Good machine performance in Turing’s imitation game

In this paper we consider transcripts which originated from a practical series of Turing’s Imitation Game which was held on 23rd June 2012 at Bletchley Park, England. In some cases the tests involved a 3-participant simultaneous comparison of two hidden entities whereas others were the result of a direct 2-participant interaction. Each of the transcripts considered here resulted in a human interrogator being fooled, by a machine, into concluding that they had been conversing with a human. Particular features of the conversation are highlighted, successful ploys on the part of each machine discussed and likely reasons for the interrogator being fooled are considered. Subsequent feedback from the interrogators involved is also included

Human monstrosity: rape, ambiguity and performance in Rosemary’s Baby (Roman Polanski, 1968)

The narrative of Rosemary’s Baby hinges on a central hesitation between pregnancy induced madness and the existence of Satanism. Accordingly, the monstrous element is embodied in both the real and the supernatural: Rosemary’s husband Guy (John Cassavetes) is responsible for her victimisation through rape in either explanation. However, I will argue that the inherent ambiguity of the plot makes it difficult to place him as such a figure typical to the archetypal horror binaries of normality/monster, human/inhuman. By displacing generic convention the film complicates the issue of monstrosity, whilst simultaneously offering the possibility for the depiction of female experience of marriage to be at the centre of the narrative, for the real to be possibly of more significance than the supernatural. Previous writing has tended to concentrate on Rosemary and her pregnancy, so through detailed consideration of Cassavetes’ performance and its placement in the mise-en-scène this focus on Guy aims to demonstrate that he changes almost as much as Rosemary does. The chapter will focus on the film’s depiction of rape, during Rosemary’s nightmare and after it, in order to demonstrate how the notion of performance reveals Guy’s monstrousness and the difficulties this represents in our engagement with him.

Human misidentification in Turing tests

This paper presents some important issues on misidentification of human interlocutors in text-based communication during practical Turing tests. The study here presents transcripts in which human judges succumbed to theconfederate effect, misidentifying hidden human foils for machines. An attempt is made to assess the reasons for this. The practical Turing tests in question were held on 23 June 2012 at Bletchley Park, England. A selection of actual full transcripts from the tests is shown and an analysis is given in each case. As a result of these tests, conclusions are drawn with regard to the sort of strategies which can perhaps lead to erroneous conclusions when one is involved as an interrogator. Such results also serve to indicate conversational directions to avoid for those machine designers who wish to create a conversational entity that performs well on the Turing test.

Effect of instructive visual stimuli on neurofeedback training for motor imagery-based braincomputer interface

Event-related desynchronization (ERD) of the electroencephalogram (EEG) from the motor cortex is associated with execution, observation, and mental imagery of motor tasks. Generation of ERD by motor imagery (MI) has been widely used for brain-computer interfaces (BCIs) linked to neuroprosthetics and other motor assistance devices. Control of MI-based BCIs can be acquired by neurofeedback training to reliably induce MI-associated ERD. To develop more effective training conditions, we investigated the effect of static and dynamic visual representations of target movements (a picture of forearms or a video clip of hand grasping movements) during the BCI training. After 4 consecutive training days, the group that performed MI while viewing the video showed significant improvement in generating MI-associated ERD compared with the group that viewed the static image. This result suggests that passively observing the target movement during MI would improve the associated mental imagery and enhance MI-based BCIs skills.

Context relevant persuasive interaction and design: consideration of human factors influencing B2C persuasive interaction

The revolutions of electronic and mobile commerce have opened up unique opportunities for global marketing and business to consumer (B2C) persuasive interaction; with the aim of influencing user behavior. The success or failure of such persuasive interaction is impacted by cultural, social, and personal dimensions. Accordingly, failure to consider such dimensions risks the user forming a negative attitude towards retailer’s websites or mobile applications, which subsequently threatens customer behavior. A better understanding of human factors influencing the way people perceive B2C persuasive interaction is needed. This paper is introduces the concept of a context relevant persuasive interaction and proposes a guideline for designing relevant B2C persuasive interaction.

K-Surfer: a KNIME extension for the management and analysis of Human brain MRI FreeSurfer/FSL data

Human brain imaging techniques, such as Magnetic Resonance Imaging (MRI) or Diffusion Tensor Imaging (DTI), have been established as scientific and diagnostic tools and their adoption is growing in popularity. Statistical methods, machine learning and data mining algorithms have successfully been adopted to extract predictive and descriptive models from neuroimage data. However, the knowledge discovery process typically requires also the adoption of pre-processing, post-processing and visualisation techniques in complex data workflows. Currently, a main problem for the integrated preprocessing and mining of MRI data is the lack of comprehensive platforms able to avoid the manual invocation of preprocessing and mining tools, that yields to an error-prone and inefficient process. In this work we present K-Surfer, a novel plug-in of the Konstanz Information Miner (KNIME) workbench, that automatizes the preprocessing of brain images and leverages the mining capabilities of KNIME in an integrated way. K-Surfer supports the importing, filtering, merging and pre-processing of neuroimage data from FreeSurfer, a tool for human brain MRI feature extraction and interpretation. K-Surfer automatizes the steps for importing FreeSurfer data, reducing time costs, eliminating human errors and enabling the design of complex analytics workflow for neuroimage data by leveraging the rich functionalities available in the KNIME workbench.

Beneath a learning management system: understanding the human information interaction in information systems

Studies on learning management systems have largely been technical in nature with an emphasis on the evaluation of the human computer interaction (HCI) processes in using the LMS. This paper reports a study that evaluates the information interaction processes on an eLearning course used in teaching an applied Statistics course. The eLearning course is used as a synonym for information systems. The study explores issues of missing context in stored information in information systems. Using the semiotic framework as a guide, the researchers evaluated an existing eLearning course with the view to proposing a model for designing improved eLearning courses for future eLearning programmes. In this exploratory study, a survey questionnaire is used to collect data from 160 participants on an eLearning course in Statistics in Applied Climatology. The views of the participants are analysed with a focus on only the human information interaction issues. Using the semiotic framework as a guide, syntactic, semantic, pragmatic and social context gaps or problems were identified. The information interactions problems identified include ambiguous instructions, inadequate information, lack of sound, interface design problems among others. These problems affected the quality of new knowledge created by the participants. The researchers thus highlighted the challenges of missing information context when data is stored in an information system. The study concludes by proposing a human information interaction model for improving the information interaction quality issues in the design of eLearning course on learning management platforms and those other information systems.

Rotational aesthetics: Michael Bay and contemporary cinema’s machine movement

Digital imaging technologies enable a mastery of the visual that in recent mainstream cinema frequently manifests as certain kinds of spatial reach, orientation and motion. In such a context Michael Bay’s Transformers franchise can be framed as a digital re-tooling of a familiar fantasy of vehicular propulsion, US car culture writ large in digitally crafted spectacles of diegetic speed, the vehicular chase film ‘2.0’. Movement is central to these films, calling up Scott Bukatman’s observation that in spectacular visual media ‘movement has become more than a tool of bodily knowledge; it has become an end in itself’ (2003: 125). Not all movements and not all instances of vehicular propulsion are the same however. How might we evaluate what is at stake in a film’s assertion of movement as an end in itself, and the form that assertion takes, its articulations of diegetic velocity, corporeality, and spatial penetration? Deploying an attentiveness towards the specificity of aesthetic detail and affective impact in Bay’s delineation of movement, this essay suggests that the franchise poses questions about the relationship of human movement to machine movement that exceed their narrative basis. Identifying a persistent rotational trope in the franchise that in its audio-visual articulation combines oddly anachronistic elements (evoking the mechanical rather than the digital), the article argues that the films prioritise certain fantasies of transformation and spatial penetration, and certain modes of corporeality, as one response to contemporary debates about digital technologisation, sustainable energy, and cinematic spectacle. In this way the franchise also represents a particular moment in a more widely discernible preoccupation in contemporary cinema with what we might call a ‘rotational aesthetics’ of action, a machine movement made possible by the digital, but which invokes earlier histories and fantasies of animation, propulsion, mechanization and mechanization to particular ends.

Environmental factors and features that influence visual search in a 3D WIMP interface

The challenge of moving past the classic Window Icons Menus Pointer (WIMP) interface, i.e. by turning it ‘3D’, has resulted in much research and development. To evaluate the impact of 3D on the ‘finding a target picture in a folder’ task, we built a 3D WIMP interface that allowed the systematic manipulation of visual depth, visual aides, semantic category distribution of targets versus non-targets; and the detailed measurement of lower-level stimuli features. Across two separate experiments, one large sample web-based experiment, to understand associations, and one controlled lab environment, using eye tracking to understand user focus, we investigated how visual depth, use of visual aides, use of semantic categories, and lower-level stimuli features (i.e. contrast, colour and luminance) impact how successfully participants are able to search for, and detect, the target image. Moreover in the lab-based experiment, we captured pupillometry measurements to allow consideration of the influence of increasing cognitive load as a result of either an increasing number of items on the screen, or due to the inclusion of visual depth. Our findings showed that increasing the visible layers of depth, and inclusion of converging lines, did not impact target detection times, errors, or failure rates. Low-level features, including colour, luminance, and number of edges, did correlate with differences in target detection times, errors, and failure rates. Our results also revealed that semantic sorting algorithms significantly decreased target detection times. Increased semantic contrasts between a target and its neighbours correlated with an increase in detection errors. Finally, pupillometric data did not provide evidence of any correlation between the number of visible layers of depth and pupil size, however, using structural equation modelling, we demonstrated that cognitive load does influence detection failure rates when there is luminance contrasts between the target and its surrounding neighbours. Results suggest that WIMP interaction designers should consider stimulus-driven factors, which were shown to influence the efficiency with which a target icon can be found in a 3D WIMP interface.

Influence of pulse repetition rate of Er : YAG laser and dentin depth on tensile bond strength of dentin-resin interface

The study evaluated the in vitro influence of pulse-repetition rate of Er:YAG laser and dentin depth on tensile bond strength of dentin-resin interface. Dentin surfaces of buccal or lingual surfaces from human third molars were submitted to tensile test in different depths (superficial, 1.0 and 1.5 mm) of the same dental area, using the same sample. Surface treatments were acid conditioning solely (control) and Er:YAG laser irradiation (80 mJ) followed by acid conditioning, with different pulse-repetition rates (1, 2, 3, or 4 Hz). Single bond/Z-250 system was used. The samples were stored in distilled water at 37 degrees C for 24 h, and then the first test (superficial dentine) was performed. The bond failures were analyzed. Following, the specimens were identified, grounded until 1.0- and 1.5-mm depths, submitted again to the treatments and to the second and, after that, to third-bond tests on a similar procedure and failure analysis. ANOVA and Tukey test demonstrated a significant difference (p < 0.001) for treatment and treatment X depth interaction (p < 0.05). The tested depths did not show influence (p > 0.05) on the bond strength of dentin-resin interface. It may be concluded that Er:YAG laser with 1, 2, 3, or 4 Hz combined with acid conditioning did not increase the resin tensile bond strength to dentin, regardless of dentin depth. (C) 2007 Wiley Periodicals, Inc.

Effect of blood contamination on the shear bond strength at resin/dentin interface in primary teeth

Purpose: To assess in vitro the shear bond strength at the resin/dentin interface in primary teeth after contamination with fresh human blood. Methods: 75 crowns of primary molars were embedded in acrylic resin and mechanically ground to expose a flat dentin surface. The specimens were randomly assigned to five groups (n=15), according to the surface treatment. Group I (control) had no blood contamination. The other groups were blood-contaminated and subjected to different post-contamination protocols: in Group 2, the surfaces were rinsed with water; in Group 3, the surfaces were air-dried; in Group 4, the surfaces were rinsed and air-dried; and in Group 5, no post-contamination treatment was done. In all groups, a 3-mm dentin bonding site was demarcated, Single Bond adhesive system was applied and resin composite cylinders were bonded. After 24 hours in distilled water, shear bond strength was tested at a crosshead speed of 0.5 mm/minute. Results: Means (in MPa) were: Group 1: 7.1 (+/- 4.2); Group 2: 4.0 (+/- 1.8); Group 3: 0.9 (+/- 0.7); Group 4: 3.9 (+/- 2.2) and Group 5: 1.3 (+/- 1.5). Data were analyzed statistically by the Kruskal-Wallis test at 5% significance level. Groups 2 and 4 were similar to each other (P > 0.05) and both ware similar to Group 1 (P > 0.05). These groups (2, 3 and 4) had statistically significantly higher bond strengths than Groups 3 and 5 (P < 0.05). Blood contamination negatively affected the shear bond strength to primary tooth dentin. Among the blood-contaminated groups, water-rinsed specimens had higher bond strengths than those that were exclusively air-dried or not submitted to any post-contamination protocol before adhesive application.

Biomechanical effects of environmental and engineered particles on human airway smooth muscle cells

The past decade has seen significant increases in combustion-generated ambient particles, which contain a nanosized fraction (less than 100 nm), and even greater increases have occurred in engineered nanoparticles (NPs) propelled by the booming nanotechnology industry. Although inhalation of these particulates has become a public health concern, human health effects and mechanisms of action for NPs are not well understood. Focusing on the human airway smooth muscle cell, here we show that the cellular mechanical function is altered by particulate exposure in a manner that is dependent upon particle material, size and dose. We used Alamar Blue assay to measure cell viability and optical magnetic twisting cytometry to measure cell stiffness and agonist-induced contractility. The eight particle species fell into four categories, based on their respective effect on cell viability and on mechanical function. Cell viability was impaired and cell contractility was decreased by (i) zinc oxide (40-100 nm and less than 44 mu m) and copper(II) oxide (less than 50 nm); cell contractility was decreased by (ii) fluorescent polystyrene spheres (40 nm), increased by (iii) welding fumes and unchanged by (iv) diesel exhaust particles, titanium dioxide (25 nm) and copper(II) oxide (less than 5 mu m), although in none of these cases was cell viability impaired. Treatment with hydrogen peroxide up to 500 mu M did not alter viability or cell mechanics, suggesting that the particle effects are unlikely to be mediated by particle-generated reactive oxygen species. Our results highlight the susceptibility of cellular mechanical function to particulate exposures and suggest that direct exposure of the airway smooth muscle cells to particulates may initiate or aggravate respiratory diseases.

Machine vision for the automatic classification of images acquired from Non-destructive tests

This project is based on Artificial Intelligence (A.I) and Digital Image processing (I.P) for automatic condition monitoring of sleepers in the railway track. Rail inspection is a very important task in railway maintenance for traffic safety issues and in preventing dangerous situations. Monitoring railway track infrastructure is an important aspect in which the periodical inspection of rail rolling plane is required.Up to the present days the inspection of the railroad is operated manually by trained personnel. A human operator walks along the railway track searching for sleeper anomalies. This monitoring way is not more acceptable for its slowness and subjectivity. Hence, it is desired to automate such intuitive human skills for the development of more robust and reliable testing methods. Images of wooden sleepers have been used as data for my project. The aim of this project is to present a vision based technique for inspecting railway sleepers (wooden planks under the railway track) by automatic interpretation of Non Destructive Test (NDT) data using A.I. techniques in determining the results of inspection.

O sindicalismo e a administração publica

A dissertação aqui apresentada versa sobre uma temática nova, quer vista sob a ótica do nascimento do fato sociológico analisado - O Sindicalismo e a Administração Pública quer se considere a quase inexistência de fontes nas quais se possa abeberar, para que fosse possível estabelecer o fio condutor no desenvolvimento do tema. A temática foi analisada em dois planos: primeiro, fêz-se uma apreciação crítica da história do associativismo no Brasil, em sua simbiose com o aspecto social, com o lado econômico e com o lastro jurídico, ao ser analisado o caminho percorrido desde o primeiro clarão do Brasil até os dias presentes. Em segundo estágio, perquiriu-se a questão sindical, no que diz respeito à sua etiologia, o seu despertar mais consciente na década de 80 do nosso século, perpassando pela criação das Centrais Sindicais, ao serem detectados os desvios ideológicos, as contradições, a sua fisiologia em função de sua organização, ideário e ação na direção do que se propõem em nome de seus afiliados. Com efeito, o núcleo do trabalho se cinge à arregimentação do corpo de funcionários públicos com vistas a um eficaz - hoje, ainda muito incipiente - congraçamento, ao se deparar com uma forte resistência institucional, de vez que só a partir da Constituição de 1988, é que se abriu caminho para o direito de associação sindical a esse estamento dos agentes públicos. As disfunções são, aí, analisadas em relação ao despreparo dos Recursos Humanos no exercício de liderança e em confronto com a estrutura institucional anacrônica e de feitio autoritário, para fazer valer, de forma eficaz e efetiva, um bom desempenho da ação sindical, que se deseja genuína, autônoma e autógena, em função dos interesses de classe e a ter em vista a excelência dos serviços públicos; o fenômeno estudado, inversamente, mostra o processamento de uma luta sindical radicada em estrutura antidemocrática, em que o Estado financia os sindicatos e todo o aparelhamento sindical vertical, via contribuição sindical e a considerar que esse lastro sustentador da luta sindical é decalque de uma época de predominância de valores chauvinistas, exaltados no Brasil - e em outros países -, nas décadas de 30 e 40. Ainda foi feito um estudo comparativo com três modelos de sindicalismo, quais sejam: o francês, o alemão e o português. Os dois primeiros por razões de se constituirem em paradigmas de países centrais, tendo em vista que: (1) a França é modelo inspirador das instituições ocidentais, em sede político-jurídico-social, haja vista a sua História prenhe de fatos solapadores do statu quo ante; e (2) a Alemanha, por ter uma classe eficazmente institucionalizada de agentes públicos, tendo tradição araigada desde a burocracia prussiana, o que dá o toque de elevado profissionalismo a esses agentes públicos, os quais contam com uma agremiação sindical que guarda independência com relação ao movimento sindical do trabalhador privado, este, também consolidado em poderosa organização sindical naquele país. Portugal aparece no trabalho como o ascendente cultural do Brasil, o que implica em ser mostrado o nascedouro sindical desse país, dentro do clima cultural em que viveu e vive a península lusitana, e com isso se tenta elucidar o estágio de seu sindicalismo, as suas disfunções e auto funções , as suas semelhanças com o modelo brasileiro, as suas inclinações e natureza. As conclusões aferidas registram alguns aspectos relevantes: 1º) o Brasil nasceu de uma Administração centralizadora, marcada por uma máquina administrativa ineficaz, ineficiente, com a marca do Estato-império e sem a presença da construção concomitante de uma nação que é retardatária no assentar a viga da cidadania, o que levou a delongar a formação dos anseios e do espírito genuinamente autóctones. A repressão ao desenvolvimento das letras foi um entrave à criação de um espírito de povo, com a variante de ser uma maioria inculta, massacrantemente iletrada, em meio a uma pirâmide social em que se registrava apenas uma base desmesurada e um vértice acanhado, sem ter de permeio outras classes sociais que pudessem ser ou vir a ser estratificadas. Na esteira desses elementos, concluiu-se que: 2º) o movimento associativo é uma realidade incipiente e adormecido durante séculos, o que desbordou em uma apatia que só hoje começa a ser sacudida, através dos movimentos associativistas e sindical, este último nascido no meio das fábricas e estendido a algumas capitais de maior relevância política ou de maior peso econômico. o aspecto de maior magnitude para o trabalho foi a sinalização aberta aos servidores públicos para que se sindicalizassem, do que decorreu a conclusão de que essa ação precisa ser tangenciada e carreada a ser um movimento mais autenticamente ligado aos interesses da classe, pois por desvirtuamento contingencial em face da iniciante pouca expressão e inexperiência desse estamento, a ação sindical desses servidores sempre esteve à ilharga do movimento sindical do trabalhador privado, o qual tem outra linha de ação direcionada a interesses mais ligados ao conflito trabalho vs. capital, interesses esses que não se coadunam e nem se identificam com as aspirações e necessidades do funcionalismo público, mesmo que, muitas vezes, a questão do conflito desses agentes tenha uma interface no conjunto da pauta de reivindicação dos trabalhadores privados, ou seja, a questão salarial. O imperativo maior - e esta é a base da recomendação mais substancial - é conduzir a ação dos agentes públicos de forma heterodoxa na direção de se independentizar o movimento sindical desses agentes, a ser impulsionado pelas suas peculiaridades e por sua essencialidade ditada pela sua ontologia de servidores da coisa pública e tendo o público como sua clientela. Este é, em síntese, o caminho aqui trilhado.

A situation awareness interface for a bi-wheeled industrial hovercraft: design, development and evaluation

The intention of this thesis is to develop a prototype interface that enables an operator to control a bi-wheeled industrial hovercraft that will work within a fusion power plant if the automation system fails. This fusion power plant is part of the ITER project a conjoint effort of various industrialized countries to develop cleaner sources of energy. The development of the interface prototype will be based on situation awareness concepts, which provide a means to understand how human operators perceive the world around, then process that information and make decisions based on the knowledge that they already have and the projected knowledge of the reactions that will occur in the world in response to the actions the operator makes. Two major situation awareness methods will be used, GDTA as a means to discover the requirements the interface needs to solve, and SAGAT to conduct the evaluation on the three interfaces. This technique can isolate the differences an operator has in situation awareness when presented with relevant information given by each of the three interfaces that were built for this thesis. Where the first interface presents the information within the operator’s focal point of view in a pictorial style, the second interface shows the same information within the same point of view has the first interface but only shows it in a textual manner. While the third interface shows the relevant information in the operator’s peripheral field of view. Also SAGAT can provide insight on the question to know if providing the operator with feed-forward information about the stoppage distances of the bi-wheeled industrial hovercraft has any effect on the operator’s decision making.