Zonation for 3D aquifer characterization based on joint inversions of multimethod crosshole geophysical data

Predictive groundwater modeling requires accurate information about aquifer characteristics. Geophysical imaging is a powerful tool for delineating aquifer properties at an appropriate scale and resolution, but it suffers from problems of ambiguity. One way to overcome such limitations is to adopt a simultaneous multitechnique inversion strategy. We have developed a methodology for aquifer characterization based on structural joint inversion of multiple geophysical data sets followed by clustering to form zones and subsequent inversion for zonal parameters. Joint inversions based on cross-gradient structural constraints require less restrictive assumptions than, say, applying predefined petro-physical relationships and generally yield superior results. This approach has, for the first time, been applied to three geophysical data types in three dimensions. A classification scheme using maximum likelihood estimation is used to determine the parameters of a Gaussian mixture model that defines zonal geometries from joint-inversion tomograms. The resulting zones are used to estimate representative geophysical parameters of each zone, which are then used for field-scale petrophysical analysis. A synthetic study demonstrated how joint inversion of seismic and radar traveltimes and electrical resistance tomography (ERT) data greatly reduces misclassification of zones (down from 21.3% to 3.7%) and improves the accuracy of retrieved zonal parameters (from 1.8% to 0.3%) compared to individual inversions. We applied our scheme to a data set collected in northeastern Switzerland to delineate lithologic subunits within a gravel aquifer. The inversion models resolve three principal subhorizontal units along with some important 3D heterogeneity. Petro-physical analysis of the zonal parameters indicated approximately 30% variation in porosity within the gravel aquifer and an increasing fraction of finer sediments with depth.

Constraining ACT-R models of decision strategies: An experimental paradigm

It has been repeatedly debated which strategies people rely on in inference. These debates have been difficult to resolve, partially because hypotheses about the decision processes assumed by these strategies have typically been formulated qualitatively, making it hard to test precise quantitative predictions about response times and other behavioral data. One way to increase the precision of strategies is to implement them in cognitive architectures such as ACT-R. Often, however, a given strategy can be implemented in several ways, with each implementation yielding different behavioral predictions. We present and report a study with an experimental paradigm that can help to identify the correct implementations of classic compensatory and non-compensatory strategies such as the take-the-best and tallying heuristics, and the weighted-linear model.

Association of sports club participation with fitness and fatness in children.

Decreased fitness and increased fatness are relevant factors for decreased cardiovascular and bone health in children. One way to increase physical activity and hence fitness and to reduce the risk for overweight might be sports club participation (SCP). PURPOSE: To investigate the association of SCP with fatness and fitness in children in general and in those with increased risk for overweight and/or low fitness. METHODS: A cross-sectional study was conducted in a random sample of 502 first- and fifth-grade primary school children. Fitness components were determined by 10 motor tests and body fatness by the sum of four skinfolds. SCP was defined as participation of at least once a week. RESULTS: Two thirds of all children were participating in a sports club. Girls' and boys' participation rate as well as those of overweight children and of children with overweight parents were comparable to their respective normal weight peers. In contrast, children from migrant families (odds ratio = 0.31; 95% confidence interval = 0.20-0.48) and from inactive parents (odds ratio = 0.16; 95% confidence interval = 0.05-0.45) participated significantly less (all P < 0.001). SCP was associated with endurance (0.53 > beta > 0.37, all P < 0.05) and partly with speed, strength, and coordination (0.41 > beta > 0.18, all P < 0.05). In overweight children and in children from overweight parents and migrant families, this association was not found. There was no association between SCP and fatness in any of the groups. CONCLUSIONS: SCP rates were high and were associated with higher levels of most fitness components in children. Participation rates were lower for children of migrant families and children from inactive parents. In addition, the association between SCP and fitness components was not found in overweight children and in children from overweight parents and migrant families.

Evaluation of Lightweight Profilers for Construction Smoothness Evaluation, MLR-02-02, 2004

High-speed non-contact laser profilers have become the standard testing equipment for pavement management ride quality testing. The same technology used in the high-speed profilers is now being used in lightweight profilers for construction smoothness testing. The lightweight profilers have many advantages over the California 25-ft profilograph. Despite the many advantages of the lightweight profilers, there is resistance from the contracting industry toward eliminating the 25-ft profilograph for construction ride testing. One way to reduce or overcome the resistance is to evaluate and demonstrate the advantages/disadvantages of the lightweight profiler in actual field use in Iowa. The objective of the study was to purchase a lightweight profiler and to evaluate its suitability for construction smoothness quality verification and quality acceptance on Iowa projects. A lightweight profiler, an Ames Engineering, Inc. LISA single laser unit, was received in February 2003 for the study. Based on the work done during the 2003 construction season, the following conclusions can be made: (1) For hot mix asphalt surfaces, the LISA correlated well with the contractors' profilographs; (2) LISA results are significantly affected by longitudinal tining on portland cement concrete pavements, requiring a laser system upgrade to give accurate results; (3) A significant timesaving was realized by using the LISA; (4) Increasing visibility and reducing time in the construction zone improved safety; (5) One person with limited lifting capabilities could set up and operate the LISA; and (6) With the current Iowa Department of Transportation specification, the LISA cannot totally replace the profilograph, since bridges and short segments with no adjoining pavement would still require a profilograph.

Road Safety Audit for the US 61/Harrison Street and West Locust Street Intersection in Davenport-Scott County, Iowa, 2008

On the October 7 and 8, 2008, a road safety audit was conducted for the intersection of US 61/Harrison Street and West Locust Street in Davenport, Iowa. US 61/Harrison Street is a one-way street and a principal arterial route through Davenport, with three southbound lanes. Locust Street is a four-lane, two-way minor arterial running across the city from west to east. The last major improvement at this intersection was implemented approximately 20 years ago. The Iowa Department of Transportation requested a safety audit of this intersection in response to a high incidence of crashes at the location over the past several years, in view of the fact that no major improvements are anticipated for this intersection in the immediate future. The road safety audit team discussed current conditions at the intersection and reviewed the last seven years of crash data. The team also made daytime and nighttime field visits to the intersection to examine field conditions and observe traffic flow and crossing guard operations with younger pedestrians. After discussing key issues, the road safety audit team drew conclusions and suggested possible enforcement, engineering, public information, and educational strategies for mitigation.

Topological phases in small quantum Hall samples

Topological order has proven a useful concept to describe quantum phase transitions which are not captured by the Ginzburg-Landau type of symmetry-breaking order. However, lacking a local order parameter, topological order is hard to detect. One way to detect it is via direct observation of anyonic properties of excitations which are usually discussed in the thermodynamic limit, but so far has not been realized in macroscopic quantum Hall samples. Here we consider a system of few interacting bosons subjected to the lowest Landau level by a gauge potential, and theoretically investigate vortex excitations in order to identify topological properties of different ground states. Our investigation demonstrates that even in surprisingly small systems anyonic properties are able to characterize the topological order. In addition, focusing on a system in the Laughlin state, we study the robustness of its anyonic behavior in the presence of tunable finite-range interactions acting as a perturbation. A clear signal of a transition to a different state is reflected by the system's anyonic properties.

Les divers sens de la notion d'autonomie en médecine et leur pertinence en clinique [The various senses of autonomy and their relevance to clinical practice]

Since the introduction of the principle of respect of autonomy in medical ethics, the respect of the will of the patient occupied a central place in the decision-making process. To face up to the difficulties that appeared during the application of this principle in clinical medicine, Bruce Miller proposed in the early eighties one way to clarify the significance of this notion in the field of medical practice. He showed that the concept of autonomy can be understood under four senses which deserve to be explored in case of ethical conflict. This article shows, through the analysis of a clinical situation, the relevance of the approach suggested by this author and proposes to refer to this approach in case of ethical dilemmas in clinical practice.

Synchronization of symmetric chaotic systems

This paper contains a study of the synchronization by homogeneous nonlinear driving of systems that are symmetric in phase space. The main consequence of this symmetry is the ability of the response to synchronize in more than just one way to the driving systems. These different forms of synchronization are to be understood as generalized synchronization states in which the motions of drive and response are in complete correlation, but the phase space distance between them does not converge to zero. In this case the synchronization phenomenon becomes enriched because there is multistability. As a consequence, there appear multiple basins of attraction and special responses to external noise. It is shown, by means of a computer simulation of various nonlinear systems, that: (i) the decay to the generalized synchronization states is exponential, (ii) the basins of attraction are symmetric, usually complicated, frequently fractal, and robust under the changes in the parameters, and (iii) the effect of external noise is to weaken the synchronization, and in some cases to produce jumps between the various synchronization states available

Multi-scale systems analysis of plant development : beyond cellular signaling and tissue morphodynamics

Les plantes sont essentielles pour les sociétés humaines. Notre alimentation quotidienne, les matériaux de constructions et les sources énergétiques dérivent de la biomasse végétale. En revanche, la compréhension des multiples aspects développementaux des plantes est encore peu exploitée et représente un sujet de recherche majeur pour la science. L'émergence des technologies à haut débit pour le séquençage de génome à grande échelle ou l'imagerie de haute résolution permet à présent de produire des quantités énormes d'information. L'analyse informatique est une façon d'intégrer ces données et de réduire la complexité apparente vers une échelle d'abstraction appropriée, dont la finalité est de fournir des perspectives de recherches ciblées. Ceci représente la raison première de cette thèse. En d'autres termes, nous appliquons des méthodes descriptives et prédictives combinées à des simulations numériques afin d'apporter des solutions originales à des problèmes relatifs à la morphogénèse à l'échelle de la cellule et de l'organe. Nous nous sommes fixés parmi les objectifs principaux de cette thèse d'élucider de quelle manière l'interaction croisée des phytohormones auxine et brassinosteroïdes (BRs) détermine la croissance de la cellule dans la racine du méristème apical d'Arabidopsis thaliana, l'organisme modèle de référence pour les études moléculaires en plantes. Pour reconstruire le réseau de signalement cellulaire, nous avons extrait de la littérature les informations pertinentes concernant les relations entre les protéines impliquées dans la transduction des signaux hormonaux. Le réseau a ensuite été modélisé en utilisant un formalisme logique et qualitatif pour pallier l'absence de données quantitatives. Tout d'abord, Les résultats ont permis de confirmer que l'auxine et les BRs agissent en synergie pour contrôler la croissance de la cellule, puis, d'expliquer des observations phénotypiques paradoxales et au final, de mettre à jour une interaction clef entre deux protéines dans la maintenance du méristème de la racine. Une étude ultérieure chez la plante modèle Brachypodium dystachion (Brachypo- dium) a révélé l'ajustement du réseau d'interaction croisée entre auxine et éthylène par rapport à Arabidopsis. Chez ce dernier, interférer avec la biosynthèse de l'auxine mène à la formation d'une racine courte. Néanmoins, nous avons isolé chez Brachypodium un mutant hypomorphique dans la biosynthèse de l'auxine qui affiche une racine plus longue. Nous avons alors conduit une analyse morphométrique qui a confirmé que des cellules plus anisotropique (plus fines et longues) sont à l'origine de ce phénotype racinaire. Des analyses plus approfondies ont démontré que la différence phénotypique entre Brachypodium et Arabidopsis s'explique par une inversion de la fonction régulatrice dans la relation entre le réseau de signalisation par l'éthylène et la biosynthèse de l'auxine. L'analyse morphométrique utilisée dans l'étude précédente exploite le pipeline de traitement d'image de notre méthode d'histologie quantitative. Pendant la croissance secondaire, la symétrie bilatérale de l'hypocotyle est remplacée par une symétrie radiale et une organisation concentrique des tissus constitutifs. Ces tissus sont initialement composés d'une douzaine de cellules mais peuvent aisément atteindre des dizaines de milliers dans les derniers stades du développement. Cette échelle dépasse largement le seuil d'investigation par les moyens dits 'traditionnels' comme l'imagerie directe de tissus en profondeur. L'étude de ce système pendant cette phase de développement ne peut se faire qu'en réalisant des coupes fines de l'organe, ce qui empêche une compréhension des phénomènes cellulaires dynamiques sous-jacents. Nous y avons remédié en proposant une stratégie originale nommée, histologie quantitative. De fait, nous avons extrait l'information contenue dans des images de très haute résolution de sections transverses d'hypocotyles en utilisant un pipeline d'analyse et de segmentation d'image à grande échelle. Nous l'avons ensuite combiné avec un algorithme de reconnaissance automatique des cellules. Cet outil nous a permis de réaliser une description quantitative de la progression de la croissance secondaire révélant des schémas développementales non-apparents avec une inspection visuelle classique. La formation de pôle de phloèmes en structure répétée et espacée entre eux d'une longueur constante illustre les bénéfices de notre approche. Par ailleurs, l'exploitation approfondie de ces résultats a montré un changement de croissance anisotropique des cellules du cambium et du phloème qui semble en phase avec l'expansion du xylème. Combinant des outils génétiques et de la modélisation biomécanique, nous avons démontré que seule la croissance plus rapide des tissus internes peut produire une réorientation de l'axe de croissance anisotropique des tissus périphériques. Cette prédiction a été confirmée par le calcul du ratio des taux de croissance du xylème et du phloème au cours de développement secondaire ; des ratios élevés sont effectivement observés et concomitant à l'établissement progressif et tangentiel du cambium. Ces résultats suggèrent un mécanisme d'auto-organisation établi par un gradient de division méristématique qui génèrent une distribution de contraintes mécaniques. Ceci réoriente la croissance anisotropique des tissus périphériques pour supporter la croissance secondaire. - Plants are essential for human society, because our daily food, construction materials and sustainable energy are derived from plant biomass. Yet, despite this importance, the multiple developmental aspects of plants are still poorly understood and represent a major challenge for science. With the emergence of high throughput devices for genome sequencing and high-resolution imaging, data has never been so easy to collect, generating huge amounts of information. Computational analysis is one way to integrate those data and to decrease the apparent complexity towards an appropriate scale of abstraction with the aim to eventually provide new answers and direct further research perspectives. This is the motivation behind this thesis work, i.e. the application of descriptive and predictive analytics combined with computational modeling to answer problems that revolve around morphogenesis at the subcellular and organ scale. One of the goals of this thesis is to elucidate how the auxin-brassinosteroid phytohormone interaction determines the cell growth in the root apical meristem of Arabidopsis thaliana (Arabidopsis), the plant model of reference for molecular studies. The pertinent information about signaling protein relationships was obtained through the literature to reconstruct the entire hormonal crosstalk. Due to a lack of quantitative information, we employed a qualitative modeling formalism. This work permitted to confirm the synergistic effect of the hormonal crosstalk on cell elongation, to explain some of our paradoxical mutant phenotypes and to predict a novel interaction between the BREVIS RADIX (BRX) protein and the transcription factor MONOPTEROS (MP),which turned out to be critical for the maintenance of the root meristem. On the same subcellular scale, another study in the monocot model Brachypodium dystachion (Brachypodium) revealed an alternative wiring of auxin-ethylene crosstalk as compared to Arabidopsis. In the latter, increasing interference with auxin biosynthesis results in progressively shorter roots. By contrast, a hypomorphic Brachypodium mutant isolated in this study in an enzyme of the auxin biosynthesis pathway displayed a dramatically longer seminal root. Our morphometric analysis confirmed that more anisotropic cells (thinner and longer) are principally responsible for the mutant root phenotype. Further characterization pointed towards an inverted regulatory logic in the relation between ethylene signaling and auxin biosynthesis in Brachypodium as compared to Arabidopsis, which explains the phenotypic discrepancy. Finally, the morphometric analysis of hypocotyl secondary growth that we applied in this study was performed with the image-processing pipeline of our quantitative histology method. During its secondary growth, the hypocotyl reorganizes its primary bilateral symmetry to a radial symmetry of highly specialized tissues comprising several thousand cells, starting with a few dozens. However, such a scale only permits observations in thin cross-sections, severely hampering a comprehensive analysis of the morphodynamics involved. Our quantitative histology strategy overcomes this limitation. We acquired hypocotyl cross-sections from tiled high-resolution images and extracted their information content using custom high-throughput image processing and segmentation. Coupled with an automated cell type recognition algorithm, it allows precise quantitative characterization of vascular development and reveals developmental patterns that were not evident from visual inspection, for example the steady interspace distance of the phloem poles. Further analyses indicated a change in growth anisotropy of cambial and phloem cells, which appeared in phase with the expansion of xylem. Combining genetic tools and computational modeling, we showed that the reorientation of growth anisotropy axis of peripheral tissue layers only occurs when the growth rate of central tissue is higher than the peripheral one. This was confirmed by the calculation of the ratio of the growth rate xylem to phloem throughout secondary growth. High ratios are indeed observed and concomitant with the homogenization of cambium anisotropy. These results suggest a self-organization mechanism, promoted by a gradient of division in the cambium that generates a pattern of mechanical constraints. This, in turn, reorients the growth anisotropy of peripheral tissues to sustain the secondary growth.

Laser-MAG-hybridihitsauksen käyttöönotto laivan rungon valmistuksessa

Perinteisten kaarihitsausmenetelmien suhteellisen suuri lämmöntuonti aiheuttaa huomattavia muodonmuutoksia laivan rungon valmistusprosessin alkuvaiheessa. Muodonmuutosten seurauksena rakenteiden mitta- ja muototarkkuus heikkenee, mikä lisää oikaisu- ja sovitustyötä myöhemmissä työvaiheissa. Hitsausmuodonmuutoksia voidaan vähentää siirtymällä käyttämään laser-MAG-hybridihitsausta, jossa lämmöntuonti on merkittävästi pienempi kuin kaarihitsauksessa. Näin kyetään oleellisesti leikkaamaan oikaisu- ja sovitustyöstä syntyviä kustannuksia. Tämän diplomityön tavoitteena oli kehittää tuotantovalmiiksi kuitulaser- ja MAG-hitsauksen yhdistelmäprosessi Aker Yards Oy:n Turun telakalla loppuvuoden 2006 aikana. Hitsauslaitteiston asennus oli valmistunut kesäkuussa 2006, minkä jälkeen aloitettiin luokituslaitoksen hyväksymän koeohjelman hitsaukset. Käyttöönotto suunnitelmaan sisältyvä koehitsausohjelma oli laadittu Det Norske Veritaksen julkaisemaa ohjetta (Guidelines no. 19) mukaillen. Ensimmäiseksi määritettiin hitsauskokeiden avulla prosessille laadun ja tehokkuuden suhteen optimaalinen railogeometria. Seuraavaksi optimoitiin prosessin hitsausparametrit 6 mm:n aineenpaksuudelle hyödyntäen Taguchi-koesuunnittelumenetelmää. Tämän jälkeen optimiparametreilla hitsattiin koekappale väsytyskokeisiin, jotka suoritettiin Teknillisen korkeakoulun laivalaboratoriossa. Väsytyskoetulokset täyttivät luokituslaitoksen vaatimukset. Myös hitsauksen menetelmäkoe suoritettiin hyväksytetysti. Viimeinen koeohjelman mukainen hitsauskoesarja tehtiin prosessiparametrien sallittujen vaihtelurajojen määrittämiseksi. Diplomityön tavoite täyttyi joulukuussa 2006, jolloin 'laivan kansipaneeli hitsattiin ensimmäistä kertaa uudella hitsausprosessilla. Hitsauksen laatu korreloi hyvin menetelmäkokeen tulosten kanssa ¿ hitsit olivat tasalaatuisia ja ne täyttivät B-luokan vaatimukset.

Parhaat käyttökelpoiset tekniikat (BAT) perunankuorimoiden jätteiden käsittelyssä -käytäntöjä Euroopan maista

Yhä suurempi osa suurkeittiöistä ja ravintoloista käyttää ruuan valmistuksessa valmiiksi prosessoituja kasviksia, jotka hankitaan pääasiassa lähellä sijaitsevista tilakuorimoista. Kuorimoilla syntyy suuria määriä jätettä, enimmäkseen kuorijätteitä, multaa ja jätevettä. Tässä työssä tarkastellaan perunankuorimoiden kuorintamenetelmiä ja kuorintaprosessia, prosessissa syntyviä jätteitä ja niiden käsittelyä sekä ympäristöasioiden hallintamenetel-miä kuorimoilla Suomessa ja muissa EU-maissa. Työn tavoitteena oli selvittää, minkälainen on lainsäädäntö ja minkälaiset ovat kuorimotoimintaa koskevat lupakäytännöt Ruotsissa, Saksassa, Belgiassa ja Iso-Britanniassa. Lisäksi tavoitteena oli selvittää, onko näissä maissa määritelty, millainen on perunankuorimoille soveltuva paras käyttökelpoinen tekniikka (BAT) erityisesti jätteiden käsittelyssä. Euroopan yhteisön neuvoston direktiivi (96/61/EY) ympäristön pilaantumisen ehkäisemisen ja vähentämisen yhtenäistämiseksi edellyttää perunankuorimoilta toimintaansa ympäristöluvan. Laitosten koko, joilta ympäristölupa vaaditaan, vaihtelee suuresti eri maissa. Myös kuorimoiden jäteveden puhdistusvaatimukset vaihtelevat maittain. Belgi-assa ja Saksassa perunankuorimoilla syntyville jätevesille on asetettu päästöraja-arvot laissa. Kansallinen BAT-ohjeistus vihanneksia ja hedelmiä jatkojalostavalle teollisuudelleon tehty Belgiassa ja Iso-Britanniassa. Sen sijaan Saksassa ja Ruotsissa kansallista ohjeistusta ei ole tehty. Kansallisten BAT-ohjeistusten pohjalta Euroopan yhteisöjen komissio on julkaissut tammikuussa 2006 elintarviketeollisuudelle BAT-vertailuasiakirjan eli BREFin (BAT Referense Document), joissa kuvataan yleisellä tasolla BAT-tekniikoiksi sovitut tekniikat mm. perunan prosessoinnissa. Tässä työssä tuli ilmi, että kokoerot Suomen ja tässä työssä tarkasteltavien maiden kuo-rimoiden välillä ovat suuret. Voidaankin todeta, että tässä työssä tarkastelluissa BAT - ohjeistuksissa ja Euroopan komission BREF-dokumentissa esitetyt BAT-tekniikat etenkin jätevedenpuhdistuksessa eivät suoraan ole sovellettavissa Suomen olosuhteisiin kuorimoidemme pienestä koosta johtuen. Kiinteiden kuorintajätteiden käsittelyssä BAT-tekniikoiksi ulkomailla on määritelty lä-hinnä rehukäyttö, kompostointi ja peltoon levitys. Perunankuorimoiden jäteveden puhdistuksessa BAT-tekniikaksi Belgiassa on määritelty primääripuhdistus ja sekundääripuhdistus aerobisella menetelmällä. Iso-Britanniassapuolestaan BAT-tekniikkaa on primää-ripuhdistus, sekundääripuhdistus aerobisesti tai anaerobisesti ja tertiääripuhdistus, mikäli se on taloudellisesti mahdollista toteuttaa. Kuorijätteiden kompostointi on tällä hetkelläSuomessa melko harvinaista, sillä jätteiden suuri vesipitoisuus ja kylmä ilmastomme vaikeuttavat kompostointia. Kompostointimah-dollisuuksia ja kompostointiprosessin optimointia kuorintajätteille sopivaksi tulisikin tutkia tulevaisuudessa yhtenä jätteiden käsittelyvaihtoehtona. Kuorimoiden jätevesien puhdistuksessa tulevat Suomessa kysymykseen lähinnä yksinkertaiset kiinteistökohtaiset pienpuhdistamot, kuten panospuhdistamot. Pienpuhdistamolaitteistoihin liittyvää tutki-mus-ja kehitystyötä on viime vuosina tehty paljon ja sitä olisi tärkeää jatkaa edelleen, jotta löydettäisiin entistä kustannustehokkaampia ratkaisuja.

Développement et validation d'une méthode de calcul indépendant des unités moniteur basée sur les simulations Monte Carlo pour la vérification des traitements IMRT

Résumé : La radiothérapie par modulation d'intensité (IMRT) est une technique de traitement qui utilise des faisceaux dont la fluence de rayonnement est modulée. L'IMRT, largement utilisée dans les pays industrialisés, permet d'atteindre une meilleure homogénéité de la dose à l'intérieur du volume cible et de réduire la dose aux organes à risque. Une méthode usuelle pour réaliser pratiquement la modulation des faisceaux est de sommer de petits faisceaux (segments) qui ont la même incidence. Cette technique est appelée IMRT step-and-shoot. Dans le contexte clinique, il est nécessaire de vérifier les plans de traitement des patients avant la première irradiation. Cette question n'est toujours pas résolue de manière satisfaisante. En effet, un calcul indépendant des unités moniteur (représentatif de la pondération des chaque segment) ne peut pas être réalisé pour les traitements IMRT step-and-shoot, car les poids des segments ne sont pas connus à priori, mais calculés au moment de la planification inverse. Par ailleurs, la vérification des plans de traitement par comparaison avec des mesures prend du temps et ne restitue pas la géométrie exacte du traitement. Dans ce travail, une méthode indépendante de calcul des plans de traitement IMRT step-and-shoot est décrite. Cette méthode est basée sur le code Monte Carlo EGSnrc/BEAMnrc, dont la modélisation de la tête de l'accélérateur linéaire a été validée dans une large gamme de situations. Les segments d'un plan de traitement IMRT sont simulés individuellement dans la géométrie exacte du traitement. Ensuite, les distributions de dose sont converties en dose absorbée dans l'eau par unité moniteur. La dose totale du traitement dans chaque élément de volume du patient (voxel) peut être exprimée comme une équation matricielle linéaire des unités moniteur et de la dose par unité moniteur de chacun des faisceaux. La résolution de cette équation est effectuée par l'inversion d'une matrice à l'aide de l'algorithme dit Non-Negative Least Square fit (NNLS). L'ensemble des voxels contenus dans le volume patient ne pouvant être utilisés dans le calcul pour des raisons de limitations informatiques, plusieurs possibilités de sélection ont été testées. Le meilleur choix consiste à utiliser les voxels contenus dans le Volume Cible de Planification (PTV). La méthode proposée dans ce travail a été testée avec huit cas cliniques représentatifs des traitements habituels de radiothérapie. Les unités moniteur obtenues conduisent à des distributions de dose globale cliniquement équivalentes à celles issues du logiciel de planification des traitements. Ainsi, cette méthode indépendante de calcul des unités moniteur pour l'IMRT step-andshootest validée pour une utilisation clinique. Par analogie, il serait possible d'envisager d'appliquer une méthode similaire pour d'autres modalités de traitement comme par exemple la tomothérapie. Abstract : Intensity Modulated RadioTherapy (IMRT) is a treatment technique that uses modulated beam fluence. IMRT is now widespread in more advanced countries, due to its improvement of dose conformation around target volume, and its ability to lower doses to organs at risk in complex clinical cases. One way to carry out beam modulation is to sum smaller beams (beamlets) with the same incidence. This technique is called step-and-shoot IMRT. In a clinical context, it is necessary to verify treatment plans before the first irradiation. IMRT Plan verification is still an issue for this technique. Independent monitor unit calculation (representative of the weight of each beamlet) can indeed not be performed for IMRT step-and-shoot, because beamlet weights are not known a priori, but calculated by inverse planning. Besides, treatment plan verification by comparison with measured data is time consuming and performed in a simple geometry, usually in a cubic water phantom with all machine angles set to zero. In this work, an independent method for monitor unit calculation for step-and-shoot IMRT is described. This method is based on the Monte Carlo code EGSnrc/BEAMnrc. The Monte Carlo model of the head of the linear accelerator is validated by comparison of simulated and measured dose distributions in a large range of situations. The beamlets of an IMRT treatment plan are calculated individually by Monte Carlo, in the exact geometry of the treatment. Then, the dose distributions of the beamlets are converted in absorbed dose to water per monitor unit. The dose of the whole treatment in each volume element (voxel) can be expressed through a linear matrix equation of the monitor units and dose per monitor unit of every beamlets. This equation is solved by a Non-Negative Least Sqvare fif algorithm (NNLS). However, not every voxels inside the patient volume can be used in order to solve this equation, because of computer limitations. Several ways of voxel selection have been tested and the best choice consists in using voxels inside the Planning Target Volume (PTV). The method presented in this work was tested with eight clinical cases, which were representative of usual radiotherapy treatments. The monitor units obtained lead to clinically equivalent global dose distributions. Thus, this independent monitor unit calculation method for step-and-shoot IMRT is validated and can therefore be used in a clinical routine. It would be possible to consider applying a similar method for other treatment modalities, such as for instance tomotherapy or volumetric modulated arc therapy.

Developing Support for Scenario Process: A Scenario Study on Lappeenranta University of Technology from 2006 to 2016

Epävarmuus ei ole outoa enää julkishallinon alueellakaan. Globalisaation,tietotalous ja muut yksityissektoria ravistelleet ilmiöt ovat lisänneet mielenkiintoa erilaisiin tekniikoihin joilla voidaan lievittää epävarmuudesta aiheutuvia ongelmia. Tämä raportti kuvailee skenaariosuunnittelun käyttöä eräänä mahdollisuutena epävarmuuden hallintaan julkishallinnossa ja yksityissektorilla. Raportti sijoittuu samaan skenaariotutkimuksen jatkumoon edellisten LTY:ssä toteutettujen skenaariotutkimusten kanssa. tutkimus valottaa tutkimuksen ja käytännön työn nykytilaa helposti hyödynnettävässä muodossa. Rapostin kontribuutio on kuvata tutkimukseen perustuva tuettu skenaarioprosessi ja syntyneet skenaariot, keskittyen prosessin tukemiseen eri menetelmin.

Esiselvitys puupolttoaineen jalostamisesta torrefiointitekniikalla

Fossiilisten polttoaineiden käytöstä aiheutuvia kasvihuonekaasupäästöjä pyritään vähentämään EU:ssa mm. päästökaupan avulla. Uusiutumattomien polttoaineiden tilalle kehitetään biopolttoaineita, joita voidaan hyödyntää olemassa olevien voimalaitosten polttolaitteistoilla. Biopolttoaineiden etuna on, ettäniiden ei katsota lisäävän hiilidioksidipäästöjä, koska biomassa sitoo itseensä kasvaessaan poltossa vapautuvan määrän hiiltä. Eräs kiinnostavimmista jalostetuista biopolttoaineista on torrefioitu puu, joka vastaa useimmilta ominaisuuksiltaan kivihiiltä ja jota voidaan käyttää hiilivoimalaitoksissa ilman laitteistomuutoksia. Torrefiointi on puun eräänlaista paistamista hapettomissa olosuhteissa 250-270ºC:ssa, jolloin siitä saadaanpoistettua vesi ja osa haihtuvista aineista. Puun väri muuttuu suklaanruskeaksi, se kevenee, ei savuta poltettaessa, hylkii vettä, jauhautuu hyvin sekä sillä on pienet hiukkaspäästöt. Käsitellyn puun ominaisuudet muuttuvat säilyvyydeltään ja käyttöominaisuuksiltaan merkittävästi raaka-aineeseen verrattuna. Torrefioinnilla saavutetaan puulle polttoainekäytön kannalta myös paremmat ja kestävämmät ominaisuudet kuin hiiltämällä. Torrefiointiprosessia on tutkittu jonkin verran ja torrefioidun biomassan polttoa voimalaitosmittakaavassa on kokeiltu pienessä mittakaavassa. Torrefioitu materiaali on alhaisen tiheytensä vuoksi hankalaa ja kallista kuljettaa,joten sen tiheyttä tulee nostaa kuljetuksia varten tiivistämällä esim.pelletöimällä. Torrefionti yhdistettynä pelletöintiin on parhaimmillaan kilpailukykyinen vaihtoehto, kun kivihiiltä korvaavaa biomassaa jalostetaan kaukana käyttöpaikasta ja kuljetetaan irtotavarana aluskuljetuksina. Torrefioitua puuta on tiettävästi poltettu vain hollantilaisessa voimalaitoksessa. Tässä esiselvityksessä kootun tiedon perusteella torrefioidun puupolttoaineen tuottamiseen Suomen olosuhteissa arvioidaan olevan teknis-taloudellisia mahdollisuuksia. Kuitenkin torrefiointiprosessin soveltaminen suomen olosuhteisiin ja kotimaisiin raakaaineisiin vaatii panostusta jatkotutkimukseen ennen varsinaiseen toteutusvaiheeseen siirtymistä.

Mass transfer and particleinteractions in granular systems and suspension flows

The purpose of this study was to investigate some important features of granular flows and suspension flows by computational simulation methods. Granular materials have been considered as an independent state ofmatter because of their complex behaviors. They sometimes behave like a solid, sometimes like a fluid, and sometimes can contain both phases in equilibrium. The computer simulation of dense shear granular flows of monodisperse, spherical particles shows that the collisional model of contacts yields the coexistence of solid and fluid phases while the frictional model represents a uniform flow of fluid phase. However, a comparison between the stress signals from the simulations and experiments revealed that the collisional model would result a proper match with the experimental evidences. Although the effect of gravity is found to beimportant in sedimentation of solid part, the stick-slip behavior associated with the collisional model looks more similar to that of experiments. The mathematical formulations based on the kinetic theory have been derived for the moderatesolid volume fractions with the assumption of the homogeneity of flow. In orderto make some simulations which can provide such an ideal flow, the simulation of unbounded granular shear flows was performed. Therefore, the homogeneous flow properties could be achieved in the moderate solid volume fractions. A new algorithm, namely the nonequilibrium approach was introduced to show the features of self-diffusion in the granular flows. Using this algorithm a one way flow can beextracted from the entire flow, which not only provides a straightforward calculation of self-diffusion coefficient but also can qualitatively determine the deviation of self-diffusion from the linear law at some regions nearby the wall inbounded flows. Anyhow, the average lateral self-diffusion coefficient, which was calculated by the aforementioned method, showed a desirable agreement with thepredictions of kinetic theory formulation. In the continuation of computer simulation of shear granular flows, some numerical and theoretical investigations were carried out on mass transfer and particle interactions in particulate flows. In this context, the boundary element method and its combination with the spectral method using the special capabilities of wavelets have been introduced as theefficient numerical methods to solve the governing equations of mass transfer in particulate flows. A theoretical formulation of fluid dispersivity in suspension flows revealed that the fluid dispersivity depends upon the fluid properties and particle parameters as well as the fluid-particle and particle-particle interactions.