Methodology for real-time adaptation of tunnels support using the observational method

The observational method in tunnel engineering allows the evaluation in real time of the actual conditions of the ground and to take measures if its behavior deviates considerably from predictions. However, it lacks a consistent and structured methodology to use the monitoring data to adapt the support system in real time. The definition of limit criteria above which adaptation is required are not defined and complex inverse analysis procedures (Rechea et al. 2008, Levasseur et al. 2010, Zentar et al. 2001, Lecampion et al. 2002, Finno and Calvello 2005, Goh 1999, Cui and Pan 2012, Deng et al. 2010, Mathew and Lehane 2013, Sharifzadeh et al. 2012, 2013) may be needed to consistently analyze the problem. In this paper a methodology for the real time adaptation of the support systems during tunneling is presented. In a first step limit criteria for displacements and stresses are proposed. The methodology uses graphics that are constructed during the project stage based on parametric calculations to assist in the process and when these graphics are not available, since it is not possible to predict every possible scenario, inverse analysis calculations are carried out. The methodology is applied to the “Bois de Peu” tunnel which is composed by two tubes with over 500 m long. High uncertainty levels existed concerning the heterogeneity of the soil and consequently in the geomechanical design parameters. The methodology was applied in four sections and the results focus on two of them. It is shown that the methodology has potential to be applied in real cases contributing for a consistent approach of a real time adaptation of the support system and highlight the importance of the existence of good quality and specific monitoring data to improve the inverse analysis procedure.

Development of bioplastics from agro-wastes

Poster

Narrative innovations predict symptom improvement: Studying innovative moments in narrative therapy of depression

Objective:Innovative moments (IMs) are moments in the therapeutic dialog that constitute exceptions toward the client's problems. These narrative markers of meaning transformation are associated with change in different models of therapy and diverse diagnoses. Our goal is to test if IMs precede symptoms change, or, on the contrary, are a mere consequence of symptomatic 15 change. Method: For this purpose, IMs and symptomatology (Outcome Questionnaire-10.2) were assessed at every session in a sample of 10 cases of narrative therapy for depression. Hierarchical linear modeling was conducted to explore whether (i) IMs in a given session predict patients' symptoms in the following session and/or (ii) symptoms in a given session predict IMs in the next session. Results: Results suggested that IMs are better predictors of symptoms than the reverse. Conclusions: These results are discussed considering the contribution of meanings and narrative processes' changes to symptomatic improvement.

Development of a methodology to incorporate risk and uncertainty in electricity power planning

Dissertação de mestrado em Engenharia Industrial

Innovation in “low-tech” industries: Portuguese footwear industry

ICEIM – International Conference in Entrepreneurship and Innovation Management, Roma, 17-18 de setembro de 2015.

An innovative framework for probabilistic-based structural assessment with an application to existing reinforced concrete structures

A novel framework for probabilistic-based structural assessment of existing structures, which combines model identification and reliability assessment procedures, considering in an objective way different sources of uncertainty, is presented in this paper. A short description of structural assessment applications, provided in literature, is initially given. Then, the developed model identification procedure, supported in a robust optimization algorithm, is presented. Special attention is given to both experimental and numerical errors, to be considered in this algorithm convergence criterion. An updated numerical model is obtained from this process. The reliability assessment procedure, which considers a probabilistic model for the structure in analysis, is then introduced, incorporating the results of the model identification procedure. The developed model is then updated, as new data is acquired, through a Bayesian inference algorithm, explicitly addressing statistical uncertainty. Finally, the developed framework is validated with a set of reinforced concrete beams, which were loaded up to failure in laboratory.

A inovação, as marcas próprias e o private label no setor do calçado em Portugal

O sector do calçado português apresenta excelentes indicadores económicos e um desempenho competitivo assinalável. Os últimos quatro anos foram particularmente fortes, tendo Portugal atingido o 11º lugar entre os 15 maiores exportadores mundiais, com o segundo preço mais elevado por par de sapato vendido, superado apenas pela Itália. O artigo analisa o tipo de inovação realizada pelas empresas consideradas inovadoras dentro do sector do calçado em Portugal, de acordo com o manual de Oslo, e analisa a evolução que as empresas fizeram ao passarem de um regime dominado pelo private label para o desenvolvimento de produtos, de coleções e de marcas próprias. A pesquisa foi de natureza qualitativa, envolvendo sete empresas com inovação, sendo realizado estudos de caso através de entrevistas semi-estruturadas, análise de documentos e visitas às empresas e aos seus processos produtivos e de criação. Os resultados obtidos na investigação evidenciam uma relação entre os indicadores económicos e de desempenho e a existência de determinadas categorias de inovação. Evidencia ainda a relação existente entre o regime de produção e os indicadores económicos das empresas.

Assessment of innovative solutions for non-load bearing masonry enclosures

This paper presents some of the results of the research project “Masonry Enclosures” developed in the framework of the transnational access (TA) to LNEC’s triaxial shake table within the FP7 project SERIES.

Microscopy- or DNA-based analyses: Which methodology gives a truer picture of stream-dwelling decomposer fungal diversity?

We assessed aquatic hyphomycete diversity in autumn and spring on oak leaves decomposing in five streams along a gradient of eutrophication in the Northwest of Portugal. Diversity was assessed through microscopy-based (identification by spore morphology) and DNA-based techniques (Denaturing Gradient Gel Electrophoresis and 454 pyrosequencing). Pyrosequencing revealed five times greater diversity than DGGE. About 21% of all aquatic hyphomycete species were exclusively detected by pyrosequencing and 26% exclusively by spore identification. In some streams, more than half of the recorded species would have remained undetected if we had relied only on spore identification. Nevertheless, in spring aquatic hyphomycete diversity was higher based on spore identification, probably because many species occurring in this season are not yet connected to ITS barcodes in genetic databases. Pyrosequencing was a powerful tool for revealing aquatic hyphomycete diversity on decomposing plant litter in streams and we strongly encourage researchers to continue the effort in barcoding fungal species.

O evento levou... Comunicação de marca de uma cidade-sede

Tese de Doutoramento em Ciências da Comunicação - Especialidade em Comunicação Estratégica e Organizacional

Apoio à decisão na análise inteligente de reclamações

Dissertação de mestrado integrado em Engenharia e Gestão de Sistemas de Informação

Pervasive data mining engine

Dissertação de mestrado integrado em Engenharia e Gestão de Sistemas de Informação

Seismic behavior of concrete block masonry buildings

Tese de Doutoramento em Engenharia Civil

O ensino da flauta de bisel em grupo como inovação pedagógica: Uma investigação-ação no 2.º Ciclo do Ensino Básico

Tese de Doutoramento em Estudos da Criança (Especialidade em Educação Musical)