become more accurate. In a radial flux motor all sections of the magnets create force with a same radius. In the case of an axial flux motor, each radial section creates force with a different radius and the torque is the sum of these. The magnetic circuit of the motor, consisting of the stator iron, rotor iron, air-gap, magnet and the slot, is modelled with a reluctance net, which considers the saturation of the iron. This means, that several iterations, in which the permeability is updated, has to be done in order to get final results. The motor torque is calculated using the instantaneous linkage flux and stator currents. Flux linkage is called the part of the flux that is created by the permanent magnets and the stator currents passing through the coils in stator teeth. The angle between this flux and the phase currents define the torque created by the magnetic circuit. Due to the winding structure of the stator and in order to limit the leakage flux the slot openings of the stator are normally not made of ferromagnetic material even though, in some cases, semimagnetic slot wedges are used. In the slot opening faces the flux enters the iron almost normally (tangentially with respect to the rotor flux) creating tangential forces in the rotor. This phenomenon iscalled cogging. The flux in the slot opening area on the different sides of theopening and in the different slot openings is not equal and so these forces do not compensate each other. In the calculation it is assumed that the flux entering the left side of the opening is the component left from the geometrical centre of the slot. This torque component together with the torque component calculated using the Lorenz force make the total torque of the motor. It is easy to assume that when all the magnet edges, where the derivative component of the magnet flux density is at its highest, enter the slot openings at the same time, this will have as a result a considerable cogging torque. To reduce the cogging torquethe magnet edges can be shaped so that they are not parallel to the stator slots, which is the common way to solve the problem. In doing so, the edge may be spread along the whole slot pitch and thus also the high derivative component willbe spread to occur equally along the rotation. Besides forming the magnets theymay also be placed somewhat asymmetric on the rotor surface. The asymmetric distribution can be made in many different ways. All the magnets may have a different deflection of the symmetrical centre point or they can be for example shiftedin pairs. There are some factors that limit the deflection. The first is that the magnets cannot overlap. The magnet shape and the relative width compared to the pole define the deflection in this case. The other factor is that a shifting of the poles limits the maximum torque of the motor. If the edges of adjacent magnets are very close to each other the leakage flux from one pole to the other increases reducing thus the air-gap magnetization. The asymmetric model needs some assumptions and simplifications in order to limit the size of the model and calculation time. The reluctance net is made for symmetric distribution. If the magnets are distributed asymmetrically the flux in the different pole pairs will not be exactly the same. Therefore, the assumption that the flux flows from the edges of the model to the next pole pairs, in the calculation model from one edgeto the other, is not correct. If it were wished for that this fact should be considered in multi-pole pair machines, this would mean that all the poles, in other words the whole machine, should be modelled in reluctance net. The error resulting from this wrong assumption is, nevertheless, irrelevant.

Time patterns and perceptions of online learning success factors

Online learning provides the opportunity to work on academic tasks at any time at the same time as doing other activities, such as using in web 2.0 tools. This study identifies factors that contribute to success in online learning from the students¿ perspective and their relationship with time patterns. A survey of learning outputs was used to find relationships between students¿ satisfaction, knowledge acquisition and knowledge transfer with time for working on academic tasks. In this study, 199 students from a university in Mexico completed the survey. Findings suggest that knowledge transfer has a significant association with the number of hours online per day, hours spent on social networks and the use made of e-learning during working hours. Learner satisfaction has a strong relationship with the time in years a learner has been using the Internet and the number of hours devoted to the course per week. The findings of this research will be helpful for faculty and instructional designers for implementing learning strategies.

Lämpökäsitellyn puun logistiikkaketju

Työn tavoitteena oli selvittää lämpöpuukäsittelijän mahdollisuuksia laajentaa toimintaansa alihankinnan avulla lämpökäsiteltyjen tuotteiden loppuvalmistajiksi mahdollisesti myös uusilla tuotteilla. Ensin selvitettiin markkinoilla jo olevat lämpöpuusta tehdyt tuotteet. Tämän jälkeen kartoitettiin Suomessa ja ulkomailla toimivat lämpökäsittelylaitokset sekä niiden prosessit. Kirjallisuuden perusteella kerättiin tietoa lämpöpuun ominaisuuksista; eli mitä vaikutuksia lämpökäsittelyllä on puuhun. Edelleen kartoitettiin lämpöpuun logistiikkaketju puun valinnasta ja kaadosta aina loppukäyttäjälle asti. Lisäksi selvitettiin lämpökäsitellyn puun kustannusrakenne Suomessa. Lämpökäsittely on vasta kehittelyvaiheessa, joten lämpökäsittelystä puusta tehtyjä tuotteita on Suomessa saatavana lähinnä puualan liikkeistä tai suoraan lämpökäsittelylaitoksilta. Tällä hetkellä Suomessa eniten lämpökäsitellystä puusta tehtyjä tuotteita ovat saunat ja kalusteet. Suurin osa lämpöpuusta viedäänkin ulkomaille, jossa sitä käytetään lähinnä ulkoverhouksena.Lämpökäsittelyn puun menekin kasvua hidastaa lämpöpuun korkea hinta sekä tiedon puute jatkojalostajilla. Tiedon puutteen takia lämpökäsitelty puu onkin saanut maineeseensa kolauksen väärien työmenetelmien vuoksi. Lämpöpuun kehitys- sekä tutkimistyötä on vielä jatkettava. Laatu on avainasemassa näillä markkinoilla.