Theta burst stimulation improves overt visual search in spatial neglect independently of attentional load

Visual neglect is considerably exacerbated by increases in visual attentional load. These detrimental effects of attentional load are hypothesised to be dependent on an interplay between dysfunctional inter-hemispheric inhibitory dynamics and load-related modulation of activity in cortical areas such as the posterior parietal cortex (PPC). Continuous Theta Burst Stimulation (cTBS) over the contralesional PPC reduces neglect severity. It is unknown, however, whether such positive effects also operate in the presence of the detrimental effects of heightened attentional load. Here, we examined the effects of cTBS on neglect severity in overt visual search (i.e., with eye movements), as a function of high and low visual attentional load conditions. Performance was assessed on the basis of target detection rates and eye movements, in a computerised visual search task and in two paper-pencil tasks. cTBS significantly ameliorated target detection performance, independently of attentional load. These ameliorative effects were significantly larger in the high than the low load condition, thereby equating target detection across both conditions. Eye movement analyses revealed that the improvements were mediated by a redeployment of visual fixations to the contralesional visual field. These findings represent a substantive advance, because cTBS led to an unprecedented amelioration of overt search efficiency that was independent of visual attentional load.

Geographic Deregulation and Commercial Bank Performance in US State Banking Markets

This paper examines the effects of geographical deregulation on commercial bank performance across states. We reach some general conclusions. First, the process of deregulation on an intrastate and interstate basis generally improves bank profitability and performance. Second, the macroeconomic variables -- the unemployment rate and real personal income per capita -- and the average interest rate affect bank performance as much, or more, than the process of deregulation. Finally, while deregulation toward full interstate banking and branching may produce more efficient banks and a healthier banking system, we find mixed results on this issue.

La resistencia especial en el fútbol

La finalidad de esta tesis es establecer un análisis de la metodología de entrenamiento de la resistencia especial en el futbolista. Su objetivo no está vinculado a realizar propuestas prácticas de entrenamiento, sino más bien, se tratará de abordar una posible justificación fisiológico - metabólica, a partir de la relevancia bioenergética de la creatina, en función de la creciente especialización que debe ir adquiriendo el proceso del entrenamiento deportivo a largo plazo, enfocado al logro de altos rendimientos deportivos. A partir del análisis de conceptos terminológicos de referencia, se asienta la idea general de este trabajo, es decir, la estructuración y desarrollo de la resistencia en los deportes de conjunto, como el fútbol. Los pilares de una adecuada planificación son el conocimiento y la aplicación de distintas leyes y principios del entrenamiento deportivo y su relación con los distintos medios y métodos de entrenamiento, como así también, los efectos de adaptación que provocan. Por lo tanto, a partir del análisis de los requerimientos morfológicos - funcionales de las competiciones de elite en fútbol, se pueden elaborar modelos que servirán de base y como objetivo final al cual debe ser orientado el proceso de entrenamiento. Es decir, que un entrenamiento multianual con miras a la formación de futbolistas de elite, debe respetar la especialización creciente de las cargas de entrenamiento, estableciendo una sucesión metodológica adecuada en función de los objetivos de cada etapa. En función de lo expuesto, se realiza un análisis que va desde la resistencia como capacidad física y su metodología de entrenamiento, recorriendo distintos conceptos y manifestaciones, pasando por el análisis de distintas zonas de intensidad o áreas funcionales, y desembocando en la metodología de entrenamiento intermitente de la resistencia o resistencia especial -en los deportes de conjunto-. Y es a partir de todo el análisis precedente que estamos en condiciones de abordar el entrenamiento específico en el fútbol, y más detalladamente la resistencia específica o intermitente que requiere este deporte. El entrenamiento intermitente puede ser considerado como una metodología cuyo énfasis es puesto en modificaciones que se producen a nivel muscular, por sobre factores centrales de rendimiento, presentándose como una variante óptima para el entrenamiento de la resistencia muscular local y específica del futbolista. Básicamente, el entrenamiento intermitente actuaría sobre dos puntos centrales: la mejora del sistema shuttle de la CrP, y sobre la rapidez de entrega de oxígeno al inicio del ejercicio. Aquí aparece la importancia de la suplementación con Cr: que al aumentar las concentraciones del sustrato, y junto con el entrenamiento, que mejora las reacciones enzimáticas implicadas, potenciaría las mejoras buscadas con este tipo de metodología. Queda por determinar cual es el preciso mecanismo de acción por el cual la recuperación de los fosfatos altamente energéticos se produce: si por biogénesis mitocondrial en las fibras reclutadas - generalmente FT -; o mediante el sistema de proteínas transportadoras de Cr - destacando la importancia de las ST - o por algún otro mecanismo no conocido. Su descubrimiento permitiría direccionar más precisamente el entrenamiento deportivo.

La resistencia especial en el fútbol

La finalidad de esta tesis es establecer un análisis de la metodología de entrenamiento de la resistencia especial en el futbolista. Su objetivo no está vinculado a realizar propuestas prácticas de entrenamiento, sino más bien, se tratará de abordar una posible justificación fisiológico - metabólica, a partir de la relevancia bioenergética de la creatina, en función de la creciente especialización que debe ir adquiriendo el proceso del entrenamiento deportivo a largo plazo, enfocado al logro de altos rendimientos deportivos. A partir del análisis de conceptos terminológicos de referencia, se asienta la idea general de este trabajo, es decir, la estructuración y desarrollo de la resistencia en los deportes de conjunto, como el fútbol. Los pilares de una adecuada planificación son el conocimiento y la aplicación de distintas leyes y principios del entrenamiento deportivo y su relación con los distintos medios y métodos de entrenamiento, como así también, los efectos de adaptación que provocan. Por lo tanto, a partir del análisis de los requerimientos morfológicos - funcionales de las competiciones de elite en fútbol, se pueden elaborar modelos que servirán de base y como objetivo final al cual debe ser orientado el proceso de entrenamiento. Es decir, que un entrenamiento multianual con miras a la formación de futbolistas de elite, debe respetar la especialización creciente de las cargas de entrenamiento, estableciendo una sucesión metodológica adecuada en función de los objetivos de cada etapa. En función de lo expuesto, se realiza un análisis que va desde la resistencia como capacidad física y su metodología de entrenamiento, recorriendo distintos conceptos y manifestaciones, pasando por el análisis de distintas zonas de intensidad o áreas funcionales, y desembocando en la metodología de entrenamiento intermitente de la resistencia o resistencia especial -en los deportes de conjunto-. Y es a partir de todo el análisis precedente que estamos en condiciones de abordar el entrenamiento específico en el fútbol, y más detalladamente la resistencia específica o intermitente que requiere este deporte. El entrenamiento intermitente puede ser considerado como una metodología cuyo énfasis es puesto en modificaciones que se producen a nivel muscular, por sobre factores centrales de rendimiento, presentándose como una variante óptima para el entrenamiento de la resistencia muscular local y específica del futbolista. Básicamente, el entrenamiento intermitente actuaría sobre dos puntos centrales: la mejora del sistema shuttle de la CrP, y sobre la rapidez de entrega de oxígeno al inicio del ejercicio. Aquí aparece la importancia de la suplementación con Cr: que al aumentar las concentraciones del sustrato, y junto con el entrenamiento, que mejora las reacciones enzimáticas implicadas, potenciaría las mejoras buscadas con este tipo de metodología. Queda por determinar cual es el preciso mecanismo de acción por el cual la recuperación de los fosfatos altamente energéticos se produce: si por biogénesis mitocondrial en las fibras reclutadas - generalmente FT -; o mediante el sistema de proteínas transportadoras de Cr - destacando la importancia de las ST - o por algún otro mecanismo no conocido. Su descubrimiento permitiría direccionar más precisamente el entrenamiento deportivo.

La resistencia especial en el fútbol

La finalidad de esta tesis es establecer un análisis de la metodología de entrenamiento de la resistencia especial en el futbolista. Su objetivo no está vinculado a realizar propuestas prácticas de entrenamiento, sino más bien, se tratará de abordar una posible justificación fisiológico - metabólica, a partir de la relevancia bioenergética de la creatina, en función de la creciente especialización que debe ir adquiriendo el proceso del entrenamiento deportivo a largo plazo, enfocado al logro de altos rendimientos deportivos. A partir del análisis de conceptos terminológicos de referencia, se asienta la idea general de este trabajo, es decir, la estructuración y desarrollo de la resistencia en los deportes de conjunto, como el fútbol. Los pilares de una adecuada planificación son el conocimiento y la aplicación de distintas leyes y principios del entrenamiento deportivo y su relación con los distintos medios y métodos de entrenamiento, como así también, los efectos de adaptación que provocan. Por lo tanto, a partir del análisis de los requerimientos morfológicos - funcionales de las competiciones de elite en fútbol, se pueden elaborar modelos que servirán de base y como objetivo final al cual debe ser orientado el proceso de entrenamiento. Es decir, que un entrenamiento multianual con miras a la formación de futbolistas de elite, debe respetar la especialización creciente de las cargas de entrenamiento, estableciendo una sucesión metodológica adecuada en función de los objetivos de cada etapa. En función de lo expuesto, se realiza un análisis que va desde la resistencia como capacidad física y su metodología de entrenamiento, recorriendo distintos conceptos y manifestaciones, pasando por el análisis de distintas zonas de intensidad o áreas funcionales, y desembocando en la metodología de entrenamiento intermitente de la resistencia o resistencia especial -en los deportes de conjunto-. Y es a partir de todo el análisis precedente que estamos en condiciones de abordar el entrenamiento específico en el fútbol, y más detalladamente la resistencia específica o intermitente que requiere este deporte. El entrenamiento intermitente puede ser considerado como una metodología cuyo énfasis es puesto en modificaciones que se producen a nivel muscular, por sobre factores centrales de rendimiento, presentándose como una variante óptima para el entrenamiento de la resistencia muscular local y específica del futbolista. Básicamente, el entrenamiento intermitente actuaría sobre dos puntos centrales: la mejora del sistema shuttle de la CrP, y sobre la rapidez de entrega de oxígeno al inicio del ejercicio. Aquí aparece la importancia de la suplementación con Cr: que al aumentar las concentraciones del sustrato, y junto con el entrenamiento, que mejora las reacciones enzimáticas implicadas, potenciaría las mejoras buscadas con este tipo de metodología. Queda por determinar cual es el preciso mecanismo de acción por el cual la recuperación de los fosfatos altamente energéticos se produce: si por biogénesis mitocondrial en las fibras reclutadas - generalmente FT -; o mediante el sistema de proteínas transportadoras de Cr - destacando la importancia de las ST - o por algún otro mecanismo no conocido. Su descubrimiento permitiría direccionar más precisamente el entrenamiento deportivo.

Performance measurement integrated information framework in e-Manufacturing

The implementation of Internet technologies has led to e-Manufacturing technologies becoming more widely used and to the development of tools for compiling, transforming and synchronising manufacturing data through the Web. In this context, a potential area for development is the extension of virtual manufacturing to performance measurement (PM) processes, a critical area for decision making and implementing improvement actions in manufacturing. This paper proposes a PM information framework to integrate decision support systems in e-Manufacturing. Specifically, the proposed framework offers a homogeneous PM information exchange model that can be applied through decision support in e-Manufacturing environment. Its application improves the necessary interoperability in decision-making data processing tasks. It comprises three sub-systems: a data model, a PM information platform and PM-Web services architecture. A practical example of data exchange for measurement processes in the area of equipment maintenance is shown to demonstrate the utility of the model.

Electrocatalytic Performance of SiO2-SWCNT Nanocomposites Prepared by Electroassisted Deposition

Composite materials made of porous SiO2 matrices filled with single-walled carbon nanotubes (SWCNTs) were deposited on electrodes by an electroassisted deposition method. The synthesized materials were characterized by several techniques, showing that porous silica prevents the aggregation of SWCNT on the electrodes, as could be observed by transmission electron microscopy and Raman spectroscopy. Different redox probes were employed to test their electrochemical sensing properties. The silica layer allows the permeation of the redox probes to the electrode surface and improves the electrochemical reversibility indicating an electrocatalytic effect by the incorporation of dispersed SWCNT into the silica films.

Optimizing the performance of catalytic traps for hydrocarbon abatement during the cold-start of a gasoline engine

A key target to reduce current hydrocarbon emissions from vehicular exhaust is to improve their abatement under cold-start conditions. Herein, we demonstrate the potential of factorial analysis to design a highly efficient catalytic trap. The impact of the synthesis conditions on the preparation of copper-loaded ZSM-5 is clearly revealed by XRD, N2 sorption, FTIR, NH3-TPD, SEM and TEM. A high concentration of copper nitrate precursor in the synthesis improves the removal of hydrocarbons, providing both strong adsorption sites for hydrocarbon retention at low temperature and copper oxide nanoparticles for full hydrocarbon catalytic combustion at high temperature. The use of copper acetate precursor leads to a more homogeneous dispersion of copper oxide nanoparticles also providing enough catalytic sites for the total oxidation of hydrocarbons released from the adsorption sites, although lower copper loadings are achieved. Thus, synthesis conditions leading to high copper loadings jointly with highly dispersed copper oxide nanoparticles would result in an exceptional catalytic trap able to reach superior hydrocarbon abatement under highly demanding operational conditions.

A three-stage DEA model to evaluate learning-teaching technical efficiency: Key performance indicators and contextual variables

This study evaluates the technical efficiency of the learning-teaching process in higher education using a three-stage procedure that offers advances in comparison to previous studies and improves the quality of the results. First, it utilizes a multiple stage Data Envelopment Analysis (DEA) with contextual variables. Second, the levels of super efficiency are calculated in order to prioritize the efficiency units. And finally, through sensitivity analysis, the contribution of each key performance indicator (KPI) is established with respect to the efficiency levels without omission of variables. The analytical data was collected from a survey completed by 633 tourism students during the 2011/12, 2012/13 and 2013/14 academic course years. The results suggest that level of satisfaction with the course, diversity of materials and satisfaction with the teacher were the most important factors affecting teaching performance. Furthermore, the effect of the contextual variables was found to be significant.

Palm kernel meal in broiler diets: effect on chicken performance and health

An increase in the production of palm kernel meal (PKM) coupled with the concern for continued availability of conventional feedstuffs in some parts of the world has led to research to establish the maximum inclusion level of palm kernel meal in broiler diets. The results suggested that palm kernel meal has no anti-nutritional properties and thus its inclusion is safe up to at least 40% in the diet, provided the diet is balanced in amino acids and metabolisable energy. Although feed digestibility is decreased due to high dietary fibre when PKM is included in the diet, the feed intake is increased. This makes total digestible nutrient intake relatively high. beta-mannan is the main component of palm kernel meal non-starch polysaccharide (NSP). Both mannose and manno-oligosaccharides have been reported to act as prebiotics. The inclusion of palm kernel meal in the diet improves the immune system of birds and reduces pathogenic bacteria and increases the population of nonpathogenic bacteria in the intestine. These two benefits should be considered as strong recommendations for using palm kernel meal in broiler diets, particularly in palm kernel meal producing countries, not only for increasing bird productivity but also to improve chicken health. Selective enzyme addition increases feed efficiency and digestibility as well as decreasing the moisture content of faeces.

High- and low-volume resistance training similarly enhances functional performance in older adults

It is well known that resistance training improves muscle strength in older adults and may enhance or preserve functional performance. However, it is unclear if the volume of work undertaken in the elderly alters the response in functional performance. PURPOSE: To investigate the effect of a high- versus low-volume resistance training program on functional performance in older adults. METHODS: Thirty-two healthy men and women aged 65-78 years were randomly assigned to either a single-set (SS, n = 16) or 3-set (MS, n = 16) progressive resistance training program for 20 weeks. Groups trained 2 days per week using machine weights at 8 repetitions maximum (8-RM) for 7 upper and lower body exercises. Muscle strength was assessed by the 1-RM and functional performance by a battery of tests (repeated chair rise, usual and fast 6-m walk, 6-m backwards walk, floor rise to standing, stair climb, and 400-m walk time). RESULTS: Twenty-eight subjects completed the study. There was no difference between groups at baseline in muscle strength or functional performance. Whole body muscle strength significantly increased in both groups with greater gains in the 3-set group (MS 32.9 ± 3.1%; SS 18.6 ± 2.7%, mean ± SE; P < 0.01). Significant improvement (time effect, P < 0.01) occurred for both groups in the chair rise (MS 13.6 ± 3.2%; SS 10.2 ± 3.0%), 6-m backwards walk (MS 14.9 ± 3.3%; SS 14.3 ± 4.2%), stair climb (MS 6.4 ± 2.8%; SS 7.7 ± 3.1%) and 400-m walk (MS 7.4 ± 1.4%; SS 3.9 ± 1.2%). There were no interaction (group × time) effects for functional performance and no differences by sex. CONCLUSION: Resistance training that utilizes either a singleset or 3-set regimen may significantly and similarly improve functional performance in community-dwelling older adults. Enhancement of functional performance may prolong independence and improve quality of life. ©2004The American College of Sports Medicine

Traffic based energy consumption optimisation to improve the lifetime and performance of ad hoc wireless sensor networks

Ad hoc wireless sensor networks (WSNs) are formed from self-organising configurations of distributed, energy constrained, autonomous sensor nodes. The service lifetime of such sensor nodes depends on the power supply and the energy consumption, which is typically dominated by the communication subsystem. One of the key challenges in unlocking the potential of such data gathering sensor networks is conserving energy so as to maximize their post deployment active lifetime. This thesis described the research carried on the continual development of the novel energy efficient Optimised grids algorithm that increases the WSNs lifetime and improves on the QoS parameters yielding higher throughput, lower latency and jitter for next generation of WSNs. Based on the range and traffic relationship the novel Optimised grids algorithm provides a robust traffic dependent energy efficient grid size that minimises the cluster head energy consumption in each grid and balances the energy use throughout the network. Efficient spatial reusability allows the novel Optimised grids algorithm improves on network QoS parameters. The most important advantage of this model is that it can be applied to all one and two dimensional traffic scenarios where the traffic load may fluctuate due to sensor activities. During traffic fluctuations the novel Optimised grids algorithm can be used to re-optimise the wireless sensor network to bring further benefits in energy reduction and improvement in QoS parameters. As the idle energy becomes dominant at lower traffic loads, the new Sleep Optimised grids model incorporates the sleep energy and idle energy duty cycles that can be implemented to achieve further network lifetime gains in all wireless sensor network models. Another key advantage of the novel Optimised grids algorithm is that it can be implemented with existing energy saving protocols like GAF, LEACH, SMAC and TMAC to further enhance the network lifetimes and improve on QoS parameters. The novel Optimised grids algorithm does not interfere with these protocols, but creates an overlay to optimise the grids sizes and hence transmission range of wireless sensor nodes.

Flow patterns and performance of distillation trays

It is known that distillation tray efficiency depends on the liquid flow pattern, particularly for large diameter trays. Scale·up failures due to liquid channelling have occurred, and it is known that fitting flow control devices to trays sometirr.es improves tray efficiency. Several theoretical models which explain these observations have been published. Further progress in understanding is at present blocked by lack of experimental measurements of the pattern of liquid concentration over the tray. Flow pattern effects are expected to be significant only on commercial size trays of a large diameter and the lack of data is a result of the costs, risks and difficulty of making these measurements on full scale production columns. This work presents a new experiment which simulates distillation by water cooling. and provides a means of testing commercial size trays in the laboratory. Hot water is fed on to the tray and cooled by air forced through the perforations. The analogy between heat and mass transfer shows that the water temperature at any point is analogous to liquid concentration and the enthalpy of the air is analogous to vapour concentration. The effect of the liquid flow pattern on mass transfer is revealed by the temperature field on the tray. The experiment was implemented and evaluated in a column of 1.2 m. dia. The water temperatures were measured by thennocouples interfaced to an electronic computerised data logging system. The "best surface" through the experimental temperature measurements was obtained by the mathematical technique of B. splines, and presented in tenos of lines of constant temperature. The results revealed that in general liquid channelling is more imponant in the bubbly "mixed" regime than in the spray regime. However, it was observed that severe channelling also occurred for intense spray at incipient flood conditions. This is an unexpected result. A computer program was written to calculate point efficiency as well as tray efficiency, and the results were compared with distillation efficiencies for similar loadings. The theoretical model of Porter and Lockett for predicting distillation was modified to predict water cooling and the theoretical predictions were shown to be similar to the experimental temperature profiles. A comparison of the repeatability of the experiments with an errors analysis revealed that accurate tray efficiency measurements require temperature measurements to better than ± 0.1 °c which is achievable with conventional techniques. This was not achieved in this work, and resulted in considerable scatter in the efficiency results. Nevertheless it is concluded that the new experiment is a valuable tool for investigating the effect of the liquid flow pattern on tray mass transfer.

Entry modes and performance of foreign direct investment in China

How does a firm choose a proper model of foreign direct investment (FDI) for entering a foreign market? Which mode of entry performs better? What are the performance implications of joint venture (JV) ownership structure? These important questions face a multinational enterprise (MNE) that decides to enter a foreign market. However, few studies have been conducted on such issues, and no consistent or conclusive findings are generated, especially with respect to China. It’s composed of five chapters, providing corresponding answers to the questions given above. Specifically, Chapter One is an overall introductory chapter. Chapter Two is about the choice of entry mode of FDI in China. Chapter Three examines the relationship between four main entry modes and performance. Chapter Four explores the performance implications of JV ownership structure. Chapter Five is an overall concluding chapter. These empirical studies are based on the most recent and richest data that has never been explored in previous studies. It contains information on 11,765 foreign-invested enterprises in China in seven manufacturing industries in 2000, 10,757 in 1999, and 10,666 in 1998. The four FDI entry modes examined include wholly-owned enterprises (WOEs), equity joint ventures (EJVs), contractual joint ventures (CJVs), and joint stock companies (JSCs). In Chapter Two, a multinominal logit model is established, and techniques of multiple linear regression analysis are employed in Chapter Three and Four. It was found that MNEs, under the conditions of a good investment environment, large capital commitment and small cultural distance, prefer the WOE strategy. If these conditions are not met, the EJV mode would be of greater use. The relative propensity to pursue the CJV mode increases with a good investment environment, small capital commitment, and small cultural distance. JSCs are not favoured by MNEs when the investment environment improves and when affiliates are located in the coastal areas. MNEs have been found to have a greater preference for an EJV as a mode of entry into the Chinese market in all industries. It is also found that in terms of return on assets (ROA) and asset turnover, WOEs perform the best, followed by EJVs, CJVs, and JSCs. Finally, minority-owned EJVs or JSCs are found to outperform their majority-owned counterparts in terms of ROA and asset turnover.

Profit, productivity and price performance changes in the water and sewerage industry:an empirical application for England and Wales

This paper aims to analyse the impact of regulation in the financial performance of the Water and Sewerage companies (WaSCs) in England and Wales over the period 1991–2008. In doing so, a panel index approach is applied across WaSCs over time to decompose unit-specific index number-based profitability growth as a function of the profitability, productivity and price performance growth achieved by benchmark firms, and the catch up to the benchmark firm achieved by less productive firms. The results indicated that after 2000 there is a steady decline in average price performance, while productivity improves resulting in a relatively stable economic profitability. It is suggested that the English and Welsh water regulator is now more focused on passing productivity benefits to consumers, and maintaining stable profitability than it was in earlier regulatory periods. This technique is of great interest for regulators to evaluate the effectiveness of regulation and companies to identify the determinants of profit change and improve future performance, even if sample sizes are limited.